Mechanical Engineering Commons^™

What Is A Bim Design Model?, James Peters, Malachy Mathews

Conference papers

The recent report into Building Information Management or BIM, by construction law experts May Winfield and Sarah Rock entitled “Winfield Rock Report” [1] gives reason to state that the UK architectural, engineering and construction industry or AEC, is hindered by the absence of a clear definition of Level 2 BIM. The ISO 19650-2 standard published in 2019, is based upon PAS1192-2:2013. The intent of ISO 19650-2 is to provide a road map to facilitate the standardisation of BIM process in a uniformed fashion. A key pillar of ISO 19650 is the “information cycle” and central to this is a federated …

Applied Deep Learning In Orthopaedics, William Stewart Burton Ii

Electronic Theses and Dissertations

The reemergence of deep learning in recent years has led to its successful application in a wide variety of fields. As a subfield of machine learning, deep learning offers an array of powerful algorithms for data-driven applications. Orthopaedics stands to benefit from the potential of deep learning for advancements in the field. This thesis investigated applications of deep learning for the field of orthopaedics through the development of three distinct projects.

First, algorithms were developed for the automatic segmentation of the structures in the knee from MRI. The resulting algorithms can be used to accurately segment full MRI scans in …

Side-To-Side Comparison Of Total Shoulder Arthroplasty And Intact Function In Individuals, Sarah Rose Walden

Electronic Theses and Dissertations

Total Shoulder Arthroplasty (TSA) is a surgery which replaces the shoulder joint, or the interface between the humerus and the scapula glenoid. To test TSA success, most prior research compares patients with TSA to healthy controls. However, the shoulder anthropometry, motion, and musculature of individuals varies widely across the population making it important to assess TSA performance in individuals. The overall goal of this study is to determine if patients with one of two TSA implant designs on one side achieve the same range of motion as their intact side, and if so to find if they compensate using increased …

Decentralized Hamiltonian Control Of Multi-Der Isolated Microgrids With Meshed Topology, Mohamed Toub, Rush Robinett, Mohamed Maaroufi, Ghassane Aniba

Michigan Tech Publications, Part 1

The new electricity grid of the future, smart grid, can be seen as the interconnection of multiple microgrids. These microgrids are usually composed of distributed energy resources (DERs) that connect to each other in different topologies. Therefore, the modeling and control of meshed microgrids are requisite. This paper presents a mathematical approach for the modeling and decentralized control of multi-DER isolated microgrids (ImGs) with a meshed topology. Based on the advanced control scheme: Hamiltonian surface shaping and power flow control (HSSPFC), decentralized controllers are designed independently using only local information. These controllers regulate the voltage at the point of common …

Optimization Of Turbine Design In Wind Farms With Multiple Hub Heights, Using Exact Analytic Gradients And Structural Constraints, Andrew P.J. Stanley, Andrew Ning, Katherine Dykes

Faculty Publications

Wind farms are generally designed with turbines of all the same hub height. If wind farms were designed with turbines of different hub heights, wake interference between turbines could be reduced, lowering the cost of energy (COE). This paper demonstrates a method to optimize onshore wind farms with two different hub heights using exact, analytic gradients. Gradient-based optimization with exact gradients scales well with large problems and is preferable in this application over gradient-free methods. Our model consisted of the following: a version of the FLOw Redirection and Induction in Steady-State wake model that accommodated three- dimensional wakes and calculated …

Numerical Simulations Of Premixed Flames Of Multi Component Fuels/Air Mixtures And Their Applications, Essa Kh I J Salem

Theses and Dissertations--Mechanical and Aerospace Engineering

Combustion has been used for a long time as a means of energy extraction. However, in the recent years there has been further increase in air pollution, through pollutants such as nitrogen oxides, acid rain etc. To solve this problem, there is a need to reduce carbon and nitrogen oxides through lean burning, fuel dilution and usage of bi-product fuel gases. A numerical analysis has been carried out to investigate the effectiveness of several reduced mechanisms, in terms of computational time and accuracy. The cases were tested for the combustion of hydrocarbons diluted with hydrogen, syngas, and bi-product fuel in …

Experimental And Numerical Characterization Of Multiphase Subsurface Oil Release, Feng Gao

