Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Physical Sciences and Mathematics (5938)
- Energy Systems (5642)
- Other Mechanical Engineering (5097)
- Education (3629)
- Arts and Humanities (3531)
-
- Science and Mathematics Education (3481)
- History (3412)
- History of Science, Technology, and Medicine (3404)
- United States History (3404)
- Aerospace Engineering (3245)
- Materials Science and Engineering (3179)
- Manufacturing (2389)
- Electrical and Computer Engineering (1783)
- Engineering Science and Materials (1725)
- Civil and Environmental Engineering (1529)
- Applied Mechanics (1207)
- Chemical Engineering (1194)
- Ocean Engineering (1143)
- Computer-Aided Engineering and Design (1017)
- Biomedical Engineering and Bioengineering (1004)
- Heat Transfer, Combustion (998)
- Computer Engineering (960)
- Environmental Sciences (958)
- Operations Research, Systems Engineering and Industrial Engineering (920)
- Electro-Mechanical Systems (872)
- Acoustics, Dynamics, and Controls (837)
- Mechanics of Materials (817)
- Structural Materials (810)
- Institution
-
- University of Nebraska - Lincoln (4551)
- Missouri University of Science and Technology (2222)
- California Polytechnic State University, San Luis Obispo (1643)
- Brigham Young University (1345)
- University of Kentucky (1054)
-
- University of Central Florida (1014)
- University of Texas at Arlington (962)
- Michigan Technological University (839)
- Old Dominion University (815)
- University of Texas Rio Grande Valley (659)
- Purdue University (619)
- University of South Carolina (604)
- New Jersey Institute of Technology (572)
- Utah State University (515)
- Universitas Indonesia (508)
- Louisiana State University (452)
- National Taiwan Ocean University (445)
- University of Nevada, Las Vegas (396)
- University of Alabama at Birmingham (381)
- Washington University in St. Louis (376)
- Clemson University (372)
- University of Texas at El Paso (349)
- Portland State University (333)
- The University of Akron (331)
- Cleveland State University (321)
- University of Arkansas, Fayetteville (304)
- Wright State University (300)
- Central Washington University (262)
- Marquette University (254)
- Embry-Riddle Aeronautical University (235)
- Keyword
-
- Engineering (593)
- ASME (395)
- Conference (378)
- ECTC (378)
- Proceedings (378)
-
- Additive manufacturing (333)
- Mechanical Engineering (307)
- Applied sciences (297)
- Buildings (287)
- Optimization (260)
- Gas (253)
- And Energy; Structural Materials; Sustainability (248)
- Energy Systems; Environmental Indicators and Impact Assessment; Environmental Monitoring; Mining Engineering; Oil (248)
- Additive Manufacturing (222)
- Simulation (216)
- CFD (213)
- Design (202)
- Manufacturing (202)
- Department of Mechanical and Materials Engineering (180)
- Heat transfer (173)
- Robotics (166)
- Composites (151)
- Department of Mechanical Engineering-Engineering Mechanics (151)
- Combustion (135)
- Finite element analysis (134)
- Machine learning (132)
- Computational fluid dynamics (131)
- Modeling (131)
- Microstructure (130)
- 3D printing (128)
- Publication Year
- Publication
-
- Nebraska Tractor Tests (3402)
- Theses and Dissertations (1705)
- Mechanical and Aerospace Engineering Faculty Research & Creative Works (1139)
- Mechanical Engineering (972)
- Faculty Publications (763)
-
- Masters Theses (701)
- Mechanical and Aerospace Engineering Theses - Archive (677)
- Electronic Theses and Dissertations (647)
- Department of Mechanical and Materials Engineering: Faculty Publications (620)
- Mechanical Engineering Faculty Publications (620)
- World of Coal Ash Proceedings (579)
- Mechanical & Aerospace Engineering Theses & Dissertations (553)
- FSEC Energy Research Center® (517)
- Theses (470)
- Journal of Marine Science and Technology–Taiwan (445)
- Makara Journal of Technology (440)
- Early Career Technical Journal (ECTJ) (378)
- Open Access Theses & Dissertations (335)
- Master's Theses (315)
- Dissertations, Master's Theses and Master's Reports (277)
- Industrial and Manufacturing Engineering (273)
- Mechanical and Aerospace Engineering Dissertations - Archive (266)
- Dissertations (261)
- Williams Honors College, Honors Research Projects (260)
- LSU Master's Theses (255)
