Mechanical Engineering Commons^™

Cost Benefit Analysis Of Led Vs Florescent Lighting, Kurtis Clark, Phillip Humphrey

Student Research

Over the last few years, the state of Oklahoma has been looking at ways to reduce expenses to address concerns about a budget deficit. There have been efforts made to reduce expenses due to the use of energy. It has been said, when the lights are on, work is getting done. Running lights is therefore the cost of doing business. Our research examines the question, “is there a way to provide better lighting while operating at a lower cost.” This research examines the current lighting at Southwestern State University, primarily fluorescent lighting (FL), and a cost benefit analysis of switching …

Structural Transformations In Porous Glasses Under Mechanical Loading. Ii. Compression, Nikolai V. Priezjev, Maxim A. Makeev

Mechanical and Materials Engineering Faculty Publications

The role of porous structure and glass density in response to compressive deformation of amorphous materials is investigated via molecular dynamics simulations. The disordered, porous structures were prepared by quenching a high-temperature binary mixture below the glass transition into the phase coexistence region. With decreasing average glass density, the pore morphology in quiescent samples varies from a random distribution of compact voids to a porous network embedded in a continuous glass phase. We find that during compressive loading at constant volume, the porous structure is linearly transformed in the elastic regime and the elastic modulus follows a power-law increase as …

Materials And Methods To Fabricate Porous Structures Using Additive Manufacturing Techniques, Mohsen Ziaee

USF Tampa Graduate Theses and Dissertations

Additive Manufacturing (AM), as the name implies, produces three-dimensional objects by progressively adding material rather than cutting away unneeded material. Typically this is done by processing a series of cross-sections obtained from a Computer Aided Design (CAD) model of the object. AM systems can process liquid photopolymers and solid materials in form of powder, wire and laminates to create intricate geometries in a short lead time.

This superb capability of AM methods enables to locally suit the properties of the part for the desired function by incorporating the designed pores in the CAD model [2]. The pore gradient creation opens …

Frequency Response Of The Leap Motion Controller And Its Suitability For Measuring Tremor, Clay J. Kincaid, Austin C. Vaterlaus, Nathan R. Stanford, Steven Knight Charles

Faculty Publications

Although tremor is one of the most common movement disorders, it is evaluated using relatively coarse clinical scales. We propose to measure tremor in clinical settings using the Leap Motion Controller (LMC), which is a markerless motion capture sensor that has a low cost, zero set-up time, and dynamic accuracy of 1.2mm. However, the frequency response of the LMC has not been characterized, so its ability to track oscillations such as tremor is unknown. To characterize the frequency response of the LMC, we measured the position of a mannequin hand simultaneously with the LMC and a high-resolution encoder while the …

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore

Posters-at-the-Capitol

Piezoelectric materials have the unique ability to convert electrical energy to mechanical vibrations and vice versa. This project takes a stab to develop a reliable computational tool to simulate the vibration control of a novel “partial differential equation” model for a piezoelectric device, which is designed by integrating electric conducting piezoelectric layers constraining a viscoelastic layer to provide an active and lightweight intelligent structure. Controlling unwanted vibrations on piezoelectric devices (or harvesting energy from ambient vibrations) through piezoelectric layers has been the major focus in cutting-edge engineering applications such as ultrasonic welders and inchworms. The corresponding mathematical models for piezoelectric …

Analysis Of Printed Electronic Adhesion, Electrical, Mechanical, And Thermal Performance For Resilient Hybrid Electronics, Clayton Neff

USF Tampa Graduate Theses and Dissertations

Today’s state of the art additive manufacturing (AM) systems have the ability to fabricate multi-material devices with novel capabilities that were previously constrained by traditional manufacturing. AM machines fuse or deposit material in an additive fashion only where necessary, thus unlocking advantages of mass customization, no part-specific tooling, near arbitrary geometric complexity, and reduced lead times and cost. The combination of conductive ink micro-dispensing AM process with hybrid manufacturing processes including: laser machining, CNC machining, and pick & place enables the fabrication of printed electronics. Printed electronics exploit the integration of AM with hybrid processes and allow embedded and/or conformal …

System And Methods For Ventilation Through A Body Cavity, Mark A. Borden, Benjamin S. Terry

Department of Mechanical and Materials Engineering: Faculty Publications

A system and methods for the delivery of oxygen through a body cavity of a subject using oxygen microbubbles . Through circulation of oxygen microbubbles through the body cavity , oxygen and carbon dioxide exchange may occur . Overall improvement in extending survival rate time during emergency situations caused by pulmonary or similar oxygen - intake restricting injury and / or failure may be achieved through use of the invented system and methods .

Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly

Faculty Publications

In recent years, as a result of significant climate change, stringent windstorms are becoming more frequent than before. Given the threat that windstorms bring to people and property, wind/structural engineering research is imperative to improve the resilience of existing and new infrastructure, for community safety and assets protection. The Windstorm Impact, Science and Engineering (WISE) research program at Louisiana State University (LSU) focuses on creating new knowledge applicable to the mitigation of existing and new infrastructure, to survive and perform optimally under natural hazards. To achieve our research goals, we address two imperious challenges: (i) characterization of realistic wind forces …

Cfd Modeling On Hydrodynamic Characteristics Of Multiphase Counter-Current Flow In A Structured Packed Bed For Post-Combustion Co2 Capture, Li Yang, Fang Liu, Kozo Saito, Kunlei Liu

Mechanical Engineering Faculty Publications

Solvent-based post combustion CO₂ capture is a promising technology for industrial application. Gas-liquid interfaces and interactions in the packed bed are considered one of the key factors affecting the overall CO₂ absorption rate. Understanding the hydrodynamic characterizations within packed beds is essential to identify the appropriate enhanced mass transfer technique. However, multiphase counter-current flows in the structured packing typically used in these processes are complicated to visualize and optimize experimentally. In this paper, we aim to develop a comprehensive 3D multiphase, counter-current flow model to study the liquid/gas behavior on the surface of structured packing. The output from …

Semi-Annual Program Progress Performance Report For University Transportation Center Pppr#10, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

The Electric Vehicle Transportation Center (EVTC) supports the U.S. Department of Transportation's strategic goal of planning for near-term integration of alternative fuel vehicles as a means to build a sustainable transportation system. The project objectives are to evaluate technologies, standards, planning and policies to ensure seamless integration of electric vehicles (EVs) into a complex transportation network and electricity grid. The EVTC bridges the gap between deployment of electric vehicles and the traditional transportation system.

Simulation And Optimization Of A Sheathless Size-Based Acoustic Particle Separator, Shivaraman Asoda

USF Tampa Graduate Theses and Dissertations

Standing surface acoustic waves (SSAW) have been widely used for sorting of cells and particles. However, the major challenges faced with the acoustic driven separation process is the need for an optimized setup to achieve effective separation and the range of particles that can be separated. In this thesis, a custom simulation model is studied to investigate and optimize the separation of varying size particles in a sheathless acoustic separation platform that was developed in our research lab. Specifically, the effect of flowrate, pressure amplitude, wavelength and interdigitated transducers (IDTs) physical parameters on the separation efficiency is explored. We also …

Investigation Of Compression Strength Of Bliss Style Corrugated Fiberboard Boxes, Javier De La Fuente, Jay Singh, Rebecca Kisch, Soma Roy, Daan Peleman

Journal of Applied Packaging Research

The global demand for corrugated fiberboard is projected to experience a significant upsurge in the near future. Based on the end-use, packaging for processed and fresh food categories accounted for approximately 39% of the overall consumption of corrugated fiberboard in 2015. With key advantages such as providing an uninterrupted bottom, laminated corners for higher stacking strength, increased material use efficiency, side cutout options for display at retail and a wide range of styles over other styles of containers, Bliss style boxes find prominence in the agriculture sector. While numerous predictive strength models associating corrugated fiberboard material specifications to the box …

A Systematic Investigation Of Condensation Heat Transfer Using Asymmetric Micro-Scale Surfaces, Emily Brown

LSU Master's Theses

Asymmetric surfaces been shown to inducing unidirectional motion in the Leidenfrost regime; however, very minimal research has been conducted to investigate whether these surface can enhance condensation through the same means. The investigation of heat transfer of ratchets in condensation is a relatively untapped area of study, specifically ratchets with superhydrophobic properties. Anticipated difficulty lies in creating surfaces features or coatings that retain the ratchets and can adequately sustain optimal wetting state of Cassie-Baxter required to improve heat transfer performance during condensation. This study serves to investigate whether ratchets are a feasible surface feature to enhance condensation heat transfer. First, …

Engineering Viscoelastic Behavior Of Carbon Fiber Reinforced Polymer Composites With Nanoparticles For Controlling Deployment Of Aerospace Structures, Mark Scherbarth

