Mechanical Engineering Commons^™

Influence Of Metal Additives On Microstructure And Properties Of Amorphous Metal–Sioc Composites, Kaisheng Ming, Qing Su, Chao Gu, Dongyue Xie, Yongqiang Wang, Michael Nastasi, Jian Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Strong, ductile, and irradiation-tolerant structural materials are in urgent demand for improving the safety and efficiency of advanced nuclear reactors. Amorphous ceramics could be promising candidates for high irradiation tolerance due to thermal stability and lack of crystal defects. However, they are very brittle due to plastic flow instability. Here, we realized enhanced plasticity of amorphous ceramics through compositional and microstructural engineering. Two metal–amorphous ceramic composites, Fe-SiOC and Cu-SiOC, were fabricated by magnetron sputtering. Iron atoms are preferred to form uniformly distributed nano-sized Fe-rich amorphous clusters, while copper atoms grow non-uniformly distributed nano-crystalline Cu particles. The Fe-SiOC composite exhibits high …

Cavitation Number As A Function Of Disk Cavitator Radius: A Numerical Analysis Of Natural Supercavitation, Reid Prichard

Senior Honors Theses

Due to the greater viscosity and density of water compared to air, the maximum speed of underwater travel is severely limited compared to other methods of transportation. However, a technology called supercavitation – which uses a disk-shaped cavitator to envelop a vehicle in a bubble of steam – promises to greatly decrease skin friction drag. While a large cavitator enables the occurrence of supercavitation at low velocities, it adds substantial unnecessary drag at higher speeds. Based on CFD results, a relationship between cavitator diameter and cavitation number is developed, and it is substituted into an existing equation relating drag coefficient …

The Design Of An Innovative Automotive Suspension For Formula Sae Racing Applications, Jared Darius

Senior Honors Theses

This thesis details an analytical approach to an innovative suspension system design for implementation to the Formula SAE collegiate competition. It focuses specifically on design relating to geometry, mathematical modeling, energy element relationships, and computer analysis and simulation to visualize system behavior. The bond graph approach is utilized for a quarter car model to facilitate understanding of the analytical process, then applied to a comparative analysis between two transverse half car models. The second half car model contains an additional transverse linkage with a third damper, and is compared against the baseline of the first half car model without the …

Mass Accommodation At A High-Velocity Water Liquid-Vapor Interface, J. Nie, A. Chandra, Z. Liang, P. Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We Use Molecular Dynamics to Determine the Mass Accommodation Coefficient (MAC) of Water Vapor Molecules Colliding with a Rapidly Moving Liquid-Vapor Interface. This Interface Mimics Those Present in Collapsing Vapor Bubbles that Are Characterized by Large Interfacial Velocities. We Find that at Room Temperature, the MAC is Generally Close to Unity, and Even with Interfaces Moving at 10 Km/s Velocity, It Has a Large Value of 0.79. using a Simplified Atomistic Fluid Model, We Explore the Consequences of Vapor Molecule Interfacial Collision Rules on Pressure, Temperature, and Density of a Vapor Subjected to an Incoming High-Velocity Liquid-Vapor Interface.

Increasing Operator Skills In A Manufacturing Environment, Bobbie Lee Hubbard

Instructional Design Capstones Collection

A plastic-injection molding facility is converting many machines into more automated systems. These complex systems require higher-level skill sets than current operators have been trained in. There is a need to increase the level of competency in most, if not all, of the operators at the Facility, and create a system of levels that engages employees and encourages learning new skills to increase their position and pay.

There is a need for a clear path of compensation based on skills and actions. The Facility is currently not optimizing or maximizing their current portfolio of machines and resources, leaving an unknown …

Less-Than-Lethal Self Defense Device With An Acoustic Element, Anthony Taibi

KSU Journey Honors College Capstones and Theses

This creative capstone project involves the conception, design, and creation of a less-than-lethal self defense device with an integrated sound board to control the acoustic element. Theoretically, this device is capable of deterring potential threats without causing any serious harm or any long-term damage. When starting this project, I was very focused on sonic warfare, and how to harness the power of ultrasonic and infrasonic sound waves to subdue to target; however, I concluded that using resonant frequencies to deter a human being is too dangerous, expensive, and can have negative effects for the user of the device if used …