- Doctoral Dissertations (253)
- Mechanical Engineering Design Project Class (242)
- All Undergraduate Projects (226)
- Theses and Dissertations--Mechanical and Aerospace Engineering (221)
- Mechanical Engineering ETDs (202)
- Publication Type
Articles 12631 - 12660 of 30103
Full-Text Articles in Mechanical Engineering
Group Q- Automatic Ball Launching Entity, Zachary White, Tim Grote, Joshua Norlin
Group Q- Automatic Ball Launching Entity, Zachary White, Tim Grote, Joshua Norlin
Mechanical Engineering Design Project Class
The goal of the project is to create a machine that can track and aim at a target and deliver a tennis ball at a safe speed. The machine can be calibrated to ensure accurate aim. The application of the product is for entertainment and sports training, with calibration being able to be used to make easy shots for fun, and difficult shot for training. The device uses a two-axis rotation, allowing it to aim up/down and left/right. The device uses a microprocessor to calculate aim based on position of target and knowledge about the strength of the firing mechanism.
Group F Drink Mixer - Mixotron, Rebecca Danielle Stone, Christina Bell, Devon Roell
Group F Drink Mixer - Mixotron, Rebecca Danielle Stone, Christina Bell, Devon Roell
Mechanical Engineering Design Project Class
Bars are a great setting for friends to meet and drink however there aren’t many special features that set one bar apart from the rest. What you won’t find in any bar today is robotic bartender able to make any drink to order. In addition, there are many ways to make certain drinks, allowing for much variation. Automating the cocktail making process eliminates the variation in alcohol levels and in ingredients used. In addition, it guarantees that a customer’s drink will not have anything in it that the customer does not explicitly see. Giving the customer options of existing drinks …
Mems 411 Design Project: Dry Ingredients Dispenser, David Robinson, Maya Wong, Elijah Kessler
Mems 411 Design Project: Dry Ingredients Dispenser, David Robinson, Maya Wong, Elijah Kessler
Mechanical Engineering Design Project Class
No abstract provided.
Habitat Use Of Blacktip Sharks (Carcharhinus Limbatus) At Fishing Piers, Kelsey L. Spencer
Habitat Use Of Blacktip Sharks (Carcharhinus Limbatus) At Fishing Piers, Kelsey L. Spencer
Electronic Theses and Dissertations
Blacktip sharks (Carcharhinus limbatus) can be observed near fishing piers throughout the summer along the northeast coast of South Carolina. These piers attract and support a wide variety of potential prey and sharks are able to forage on fishers’ discards with minimal energetic cost. I tagged 12 blacktip sharks with acoustic transmitters, monitored piers with acoustic receivers, and conducted pier-creel surveys to determine the habitat use of blacktip sharks at fishing piers, factors that influenced residence time and presence/absence at piers, and any cyclical patterns in visits to piers. Data were analyzed with pier association indices (PAI), mixed models, and …
Heterogeneous Anisotropy Index And Scaling In Multiphase Random Polycrystals, Muhammad Ridwan Murshed
Heterogeneous Anisotropy Index And Scaling In Multiphase Random Polycrystals, Muhammad Ridwan Murshed
Theses and Dissertations
Under consideration is the finite-size scaling of elastic properties in single and two-phase random polycrystals with individual grains belonging to any crystal class (from cubic to triclinic). These polycrystals are generated by Voronoi tessellations with varying grain sizes and volume fractions. By employing variational principles in elasticity, we introduce the notion of a 'Heterogeneous Anisotropy Index' and investigate its role in the scaling of elastic properties at finite mesoscales. The index turns out to be a function of 43 variables, 21 independent components for each phase and the volume fraction of either phase. Furthermore, the relationship between Heterogeneous Anisotropy Index …
Dry Ingredient Dispenser, Group S, 2017, Nick Caywood, Noelle T. Wojciechowsi
Dry Ingredient Dispenser, Group S, 2017, Nick Caywood, Noelle T. Wojciechowsi
Mechanical Engineering Design Project Class
We wanted to come up with a way to automate the process of measuring and dispensing dry ingredients for baking.