Mechanical Engineering ETDs

The United States Air Force is focused on reducing mass and power consumption of spacecraft to increase their capabilities for space missions. Low mass and power consumption can be achieved by using composites with low density and high stiffness and utilizing few satellite components. One way to achieve reduced mass is by eliminating attendant deployment mechanisms consuming valuable power and mass allocations on spacecraft with deployable structures. Secondary systems are typically used to assist deployable space structures to ensure 100% success. A passively deployed space structure would be of great value to the Department of Defense and the commercial marketplace. …

Control Of Uncertain Dynamical Systems With Spatial And Temporal Constraints, Ehsan Arabi

USF Tampa Graduate Theses and Dissertations

The overarching objective of this dissertation is the development of feedback control frameworks for uncertain dynamical systems that are subject to spatial and/or temporal constraints. These spatiotemporal constraints usually arise from the physical and/or performance characteristics associated with a considered dynamical system in safety-critical applications, where synthesis and analysis of feedback control laws are not trivial. Specifically, the proposed control architectures in this dissertation mainly contribute to the model reference adaptive control and finite-time control literature. In particular, unlike existing model reference adaptive control approaches that are not capable of enforcing user-defined performance guarantees without an ad-hoc tuning process, the …

Ship-Port Interface : Analysis Of The Cost-Effectiveness Of Cold Ironing At Mombasa Port, Ronald Ssali

World Maritime University Dissertations

No abstract provided.

2020 Low Sulphur Regulation : The Underlying Potential To Improve The ‘Energy Efficiency Design Index’ Of Ships, Nawin Ranjan Sharma

World Maritime University Dissertations

No abstract provided.

Modelling Hybrid Renewable Energy System For Philippine Merchant Marine Academy : A Feasibility Study, Nayan Guimpayan

World Maritime University Dissertations

No abstract provided.

Novel Design And Synthesis Of Composite Nanomaterials For Lithium And Multivalent Ion Batteries, Wangwang Xu

LSU Doctoral Dissertations

Nowadays, the fast-increasing energy demand for efficient, sustainable and environmentally-friendly energy storage devices remains a significant and challenging issue. Lithium ion batteries (LIBs) have been widely used as commercial energy devices in portable electronics and also shown great promise in upcoming large-scale applications due to their advantages of environmental safety, efficiency in energy delivering and light weight. However, due to their limited capacity, energy densities and cycle ability, LIBs still need further improvement to expand their applications to a larger field, especially electric vehicle (EVs) and hybrid electric vehicles (HEVs), in which energy storage devices with large capacity and high …

Acoustic Source Localization With A Vtol Suav Deployable Module, Kory Olney

USF Tampa Graduate Theses and Dissertations

A real time acoustic direction-finding module has been developed to estimate the ele- vation and azimuth of an impulsive event while function aboard a small unmanned air- craft vehicle. The generalized cross-correlation with phase transform method was used to estimate time differences of arrival in an 8 channel microphone array. A linear least squares approach was used to calculate an estimate for the direction of arrival. In order to accomplish this task, a vertical takeoff and landing small unmanned aircraft system was assembled to host the direction finding module. The module itself is made up of an eight-channel synchronous analog-to-digital …

Acoustic Imaging With Metamaterial Luneburg Lenses, Yangbo Xie, Yangyang Fu, Zhetao Jia, Junfei Li, Chen Shen, Yadong Xu, Huanyang Chen, Steven A Cummer

Henry M. Rowan College of Engineering Departmental Research

The Luneburg lens is a spherically symmetrical gradient refractive index (GRIN) device with unique imaging properties. Its wide field-of-view (FoV) and minimal aberration have lead it to be successfully applied in microwave antennas. However, only limited realizations have been demonstrated in acoustics. Previously proposed acoustic Luneburg lenses are mostly limited to inherently two-dimensional designs at frequencies from 1 kHz to 7 kHz. In this paper, we apply a new design method for scalable and self-supporting metamaterials to demonstrate Luneburg lenses for airborne sound and ultrasonic waves. Two Luneburg lenses are fabricated: a 2.5D ultrasonic version for 40 kHz and a …

Evaluation Of The 20 L Dust Explosibility Testing Chamber And Comparison To A Modified 38 L Vessel For Underground Coal, Robert Quentin Eades, Kyle A. Perry, Catherine E. Johnson, Jacob Miller

Mining Engineering Faculty Research & Creative Works

The phenomenon of combustible dust explosions is present within many industries. Tests for explosibility of dust clouds per ASTM E1226 use a 20 L explosive chamber that places the combustible dust directly below the dispersion nozzle which generates a thorough mixture for testing purposes. However, in the underground coal mining industry, there are a number of geologic, mining, and regulatory factors that change the deposition scheme of combustible coal dust. This causes the atmosphere of a coal mine to have a variable rock dust-coal dust mixture at the time of ignition. To investigate the impact of this variable atmosphere, a …

