Power and Energy Commons^™

Surface Structure Engineering Of Feni-Based Pre-Catalyst For Oxygen Evolution Reaction: A Mini Review, Jia-Xin Li, Li-Gang Feng

Journal of Electrochemistry

Nitrite, a widespread raw material, is harmful to human health for long-term consumption. At present, the detection methods of nitrite mainly include chemical analysis, fluorescence, ultraviolet spectrophotometry and chromatography. These methods have ideal sensitivity and selectivity, but also have some characteristics: cumbersome operation, expensive equipment and professional personnel. Therefore, the development of a simple and sensitive nitrite assay is of great significance. In this paper, the Au/rGO/FeOOH composite materials, which revealed good synergistic catalytic performance among the three elements in the composite, were prepared by simple hydrothermal method and reduction method for the first time with large specific surface area …

Identifying Opportunities And Priorities For Energy Extension, Drew F. Schiavone

Journal of Extension

An online survey was administered to all educators and specialists within the University of Maryland Extension to assess client-driven opportunities and priorities for energy-related programming, while in-service training evaluations were used to further assess programmatic needs. Results indicate the need for information related to energy conservation and clean energy technology for agricultural and residential clientele. Primary barriers were perceived as the insufficient understanding and high costs associated with clean energy, while experiential participation and firsthand observation were reported as preferred learning methods. These results provide an understanding of how energy-related programming can expand the role and relevancy of Extension.

Developing Positive Thermal Coefficient (Ptc) Heaters For Solar Electric Cooking, Katarina Ivana Brekalo, Andrew Shepherd

Physics

Positive Thermal Coefficients, PTCs, are materials that abruptly change in resistance in response to changes in temperature. The purpose of this experiment is to explore the viability of using the switching type ceramic PTC thermistor as a replacement for current resistive heaters. These types of PTCs have a nonlinear change in resistance with increases in temperature. This device will be used as a temperature-controlling heating element intended to power an Insulated Solar Electric Cooker (ISEC). The ISEC is designed to cook meals throughout the day for impacted communities as an alternative cooking method that doesn’t require biofuel as an energy …

How Will Heat Pumps Affect Electricity Load Profiles For Buildings In Ireland? Empirical Data Used To Model Possible Financial Impacts Facing Consumers, Michael Mcdonald

Conference papers

The current geopolitical situation is certainly challenging the colossal transition to Zero carbon Economy. In fact, in the coming years, the electricity sector will have to find new innovative ways to meet the ever increasing need for energy without the over reliance on fossil fuels and their country of origin. Over the next decade, oil and gas boilers will not be permitted in new buildings in Ireland, in line with the Irish Building Regulations, Technical Guidance Document L – Conservation of Fuel and Energy 2021. This is a major shift in traditional building services methodology and heat technology. …

Products Pricing And Return Strategies For The Dual Channel Retailers, Jian Liu, Xinyue Sun, Yanyan Liu

Electrical and Computer Engineering Faculty Research & Creative Works

This paper analyzed how different return strategies and return rates affect dual-channel retailers' profits and channel pricings. Return can stimulate sales; however, the return has presented significant challenges to retailers. The return has long been studied to maximize profit and pricing; however, the different return strategies for dual-channel retailers affect channel both. This paper aimed to study whether or not dual-channel retailers should allow customers to return items in two channels and whether or not the retailer should contract with the manufacturers and pay extra fees to return products. This study indicated when the retailer should allow customers' returns to …

Facile One-Step Solid-State Synthesis Of Ni-Rich Layered Oxide Cathodes For Lithium-Ion Batteries, Jing-Yue Wang, Rui Wang, Shi-Qi Wang, Li-Fan Wang, Chun Zhan

Journal of Electrochemistry

Nickel-rich layered oxide is one of the dominate cathode materials in the lithium ion batteries, due to its high specific energy density meeting the range requirement of the electric vehicles. Typically, the commercial Ni-rich layered oxides are synthesized from co-precipitated precursors, while precision control is required in the co-precipitation process to ensure the atomic level mixing of the cations such as Ni, Co and Mn, et.al. In this work, a one-step solid-state method was successfully applied to synthesize the Ni-rich layered oxide materials with ultra-high Ni content. By choosing the nickel hydroxides as the precursor with layered structure similar to …