The Automatic Bartender, Richard Wu, Alex Nassar, Keegan Lathrum
The Automatic Bartender, Richard Wu, Alex Nassar, Keegan Lathrum
Mechanical Engineering Design Project Class
The automatic bartender will hold 2 liquors and 2 mixers. When the user selects the option to make a drink, the device will pour out the required amounts of liquid into a container, via tubing that feeds into the container. The container has an internal stirrer to mix the components together, and then empties into a cup. The end result is a finished cocktail, and the machine is designed for residential use.
2018 Asme Student Design Competition - Group T Senior Design Project, Thomas Hess, Anker Anderson, Drew Daugherty, Jack Dufelmeier
2018 Asme Student Design Competition - Group T Senior Design Project, Thomas Hess, Anker Anderson, Drew Daugherty, Jack Dufelmeier
Mechanical Engineering Design Project Class
The purpose of this project is to create a single soccer playing robot to compete in the 2018 ASME student design competition. The robot, along with spare parts and all other devices must fit inside a 50x50x50 cm box. This robot must be able to traverse the field via remote control and have the ability to control a tennis ball and shoot it with sufficient force.
Automated Color Selector, Mark Mcmillin, Mike Mehaffy, Nicholas Mcmillan, Andrew Krieger
Automated Color Selector, Mark Mcmillin, Mike Mehaffy, Nicholas Mcmillan, Andrew Krieger
Mechanical Engineering Design Project Class
Design, build, and sell a safe automated primary color dye mixer to schools for the purpose of teaching children how 12 secondary colors (and shades) on a color wheel can be made via the primary colors. The user will select the desired color (on a color wheel) and the machine will automatically deposit the correct amount of each primary color to create the selected color (or shade). The dye will diffuse in the cup, to create the desired color. Dye will be used in the machine so that if a mess is made, the cleanup is easy. However, we will …
Torsional Stiffness Measuring Device, Cheyne Shiroma, Clayton Over, Nadab Wubshet
Torsional Stiffness Measuring Device, Cheyne Shiroma, Clayton Over, Nadab Wubshet
Mechanical Engineering Design Project Class
This device will measure the torsional stiffness of a FSAE race car frame. Our design will apply a torsional load to the frame while simultaneously providing precise measurements required to calculate the applied load, displacement, angular deflection, and torsional stiffness. Unlike the most popular method of testing torsional stiffness by applying load with a lever, our device twists the frame using hydraulic bottle jacks with an integrated pressure gauge. This aspect enables precise control of the twist, and the pressure gauges provide the capability of load-measurement. The validity of measurements will be assessed by comparing results to theoretical calculations.
