Mechanical Engineering Commons^™

Model Development To Assess Drug Delivery To Brain Tumors, Lisa Antoine, Roy Koomullil, Timothy M. Wick, Mohamed M. Selim

Early Career Technical Journal (ECTJ)

Section 3: Miscellaneous; pp. 73-79

Fruit Ripeness Estimation For Avocado Using Thermal Imaging, Sathish Kumar Gurupatham, Erhan Ilksoy, Nick Jacob, Kevin Van Der Horn

Early Career Technical Journal (ECTJ)

Section 3: Miscellaneous; p. 80

Automated Image Acquisition For Vehicle Inspection, Hannah Evans, Kevin Mcfall

Early Career Technical Journal (ECTJ)

Section 3: Miscellaneous; pp. 81-85

Structural Performance Of Wood-Based Bio-Composites Under Four-Point Bending, Maharshi Dave, Tejas Pandya, Jason Street

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 93-96

An Improved Method For Fragment Detection In Eulerian Hydrocodes, Kenneth Walls, David Littlefield

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 97-102

Dynamic Compressive Behavior And Energy Absorption Of Ddgs-Paulownia Wood Composite Using Shpb, Suman Babu Ukyam, Damian Stoddard, Brent Tisserat

Early Career Technical Journal (ECTJ)

Section 4: Materials; p. 103

Impact Behavior Of Microcrystalline Cellulose And Corn Starch Based Wood Bio-Composites Under High Strain Rate Compressive Loading, Maharshi Dave, Tejas Pandya, Jason Street

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 112-117

Compliant Mechanism Designs And Analysis, Hunter Kyle Horner, Hongkuan Lin, Sergi Franco Canchola, Michael Weitzel, Cody Delarosa, Ayse Tekes

Early Career Technical Journal (ECTJ)

Section 5: Mechanics; pp. 120-125

Mathematical Modelling Of A Fully Electric Vehicle With Four Inwheel Motors, Siyuan Zhang, Vladimir Vansevich

Early Career Technical Journal (ECTJ)

Section 5: Mechanics; pp. 126-129

Preliminary Thermal And Stress Analysis Of An Electrical Connection Acting As A Thermal Dam On A Nitinol Wire, Lloyd Donovan Balfour, Douglas Ross

Early Career Technical Journal (ECTJ)

Section 5: Mechanics; pp. 130-136

Lab Equipment Design For Undergraduate Machine Dynamics And Vibrations Courses, Michael Weitzel, Zach Marr, Julia Ortiz, Drew Farmer, Zikora Agbapu, Hunter Merrigan, Ayse Tekes

Early Career Technical Journal (ECTJ)

Section 5: Mechanics; pp. 137-141

Diginol: A Joule-Heated Binary-Partitioned Nitinol Actuator Design And Testing Methodology, Martin Dawson Holland, Douglas H. Ross

Early Career Technical Journal (ECTJ)

Section 5: Mechanics; pp. 142-149

An Integrated Microstructural-Nanomechanical-Chemical Approach To Examine Material-Specific Characteristics Of Cementitious Interphase Regions, Mahdieh Khedmati, Yong-Rak Kim, Joesph A. Turner, Hani Alanazi, Charles Nguyen

Department of Mechanical and Materials Engineering: Faculty Publications

Effective properties and structural performance of cementitious mixtures are substantially governed by the quality of the interphase region because it acts as a bridge transferring forces between aggregates and a binding matrix and is generally susceptible to damage. As alternative binding agents like alkali-activated precursors have obtained substantial attention in recent years, there is a growing need for fundamental knowledge to uncover interphase formation mechanisms. In this paper, two different types of binding materials, i.e., fly ash-based geopolymer and ordinary portland cement, were mixed with limestone aggregate to examine and compare the microstructures and nanomechanical properties of interphase region. To …

Neuroprotective And Anti-Inflammatory Effects Of Rhus Coriaria Extract In A Mouse Model Of Ischemic Optic Neuropathy, Saba Khalilpour, Ghazaleh Behnammanesh, Fouad Suede, Mohammed O. Ezzat, Jayadhisan Muniandy, Yasser Tabana, Mohamed B. K. Ahamed, Ali Tamayol, Amin Malik Shah Majid, Enrico Sangiovanni, Mario Dell'agli, Aman Shah Majid

Department of Mechanical and Materials Engineering: Faculty Publications

Modulating oxidative stresses and inflammation can potentially prevent or alleviate the pathological conditions of diseases associated with the nervous system, including ischemic optic neuropathy. In this study we evaluated the anti-neuroinflammatory and neuroprotective activities of Rhus coriaria (R. coriaria) extract in vivo. The half maximal inhibitory concentration (IC₅₀) for DPPH, ABTS and B-carotene were 6.79 ± 0.009 µg/mL, 10.94 ± 0.09 µg/mL, and 6.25 ± 0.06 µg/mL, respectively. Retinal ischemia was induced by optic nerve crush injury in albino Balb/c mice. The anti-inflammatory activity of ethanolic extract of R. coriaria (ERC) and linoleic acid (LA) on …

