Power and Energy Commons^™

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Current Source Dc-Dc Converter For Undersea Fiber Optic Sensors, Richard Anthony Esplana Kwan, John Charles Rodinec, Andrew Armstrong

Electrical Engineering

Today, there are nearly 400 cable networks spanning roughly 750,000 miles to connect our world together. With thousands of miles of cable already lying on the ocean floor, with thousands more to come, many have recognized a unique opportunity in using this cable infrastructure as an attachment point for sensors to help study and monitor the ocean. Placing sensors onto a submarine cable is not a simple task; the sensors will require power that they receive from a transmission cable, from a battery, or from the submarine cable itself. Unfortunately, the existing power feed configuration for submarine cables typically only …

Battery Hardware Simulator, Kian N. Orang, Marcelo Garcia

Electrical Engineering

This project aims to develop a battery hardware simulator, which will serve as a tool for studying microgrids. The primary objective is to create a simulation system that can emulate various battery technologies that are used in microgrids, including lithium-ion and lead acid. By utilizing this battery simulator, Cal Poly students can safely test battery management systems and battery-sensitive electronics without the inherent risks associated with real batteries. Our project implemented this design with a 4-quadrant programmable power supply (ITECH) connected to an AP Systems grid tied inverter. The power supply acts as the battery which can receive or supply …

Development Of Multiple Input Single Output Dc-Dc Converter, Ryan Bailey, Miguel Carmona, Jose Velez-Lopez

Electrical Engineering

This senior project report details the testing and validation of the designed DC-DC Multiple Input Single Output converter. The MISO uses four-switch buck-boost topology to output a single 48V from multiple nominal 24V inputs. The previous iteration of the MISO was plagued with an overheating mosfet that would drastically reduce the lifespan of the boards and reduce efficiency. This newest iteration includes more ground panes to combat the issues. In addition, the 200W MISO board was redesigned to utilize an edge connector for secure installment, removal, and replacement in the actual DC House system panel. The slots also have a …

Wireless Energy Harvesting System, Matthew Palma, Audrey Toop, Andrew Fahey

Electrical Engineering

The modern world is built upon wireless transmission of data. The signals that carry this data travel through the air, an untapped source of power. Unreceived transmissions are dissipated into useless forms of energy when they should be reclaimed. Wireless electronics can theoretically be powered by harvesting energy from the electromagnetic signals in the wireless internet frequency band. The aim of this project is to develop a system to capture ambient energy, convert it into DC power, and store the power for later use. The product will consist of three subsystems: an antenna receiver, a rectifier and voltage-multiplier, and a …

Parameter Measurement Of 0.33 Hp Synchronous Machine Using Itech Digital Power Supply, Andrew Kargol

Master's Theses

The classical methodologies for synchronous machine modeling provide a solid estimation for synchronous machine behavior but are limited in terms of accuracy due to the assumptions made in the modeling process. The equivalent circuit model developed by the classical approach breaks down the entire machine into a singular impedance component. This allows the model to be generated more quickly but limits its accuracy. In the pursuit of developing a more realistic model, this thesis outlines the parameter measurement of a Hampden SM-100 synchronous machine. In determining the SM-100’s experimental parameters, this thesis executes and analyzes new experimental approaches to synchronous …

Efficiency Study Of A Hybrid Ac/Dc House, Eunice Dominique Solomon Santiago

Master's Theses

With the proliferation of residential-scale renewable energy sources and DC loads, it has become attractive to use residential DC electrical system that could offer benefits over the legacy residential AC electrical system. The Hybrid AC/DC house provides a sustainable alternative to preexisting residential electrical system by having both AC and DC buses. The DC bus facilitates the connection from DC sources to DC loads, whereas the AC bus interfaces AC sources to AC loads. The study develops the equations to calculate losses based on a model consisting of four main components: Multiple-Input Single-Output (MISO) converter, AC-DC converter, inverter, and DC-DC …

Wideband Parameter Estimation Of Overhead Transmission Lines From Terminal Measurements, Fahad J. Alqahtani

Dissertations

The accurate and efficient determination of electrical parameters of transmission lines is essential when performing computer-aided analyses of power systems, including power-flow, state estimation, short-circuit, transient stability, power quality, and electromagnetic transients.

In this dissertation, a novel technique for wideband parameter estimation of frequency-dependent single-phase, three-phase transposed, and three-phase untransposed overhead lines, is proposed. The proposed technique utilizes terminal measurements of transient voltages and currents and is based on an analytical approach to solve the frequency domain 2-port nodal model of the line for the series impedance and shunt conductance per unit length as a function of the frequency. The …

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

Probabilistic Assessment Of Power Systems Resilience Under Natural Disasters, Enas M. Hegazy, Abdelfattah A. Eladl, Magdi M. El-Saadawi

Mansoura Engineering Journal

Extreme weather can have a substantial influence on a power system's operational resilience since they are high-impact, low-probability (HILP) events. Therefore, Power systems must be resilient to HILP incidents in addition to being reliable against widely spread and credible threats. Despite the rarity of such events, the severity of their potential impact necessitates the development of appropriate resilience assessment tools to capture their implications and enhance the resilience of energy infrastructure systems. In this paper, a probabilistic strategy is proposed to assess and evaluate the operational resilience of power distribution networks against the impacts of HILP events depending on value-at-risk …

Learning–Assisted Constraint Filtering To Enhance Power System Optimization Performance, Fouad Hasan

LSU Doctoral Dissertations

Machine learning (ML) is a powerful tool that provides meaningful insights for operators to make fast and efficient decisions by analyzing data from power systems. ML techniques have great potential to assist in solving optimization problems within a shorter time frame and with less computational burden. AC optimal power flow (ACOPF), dynamic economic dispatch (D-ED), and security-constrained unit commitment (SCUC) are the three energy management optimization functions studied in this dissertation. ACOPF is solved every 5~15 minutes. Because of the nonconvex and complex nature of ACOPF, solving this problem for large systems is computationally expensive and time-consuming. Classification and regression …

Clean Energy At The Crossroads Of America: An Integrated Resource Plan For Northern Indiana Public Service Company, Llc (Nipsco), Saad Z. Khan, Shend Boshnjaku

Master's Projects and Capstones

This paper outlines an Integrated Resource Plan (IRP) for the Indiana electric utility company, NIPSCO, looking forward to the year 2050 and evaluating different pathways to net zero emissions from the power generation sector. It is a plan for the future, identifying the most cost-effective and reliable mix of resources to meet the energy needs of NIPSCO's customers and reaching decarbonization goals by mid-century.

Reinforcement Learning-Based Resilience And Decision Making In Cyber-Physical Systems, Fisayo Sangoleye

Electrical and Computer Engineering ETDs

Cyber-physical systems (CPS) transform how humans interact with technology by integrating sensing, computation, networking, and control with physical processes to facilitate smart services and innovative applications in our environments. Recent advances in CPS have led to rapid growth in the amount of information constantly generated by people, systems, and processes. Most of this information, however, is underutilized due to the lack of efficient information utilization and decision-making techniques. Also, the increasing interconnectivity of CPSs presents security risks that, if left unaddressed, could be highly disruptive to systems, processes, and economies. In this dissertation, we present a study and proposal of …

Designing The Power System Of A Robot, Nolan Hays

Honors College Theses

This thesis outlines the acquired skills and knowledge acquired through the course of four years of Murray State University’s School of Engineering. The capstone for students in the department was to team up and complete an interdisciplinary senior design project using skills from various tracks of engineering. For this thesis, there is a greater emphasis on the electrical engineering track. The objective of the project was to build an autonomous robot to complete the various tasks within the scope of the IEEE SoutheastCon 2023 Hardware Competition. The robot was controlled via a Raspberry Pi 4 Model B. There were three …

Rebuilding Grid Governance, Joel B. Eisen, Heather E. Payne

BYU Law Review

As climate change sharpens the focus on our electricity systems, there is widespread agreement that the institutions that govern our electric grid must change to realize a clean energy future in the timescale necessary. Scholars are actively debating how grid governance needs to change, but in this Article we demonstrate that current proposals are insufficient because they do not contemplate “rebuilding.” This Article defines “rebuilding” as ending entities tasked with grid governance and creating new ones to take their place. We propose what no one else has: an overarching framework for rebuilding any grid governance institutions.