Tissue Stretching Device, Usama Ismail, Humza Ismail, Elvir Sarajlic
Tissue Stretching Device, Usama Ismail, Humza Ismail, Elvir Sarajlic
Mechanical Engineering Design Project Class
This tissue loading project consists of designing an apparatus that has two main functions. The first, and most obvious of these, being creating a device that will deform a band or disk of tissue with cells pre-seeded on them uniaxially while recording the stress and strain, specifically strain rate, that is applied to the tissue. While the deformation aspect of this device will be key, an equally important part of this project will be designing a part of our tissue loader that mimics the environmental chamber that the lab already uses or is compatible with the environmental chamber that is …
Conjugated Dynamic Modeling On Vanadium Redox Flow Battery With Non-Constant Variance For Renewable Power Plant Applications, Abu Nayem Md. Asraf Siddiquee
Conjugated Dynamic Modeling On Vanadium Redox Flow Battery With Non-Constant Variance For Renewable Power Plant Applications, Abu Nayem Md. Asraf Siddiquee
Student Theses and Dissertations
A parametric modeling study has been carried out to assess the impact of change in operating parameters on the performance of Vanadium Redox Flow Battery (VRFB). The objective of this research is to develop a computer program to predict the dynamic behavior of VRFB combining fluid mechanics, reaction kinetics, and electric circuit. The computer program was developed using Maple 2015 and calculations were made at different operating parameters. Modeling results show that the discharging time increases from 2.2 hours to 6.7 hours when the concentration of V2+ in electrolytes increases from 1M to 3M. The operation time during the charging …
Macroscopic Model Of A Cilium Appendage, Laura Barber, Rachel Mickelson, Wilson Roen, Isabella Merz
Macroscopic Model Of A Cilium Appendage, Laura Barber, Rachel Mickelson, Wilson Roen, Isabella Merz
Mechanical Engineering Design Project Class
The goal of this project is to develop a macroscopic model of the cilia appendage and a realistic testing environment for the model. The model should be created with materials that effectively replicate the material and mechanical properties of the appendage in the human body. Additionally, the testing environment should mimic the viscous fluid that surrounds cilia in the human body to allow for more accurate testing. The fluid’s flow should be parallel to the model and induce instability in the system. This instability should force the cilia model to oscillate like a flag in the wind. Upon completion of …
College Of Engineering Senior Design Competition Fall 2017, University Of Nevada, Las Vegas
College Of Engineering Senior Design Competition Fall 2017, University Of Nevada, Las Vegas
Fred and Harriet Cox Senior Design Competition Projects
Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …
Low-Cost Control Engineering Experiments, Megan Arduin
Low-Cost Control Engineering Experiments, Megan Arduin
Honors Theses
The disciplines found within the area of motion and controls is a vital element of each engineer’s education. The ability to understand and then control dynamic systems is a fundamental skill required for many working engineers today. The aim of this project is to further develop the tools and methods available to teach and prepare engineering students to effectively design control system architecture, and then successfully implement their design into real world systems. The main goal is to design an apparatus that can be used to teach control system methods and has an affordable price. There are few experiments where …
Boat-Lift Design And Analysis, Nathan Schick
Boat-Lift Design And Analysis, Nathan Schick
Honors Theses
A current in production 6000 lb. rated boat-lift is being sold at “Great Lake Lifts”. The lift was tested experimentally and proved to hold at least 8000 lb. The design team successfully modeled the current lift on Ansys to help the customer understand where the weakest points in the design were. Following the creation of the initial lift design, the design team proposed and tested modifications that could be made in order to make the lift more structurally sound. The initial lift had a maximum deflection of 0.43846 inches, a maximum stress of 15880 psi, and a safety factor of …