Molecular Doping Enabled Scalable Blading Of Efficient Hole-Transport-Layer-Free Perovskite Solar Cells, Wu-Qiang Wu, Qi Wang, Yanjun Fang, Yuchuan Shao, Shi Tang, Yehao Deng, Haidong Lu, Ye Liu, Tao Li, Zhibin Yang, Alexei Gruverman, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

The efficiencies of perovskite solar cells (PSCs) are now reaching such consistently high levels that scalable manufacturing at low cost is becoming critical. However, this remains challenging due to the expensive hole-transporting materials usually employed, and difficulties associated with the scalable deposition of other functional layers. By simplifying the device architecture, hole-transport-layer-free PSCs with improved photovoltaic performance are fabricated via a scalable doctor-blading process. Molecular doping of halide perovskite films improved the conductivity of the films and their electronic contact with the conductive substrate, resulting in a reduced series resistance. It facilitates the extraction of photoexcited holes from perovskite directly …

Development Of Ceramic 3d Printer Using Cold-Based Extrusion, Noah Naden

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Ai For Ground Robots For Autonomous Coverage Of Designated Areas, Danxue Huang

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Nonlinear Ocean Energy Harvester, Dane Sequeira

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

The scientific community has worked to extend communication networks, human safety programs, and environmental monitoring systems across continents, but has struggled to accomplish these same goals beyond the shoreline. Lack of offshore power is the greatest barrier restricting us from exploring the ocean because it is difficult to operate sensors without a reliable power source. Wave energy harvesting has been investigated as a solution; however, current methods have many shortcomings. Traditional ocean energy harvesters (e.g. buoys) extract energy from ocean waves by capturing the change in potential energy as the buoy travels vertically along the wave. A linear design, this …

Extending Maneuverability Of Internally Actuated Underwater Gliders, An Attempt To Develop An Open Platform For Research And Education, Saeedeh Ziaeefard

Dissertations, Master's Theses and Master's Reports

Increasing maneuverability of internally actuated Underwater Gliders (UGs) is inevitable due to high demands in underwater surveillance and reconnaissance missions where agility and stealthiness are the keys to success. High maneuverability is needed to provide the opportunity for optimal trajectory planning, planar motion smoothness, and re-planning adapting to the dynamic environments.

This work explores extending the maneuverability of underwater gliders through coupled improvement in mechanical design, efficient use of internal actuation, and motion planning strategy utilizing flight concatenation. The existence of five flight patterns ``advanced flight", inspired by air gliders, enabled solely by utilizing internal actuation are investigated: Circle, Oval …

Modelling And Analysis Of Chevy Volt Gen Ii Hybrid Vehicle In Electric Mode, Kaushik Surresh

Dissertations, Master's Theses and Master's Reports

The technical report discusses the high fidelity modelling of the powertrain of Chevy Volt Gen II Hybrid Vehicle in the Electric Mode. The overall objective of the powertrain model was to predict total energy consumed within 5% of experimental data for different drive cycles in Charge Depleting Mode. The following powertrain elements were modelled in Matlab and Simulink using parameters and performance maps provided by General Motors: battery, E-Motor, TPIM power electronics, transmission auxiliary pumps and spin losses.

An electric circuit based dynamic model of the Li-ion battery was developed. Static models of the E Motor, TPIM inverter, transmission auxiliary …

Deformation And Stress Averaging For Statistical Ensembles Of Particle Aggregate Mesoscale Models, Gerald Pekmezi, David Littlefield

Early Career Technical Journal (ECTJ)

Section 4: Materials; pp. 104-111

Mechanical Wear Debris Feature, Detection, And Diagnosis: A Review, Wei Hong, Wenjian Cai, Shaoping Wang, Mileta M. Tomovic

Engineering Technology Faculty Publications

Mechanical debris is an important product of friction wear, which is also a crucial approach to know the running status of a machine. Many studies have been conducted on mechanical debris in related fields such as tribology, instrument, and diagnosis. This paper presents a comprehensive review of these studies, which summarizes wear mechanisms (e.g., abrasive wear, fatigue wear, and adhesive wear) and debris features (e.g., concentration (number), size, morphology, and composition), analyzes detection methods principles (e.g., offline: spectrograph and ferrograph, and online: optical method, inductive method, resistive-capacitive method, and acoustic method), reviews developments of online inductive methods, and investigates the …

Effect Of High- And Low-Molecular-Weight Hyaluronic-Acid-Functionalized-Az31 Mg And Ti Alloys On Proliferation And Differentiation Of Osteoblast Cells, Sankalp Agarwal, Brendan Duffy, James Curtin, Swarna Jaiswal