Concrete Crack Detection And Monitoring Using A Capacitive Dense Sensor Array, Jin Yan, Austin Downey, Alessandro Cancelli, Simon Laflamme, An Chen, Jian Li, Filippo Ubertini

Faculty Publications

Cracks in concrete structures can be indicators of important damage and may significantly affect durability. Their timely identification can be used to ensure structural safety and guide on-time maintenance operations. Structural health monitoring solutions, such as strain gauges and fiber optics systems, have been proposed for the automatic monitoring of such cracks. However, these solutions become economically difficult to deploy when the surface under investigation is very large. This paper proposes to leverage a novel sensing skin for monitoring cracks in concrete structures. This sensing skin is constituted of a flexible electronic termed soft elastomeric capacitor, which detects a change …

A High Magnification Uv Lens For High Temperature Optical Strain Measurements, Robert S. Hansen, Trevor J. Bird, Ren Voie, Katharine Z. Burn, Ryan B. Berke

Mechanical and Aerospace Engineering Faculty Publications

Digital Image Correlation (DIC) measures full-field strains by tracking displacements of a specimen using images taken before and after deformation. At high temperatures, materials emit light in the form of blackbody radiation, which can interfere with DIC images. To screen out that light, DIC has been recently adapted by using ultraviolet (UV) range cameras, lenses, and filters. Before now, UV-DIC had been demonstrated at the centimeter scale using commercially available UV lenses and filters. Commercial high-magnification lenses using visible light have also been used for DIC. However, there is currently no commercially available high-magnification lens that will allow images to …

Method And Apparatus For Fabricating Ceramic And Metal Components Via Additive Manufacturing With Uniform Layered Radiation Drying, Ming-Chuan Leu, Amir Ghazanfari, Wenbin Li, Greg Hilmas, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A freeform extrusion fabrication process for producing three - dimensional ceramic, metal and functionally gradient composite objects, including the steps of filling a plurality of paste sources with a respective plurality of aqueous paste compositions, operationally connecting respective syringes containing respective aqueous paste compositions to a mix ing chamber, moving a first aqueous paste composition from a first respective paste source into the mixing chamber, moving a second aqueous paste composition from a second respective paste source into the mixing chamber, mixing the first and second aqueous paste compositions to define a first admixture having a first admixture composition, extruding …

An Innovative Energy Harvesting Shock Absorber System Using Cable Transmission, José Luis Olazagoitia, Lincoln Bowen, Jordi Viñolas, Javier Echávarri Otero

Artículos científicos

This paper presents an innovative design of an energy harvesting shock absorber using cable transmission called Cable-Dynamics Energy Harvesting Shock Absorber (CD-EHSA). It includes the design, modelling, bench experiments, and road tests results. Experimental tests are carried out with the CD-EHSA system in a MTS 835 machine, in order to analyze its behavior and validate the computational model of the CD-EHSA with the tests carried out on the actual component. Likewise, the paper presents the results of recovered electric power by the system during road tests at a speed between 20-30 Km/h. With four CD-EHSA installed in a Renault Twizy, …

3d Printing Robotic Arm On Linear Rails, Thomas T. Steele

Honors Theses

Typical 3D printers are bound by the printing bed volume relative to the printer frame volume. A 3D printing robotic arm set upon sliding linear rails was designed and built. The arm was 3D printed with a traditional 3D printer designed using Autodesk Inventor. This product reduces printer size while increasing bed area and reduces cost with use of 3D printed parts.

The Influence Of Complex Thermal Treatment On Mechanical Properties Of Amorphous Materials, Nikolai V. Priezjev, Qing-Long Liu

Mechanical and Materials Engineering Faculty Publications

We study the effect of periodic, spatially uniform temperature variation on mechanical properties and structural relaxation of amorphous alloys using molecular dynamics simulations. The disordered material is modeled via a non-additive binary mixture, which is annealed from the liquid to the glassy state with various cooling rates and then either aged at constant temperature or subjected to thermal treatment. We found that in comparison to aged samples, thermal cycling with respect to a reference temperature of approximately half the glass transition temperature leads to more relaxed states with lower levels of potential energy. The largest energy decrease was observed for …

A Transient Thermal And Structural Analysis Of Fuel In The Annular Core Research Reactor, Elliott Pelfrey