Energy Potentials Of Briquette Produced From Tannery Solid Waste, Olatunde Ajani Oyelaran, Faralu Muhammed Sani, Olawale Monsur Sanusi, Olusegun Balogun, Adeyinka Okeowo Fagbemigun
Energy Potentials Of Briquette Produced From Tannery Solid Waste, Olatunde Ajani Oyelaran, Faralu Muhammed Sani, Olawale Monsur Sanusi, Olusegun Balogun, Adeyinka Okeowo Fagbemigun
Makara Journal of Technology
The vast quantity of waste generated from industries is one of the serious outcomes of unplanned development, resulting into quantum of hazardous organic and inorganic waste generating daily. Proper waste management is a challenging issue that must be addressed adequately. This is, therefore, carried out with a view of assessing the energy and combustion quality of tannery solid waste with a view of converting them into briquettes for cooking, heating and small home industries and reducing the menace caused by tannery waste disposal. The results of the experiments showed that the combustion rate ranged between 0.171 and 0.217 g/min, the …
Adsorption Of Cu(Ii) Ions In Aqueous Solution Onto Limonia Acidissima Shellbased Activated Carbon: Kinetic And Isotherm Studies, Abrar Muslim, Syahiddin Dahlan Said, Gita Suci Hariati, Siti Fajar Karina, Fauzi Muhammad Djuned, Rizka Mulyawan
Adsorption Of Cu(Ii) Ions In Aqueous Solution Onto Limonia Acidissima Shellbased Activated Carbon: Kinetic And Isotherm Studies, Abrar Muslim, Syahiddin Dahlan Said, Gita Suci Hariati, Siti Fajar Karina, Fauzi Muhammad Djuned, Rizka Mulyawan
Makara Journal of Technology
Adsorption of Cu(II) ions from aqueous solution using activated carbon prepared from Limonia acidissima fruit shell (LAFS-AC) was conducted in batch mode experiments at pH 5 (±0.15), 100 rpm and 1 atm. The effects of contact time, initial Cu(II) ions concentration, KOH concentration, and adsorption temperature on Cu(II) ions adsorption capacity were investigated. Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy analyses were performed to investigate the active site and surface morphology of the LAFS-AC, respectively. The Cu(II) ions adsorption was fitted very well (R2 = 0.94 on average) to the pseudo second-order adsorption kinetic with the adsorption capacity and …
Experimental Study On Automatic Control For Collision Avoidance Of Ships, Daeng Paroka, Muhammad Fahmi Kamil, Andi Haris Muhammad
Experimental Study On Automatic Control For Collision Avoidance Of Ships, Daeng Paroka, Muhammad Fahmi Kamil, Andi Haris Muhammad
Makara Journal of Technology
Automatic control system is widely applied to control the ship direction or heading angle in accordance with the decided trajectory. Several methods for improving performance of control system have been developed such as Proportional-Integral-Derivative (PID) control and fuzzy logic based control. Within the last decade, application of automatic control system is not only for ship navigation but also for avoiding collision risk of ships in seaways. This paper discusses the application of automatic control system for avoiding ship collision by free running experiment. Fuzzy logic based control was developed using Mamdani Centroid method to estimate the necessary rudder angle in …
Indonesia’S Municipal Solid Waste 3r And Waste To Energy Programs, Farizal Farizal, Radityo Aji, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia
Indonesia’S Municipal Solid Waste 3r And Waste To Energy Programs, Farizal Farizal, Radityo Aji, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia
Makara Journal of Technology
Like most cities in the world, population in Indonesia continues to grow every year. Problems that can arise from this are the increasing amount of municipal solid waste (MSW) production and the growing demand for electricity. To deal with the problems, Indonesian government runs 3R (Reduce, Reuse and Recycle) and WTE (Waste to Energy) Programs simultaneously. 3R program aims to reduce the number of waste, while WTE program aims to generate electricity as an alternative energy source. This study aims to find out the optimal proportion of MSW treated through the 3R and WTE programs. For the purpose, a goal …
Study On Semiconductor Properties Of Acetylide-Thiourea Fabricated Onto Interdigitated Electrodes (Ides) Platform Towards Application In Gas Sensing Technology, Adibah Izzati Daud, Wan M. Khairul, M. I. N. Isa, Khairul Anuar Abdul Wahid