Near-Infrared Chiral Plasmonic Metasurface Absorbers, Leixin Ouyang, Wei Wang, Daniel Rosenmann, David A. Czaplewski, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Chirality plays an essential role in the fields of biology, medicine and physics. However, natural materials exhibit very weak chiroptical response. In this paper, near-infrared chiral plasmonic metasurface absorbers are demonstrated to selectively absorb either the left-handed or right-handed circularly polarized light for achieving large circular dichroism (CD) across the wavelength range from 1.3 µm to 1.8 µm. It is shown that the maximum chiral absorption can reach to 0.87 and that the maximum CD in absorption is around 0.70. The current chiral metasurface design is able to achieve strong chiroptical response, which also leads to high thermal CD for …

An Experiment To Study The Gaseous Emissions Of A Gas Turbine Operated With Biodiesel As Fuel, David Lee Rochelle

Theses and Dissertations

A continually growing awareness of the finiteness of fossil fuel availability coupled with an ever better understanding of the negative effects of fossil fuel consumption has motivated a search for fuels that can be used in place of fossil fuels, but which can be derived from sustainable sources such as growable organic matter. While much work has been done to understand these substances and apply them on a larger scale (indeed, biodiesel is commonly included in commercially available diesel fuels at fuel pumps); the unique nature of the operating environment for aviation fuels has complicated the application of these substances …

Dynamic Optimization Of High-Altitude Solar Aircraft Trajectories Under Station-Keeping Constraints, Abraham Martin, Nathaniel Gates, Andrew Ning, John Hedengren

Faculty Publications

This paper demonstrates the use of nonlinear dynamic optimization to calculate energy- optimal trajectories for a high-altitude, solar-powered Unmanned Aerial Vehicle (UAV). The objective is to maximize the total energy in the system while staying within a 3 km mission radius and meeting other system constraints. Solar energy capture is modeled using the vehicle orientation and solar position, and energy is stored both in batteries and in potential energy through elevation gain. Energy capture is maximized by optimally adjusting the angle of the aircraft surface relative to the sun. The UAV flight and energy system dynamics are optimized over a …

Prediction Of Thermal Conductance At Liquid-Gas Interfaces Using Molecular Dynamics Simulations, James Gonzalez, Josue Ortega, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using Molecular Dynamics (MD) Simulations and Theoretical Calculations, We Study Heat Transfer Across Liquid-Gas Interfaces within a Planar Heat Pipe. to Determine the Thermal Conductance (Kapitza Conductance), GK, at the Interface, Two Heat Transfer Mechanisms, Namely, Conduction and Evaporation/condensation Are Considered. in the Case of Interfacial Heat Conduction, Gas Molecules, Particularly Non-Condensable Gas Molecules, Exchange Heat with Liquid Surfaces through Gas-Liquid Collisions, and the Theoretical Expression for GK is Derived from the Kinetic Theory of Gases. for Interfacial Heat Transfer by Evaporation or Condensation, the Theoretical Expression for GK is Derived from the Schrage Relationships. to Assess the Accuracies of …

First-Principles Study Of The Products Of Co2 Dissociation On Nickel-Based Alloys: Trends In Energetics With Alloying Element, Lynza H. Sprowl, Benjamin Adam, Julie D. Tucker, Líney Árnadóttir

Mechanical and Materials Engineering Faculty Publications and Presentations

Oxidation and corrosion of nickel and Ni-based alloys are a problem for many industrial applications, such as power plants that use supercritical CO2 as the working fluid. In supercritical CO2 environments, CO2 dissociates on the surface forming adsorbed CO and O, which can oxidize the surface. The adsorbed CO can further breakdown via direct CO dissociation or via the Boudouard reaction to form adsorbed C, which can in turn carburize the surface. Understanding how the adsorbed species interact with different Ni-based alloys can help guide the design of future alloys. The interactions of adsorbed O, C, and CO on the …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• ME Faculty Member Helps Plan REU Symposium in Alexandria

Sprout: Setting The Roots For The Futureof Astronautics, Trenton Draper, Dylan Ottum, Kiana Waters, Carly Fridlin

Von Braun Symposium Student Posters

No abstract provided.

Finite Element Failure Analysis Of Lattice Structures, Behzad Bahrami Babamiri, Andrew Minor

Von Braun Symposium Student Posters

No abstract provided.