Mechanical Engineering ETDs

The health of a nuclear reactor’s fuel is essential to the operational longevity of the reactor. The health of the fuel in the Annular Core Research Reactor (ACRR) is a topic of increased interest due to both a proposed new facility that would include the ACRR and the recent resurfacing of contradictory reports regarding thermal stresses in its fuel pellets. Unlike other reactor fuels, which are widely used and well-characterized, the fuel in the ACRR is unique. The ACRR’s fuel elements consist of UO­₂-BeO fuel pellets, fluted niobium refractory liners, and stainless-steel cladding. The purpose of this thesis …

Water Walking As A New Mode Of Free Surface Skipping, Randy Craig Hurd, Jesse Belden, Allan F. Bower, Sean Holekamp, Michael A. Jandron, Tadd T. Truscott

Mechanical and Aerospace Engineering Faculty Publications

Deformable elastomeric spheres are evaluated experimentally as they skip multiple times over a lake surface. Some spheres are embedded with small inertial measurement units to measure the acceleration experienced during water surface impact. A model for multiple impact events shows good agreement between measured acceleration, number of skipping events and distanced traveled. The experiment reveals a new mode of skipping, “water walking”, which is observed for relatively soft spheres impacting at low impact angles. The mode occurs when the sphere gains significant angular velocity over the first several impacts, causing the sphere to maintain a deformed, oblong shape. The behavior …

Experimental Study Of Scour Around Monopile And Jacket-Type Offshore Wind Turbine Foundations, Hsin-Hung Chen

Journal of Marine Science and Technology–Taiwan

Wind turbines platforms and pillars on offshore wind farms are negatively affected by wave and current action. In Taiwan, the water depth of most planned wind turbine foundations is more than 15 m. At this water depth, scour around offshore wind turbine foundations is mainly subject to the ocean current, which causes damage or collapse of foundations. Therefore, this study focused on the influence of ocean current on the monopile and jacket-type foundations of offshore wind turbines. Hydraulic model experiments were conducted to investigate the maximum scour depth and range around pillars in these foundations. Under the effects of current, …

Detection And Classification Of Vibrating Objects In Sar Images, Francisco German Perez Venegas

Electrical and Computer Engineering ETDs

The vibratory response of buildings and machines contains key information that can be exploited to infer their operating conditions and to diagnose failures. Furthermore, since vibration signatures observed from the exterior surfaces of structures are intrinsically linked to the type of machinery operating inside of them, the ability to monitor vibrations remotely can enable the detection and identification of the machinery.

This dissertation focuses on developing novel techniques for the detection and M-ary classification of vibrating objects in SAR images. The work performed in this dissertation is conducted around three central claims. First, the non-linear transformation that the micro-Doppler return …

Direct Numerical Simulation Of Incompressible Spatially Developing Turbulent Mixing Layers, Juan Diego Colmenares Fernandez

Mechanical Engineering ETDs

Turbulent mixing layers are a canonical free shear flow in which two parallel fluid streams of different velocities mix at their interface. Understanding spatial development of a turbulent mixing layer is essential for various engineering applications. However, multiple factors affect physics of this flow, making it difficult to reproduce results in experiments and simulations. The current study investigates sensitivity of direct numerical simulation (DNS) of such a flow to computational parameters. In particular, effects of the computational domain dimensions, grid refinement, thickness of the splitter plate, and the laminar boundary layer characteristics at the splitter plate trailing edge are considered. …

Restore-L Satellite Servicing Internship Final Report, Giovanni Campos

Publications and Research

This paper reviews the Restore-L mission purpose and the necessary research and simulations to meet mission specification for the Propellant Transfer Subsystem (PTS). It is essential the PTS undergoes functionality testing, environmental testing, and calculations to understand the capabilities of the system. For the testing of components from PTS, a proper test setup is required. It is vital for test hardware, such as hoses and valves, to stay in place while the test is being performed. For the test hardware to operate correctly, positioning, orientation, and alignment are critical as well. In addition to the testing, calculations for pressure drop …

Vibration-Based In-Situ Detection And Quantification Of Delamination In Composite Plates, Hanfei Mei, Asaad Migot, Mohammad Faisal Haider, Roshan Joseph, Md Yeasin Bhuiyan, Victor Giurgiutiu