Study On Semiconductor Properties Of Acetylide-Thiourea Fabricated Onto Interdigitated Electrodes (Ides) Platform Towards Application In Gas Sensing Technology, Adibah Izzati Daud, Wan M. Khairul, M. I. N. Isa, Khairul Anuar Abdul Wahid
Makara Journal of Technology
In the past few decades, the unique properties of acetylide and thiourea moieties individually have attracted great attention from researchers in various fields to be developed in numerous applications in advanced materials technology, especially as an active layer in gas sensing devices. The molecular systems of acetylide and thiourea provide a wide range of electronic properties as they possess rigid π-systems in their designated structures. In this study, a derivative of acetylide-thiourea featuring N-(4[4-aminophenyl] ethynyl benzonitrile)-N’-(4-ethyl benzoyl) thiourea (TCN) has been synthesised with the general formula of ArC(O)NHC(S)NHC≡C)Ar adopted the system of D-π-A for the significant development of conductive materials. …
Experimental Study Of The Chimney Height Variation Against Double Pots Biomass Stove Performance, Faisal Faisal, Adi Setiawan, Wusnah Wusnah, Khairil Khairil, Luthfi Luthfi, Mona Fajriana
Experimental Study Of The Chimney Height Variation Against Double Pots Biomass Stove Performance, Faisal Faisal, Adi Setiawan, Wusnah Wusnah, Khairil Khairil, Luthfi Luthfi, Mona Fajriana
Makara Journal of Technology
This research aims to get optimal chimneys height of double pots biomass stove. Optimal chimneys height needs to provide best performance of the stove. Experimental study was done by varied the chimney heights. Water boiling test as the standard method was used to obtained stove performance for each chimney height variation. The results showed that best performance stove was the one with 1.65 cm chimney height, with thermal efficiency at 37.66%.
Assessment On Heck-Immine Derivatives As Organic Semiconductor Materials, Rafizah Rahamathullah, Lim Keemi, Wan M. Khairul
Assessment On Heck-Immine Derivatives As Organic Semiconductor Materials, Rafizah Rahamathullah, Lim Keemi, Wan M. Khairul
Makara Journal of Technology
This paper reports the synthetic, characterization and theoretical evaluation of new class of hybrid Heck-immine system involving mixed moieties of vinylene (C=C) and azomethines (CH=N) which has been successfully integrated into an addition of organic semiconducting materials. The assessment of 4-[(hexyloxyphenyl)methylene]amino)-4’-chloro-stilbene (HEXCS) based on Donor (D)-π-Acceptor (A) was evaluated as active semiconductor material candidates via several spectroscopic and analytical techniques. In turn, the investigation of its potential as dopant system in conductive film was successfully deposited on indium tin oxide (ITO) coated substrate via spin coating method. The relationship between electronic and optical properties, chemical modelling at molecular interactions and …
Innovation Of Hydrocarbon Investigation Using Audio-Magnetotelluric In Cepu Field, Indonesia, Iqbal Fauzi Aditama, Widodo Widodo
Innovation Of Hydrocarbon Investigation Using Audio-Magnetotelluric In Cepu Field, Indonesia, Iqbal Fauzi Aditama, Widodo Widodo
Makara Journal of Technology
An audio-magnetotelluric (AMT) survey has been performed at Cepu oil field located in Indonesia. The objective of this research is to detect resistivity structures of this important hydrocarbon rock. This research can be classified as an innovation in application of the AMT method for hydrocarbon exploration. The lack of seismic resolution has been provided by the AMT method, especially in the location of sub-basalt and sub-salt plays. In additional, the cost of AMT survey is quite low compared to seismic. The forward modelling is included in this research to understand the measurement data response from a mathematical model. In the …
Achieving Totally Local Anticoagulation On Blood Contacting Devices, Rana Gbyli, Anna Mercaldi, Harihara Sundaram, Kagya Amoako
Achieving Totally Local Anticoagulation On Blood Contacting Devices, Rana Gbyli, Anna Mercaldi, Harihara Sundaram, Kagya Amoako
Mechanical and Industrial Engineering Faculty Publications