This Article discusses when …

Mitigating Adverse Impacts Of Increased Electric Vehicle Charging On Distribution Transformers, Akansha Jain

Theses and Dissertations

There is a growing interest in electric transportation, and the number of electric vehicles (EVs) is increasing. The resulting increase in EV charging power demand has an adverse impact on the existing power grids, especially the distribution transformers. The repeated and continued overloading caused by EV charging can significantly reduce their operational life. This dissertation aims to comprehensively study the adverse impacts of EV charging on distribution transformers and provide robust and practical solutions to mitigate it. A typical North American secondary distribution system with different EV penetration levels and four realistic residential EV charging scenarios are used for the …

Design Of High-Power Ultra-High-Speed Permanent Magnet Machine, Md Khurshedul Islam

Theses and Dissertations

The demand for ultra-high-speed machines (UHSM) is rapidly growing in high-tech industries due to their attractive features. A-mechanically-based-antenna (AMEBA) system is another emerging application of UHSM. It enables portable wireless communication in the radio frequency (RF)-denied environment, which was not possible until recently. The AMEBA system requires a high-power (HP) UHSM for its effective communication performance. However, at the expected rotational speed range of 0.5 to 1 million rpm, the power level of UHSM is limited, and no research effort has succeeded to improve the power level of UHSM.

The design of HP-UHSM is highly iterative, and …

Relaxing Dc Capacitor Voltage Of Power Electronic Converters To Enhance Their Stability Margins, Ali Zakerian

Theses and Dissertations

Recently, due to the increasing adoption of distributed energy resource (DER) technologies including battery energy storage (BES) and electric vehicle (EV) systems, bidirectional power converters are becoming more popular. These converters are broadly utilized as interface devices and provide a bidirectional power flow in applications where the primary power supply can both supply and receive energy. A dc capacitor, called the dc-link, is an important component of such bidirectional converters. For a wide range of applications, the converter is required to control the dc-link voltage. Commonly, a proportional-integrating (PI) controller is used by the dc capacitor voltage controller to generate …

Universal Short-Circuit And Open-Circuit Fault Detection For An Inverter, Buck Brown

All Theses

Short-circuit and open-circuit faults of an inverter’s power device often lead to catastrophic failure of the entire system if not detected and acted upon within a few microseconds, particularly for emerging wide bandgap (WGB) power semiconductors. While a significant amount of research has been done on the fast and accurate protection and detection of short-circuit faults, there has been less success corresponding to the research on open-circuit faults. Common downfalls include protection and detection that are too application-specific, take longer than a couple of microseconds, and are not cost-efficient. This study proposes a new open-circuit fault protection and detection system …

Torque And Power Capabilities Of Coreless Axial Flux Machines With Surface Pms And Halbach Array Rotors, Yaser Chulaee, Donovin Lewis, Matin Vatani, John F. Eastham, Dan Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper investigates employing a Halbach PM rotor array to increase torque and power density within coreless axial flux permanent magnet (AFPM) machines. Analytical and 2/3-dimensional finite element analysis (FEA) methods are developed to study torque and power capabilities within an example double-rotor, single-stator coreless AFPM machine with a PCB stator. Compared to a surface PM topology of the same mass and volume, employing a Halbach array increases torque density by as much as 30% through increased airgap flux density amplitude. Multiple parametric studies are performed to explore methods of increasing torque and power density while employing Halbach arrays combined …

Design Optimization Of A Direct-Drive Wind Generator With Non-Rare-Earth Pm Flux Intensifying Stator And Reluctance Rotor, Ali Mohammadi, Oluwaseun A. Badewa, Yaser Chulaee, Dan Ionel, Somasundaram Essakiappan, Madhav Manjrekar

Power and Energy Institute of Kentucky Faculty Publications

This paper presents a multi-objective design optimization for a novel direct-drive wind turbine generator. The proposed electric machine topology employs an outer rotor of the reluctance type and a special modular stator including three phase-windings and spoke-type permanent magnets (PMs). Each stator module includes a single coil toroidally wound around the ferromagnetic core. Consecutive stator modules are separated by PMs and include coils belonging to a different phase. An optimization method with three objectives: total power loss, weight, and torque ripple, and with one constraint for a minimum acceptable value for the power factor, is described. The design examples are …

Control And Design Of A Passive Solar Lumber Drying Kiln, Peter Chardavoyne

Honors Scholar Theses

The passive solar lumber drying kiln design, developed by EE Senior Design Team 2317 is presented, tested, and discussed. The design incorporates solar power and a custom control system to dry 12’ lumber boards inside a shipping container much faster than air-drying methods, which can take up to a year for thorough drying, though this can be extended due to the unpredictability of weather events and conditions. This work presents the design as in the final report provided by the team, but provides a more detailed explanation and analysis of the microcontroller system, testing methods and outcomes, alternate solutions and …

Considerations Of The Impacts And System-Level Mitigation Of Electric Vehicle Charging On The Integrated Resource Planning Process, Grant Wollam

All Theses

Electric vehicles (EV) are growing in popularity and therefore adoption rate. Best estimates predict a 6.2% EV adoption rate by 2035 in the southeastern United States. With this level of EV adoption, utility planners must begin to consider the impact that EVs will have on the power grid. This paper aims to help predict these EV impacts on the power grid. Specifically, an urban-commercial feeder is analyzed in detail to provide worst-case and most-likely results of varying levels of EV impact. Results show that a 26.2% peak increase is the most likely result for this feeder in 2035.

Mitigation techniques …

Simulating Dielectric Barrier Plasma Actuators With Varying Geometries, Cass Wiederkehr

Mechanical Engineering Undergraduate Honors Theses

The idea of Ionic Wind Propulsion has long been a topic of research for whether or not it can be used as a practical power source for flight. MIT researchers proved in 2018 that a plane with zero moving parts powered by Ionic Wind Propulsion was possible, and sustained flight could work with an internal power supply. However, due to the thin wire electrodes required to generate the ion cloud that made such propulsion possible, large amounts of drag rendered the plane extremely inefficient and impractical. Dielectric Barrier Discharge Devices (DBDs) are being investigated as to whether they can serve …

Multiple Output Power Supply Using Toroidal Transformers For Medium Voltage Active Gate Drivers, Samhitha Venkata Machireddy

Graduate Theses and Dissertations

When operating in high power applications, power devices dissipate tens or hundreds of watts of power in the form of heat. The ability of the power devices to withstand power and dissipation of heat across the power devices becomes a prominent requirement in designing the power converter. This challenge demands a power converter design to be more effective and consistent which factors in size, cost, weight, power density and reliability. This study aims to propose a gate driver isolated power supply design that can be used in medium voltage applications (e.g., up to 10 kV) while respecting the principle of …

Stream Processor Development Using Multi-Threshold Null Convention Logic Asynchronous Design Methodology, Wassim Khalil

Graduate Theses and Dissertations

Decreasing transistor feature size has led to an increase in the number of transistors in integrated circuits (IC), allowing for the implementation of more complex logic. However, such logic also requires more complex clock tree synthesis (CTS) to avoid timing violations as the clock must reach many more gates over larger areas. Thus, timing analysis requires significantly more computing power and designer involvement than in the past. For these reasons, IC designers have been pushed to nix conventional synchronous (SYNC) architecture and explore novel methodologies such as asynchronous, self-timed architecture. This dissertation evaluates the nominal active energy, voltage-scaled active energy, …

A Nonlinear-Model-Based High-Bandwidth Current Sensor Design For Switching Current Measurement Of Wide Bandgap Devices, Xia Du, Liyang Du, Yuxiang Chen, Yuqui Wei, Andrea Stratta, H. Alan Mantooth

Electrical Engineering Faculty Publications and Presentations

With the growing adoption of wide bandgap devices in power electronic applications, current sensor design for switching current measurement has become more important. The demands for high accuracy, high bandwidth, low cost, compact size, and galvanic isolation pose significant design challenges. The conventional modeling approach for bandwidth analysis of current transformer sensors assumes that the magnetizing inductance remains constant, which does not always hold true in high-frequency operations. This can result in inaccurate bandwidth estimation and affect the overall performance of the current sensor. To address this limitation, this paper provides a comprehensive analysis of nonlinear modeling and bandwidth, considering …

Photovoltaics, Batteries, And Silicon Carbide Power Electronics Based Infrastructure For Sustainable Power Networks, Prahaladh Paniyil

All Dissertations

The consequences of climate change have emphasized the need for a power network that is centered around clean, green, and renewable sources of energy. Currently, Photovoltaics (PV) and wind turbines are the only two modes of technology that can convert renewable energy of the sun and wind respectively into large-scale power for the electricity network. This dissertation aims at providing a novel solution to implement these sources of power (majorly PV) coupled with Lithium-ion battery storage in an efficient and sustainable approach. Such a power network can enable efficiency, reliability, low-cost, and sustainability with minimum impact to the environment.

The …