Dissertations

Subsurface oil release is commonly encountered in the natural environment and engineering applications and has received the substantial attention of researchers after the disastrous Deepwater Horizon Blowout oil spill in 2009. The main focus on the present research is to systematically study the hydrodynamics of underwater oil jet under a variety of conditions, including the effect of dispersant and different gas to oil ratios (GOR) by using experimental measurement as well as a Computational Fluid Dynamics (CFD) approach, from which the measured turbulent characteristics (e.g., velocity, turbulent kinetic energy, turbulence dissipation rate, etc.) of underwater oil jet are thoroughly examined …

Performance Of C2H4 Reductant In Activated-Carbon-Supported Mnox-Based Scr Catalyst At Low Temperatures, Guangli Liu, Dongtai Han, Jie Cheng, Yongshi Feng, Wenbin Quan, Li Yang, Kozo Saito

Mechanical Engineering Faculty Publications

Hydrocarbons as reductants show promising results for replacing NH₃ in SCR technology. Therefore, considerable interest exists for developing low-temperature (< 200 °C) and environmentally friendly HC-SCR catalysts. Hence, C₂H₄ was examined as a reductant using activated-carbon-supported MnOx-based catalyst in low-temperature SCR operation. Its sensitivity to Mn concentration and operating temperature was parametrically studied, the results of which showed that the catalyst activity followed the order of 130 °C > 150 °C > 180 °C with an optimized Mn concentration near 3.0 wt.%. However, rapid deactivation of catalytic activity also occurred when using C₂H₄ as the reductant. The mechanism of deactivation was explored and is …

Development And Thermodynamic Analysis Of An Integrated Mild/Partial Gasification Combined Cycle (Impgc) Under Green And Brown Field Conditions With And Without Carbon Capture, Henry A. Long Iii

LSU New Orleans Theses and Dissertations

Coal is a very prominent energy source in the world, but it is environmentally unattractive due to its high sulfur and ash content as well as its alleged contribution towards climate change, but it is affordable, abundant, and has high energy content. Thus, utilizing coal in a cleaner and more efficient way has become necessary. One promising clean coal technology involves fully gasifying coal into synthesis gas, cleaning it, and feeding it into a high-efficiency combined cycle, such as an Integrated Gasification Combined Cycle (IGCC). Inspired by the recent success of warn gas cleanup (WGCU), mild and partial gasification are …

Dynamic Response Of A Hingeless Helicopter Rotor Blade At Hovering And Forward Flights, Pratik Sarker

LSU New Orleans Theses and Dissertations

The helicopter possesses the unrivaled capacity for vertical takeoff and landing which has made the helicopter suitable for numerous tasks such as carrying passengers and equipment, providing air medical services, firefighting, and other military and civil tasks. The nature of the aerodynamic environment surrounding the helicopter gives rise to a significant amount of vibration to its whole body. Among different sources of vibrations, the main rotor blade is the major contributor. The dynamic characteristics of the hingeless rotor consisting of elastic blades are of particular interest because of the strongly coupled equations of motion. The elastic rotor blades are subjected …

Feasible Form Parameter Design Of Complex Ship Hull Form Geometry, Thomas L. Mcculloch

LSU New Orleans Theses and Dissertations

This thesis introduces a new methodology for robust form parameter design of complex hull form geometry via constraint programming, automatic differentiation, interval arithmetic, and truncated hierarchical B- splines. To date, there has been no clearly stated methodology for assuring consistency of general (equality and inequality) constraints across an entire geometric form parameter ship hull design space. In contrast, the method to be given here can be used to produce guaranteed narrowing of the design space, such that infeasible portions are eliminated. Furthermore, we can guarantee that any set of form parameters generated by our method will be self consistent. It …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Georgia Southern Research Focus Prompts R2 Carnegie Designation

Additive Manufacturing Of Ti6al4v Alloy: A Review, Shunyu Liu, Yung C. Shin

School of Mechanical Engineering Faculty Publications

In this paper, the recent progress on Ti6Al4V fabricated by three mostly developed additive manufacturing (AM) techniques-directed energy deposition (DED), selective laser melting (SLM) and electron beammelting (EBM)-is thoroughly investigated and compared. Fundamental knowledge is provided for the creation of links between processing parameters, resultant microstructures and associated mechanical properties. Room temperature tensile and fatigue properties are also reviewed and compared to traditionally manufactured Ti6Al4V parts. The presence of defects in as-builtAMTi6Al4V components and the influences of these defects on mechanical performances are also critically discussed.