The recent years have witnessed an increased activity in biocompatibility research aimed at limiting biomaterial-induced blood coagulation. From 2008 to 2016, a total of $36,946,764.00 USD was awarded in grants to 213 research proposals and as large as 50.4% ($18,627,854.00) of that award monies were distributed to 101 proposals over the fiscal years of FY14 to FY16 alone. However, the complexity in blood responses to biomaterials, variability in blood function between individuals and animal species, and differences in medical device application and test setting all continue to pose difficulties in making a breakthrough in this field. This review focuses on …
Exploring Energy, Comfort, And Building Health Impacts Of Deep Setback And Normal Occupancy Smart Thermostat Implementation, Zachary Ethan Alderman
Exploring Energy, Comfort, And Building Health Impacts Of Deep Setback And Normal Occupancy Smart Thermostat Implementation, Zachary Ethan Alderman
Graduate Theses and Dissertations
As smart thermostat adoption rates continue to increase, it becomes worthwhile to explore what unanticipated outcomes may result in their use. Specific attention was paid to smart thermostat impacts to deep setback and normal occupancy states in a variety of conditions while complying with the ventilation and temperature requirements of ASHRAE 90.2-2013. Custom weather models and occupancy schedules were generated to efficiently explore a combination of weather conditions, building constructions, and occupancy states. The custom modeling approach was combined with previous experimental data within the Openstudio graphics interface to the EnergyPlus building modeling engine. Results indicate smart thermostats add the …
3d Printed Pcu/Uhmwpe Polymeric Blends For Artificial Knee Meniscus, Raissa Araujo Borges
3d Printed Pcu/Uhmwpe Polymeric Blends For Artificial Knee Meniscus, Raissa Araujo Borges
Graduate Theses and Dissertations
3D printing was used to fabricate porous artificial knee meniscus material from biocompatible polymeric blends of polycarbonate-urethane (PCU) and ultra-high-molecular-weight polyethylene (UHMWPE) to enable “weep” lubrication that mimics the native meniscus. 3D printed and molded pure PCU, as well as molded PCU and UHMWPE, were used for comparison. Preliminary printing was done to evaluate the impact of process parameters on the results. The samples were subject to a variety of rotational oscillating friction and wear tests under simulated body fluid and loading conditions to replicate the natural motion of the knee. Results show that 3D printed PCU samples yielded a …
Rotordynamic Enhancement By Utilizing The Controlled Hydrostatic Injection Of Hybrid Air Foil Bearing, Behzad Zamanian Yazdi
Rotordynamic Enhancement By Utilizing The Controlled Hydrostatic Injection Of Hybrid Air Foil Bearing, Behzad Zamanian Yazdi
Mechanical and Aerospace Engineering Dissertations - Archive
Air foil bearings (AFBs) are introduced as promising bearings for oil-free turbomachinery applications. Air foil bearing (AFB) technology has made substantial advancement during the past decades and found its applications in various small turbomachinery. AFBs provide reliable operation at high speed and high temperature with negligible power loss. However, rotordynamic instability, friction and drag during the start/stop, and thermal management are still challenges for further application of the technology. Hybrid Air Foil Bearing (HAFB) technology utilizes the radial injection of externally pressurized air into the traditional hydrodynamic AFB’s film thickness through orifices attached to the top foil. HAFB is one …
Optimization Of Aircraft Tow Steered Composite Wing Structures, Micheal Chamberlain Henson
Optimization Of Aircraft Tow Steered Composite Wing Structures, Micheal Chamberlain Henson
Mechanical and Aerospace Engineering Dissertations - Archive
An efficient methodology for design of aircraft composite wing structures is presented. The developed approach provides a flexible and integrated strategy to leverage advantages of composite material tow steering to achieve more effective wing designs. This is accomplished by including the coupling between OML geometry, aerodynamics and structural response. Structural and aerodynamic analyses are derived from parametric aircraft geometry and assembled into a framework for aero-structural wing sizing. A Ritz equivalent plate solution is extended to model composite materials with variable fiber path geometry. The structural modeling approach is implemented to automate creation of both Ritz and finite element analyses. …