Quantitative Lithium Composite As 3d Lithium Foam Anode For Lithium Metal Battery, Hu-Dong Li, Wei-Shang Jia, Xin-Xiu Yan, Yao-Yue Yang

Journal of Electrochemistry

Lithium (Li) metal as an anode material for batteries has extremely high specific capacity and extremely low redox potential, which can significantly improve the energy density of the battery. However, the main problems faced by the use of Li metal anodes are Li dendrite growth, interfacial side reaction and volumetric change of electrode. Herein, a strategy to prepare the three-dimensional (3D) Li foam by combining 3D scaffold with quantitative Li was proposed to suppress Li dendrites growth and alleviate electrode volumetric change. The 3D Li foam facilitated the efficient utilization of Li metal by suppressing the Li dendrite growth, mitigating …

Low-Crystallinity And Heterostructured Aupt-Ru@Cnts As Highly Efficient Multifunctional Electrocatalyst, Tuan-Jie Gan, Jian-Ping Wu, Shi Liu, Wen-Jun Ou, Ling Bin, Xiong-Wu Kang

Journal of Electrochemistry

The catalytic activity of the catalysts is strongly dependent on the structure of the catalysts, and the exploration of their correlation and structure-controlled synthesis of the high-performance catalysts are always at the central. Currently, platinum (Pt) is the optimum catalyst for hydrogen evolution reaction (HER), oxygen reduction reaction (ORR) and alcohol oxidation reaction, while ruthenium (Ru) behaves as the champion catalyst for oxygen evolution reaction (OER) during water splitting. Preparing alloy catalysts with these precious metals can modulate the catalytic activity of these catalysts from the perspective of strain effect, ensemble effect and ligand effect. Here, we developed a strategy …

Optimized Electrochemical Performance Of Si@C Prepared By Hydrothermal Reaction And Glucose Carbon Source, Si Chen, Song-Sheng Zheng, Lei-Ming Zheng, Ye-Han Zhang, Zhao-Lin Wang

Journal of Electrochemistry

Silicon (Si) has been considered as the potential material for the next-generation lithium-ion batteries (LIBs) for its high capacity (4200 mAh·g^-1, Li₂₂Si₅) and suitable working voltage (about 0.25 V vs. Li/Li⁺). However, the cycling stability and electrochemical performance of Si anode become significant challenges because of low intrinsic conductivity and huge volume variation (about 400%) during cycling processes. In addition, the repeated formation and destruction of surface solid electrolyte interphase (SEI) film will continuously consume the electrolyte and cause damage to LIBs. Carbon (C) materials, such as graphite, carbon spheres and tubes, …

Short-Term Electricity Price Point And Probabilistic Forecasts, Chenxu Zhang

Theses and Dissertations

Accurate short-term electricity price forecasts are essential to all electricity market participants. Generation companies adopt price forecasts to hedge generation shortage risks; load serving entities use price forecasts to purchase energy with low cost; and trading companies utilize price forecasts to arbitrage between markets.

Currently, researches on point forecast mainly focus on exploring periodic patterns of electricity price in time domain. However, frequency domain enables us to identify more information within price data to facilitate forecast. Besides, price spike forecast has not been fully studied in the existing works. Therefore, we propose a short-term electricity price forecast framework that analyzes …

Modeling Supercritical Fluids And Fabricating Electret Films To Address Dielectric Challenges In High-Power-Density Systems, Farhina Haque

Theses and Dissertations

Wide bandgap (WBG) devices and power electronic converters (PEC) that enable the dynamic control of energy and high-power density designs inevitably contain defects including sharp edges, triple points, and cavities, which result in local electric field enhancements. The intensified local electric stresses cause either immediate dielectric breakdown or partial discharge (PD) that erodes electrical insulators and accelerates device aging. With the goal of addressing these dielectric challenges emerging in power-dense applications, this dissertation focuses on 1) modeling the dielectric characteristics of supercritical fluids (SCFs), which is a new dielectric medium with high dielectric strength and high cooling capability; and 2) …