Coordinated Unmanned Aircraft System (Uas) And Ground-Based Weather Measurements To Predict Lagrangian Coherent Structures (Lcss), Peter J. Nolan, James Pinto, Javier González-Rocha, Anders Jensen, Christina N. Vezzi, Sean C. C. Bailey, Gijs De Boer, Constantin Diehl, Roger Laurence Iii, Craig W. Powers, Hosein Foroutan, Shane D. Ross, David G. Schmale Iii

Mechanical Engineering Faculty Publications

Concentrations of airborne chemical and biological agents from a hazardous release are not spread uniformly. Instead, there are regions of higher concentration, in part due to local atmospheric flow conditions which can attract agents. We equipped a ground station and two rotary-wing unmanned aircraft systems (UASs) with ultrasonic anemometers. Flights reported here were conducted 10 to 15 m above ground level (AGL) at the Leach Airfield in the San Luis Valley, Colorado as part of the Lower Atmospheric Process Studies at Elevation—a Remotely-Piloted Aircraft Team Experiment (LAPSE-RATE) campaign in 2018. The ultrasonic anemometers were used to collect simultaneous measurements of …

A Fuzzy Based Model For Standardized Sustainability Assessment Of Photovoltaic Cells, Muath Bani Salim, Dervis Emre Demirocak, Nael Barakat

Mechanical Engineering Faculty Publications and Presentations

In this paper, a new environmental sustainability indicator (ESI) is proposed to evaluate photovoltaic (PV) cells utilizing Life Cycle Analysis (LCA) principles. The proposed indicator is based on a model that employs a fuzzy logic algorithm to combine multiple factors, usually used in multiple LCAs, and produce results allowing a comprehensive interpretation of LCA phase sub-results leading to standardized comparisons of various PV cells. Such comparisons would be essential for policymakers and PV cell manufacturers and users, as they allow for fair assessment of the environmental sustainability of a particular type of PV with multiple factors. The output of the …

A Novel Splitting Beam Laser Extensometer Technique For Kolsky Tension Bar Systems, Colin Loeffler

Mechanical Engineering Research Theses and Dissertations

The Kolsky (Split Hopkinson) Bar has become a well-known and established experimental technique for characterizing the mechanical behavior of materials subjected to dynamic loading conditions. Kolsky bar based experimental techniques facilitate the application of controlled and repeatable dynamic loading conditions to a specimen as well as the high resolution measurement of the resulting mechanical response. In recent decades the technique has been refined and adapted to provide more complex dynamic stress-states beyond uniaxial compression. However, the increasing complexity of the experimental apparatus introduces uncertainty to the traditional specimen deformation measurement techniques.

In this thesis, a direct non-contact optical measurement technique …

Non-Classical Plate Models Incorporating Microstructure And Surface Energy Effects: Their Variational Formulations And Applications, Gongye Zhang

Mechanical Engineering Research Theses and Dissertations

In this dissertation research, new non-classical models for Kirchhoff and Mindlin plates are developed and applied to study band gaps for flexural wave propagation in composite plate structures.

In Chapter 2, a new non-classical model for a Kirchhoff plate resting on an elastic foundation is developed using a modified couple stress theory, a surface elasticity theory and a two-parameter elastic foundation model. A variational formulation based on Hamilton’s principle is employed, which leads to the simultaneous determination of the equations of motion and the complete boundary conditions and provides a unified treatment of the microstructure, surface energy and foundation effects. …

Optical Micro-Seismometer Based On Evanescent Field Perturbation Of Whispering Gallery Modes, Jaime Da Silva

Mechanical Engineering Research Theses and Dissertations

This thesis proposes a light-weight, compact, and accurate optical micro-seismometer that could be used in many applications, such as planetary exploration. The sensor proposed here is based on the principle of whispering gallery optical mode (WGM) resonance shifts of a dielectric micro-resonator due to disturbances of its evanescent field. The micro-seismometer could be used in place of the traditional bulky seismometers. The design of a waveguide-resonator and mechanical structure to disturb the evanescent field are presented. A proof-of-concept a seismometer model that uses a 5µm ring resonator is numerically tested with actual seismic data. The results show that a WGM-based …

Optimal Placement Of Distributed Energy Storage Systems In Distribution Networks Using Artificial Bee Colony Algorithm, Choton K. Das, Octavian Bass, Ganesh Kothapalli, Thair S. Mahmoud, Daryoush Habibi