Articles

The quality of patient care has increased dramatically in recent years because of the development of lightweight orthopedic metal implants. The success of these orthopedic implants may be compromised by impaired cytocompatibility and osteointegration. Biomimetic surface engineering of metal implants using biomacromolecules including hyaluronic acid (HA) has been used an effective approach to provide conditions favorable for the growth of bone forming cells. To date, there have been limited studies on osteoblasts functions in response to metal substrates modified with the hyaluronic acid of different molecular weight for orthopedic applications. In this study, we evaluated the osteoblasts functions such as …

Optimization Of Heat Sinks In A Range Of Configurations., Archibald Allswell Amoako

Electronic Theses and Dissertations

In this study, different heatsink geometries used for electronic cooling are studied and compared to each other to determine the most efficient. The goal is to optimize heat transfer of the heat sinks studied in a range of configuration based on fin geometry. Heat sinks are thermal conductive material devices designed to absorb and disperse heat from high-temperature objects (e.g. Computer CPU). Common materials used in the manufacturing of heat sinks are aluminum and copper due to their relatively high thermal conductivity and lightweight [1]. Aluminum is used as the material for the heatsinks studied in this research project. To …

High Temperature Polymer Composites Using Out-Of-Autoclave Processing, Sudharshan Anandan

Doctoral Dissertations

"High performance polymer composites possess high strength-to-weight ratio, corrosion resistance, and have design flexibility. Carbon/epoxy composites are commonly used aerospace materials. Bismaleimide based composites are used as a replacement for epoxy systems at higher service temperatures. Aerospace composites are usually manufactured, under high pressure, in an autoclave which requires high capital investments and operating costs. In contrast, out-of-autoclave manufacturing, specifically vacuum-bag-only prepreg process, is capable of producing low cost and high performance composites. In the current study, out-of-autoclave processing of high temperature carbon/bismaleimide composites was evaluated. The cure and process parameters were optimized. The properties of out-of-autoclave cured laminates compared …

Smart Augmented Reality Instructional System For Mechanical Assembly, Ze-Hao Lai

Masters Theses

"Quality and efficiency are pivotal indicators of a manufacturing company. Many companies are suffering from shortage of experienced workers across the production line to perform complex assembly tasks such as assembly of an aircraft engine. This could lead to a significant financial loss. In order to further reduce time and error in an assembly, a smart system consisting of multi-modal Augmented Reality (AR) instructions with the support of a deep learning network for tool detection is introduced. The multi-modal smart AR is designed to provide on-site information including various visual renderings with a fine-tuned Region-based Convolutional Neural Network, which is …

Multiscale Approaches Toward Advanced Lithium-Ion Battery: From Nano To Meso Scale, Susmita Sarkar

Masters Theses

“Battery performance and its degradation are determined by various aspects such as the transport of ions and electrons through heterogeneous internal structures composed of constituent particles, kinetic reactions at the interfaces, and a corresponding interplay between mechanical, chemical, and thermal responses. Further, modern battery materials require a variety of engineering processes such as coating, doping and mixing. As a result, in order to fully understand the behavior of the battery material and improve battery performance, it is necessary to understand and control the individual particle behavior and then connect it to the electrode. This study elucidated the physical phenomena associated …

Laser-Aided Additive Manufacturing Of Glass, John Michael Hostetler

Masters Theses

“This thesis presents various approaches for the laser-aided additive manufacturing of glass. First, a technique is investigated to create free-form, low to zero coefficient of thermal expansion structures out of silica-gel. A CO₂ laser was coupled through a gantry system and focused onto a binder-free silica-gel powder bed (15-40 μm particles). Prior to writing each layer, powder is dispensed by sifting it onto the build platform as opposed to a conventional wiper system, avoiding contacting and potentially damaging sensitive parts. After deposition, the parts are annealed in a furnace to increase their strength. The influence of various process parameters …

Geometric Optimization Of A Heaving Point Absorber Wave Energy Converter, Ian Riley

College of Graduate Studies: Theses & Dissertations

Wave energy shows significant potential for development into a competitive renewable energy source. Non-renewable resources are finite and contribute to adverse effects on the environment. Development of wave energy conversion devices that use heave motion as the primary driver for converting wave energy into electrical potential is explored through optimizing the geometry of an axisymmetric partially submerged buoy in deep water. The governing equations of motion and hydrodynamic forces are solved for in one degree of freedom using ANSYS Aqwa. An external PTO device is simulated to induce power capture in the system. Four different geometric shapes are tested and …

Structural And Aerodynamic Design, Procedure And Analysis Of A Small V-Shaped Vertical Axis Wind Turbine, Odari J. Whyte

College of Graduate Studies: Theses & Dissertations

Over the last two decades there has been a renewed interest in Vertical Axis Wind Turbines. This turbine configuration though unpopular for large-scale generation has found a niche market in the way of offshore energy harvesting. However, offshore wind has its challenges. In this thesis a detailed comprehensive study of a proposed V-shaped vertical axis turbine rotor is performed in order to examine its structural and aerodynamic characteristics. The design met and exceeded the safety parameters establish for test bed operation, showing a factor of safety of 1.87 with regard to fatigue stress response. A satisfactory fatigue stress design life …