Advances In Power System Operation And Optimization, You Lin

Electrical Engineering Theses and Dissertations

The modern power system has witnessed an increasing penetration of distributed energy resources and modern loads with variable frequency drives. The increasing complexity brings great challenges to modern power system operations. Significant efforts have been made to develop more accurate power system operation and optimization methods. The tradeoff between computation and the model structure makes the problem nontrivial to solve and analyze. Enabled by the wide deployment of PMUs and advanced machine learning algorithms, we improve the conventional power system operation and optimization techniques by improving the accuracy of power system measurements, implementing new power system modeling structures, and performing …

Data-Driven Distributed Modeling, Operation, And Control Of Electric Power Distribution Systems, Hasala Dharmawardena

All Dissertations

The power distribution system is disorderly in design and implementation, chaotic in operation, large in scale, and complex in every way possible. Therefore, modeling, operating, and controlling the distribution system is incredibly challenging. It is required to find solutions to the multitude of challenges facing the distribution grid to transition towards a just and sustainable energy future for our society. The key to addressing distribution system challenges lies in unlocking the full potential of the distribution grid. The work in this dissertation is focused on finding methods to operate the distribution system in a reliable, cost-effective, and just manner.

In …

Hierarchical And Distributed Architecture For Large-Scale Residential Demand Response Management, Pramod Herath Mudiyanselage

All Dissertations

The implementation of smart grid brings several challenges to the power system. The ‘prosumer’ concept, proposed by the smart grid, allows small-scale ‘nano-grids’ to buy or sell electric power at their own discretion. One major problem in integrating prosumers is that they tend to follow the same pattern of generation and consumption, which is un-optimal for grid operations. One tool to optimize grid operations is demand response (DR). DR attempts to optimize by altering the power consumption patterns. DR is an integrated tool of the smart grid. FERC Order No. 2222 caters for distributed energy resources, including demand response resources, …

Hybrid Smart Transformer For Enhanced Power System Protection Against Dc With Advanced Grid Support, Moazzam Nazir

All Dissertations

The traditional grid is rapidly transforming into smart substations and grid assets incorporating advanced control equipment with enhanced functionalities and rapid self-healing features. The most important and strategic equipment in the substation is the transformer and is expected to perform a variety of functions beyond mere voltage conversion and isolation. While the concept of smart solid-state transformers (SSTs) is being widely recognized, their respective lifetime and reliability raise concerns, thus hampering the complete replacement of traditional transformers with SSTs. Under this scenario, introducing smart features in conventional transformers utilizing simple, cost-effective, and easy to install modules is a highly desired …

Evaluation Of Single Phase Smart Pv Inverter Functions In Unbalanced Residential Distribution Systems, Darren Symonette

Graduate Theses and Dissertations

In the United States, smart PV inverters integrated with residential distribution systems are becoming a more common occurrence. With integration of smart PV inverters, power utilities are experiencing an increase of number of operations with regards to switched capacitor banks, voltage regulators and on load tap changers. These increases can lead to excess wear and tear on the devices causing power utilities to perform unwanted replacement and maintenance. However, smart PV inverters when controlled under specific functions can enable these inverters to provide reactive power and voltage control which in turn lowers the number of operations for switched capacitor banks, …

Protection Of Microgrids: A Scalable And Topology Agnostic Scheme With Self-Healing Dynamic Reconfiguration, Phani Harsha Gadde

All Dissertations

Momentum towards realizing the smart grid will continue to result in high penetration of renewable fed Distributed Energy Resources (DERs) in the Electric Power System (EPS). These DERs will most likely be Inverter Based Resources(IBRs) and will be an integral part of the distribution system in the near future. The drive towards resiliency with these IBRs will enable a modular topology where several microgrids are tied together, operating synchronously to form the future EPS at the distribution level.