Research outputs 2014 to 2021

The deployment of utility-scale energy storage systems (ESSs) can be a significant avenue for improving the performance of distribution networks. An optimally placed ESS can reduce power losses and line loading, mitigate peak network demand, improve voltage profile, and in some cases contribute to the network fault level diagnosis. This paper proposes a strategy for optimal placement of distributed ESSs in distribution networks to minimize voltage deviation, line loading, and power losses. The optimal placement of distributed ESSs is investigated in a medium voltage IEEE-33 bus distribution system, which is influenced by a high penetration of renewable (solar and wind) …

Biodegradable And Biocompatible Silk Fibroin For Optical Applications, Corey Bryce Malinowski

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study presents nanopatterned silk fibroin films that were fabricated using soft lithography and nanoimprinting to replicate patterns from diffraction gratings. These film’s optics were analyzed based on their light scattering potential as well as their transmittance and transmission haze using a laser light, spectrometer, and UV-Vis spectrophotometer, respectively. The patterned fibroin films all displayed similar light scattering patterns to their master patterns with some transmission haze. When using the spectrometer to measure samples, those made without any nanostructure displayed transmission of 90% and over, while those with patterns depended on the structure used. The denser a structure, like the …

Cfd Modeling Of Smoke Movement In An Atrium, Robin Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this paper is to better understand the behavior of smoke movement in an atrium. Thus gives first responders and civilians in and out of building a better understanding

With the advancements of modern technology, computers and softwares make simulation models possible such as fire models to simulate fire and smoke movements. In this paper, a computational fluid dynamic (CFD) software Fire Dynamic Simulator (FDS) is used to conduct a series of atrium tests to investigate the effectiveness of smoke exhaust systems. FDS solves the Navier-Stokes equations appropriate for low speed flows (Ma < 0.3) with an emphasis on smoke, heat transport and CO2 concentrations from fires. The default turbulence model used in FDS simulation is the Large Eddy Simulation (LES), which is the solution of Navier-Stokes equations at low speed.

The compartment tested was 9 …

Fluid Structure Interaction Study Of The Obstructive Sleep Apnea And Surgical Treatment Using Suture-Patch Device On The Patient’S Tongue, Yang Liu

UNLV Theses, Dissertations, Professional Papers, and Capstones

Up to 14% of the U.S. population is estimated to have obstructive sleep apnea (OSA) related to obesity, and there is increased incidence occurring worldwide. While treatment with continuous positive airway pressure (CPAP) resolves airway obstruction, patient compliance is relatively low. Alternative interventions are available to treat OSA patients; however, their outcomes have had variable results. For example, current technologies have demonstrated an inability to define and treat the specific anatomical site(s) causing the obstruction, resulting in suboptimal modifications of the airway and poor control of OSA.

In the current study, a three-dimensional (3-D) fluid-structure interaction (FSI) numerical simulation has …

Stability Of A Spinning Triangle Tethered Spacecraft System In A Circular Orbit, Matthew James Heitstuman

Mechanical Engineering ETDs

Equations of motion are derived for a spinning triangle tethered spacecraft system and are used to analyze the stability of such systems. Floquet theory is applied to the linearized, periodic coefficient, equations of motion to analyze spin stability as a function of triangle geometry and the average spin rate of the satellite relative to the angular velocity of the spacecraft orbiting around a central body. The results of the Floquet analysis show that spin stability is achievable for many combinations of spacecraft geometry and spin rate. Spacecraft engineers or operators for a triangle-shaped tethered spacecraft can use this information for …

Design And Preliminary Evaluation Of A Supercritical Carbon Dioxide Brayton Cycle For Solar Dish Concentrator Clean Energy Production, Danielle Nobles-Lookingbill

UNLV Theses, Dissertations, Professional Papers, and Capstones

As we move toward energy independence and more ambitious clean energy goals, solar energy research must push the efficiency limits of traditional energy generation systems. Increases in efficiency can be achieved by increasing the hot temperature of the power cycle. Recent research demonstrates the potential for increased efficiency and a vastly smaller component size when supercritical carbon dioxide Brayton power cycles are used. Concentrated solar and nuclear heat sources are capable of achieving the high working fluid temperatures needed for significant efficiency gains. This NSF EPSCoR funded, experimental research system is designed to exploit the uniquely immense solar irradiance of …

Elevated Temperature Progressive Damage And Failure Of Duplex Stainless Steel, Darren P. Luke

