Mechanical Engineering Commons^™

Analysis Of Natural Convection Flow In A Detector Using Computational Fluid Dynamics, Weston Christensen

Electronic Theses and Dissertations

The goal of this research was to simulate the flow, temperature, and impurity concentration within the Deep Underground Neutrino Experiment (DUNE) Single Phase Far Detector using a commercially available computational fluid dynamics (CFD) solver. DUNE is a research collaborative investigating properties of neutrinos in an effort to better understand the origins of matter and behavior of subatomic particles. The Far Detector is a geometrically complex neutrino detector containing: anode plane arrays and cathode plane arrays which induce an electric field within the detection region that causes electrons to drift to the sensing equipment, field cage planes to enclose the neutrino …

3d Printed Bioreactor With Optimized Stimulations For Ex-Vivo Bone Tissue Culture, Anirban Chakraborty

Electronic Theses and Dissertations

Motivation: Long term tissue survivability ex-vivo can greatly facilitate research on the influence of external stimulus (loading, radiation, microgravity) on the tissue, including mechanisms of disease transmission and subsequent drug discoveries. Bioreactors (used to culture living tissue ex-vivo) can be a valuable tool to study cell activity during physiological processes by mimicking their in-vivo native 3D environment.
Objective Statement: We have developed a compact, 3D printed bioreactor equipped with both continuous flow-perfusion and dynamic mechanical-loading stimulations, capable of maintaining ex-vivo viability of swine cancellous bone cores over a long period. Qualitative study of the cultured cores (in terms of …

Time-Dependent Reliability Methodologies With Saddlepoint Approximation, Zhangli Hu

Doctoral Dissertations

"Engineers always encounter time-dependent uncertainties that ubiquitously exist, such as the random deterioration of material properties and time-variant loads. Therefore the reliability of engineering systems becomes time-dependent. It is crucial to predict the time-dependent reliability in the design stage, given possible catastrophic consequences of a failure. Although extensive research has been conducted on reliability analysis, estimating the reliability accurately and efficiently is still challenging. The objective of this work is to develop accurate and efficient reliability methodologies for engineering design. The basic idea is the integration of traditional reliability methods with saddlepoint approximation (SPA), which can accurately approximate the tail …

Volumetric Error Compensation For Industrial Robots And Machine Tools, Le Ma

Doctoral Dissertations

“A more efficient and increasingly popular volumetric error compensation method for machine tools is to compute compensation tables in axis space with tool tip volumetric measurements. However, machine tools have high-order geometric errors and some workspace is not reachable by measurement devices, the compensation method suffers a curve-fitting challenge, overfitting measurements in measured space and losing accuracy around and out of the measured space. Paper I presents a novel method that aims to uniformly interpolate and extrapolate the compensation tables throughout the entire workspace. By using a uniform constraint to bound the tool tip error slopes, an optimal model with …

Performance Evaluation Of Bmi Resin System For Thin-Ply Composites, Manoj Kumar Reddy Rangapuram

Masters Theses

"Composites materials are increasingly being used in aerospace applications over the past few years. The unique properties like high strength to weight ratio, thermal stability, fatigue and corrosion resistance set them apart from the conventional materials. Composite materials are well suited for the applications where weight is the primary concern in the design. Composites structures are vulnerable to mechanical as well as thermal loadings. Transverse micro-cracking and delamination are the most common type of failures in composite materials. The thickness of the ply being used play a key role dictating the properties of the resultant composite structure. As the ply …

Aerosol-Jet Printing And Flash Sintering Of Conformal Conductors On Non-Planar Surfaces, I-Meng Chen

Masters Theses

”The printed electronics have been broadly applied in our daily lives, many new manufacturing methodologies are studied and investigated. The research here presented the full manufacturing process of printed conductors of aerosol printing and flash sintering techniques on substrates such as planar and non-planar surfaces.

The aerosol printing (AJP) was introduced because of its simplicity in experimental setup and flexibility of printing. It produces less ink waste and consumes less manufacturing cost. Furthermore, it has the direct-write ability to print in any customized patterns or shapes on non-planar surfaces. In this study, the Cu NPs was selected as the functioning …

Controlled Switching In Kalman Filtering And Iterative Learning Controls, He Li

Masters Theses

“Switching is not an uncommon phenomenon in practical systems and processes, for examples, power switches opening and closing, transmissions lifting from low gear to high gear, and air planes crossing different layers in air. Switching can be a disaster to a system since frequent switching between two asymptotically stable subsystems may result in unstable dynamics. On the contrary, switching can be a benefit to a system since controlled switching is sometimes imposed by the designers to achieve desired performance. This encourages the study of system dynamics and performance when undesired switching occurs or controlled switching is imposed. In this research, …

Evaluation Of A Marketing Strategy Based On The Concept Of Virtual Energy Audit, Goutham Kumar Reddy Challa

Graduate Theses, Dissertations, and Problem Reports (ETD)