Since the microgrids can evolve from existing distribution feeders, they will be unbalanced in load, phases, and feeder impedances. A typical control …

Controller Platform Design And Demonstration For An Electric Aircraft Propulsion Driv, Rosten Sweeting

Graduate Theses and Dissertations

With the growth in the aerospace industry there has been a trend to optimize the performance of an aircraft by reducing fuel consumption and operational cost. Recent advancements in the field of power electronics have pushed towards the concepts of hybrid electric aircraft also known as more electrical aircrafts. In this work, a custom controller board for an electric aircraft propulsion drive was designed to drive a permanent magnet synchronous motor. Design of the controller board required knowledge of the topology selection and power module selections. Simulations of the system were performed using MATLAB/Simulink to analyze the overall performance of …

Constraint-Aware, Scalable, And Efficient Algorithms For Multi-Chip Power Module Layout Optimization, Imam Al Razi

Graduate Theses and Dissertations

Moving towards an electrified world requires ultra high-density power converters. Electric vehicles, electrified aerospace, data centers, etc. are just a few fields among wide application areas of power electronic systems, where high-density power converters are essential. As a critical part of these power converters, power semiconductor modules and their layout optimization has been identified as a crucial step in achieving the maximum performance and density for wide bandgap technologies (i.e., GaN and SiC). New packaging technologies are also introduced to produce reliable and efficient multichip power module (MCPM) designs to push the current limits. The complexity of the emerging MCPM …

Designing Harvesting And Hauling Cost Models For Energy Cane Production For Biorefineries, Prabodh Illukpitiya, Firuz Yuldashev, Kabirat Nasiru

Agricultural and Environmental Sciences Faculty Research

The harvesting and hauling operations of bioenergy feedstock is an important area in biofuel production. Production costs can be minimized by maintaining optimal machinery units for these operations. The objective of this study is to design an optimal harvesting unit for bioenergy refinery and estimate harvesting and hauling costs of energy cane. A biorefinery with the annual capacity of processing twenty-five million imp. gallons of ethanol were considered. Given the efficiency of harvesting, a two-row soldier system was considered. Considering the year-round supply of energy cane to the refinery, the optimal machinery unit was designed, and the combined operation costs …

Development Of A Configurable Real-Time Event Detection Framework For Power Systems Using Swarm Intelligence Optimization, Umar Farooq

Dissertations and Theses

Modern power systems characterized by complex topologies require accurate situational awareness to maintain an adequate level of reliability. Since they are large and spread over wide geographical areas, occurrence of failures is inevitable in power systems. Various generation and transmission disturbances give rise to a mismatch between generation and demand, which manifest as frequency events. These events can take the form of negligible frequency deviations or more severe emergencies that can precipitate cascading outages, depending on the severity of the disturbance and efficacy of remedial action schema. The impacts of such events have become more critical with recent decline in …

Adaptive Balancing Compensation In Distribution Grid Of Ultra High-Power Manufacturing Plants, Motab Almousa

LSU Doctoral Dissertations

This dissertation presents a method of adaptive compensation, capable of handling power factor and the supply quality improvement under non-sinusoidal conditions. The focus in this dissertation is put on developing compensation for ultra-high power metallurgical plants, meaning on compensation in three-phase, four-wire ultra-high power dynamic, distribution systems. A separate attention in the dissertation is put on the adaptive compensation of ultrahigh power arc furnaces. The dissertation also presents an original method of adaptive compensation of DC current generated by such arc furnaces.

The proposed compensator is developed in the frame of the Currents’ Physical Components (CPC) – based power theory. …

Modeling And Analysing The Impact Of Heat Pump Water Heaters On Distribution Systems Using Gridlab-D, Midrar Adham

Dissertations and Theses

With the constant increase in energy demand, finding ways to reduce peak load and the energy-costs factors has become more imperative. Domestic water heating showcases a significant opportunity for such applications. Water heating is the second-highest energy consumer in the residential sector across the United States. Electric Water Heaters (EWHs), in particular, constitute nearly 43% of American household water heating energy consumption. Heat Pump Water Heater (HPWH), on the other hand, is an advanced water heating technology that has recently emerged in the United States residential market.

The objectives of this work are to develop a HPWH model and build …

New Solid Polymer Electrolytes For Lithium, Sodium, And Calcium-Based Batteries, Francielli Silva Genier

Dissertations - ALL

The establishment of sustainable energy sources highly depends on efficient storage devices to guarantee a consistent power supply. The growing demand for lithium-ion batteries (LIBs) for this purpose, combined with concerns about lithium availability, has motivated the search for viable storage alternatives, such as sodium and calcium. While several studies have investigated different lithium-free liquid electrolytes, the transport of these alternative ions in their polymer counterparts remains understudied. The advantages of solid polymer electrolytes include the possibility of higher energy density in solid-state devices and the elimination of safety concerns associated with liquid electrolytes, such as flammability, leakage, and dendrite …

Renewable Energy Microgrids To Improve Electrification Rate In Democratic Republic Of Congo: Case Of Hydro, Municipal Waste And Solar, Ngondo Otshwe Josue, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, it is imperative for citizens to have access to electricity. This applies to Congolese--rural and urban dwellers, and if possible, it should be guaranteed by government’s laws and policies. Howev er, the rural and urban areas of Democratic Republic of Congo (DRC) suffer majorly from lack of access to electricity. The major reasons are the high costs associated with connection to the national central grid and production insufficiency. Therefore, one feasible approach to electrify these areas is to use microgrids. This technolo gy is decent and viable option for energy revolution since it incorpo rates energy storage systems, distributed …

Assessment Of Energy Efficiency In Beverage Industry, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

The brewery industry has a significant contribution to the national income. However, it is also associated with energy intensive processes and pollution. In this work, the energy efficiency assessment of the largest brewery in Tanzania i.e., Tanzania Breweries Limited has been conducted. Energy consumption analysis was conducted according to IEEE SA 739 1995. Important parameters used to assess brewery energy efficiency were boiler efficiency and losses, equipment energy productivity as well as load factor. It was found that the main energy consumers are packaging (54.63%), brewing (29.30%) and utilities (15.17%). More importantly, it was found that about 68% of the …

A Model For Sustainable Adoption Of Solar Photovoltaic Technology In Tanzania, Joseph Kihedu

Tanzania Journal of Engineering and Technology (TJET)

The aim of the study was to develop a sustainable model for enhancement of the solar PV technology adoption in Tanzania. The model was developed based on the identified barriers that hinder the adoption of solar PV technology and adopted the best strategies from successful projects. Further, the drivers and activities were developed based on selected best strategies from successful projects. The identified barriers to the adoption of solar PV technology, which are grouped into five associated categories and their significances, are lack of access to finance (32%), non-enforcement of policy and regulation (31%), technical (18%), lack of awareness (9%) …

An Experimental Approach Towards Pv-Based Solar System Sizing For An Engineering Laboratory, Muyideen O. Lawal

Tanzania Journal of Engineering and Technology (TJET)

This study aims at providing an experimental sizing procedure for a rooftop PV-based solar power system for an engineering laboratory. This was achieved by monitoring the peak power and energy delivered by an installed 20W solar panel into an 18 Ah battery. Knowledge of the average daily peak power and energy was used to determine the percentage rated capacity available for use and the sun hour. A load consumption comparison was also carried out with and without the connection of a load to inverter. In addition to this, the monitoring of the no-load consumption of the inverter was carried out. …

Viability Analysis Of Ubungo Ii Gas Power Plant Efficiency Improvement Using Co-Generation System, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

The power utility, Tanzania Electric Supply Company Limited (TANESCO) is faced with challenges of supplying adequate power to the ever-increasing demand. To this end, this paper explores the installed Ubungo Gas Power Plant (UGP II) located in Dar es Salaam to find means of utilizing it in co-generation method. The study embarked on detailed modelling of the system and run simulations which indicated that the co-generation can result to power generation efficiency increase between 10.42 to 50.92%. It is recommended to change the UGP II to exploit this co-generation method. Further, the study could be improved by including more parameters …

Study On Low Voltage Electrodeposition Of Diamond-Like Carbon Film, Li Wang, Min-Xian Wu, Jun Li, Yan-Li Chen, Wen-Chang Wang, Zhi-Dong Chen

Journal of Electrochemistry

Diamond-like carbon (DLC) films are receiving a lot of attention from the scientific community, thanks to the promise of DLC films for applications in microelectronics and optoelectronics. Usually, electrodeposition is the preferred common technique because of low cost, large deposition area and simplicity of the setup. However, when carbon films are electrodeposited on a stainless steel, high cell voltages (≥1000 V) are required owing to the low electric conductivity of the organic solvents. This work has developed a new electrolyte system that could achieve carbon deposition on a stainless steel under a low applied cell voltage. The DLC films were …