Faculty Publications

This paper presents a new methodology for detecting and quantifying delamination in composite plates based on the high-frequency local vibration under the excitation of piezoelectric wafer active sensors. Finite-element-method-based numerical simulations and experimental measurements were performed to quantify the size, shape, and depth of the delaminations. Two composite plates with purpose-built delaminations of different sizes and depths were analyzed. In the experiments, ultrasonic C-scan was applied to visualize the simulated delaminations. In this methodology, piezoelectric wafer active sensors were used for the high-frequency excitation with a linear sine wave chirp from 1 to 500 kHz and a scanning laser Doppler …

Mechanical And Tribological Behaviour Of Treated And Untreated Moringa Oleifera Pods Fiber Reinforced Epoxy Polymer Composite For Packaging Applications, Prakash Sampath, Senthil Kumar V.S Dr

Journal of Applied Packaging Research

Researchers now focus on the use of natural fiber polymer composites materials for packing applications. This attention is due to their low cost and renewable characteristics. Fabrication of composites with the use of renewable resources has many benefits of alternating from an appropriate management and reduction in industrial wastages, ecofriendly behaviour to cost effectiveness. The artificial fibers in packing industries can be replaced by natural fibers in the areas where stiffness and high strength are not the primary requirement. In the last decade the use of Natural fibers in the place of artificial fibers for reinforcements in epoxy resin matrix …

Development And Validation Of A Vibration-Based Sound Power Measurement Method, Cameron Bennion Jones

Theses and Dissertations

The International Organization for Standardization (ISO) provides no vibration-based sound power measurement standard that provides Precision (Grade 1) results. Current standards that provide Precision (Grade 1) results require known acoustic environments or complex setups. This thesis details the Vibration Based Radiation Mode (VBRM) method as one approach that could potentially be used to develop a Precision (Grade 1) standard. The VBRM method uses measured surface velocities of a structure and combines them with the radiation resistance matrix to calculate sound power. In this thesis the VBRM method is used to measure the sound power of a single-plate and multiple plate …

The Influence Of Process Variables On Physical And Mechanical Properties In Laser Powder Bed Fusion, Joshua Robert Koepke, Bradley Jared, Yu-Lin Shen

Mechanical Engineering ETDs

Laser powder bed fusion additive manufacturing consists of a process that incorporates many process variables into fabricating parts. This study investigated several of these process variables and determined their influence on part properties. The process variables investigated include laser power, velocity, focus offsets, layer thickness, and powder particle size. Physical properties will be compared including surface roughness, form, and density. Tensile testing provided mechanical properties including unloading Young’s modulus, ultimate tensile strength, yield strength, uniform elongation, and ductility. Process maps will be developed that will provide recommendations for these process settings. It will be shown that these laser settings can …

Physical Constraints On Accuracy And Persistence During Breast Cancer Cell Chemotaxis, Julien Varennes, Hye-Ran Moon, Soutick Saha, Andrew Mugler, Bumsoo Han

Purdue University Libraries Open Access Publishing Fund

Directed cell motion in response to an external chemical gradient occurs in many biological phenomena such as wound healing, angiogenesis, and cancer metastasis. Chemotaxis is often characterized by the accuracy, persistence, and speed of cell motion, but whether any of these quantities is physically constrained by the others is poorly understood. Using a combination of theory, simulations, and 3D chemotaxis assays on single metastatic breast cancer cells, we investigate the links among these different aspects of chemotactic performance. In particular, we observe in both experiments and simulations that the chemotactic accuracy, but not the persistence or speed, increases with the …

Biomechanical Foot Guidance Linkage, Carl Nelson, Cale J. Stolle, Judith M. Burnfield

Department of Mechanical and Materials Engineering: Faculty Publications

A gait replication apparatus can include a scalable mechanical mechanism configured to replicate different gaits . The scalable mechanical mechanism can include , for example , a four - bar linkage , a pantograph , a cam / Scotch - yoke mechanism , and so forth . In some embodiments , the mechanical mechanism includes a beam rotating about an axis passing proximate to its center , with a foot pedal slidably coupled with the beam , and a timing chain / belt or cable pulley - pair coupled with the foot pedal and looped about the beam . A …

Gaussian Process Regression Applied To Marine Energy Turbulent Source Tuning Via Metamodel Machine Learning Optimization, Sterling Olson