With the growing world population and efforts to bring better energy access to the people, energy needs of the world are expected to grow in the coming years. Given the limited availability of non-renewable resources, there has been a mounting consensus among the users and the stakeholders to utilize the available energy in the most efficient way by implementing various methods like use of advanced technologies, source reduction, behavioral changes, etc. Energy efficiency in general is considered as a win-win scenario for all the users and/or stakeholders involved as it not only lowers the base load for power generating companies, …

Modeling And Development Of The Dynamic Environmental Simulation Chamber (Desc) For Calibration Of Air Quality Monitoring Sensors, Filiz Kazan

Graduate Theses, Dissertations, and Problem Reports (ETD)

The thesis describes the development steps for the dynamic environmental simulation chamber (DESC) and carbon dioxide sensor calibration by using DESC. The sensors are Figaro, COZIR and K30 CO2 sensors

Direct Laser Metal Deposition Of Nickel Based Superalloys, Abhishek Ramakrishnan-Sudha

Wayne State University Dissertations

Nickel-based superalloys are substantially used in the manufacturing of boilers for ultra-supercritical power plants and gas turbine hot-section as this grade of alloys provide higher yield strength with the rise in operating temperature and pressure owing to the presence of γʹ second phase precipitates. Conventionally, casting techniques such as centrifugal casting, investment casting, vacuum molding and several other casting based methods are used to fabricate the hot-section components. Nevertheless, a need for designing advanced materials with complex designs such as geometry, microstructure control, compositional changes, microstructure and property varying with the location as in functionally graded materials is not viable …

Hydroxylammonium Nitrate Species In A Monopropellant Electrospray Plume, Mitchell J. Wainwright, Joshua L. Rovey, Shawn W. Miller, Benjamin D. Prince, Steven P. Berg

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A mixture of 1-ethyl-3-methylimidazolium ethyl sulfate ([Emim][EtSO4]) and hydroxylammonium nitrate (HAN) is an energetic monopropellant potentially suitable in a multi-mode chemical-electric microtube-electrospray micro propulsion system. In this work, electrospray plume mass spectra are compared between the monopropellant mixture and neat [Emim][EtSO4]. This comparison clearly indicates new and additional species present in the plume due to the addition of HAN. Mass spectra from 20-600 amu/q were obtained over a variety of angles and flow rates from 2 pL/sec to 3 nL/sec in both cation and anion extraction modes. Mass spectrum dependence on flow rate and angular orientation agree qualitatively well with …

Enhanced Quantum Dots Spontaneous Emission With Metamaterial Perfect Absorbers, Wei Wang, Xiaodong Yang, Ting S. Luk, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Metamaterial perfect absorbers (PAs) made of a hexagonal array of holes on Ag-SiO 2 -Ag thin films have been realized and utilized to enhance the spontaneous emission rate and photoluminescence intensity of CdSe/ZnS quantum dots (QDs) spin-coated on the absorber top surface. Perfect absorption of incoming light occurs at the wavelength where the impedance is matched to that of the free space. When QDs strongly excite both the electric and magnetic resonances at this perfect absorption wavelength, a significant Purcell effect on the spontaneous emission process and enhanced radiative outcoupling of photoluminescence intensity are expected. For perfect absorbers with near-unity …

Fabrication Of Alcocrfeni High-Entropy Alloy Coating On An Aisi 304 Substrate Via A Cofe₂Ni Intermediate Layer, Wenyuan Cui, Sreekar Karnati, Xinchang Zhang, Elizabeth Burns, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Through laser metal deposition, attempts were made to coat AlCoCrFeNi, a high-entropy alloy (HEA), on an AISI 304 stainless steel substrate to integrate their properties. However, the direct coating of the AlCoCrFeNi HEA on the AISI 304 substrate was found to be unviable due to cracks at the interface between these two materials. The difference in compositional change was suspected to be the source of the cracks. Therefore, a new transition route was performed by coating an intermediate layer of CoFe₂Ni on the AISI 304 substrate. Investigations into the microstructure, phase composition, elemental composition and Vickers hardness were …

Impulse Measurements Of Electric Solid Propellant In An Electrothermal Ablation-Fed Pulsed Plasma Thruster, Matthew S. Glascock, Joshua L. Rovey, Kurt A. Polzin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric solid propellants are advanced solid chemical rocket propellants that can be controlled (ignited, throttled and extinguished) through the application and removal of an electric current. These propellants are also being considered for use in the ablative pulsed plasma thruster. In this paper, the performance of an electric solid propellant operating in an electrothermal ablation-fed pulsed plasma thruster was investigated using an inverted pendulum micro-Newton thrust stand. The impulse bit and specific impulse of the device using the electric solid propellant were measured for short-duration test runs of 100 pulses and longer-duration runs to end-of-life, at energy levels of 5, …

Parametric Study Of A Turbofan Engine With An Auxiliary High-Pressure Bypass, Sharanabasaweshwara A. Asundi, Syed Firasat Ali

Mechanical & Aerospace Engineering Faculty Publications

A parametric study of a novel turbofan engine with an auxiliary high-pressure bypass (AHPB) is presented. The underlying motivation for the study was to introduce and explore a configuration of a turbofan engine which could facilitate clean secondary burning of fuel at a higher temperature than conventionally realized. The study was also motivated by the developments in engineering materials for high-temperature applications and the potential utility of these developments. The parametric study is presented in two phases. Phase I presents a schematic of the turbofan engine with AHPB and the mathematics of the performance parameters at various stations. The proposed …