Civil Engineering ETDs

Ductile failure of metals has been the focus of research efforts within academia and industry for many years since it is tremendously important for understanding the failure of structures under extreme loading conditions. However, limited research has been dedicated to elevated temperature ductile failure, which is critical for evaluating catastrophic events such as industrial, structural or shipping vessel fires. A detailed investigation was conducted on the structural response of Duplex Stainless Steel at elevated temperatures. The temperature dependence of elastic modulus, yield strength, ultimate strength, and ductility was measured up to 1000°C and a continuum damage plasticity model was developed. …

Integration Of A Commercial Smart Thermostat To The Aggregated Load Control Simulation Framework, Jee Won Choi

Mechanical Engineering ETDs

As part of an effort to achieve a better balance between the power demand and supply, load (demand) control simulation framework is previously developed. In the framework, HVAC load is used as a control resource, driven by the thermostat logic modeled within the framework. However, it has not been proved, whether a com- mercial thermostat is able to perform modeled thermostat’s features. Therefore, it is desired to integrate a commercial thermostat to the framework, to verify its capabil- ity of participating and performing the Demand Response (DR) scheme developed. A ‘Nest Learning Thermostat’ is selected as a commercial thermostat. Nest …

Electroactive Artificial Muscles Based On Functionally Antagonistic Core–Shell Polymer Electrolyte Derived From Ps-B-Pss Block Copolymer, Van Hiep Nguyen, Jaehwan Kim, Rassoul Tabassian, Moumita Kotal, Kiwoo Jun, Jung-Hwan Oh, Ji-Myeong Son, Muhammad Taha Manzoor, Kwang Jin Kim, Il-Kwon Oh

Mechanical Engineering Faculty Research

Electroactive ionic soft actuators, a type of artificial muscles containing a polymer electrolyte membrane sandwiched between two electrodes, have been intensively investigated owing to their potential applications to bioinspired soft robotics, wearable electronics, and active biomedical devices. However, the design and synthesis of an efficient polymer electrolyte suitable for ion migration have been major challenges in developing high-performance ionic soft actuators. Herein, a highly bendable ionic soft actuator based on an unprecedented block copolymer is reported, i.e., polystyrene-b-poly(1-ethyl-3-methylimidazolium-4-styrenesulfonate) (PS-b-PSS-EMIm), with a functionally antagonistic core–shell architecture that is specifically designed as an ionic exchangeable polymer electrolyte. The corresponding actuator shows exceptionally …

First Observation Of P-Odd Gamma Asymmetry In Polarized Neutron Capture On Hydrogen, D. Blyth, J. Fry, N. Fomin, R. Alarcon, L. Alonzi, E. Askanazi, S. Baeßler, S. Balascuta, L. Barrón-Palos, Alex Barzilov, J. D. Bowman, N. Birge, J. R. Calarco, T. E. Chupp, V. Cianciolo, C. E. Coppola, C. B. Crawford, K. Craycraft, D. Evans, C. Fieseler, E. Frlež, I. Garishvili, M. T. W. Gericke, R. C. Gillis, K. B. Grammer, G. L. Greene, J. Hall, J. Hamblen, C. Hayes, E. B. Iverson, M. L. Kabir

Mechanical Engineering Faculty Research

We report the first observation of the parity-violating gamma-ray asymmetry A(gamma)(np) in neutron-proton capture using polarized cold neutrons incident on a liquid parahydrogen target at the Spallation Neutron Source at Oak Ridge National Laboratory. A(gamma)(np) isolates the Delta I = 1, S-3(1)-> P-3(1) component of the weak nucleon-nucleon interaction, which is dominated by pion exchange and can be directly related to a single coupling constant in either the DDH meson exchange model or pionless effective field theory… See full text for full abstract.

Assessment Of Cooling And Heat Transfer Properties Of Quenchants With Matlab, Lemmy Meekisho, Rosa L. Simencio Otero, Jônatas M. Viscaino, D. Scott Mackenzie, George Totten, Lauralice C.F. Canale

Mechanical and Materials Engineering Faculty Publications and Presentations

There is ongoing interest for evaluating the potential of renewable base stocks, such as vegetable oils, to replace petroleum oils as metal quenchants. Perhaps the most critical part of this process is characterizing and comparing the cooling and heat transfer performance of potential quenchant candidates. In this work, cooling curves of two vegetable oils, palm oil and canola oil, were obtained along with a commercially available conventional and an accelerated petroleum quenchant using the so-called Tensi multiple thermocouple probe, with emphasis on the center probe emulating a small probe concept. The lumped-parameter approach was implemented in the MATLAB environment (Mathworks …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Governor Breaks Ground on New Engineering and Research Building