Mechanical Engineering ETDs

Converting energy from the currents found within tidal channels, open ocean, rivers, and canals is a promising yet untapped source of renewable energy. In order to permit current energy converters for installation in the environment, the CECs must be shown to non-negatively impact the environment. While developing these model increased utility may be gained if researchers may optimize mechanical power while constraining environmental effects. Surrogate models have garnered interest as optimization tools because they maximize the utility of expensive information by building predictive models in place of computational or experimentally expensive model runs. Marine hydrokinetic current energy converters require large-domain …

A Discrete Curvature Estimation Based Low-Distortion Adaptive Savitzky-Golay Filter For Ecg Denoising, Hui Huang, Shiyan Hu, Ye Sun

Department of Mechanical and Aerospace Engineering Publications

Electrocardiogram (ECG) sensing is an important application for the diagnosis of cardiovascular diseases. Recently, driven by the emerging technology of wearable electronics, massive wearable ECG sensors are developed, which however brings additional sources of noise contamination on ECG signals from these wearable ECG sensors. In this paper, we propose a new low-distortion adaptive Savitzky-Golay (LDASG) filtering method for ECG denoising based on discrete curvature estimation, which demonstrates better performance than the state of the art of ECG denoising. The standard Savitzky-Golay (SG) filter has a remarkable performance of data smoothing. However, it lacks adaptability to signal variations and thus often …

Enhanced Carbon Dioxide Electrolysis At Redox Manipulated Interfaces, Wenyuan Wang, Lizhen Gan, John P. Lemmon, Fanglin Chen, John T. S. Irvine, Kui Xie

Faculty Publications

Utilization of carbon dioxide from industrial waste streams offers significant reductions in global carbon dioxide emissions. Solid oxide electrolysis is a highly efficient, high temperature approach that reduces polarization losses and best utilizes process heat; however, the technology is relatively unrefined for currently carbon dioxide electrolysis. In most electrochemical systems, the interface between active components are usually of great importance in determining the performance and lifetime of any energy materials application. Here we report a generic approach of interface engineering to achieve active interfaces at nanoscale by a synergistic control of materials functions and interface architectures. We show that the …

Synthesis And Characterization Of Molybdenum Disulfide/Conducting Polymer Nanocomposite Materials For Supercapacitor Applications, Turki S. Alamro

USF Tampa Graduate Theses and Dissertations

The needs for energy storage devices have kindled researchers desire to explore and synthesize nanocomposite materials. Storing energy efficiently, effectively and sustainably are the science and engineering communities’ highest priorities to develop electrochemical energy storage devices. Supercapacitors have become power solution not only because supercapacitors can bridge the gap between the traditional capacitors and rechargeable batteries but also because of many other advantages which include extraordinary electrochemical properties, wide working-temperature range, cost effective, safe operation and long/stable cycle life. They have higher current pules than batteries due to the mechanism of charging and discharging. Batteries charging and discharging via chemical …

Construction Of High-Performance 3d Nanostructured Flower-Like Iron-Nickel Sulfide For Supercapacitor, Chen Zhao, Sanket Bhoyate, Chunyang Zhang, Ram K. Gupta, Pawan K. Kahol

Posters

The global energy crisis and environmental pollution have stimulated increasing attention to developing clean and renewable alternative energy sources. One of the most efficient and greenest energy storage devices is supercapacitor which could store energy via electrical double layer and redox reactions. Supercapacitors are widely employed for many portable electronics and hybrid electric vehicles due to their high-power density, fast charge-discharge rate, and good cycle stability. In this work, 3D nanostructured flower-like iron-nickel sulfide was synthesized on the nickel foam using a facile hydrothermal method. The iron-nickel sulfide electrode showed out­standing performance for supercapacitor with a high areal capacitance of …

Nanosheets Of Cuco₂O₄ As A High-Performance Electrocatalyst In Urea Oxidation, Camila Zequine, Ram K. Gupta, Pawan K. Kahol

Posters

The urea oxidation reaction (UOR) is a possible solution to solve the world’s energy crisis. Fuel cells have been used in the UOR to generate hydrogen with a lower potential compared to water splitting, decreasing the costs of energy production. Urea is abundantly present in agricultural waste and in industrial and human wastewater. Besides generating hydrogen, this reaction provides a pathway to eliminate urea, which is a hazard in the environment and to people’s health. In this study, nanosheets of CuCo₂O₄ grown on nickel foam were synthesized as an electrocatalyst for urea oxidation to generate hydrogen as a green fuel. …