Experimental Investigation Of Mixtures Of 1-Ethyl-3-Methylimidazolium Ethyl Sulfate And Ethylammonium Nitrate With Electrospray Propulsion Applications, Mitchell J. Wainwright, Joshua L. Rovey, Shawn W. Miller, Benjamin D. Prince

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Physical properties, performance metrics, and mass spectra of mixtures of two ionic liquids (1-ethyl-3-methylimidazolium ethyl-sulfate aka [Emim][EtSO4] and ethyl ammonium nitrate aka EAN) are investigated from the standpoint of electrospray propulsive characteristics. Spectra suggest that as the [Emim][EtSO4] mixture fraction increases, the intensity of [Emim][EtSO4] related species in the plume also increases, while the presence of EAN decreases. Spectra also show presence of both EAN proton transfer species and species related to chemical reaction of [EtSO4] and water. Despite the volatility of EAN, it emits stably into vacuum at low flow rates when mixed with 25% [Emim][EtSO4]. Spectra also show …

Electric Solid Propellant Ablation In An Arc Discharge, Matthew S. Glascock, Joshua L. Rovey, Kurt A. Polzin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric solid propellants are advanced solid chemical rocket propellants that can be controlled (ignited, throttled, and extinguished) through the application and removal of an electric current. Electric solid propellants are also being considered for pulsed arc ablation electric thrusters, such as the pulsed plasma thruster. The focus of this work is the electrical and ablation characteristics of electric solid propellant within an arc discharge. Arc discharges of 5–20 J per pulse were created within a cylindrical cavity, and results for the electric solid propellant are compared with polytetrafluoroethylene (PTFE), which is a traditional propellant in ablative pulsed plasma thrusters. The …

Design And Implementation Of Periodic Unsteadiness Generator For Turbine Secondary Flow Studies, Nathan James Fletcher

Browse all Theses and Dissertations

A primary source of periodic unsteadiness in low-pressure turbines is the wakes shed from upstream blade rows due to the relative motion between adjacent stators and rotors. These periodic perturbations can affect boundary layer transition, secondary flow, and loss generation. In particular, for high-lift front-loaded blades, the secondary flowfield is characterized by strong three-dimensional vortical structures. It is important to understand how these flow features respond to periodic disturbances. A novel approach was taken to generate periodic unsteadiness which captures some of the physics of turbomachinery wakes. Using stationary pneumatic devices, pulsed jets were used to generate disturbances characterized by …

Impact Of Temperature And Screw Speed On Material Meso-Structure And Tensile Strength In Large Area Pellet-Fed Additive Manufacturing, Xavier Jimenez Guzman

Open Access Theses & Dissertations

Evolution in additive manufacturing, specifically in material extrusion, has resulted in large-scale machines capable of extruding thermoplastic-matrix composite materials in higher volumes to fabricate products for large-scale applications. As with small- and medium-scale material extrusion, the properties of the final product often correlate directly with the bevy of print parameters employed. The current research was performed to evaluate the effects of the screw speed and temperature on an ABS 20%wt. carbon fiber thermoplastic processed on a Big Area Additive Manufacturing (BAAM, Cincinnati Inc) machine. Five screw speeds (50, 150, 250, 350 and 400 rpm) and three extruder temperature profiles were …

Small Satellite Development At Utep, Emily Herzog

Open Access Theses & Dissertations

The small satellite industry has seen tremendous growth in recent years. A CubeSat is a particular type of standardized small satellite that follows the CubeSat specifications. These specifications define the structural, testing, and operational requirements of the satellite. This standard facilitates cheaper design, integration, and launch of satellites, allowing smaller organizations to participate in the normally costly area of space exploration.

The University of Texas at El Paso has recognized the opportunity and has begun developing several CubeSats. The two that are the topic of this Thesis are called Orbital Factory II (OFII) and Orbital Factory X (OFX). An on-orbit …

Atomistic Simulations Of Nanoindentation Response Of Irradiation Defects In Iron, M. Mustafa Azeem, Qingyu Wang, Muhammad Zubair

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Radiation response of a material is a consequence of defects' evolution in any radiation damage event. The radiation-induced defects can significantly alter the mechanical properties of a material. Radiation damage initiates from incident neutron by bombardment on solid material causing production and evolution of Frenkel defects. Since voids are formed due to aggregation of a large number of vacancies that cause dimensional changes and hence irradiation-induced swelling. In order to characterize the effect of irradiation defects, we have performed molecular dynamics (MD) simulations to investigate nanoindentation response of point defects and voids in Fe and their effects on mechanical parameters. …

Nebraska Summary: S1179 Fendt 936, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1178 Fendt 933, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1177 Fendt 930, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1181 Fendt 942, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1157 John Deere 5125ml, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1160 John Deere 6195m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2214: Kubota M7-132, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2211: John Deere 5125ml, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2210: John Deere 5090e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …