Power and Energy Commons^™

Optimal Control And Evaluation Of Shipboard Power Systems, Musharrat Sabah

Theses and Dissertations--Electrical and Computer Engineering

Electric warships are involved in complex missions consisting of multiple simultaneous operations. In order to ensure mission success, future ships must be designed in a way that optimizes their performance in the presence of complex mission loads. The focus of this research is an effort to optimally control the performance of shipboard systems during missions involving multiple scenarios or vignettes. The evaluation of the performance of mission-oriented power systems is based on the degree to which these systems deliver power to the loads required to perform the mission at hand. The performance of such systems involves a dynamic interplay between …

Machine Learning Based Three-Limb Core-Type Transformer Core Aspect Ratios Identification, Ananta Bijoy Bhadra

College of Graduate Studies: Theses & Dissertations

Power transformers are considered one of the key elements of electric grids. Transient studies include transformer transient analysis which is required for the continuous power supply. However, to perform the transient analysis, the details of the internal structure of the transformer are required which are unobtainable and considered as confidential information. Therefore, the application of topological-based transformer models is limited although the models can accurately represent the transformers. To address this concern, a novel approach utilizing Machine Learning (ML) to identify the core aspect ratios of the three-limb core-type transformer is introduced. The proposed approach, using only the voltage and …

Energy Efficiency In Additive Manufacturing: Condensed Review, Ismail Fidan, Vivekanand Naikwadi, Suhas Alkunte, Roshan Mishra, Khalid Tantawi

Engineering Technology Faculty Publications

Today, it is significant that the use of additive manufacturing (AM) has growing in almost every aspect of the daily life. A high number of sectors are adapting and implementing this revolutionary production technology in their domain to increase production volumes, reduce the cost of production, fabricate light weight and complex parts in a short period of time, and respond to the manufacturing needs of customers. It is clear that the AM technologies consume energy to complete the production tasks of each part. Therefore, it is imperative to know the impact of energy efficiency in order to economically and properly …

Re-Envisioning Electric Railway Power Systems In Dense Urban Regions, Rohama Ahmad

Dissertations and Theses

Grid decarbonization and modernization are key requisites to combat global warming. Decarbonization entails the deployment of renewable energy sources, improving the energy efficiency of major consumers, and the electrification of the transportation and building sectors. Various US states and cities have pledged to reduce greenhouse gas (GHG) emissions (e.g., the Climate Leadership and Community Protection Act (CLCPA) in New York aims to reduce emissions to 40% below 1990 levels by 2030 and then to 85% below 1990 levels by 2050) via a set of targets in terms of renewable energy, energy storage system (ESS) capacity, and the number of electric …

Cold Climate Heating Alternatives: A Feasibility Study For Heat Pumps In Far Northern Greenland, Sarah Torpie Hutchinson

Dartmouth College Master’s Theses

Building heating in the Arctic is extremely energy intensive. The cold climate of northern Greenland requires heating year-round. Qaanaaq, the northernmost village in Greenland, has 10,128 average annual heating degree days, in Celsius. Current heating relies on fossil fuels, often from an oil boiler or from diesel-powered district heating. Amidst the global transition of energy supply and consumption to reduce the use of fossil fuels, electrically based heating via heat pumps is becoming an increasingly attractive option to heat buildings more efficiently. Several heat pumps are now designed for cold climates specifically. While studies have investigated the potential and performance …

Runtime Performance Of Gamess Quantum Chemistry Application Offloaded To Gpus, Masha Sosonkina, Gabriel Mateescu, Peng Xu, Tosaporn Sattasathuchana, Buu Pham, Mark S. Gordon, Sarom S. Leang

Electrical & Computer Engineering Faculty Publications

Computational chemistry is at the forefront of solving urgent societal problems, such as polymer upcycling and carbon capture. The complexity of modeling these processes at appropriate length and time scales is mainly manifested in the number and types of chemical species involved in the reactions and may require models of several thousand atoms and large basis sets to accurately capture the chemical complexity and heterogeneity in the physical and chemical processes. The quantum chemistry package General Atomic and Molecular Electronic Structure System (GAMESS) has a wide array of methods that can efficiently and accurately treat complex chemical systems. In this …

Electrospun Pt-Tio₂ Nanofibers Doped With Hpa For Catalytic Hydrodeoxygenation, Amos Taiswa, Randy L. Maglinao, Jessica M. Andriolo, Sandeep Kumar, Jack L. Skinner

Civil & Environmental Engineering Faculty Publications

Electrospinning is utilized to fabricate catalytic nanofiber scaffold for biocrude upgrading in hydrodeoxygenation (HDO) following computational studies suggesting the need for nano-catalysts for efficient HDO conversion and selectivity. Here, Pt-TiO₂ nanofibers are fabricated through electrospinning, followed by wet impregnation with a heteropoly acid (HPA), tungstosilicic acid. Intensive heat treatments were incorporated during and after processes to obtain a HPA doped Pt-TiO₂ nano-catalyst. Catalytic HDO was performed in a batch reactor with phenol as the raw biocrude dissolved in hexadecane. The HPA doped Pt-TiO₂ catalyst demonstrated promising HDO performance of 37.2% conversion and a 78.9% selectivity to oxygen …

Estimation Of Methyl Orange Dye's Molar Absorptivity Using A Photoresistor-Based Photometer, Patricia M. Ludovice, Ramon M. Delos Santos

Physics Faculty Publications

The need to further develop solar cell technology, particularly on dye-sensitized solar cells (DSSCs), drives absorption studies of various chemical species. In this study, absorbance analysis of methyl orange (MO) dye was performed using the adapted and modified photoresistor-based photometer of Adams-McNichol et al. [1]. The research aims to improve the stability of the reference setup, while maintaining the accuracy of absorbance results it yields. The methodology includes photometer fabrication, MO dye sample preparation, and the evaluation of MO dye's molar absorptivity in an aqueous solution. Results show that the estimated molar absorptivity of MO using the voltage readings from …

Structural Construction And Surface Modification Of Copper Current Collectors For Lithium Metal Batteries, Yaohua Liang

Electronic Theses and Dissertations

Graphene, a prevalent anode material in commercial lithium-ion batteries, has reached its theoretical capacity limit. The imperative is to develop high-capacity anode materials to meet the growing demand for energy density. Lithium metal, renowned for its exceptionally high theoretical specific capacity density (3680 mAh g-1) and low reduction potential (-3.04 V, relative to the standard hydrogen electrode), is commonly dubbed the "Holy Grail" for negative electrode materials in high-energy-density batteries. However, practical advancements in lithium metal anodes face obstacles like low Coulombic efficiency, limited cycle life, and heightened reactivity to the electrolyte and internal short circuits resulting from lithium dendrite …

An Integrated Hybrid P2p-Dr Networks For A Transactive Energy Market Platform Considering Electricity Network Constraints, Sheroze Liaquat

Electronic Theses and Dissertations

No abstract provided.

Distribution System Losses Allocation Based On Circuit Theory With Distributed Generation, Ahmed S. Abdelkader, Ibrahim I. Mansy, Abdelfattah A. Eladl

Mansoura Engineering Journal

Electricity energy is the most convenient and efficient form of energy transmission and conversion. Nonetheless, losses take place while electrical power is traveling from power stations through transmission and distribution networks to the loads. Despite the high efficiency of electrical transmission and distribution networks, the huge amounts of power moving through these networks make the financial loss due to the lost energy very high and its management becomes a critical consideration for both utility providers and regulatory bodies. The efficient management of losses encompasses two major functions: the first is running the system in a way that minimizes the losses; …

Real-Time Cyber-Power Testbed Enhancement And Synchrophasor Data Generation For Anomaly Detection Using Physics-Informed Machine Learning, Vasavi Sivaramakrishnan

Graduate Theses, Dissertations, and Problem Reports (ETD)

Advanced sensing and automation are essential to managing the evolving electric power system with tight coupling of information and power system layer. However, this increasing number of cyber-physical devices brings vulnerabilities from cyber threats and extreme weather events can endanger the power system on a physical level as well. Advanced monitoring and control algorithms with human operators in the loop are needed to enable power system resiliency despite these increasing threats. These advanced algorithms require validation using a realistic test system that mimics real-world scenarios.

This work focuses on a) developing a realistic real-time cyber-power testbed with hardware-in-the-loop to generate …

Transient Simulations Of Power Systems With Inverter Interfaced Resources, Gaurish Shreedhar Gokhale

Dissertations, Master's Theses and Master's Reports

Renewable energy sources are interfaced with the electrical grid using power electronic inverters. These inverter-interfaced resources have been deployed for nearly 20 years. Still, NERC only recently highlighted the vast gap between the actual behavior of these inverters during power system transients and those observed in simulations. Simulation models need significant improvements, mainly for developing accurate inverter current controls, phase-locked loops, and fault response during different power priority modes. Additionally, only time-domain electromagnetic transient simulation tools can fully represent the fault response of the inverter-interfaced resources.

The developed simulation model of the inverter-interfaced resource is based on the recommendations made …

Modeling Of Inverter-Based Resources For Hardware In The Loop Testing Of Protection And Control Schemes, Md Aamir Rahmani

Dissertations, Master's Theses and Master's Reports

High penetration of inverter-based resources (IBR) may cause the misoperation of protective relays due to the dynamic nature of fault currents fed by the IBR during short-circuit faults. Misoperation may cause damage to power system equipment and affect the reliability of the power system. This dissertation presents an in-depth investigation into the modeling of IBR in the context of transmission line fault scenarios to understand and analyze the characteristics of fault currents fed by the IBR. The research objectives encompass the development of reliable IBR models capable of accurately replicating fault current behaviors, designing IBR operation control schemes, and implementing …

Nitrogen-Doped Graphite Felt On The Performance Of Aqueous Quinone-Based Redox Flow Batteries, Heng Zhang, Li-Xing Xia, Shan Jiang, Fu-Zhi Wang, Zhan-Ao Tan

Journal of Electrochemistry

Modification of electrode is vitally important for achieving high energy efficiency in aqueous quinone-based redox flow batteries (AQRFBs). The modification of graphite felt (GF) was carried out by means of urea hydrothermal reaction, and simultaneously, the effects of hydrothermal reaction time on the functional groups and surface structure of nitrogen-doped graphite felt were studied. The surface morphology and defect, element content and surface chemical state of the modified electrode were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) test, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance of the modified electrodes was evaluated by cyclic voltammetry, electrochemical impedance …

An In-Situ Raman Spectroscopic Study On The Interfacial Process Of Carbonate-Based Electrolyte On Nanostructured Silver Electrode, Yu Gu, Yuan-Fei Hu, Wei-Wei Wang, En-Ming You, Shuai Tang, Jian-Jia Su, Jun Yi, Jia-Wei Yan, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

The solid-electrolyte interphase (SEI) plays a key role in anodes for rechargeable lithium-based battery technologies. However, a thorough understanding in the mechanisms of SEI formation and evolution remains a major challenge, hindering the rapid development and wide applications of Li-based batteries. Here, we devise a borrowing surface-enhanced Raman scattering (SERS) activity strategy by utilizing a size optimized Ag nanosubstrate to in-situ monitor the formation and evolution of SEI, as well as its structure and chemistry in an ethylene carbonate-based electrolyte. To ensure a reliable in-situ SERS investigation, we designed a strict air-tight Raman cell with a three-electrode configuration. Based on …

Electrochemical Performance Of Porous Ceramic Supported Tubular Solid Oxide Electrolysis Cell, Heng-Ji Wang, Wen-Guo Chen, Zhou-Yi Quan, Kai Zhao, Yi-Fei Sun, Min Chen, Ogenko Volodymyr

Journal of Electrochemistry

Solid oxide electrolysis cell (SOEC) is an efficient and clean energy conversion technology that can utilize electricity obtained from renewable resources, such as solar, wind, and geothermal energy to electrolyze water and produce hydrogen. The conversion of abundant intermittent energy to hydrogen energy would facilitate the efficient utilization of energy resources. SOEC is an all-ceramic electrochemical cell that operates in the intermediate to high temperature range of 500–750 ℃. Compared with traditional low temperature electrolysis technology (e.g., alkaline or proton exchange membrane cells operating at ~100 ℃), the high-temperature SOEC can increase the electrolysis efficiency from 80% to ~100%, providing …

On The Integration Of Hydrogen Into Integrated Energy Systems: Reliability Assessment And Optimal Operation And Planning, Tao Wu

Electrical Engineering Theses and Dissertations

Hydrogen, regarded as one of the cleanest energy carriers, is gaining momentum to support the realization of net-zero emissions integrated energy systems due to its versatile applications across various energy sectors. In the near-term, blending hydrogen into integrated energy systems offers opportunities to promote hydrogen integration considering the current high levelized cost of hydrogen. However, because of the different physical properties of hydrogen, the impact of hydrogen on the reliability and optimal operation of integrated energy systems should be investigated to maximize the share of hydrogen without degrading the functionality of integrated energy systems. In the long-term, the optimal planning …

Quantum And Classical Learning Algorithms For Grid Integration Of Energy Storage And Renewables: Operation, Modelling, And Planning, Bin Huang

Electrical Engineering Theses and Dissertations

With the pressing net-zero objectives, renewable energy sources (RESs) and energy storage systems (ESSs), which serve as the main force in providing low-carbon energy and flexibility, are being integrated into the power systems at an unprecedented rate. The rising penetration trend of RESs and ESSs brings both opportunities and challenges. In the short term, the inherent intermittency of RESs and high capital costs of ESSs introduce obstacles to revenue maximization for hybrid power plants and complicate the provision of privacy-ensured, high-fidelity network modeling. Long-term planning faces the hurdle of expanding ESS capacity in microgrids while maintaining power supply resilience with …

Design, Fabrication And Characterization Of Zero Power Sensor/Harvester For Smart Grid Applications, Zeynel Guler

Mechanical Engineering ETDs

This study presents a flexible sensor/harvester device to be used in both electromagnetic sensing and energy harvesting applications for smart grids. When a current passes through a wire, the sensor detects the magnetic field created by that current. The sensor magnet interacts with the wire magnetic field resulting in a transfer of energy through the piezoelectric cantilever. Piezoelectric, conductive, magnetic, and magnetostrictive composite thin films were prepared to fabricate this device.

Initially, the magnet of the cantilever was optimized considering its shape, thickness, length, taper angle etc. via both simulations and experiments. Peak to peak voltage versus cantilever position graph …

The Need For Energy Storage On Renewable Energy Generator Outputs To Lessen The Geeth Effect, I.E. Short-Term Variations Mainly Associated With Wind Turbine Active Power Output, Tony Kealy

Articles

Many studies investigating the short-term variations associated with the power output from wind turbine generators utilise simulated or modelled data in the analysis. This current study uses short-term empirical data downloaded directly from operational wind turbines via electrical power quality meters. The empirical data shows that the short-term variations (one-second or sub-one-second timeframe) occur continuously over most of the power output range. A novel name is proposed, the Geeth Effect, for this variability phenomenon. The Geeth Effect is measured using the coefficient of variation mathematical expression and is likely contributing to (i) lower-than-expected financial and environmental benefits associated with …

Adaptive Traction, Power And Torque Control Strategies And Optimization In An All-Electric Powertrain, Aymane Hidara

Theses and Dissertations

Electric and hybrid-electric vehicles lean heavily on intricate control algorithms to provide smooth, reliable, and secure operations under any driving conditions. Three distinct supervisory control strategies have been developed, each aiming to improve reliability and vehicle performance of a dual-motor electric vehicle equipped with an all-wheel-drive, fully electric powertrain. These algorithms are adept at dynamically modulating and constraining the torque provided to the wheels, leveraging two autonomous permanent magnet electric drive units. This study utilizes a vehicle model jointly provided by MathWorks and General Motors in partnership with industry sponsors. The these strategies were implemented in the model and enhanced …

Vertical Free-Swinging Photovoltaic Racking Energy Modeling: A Novel Approach To Agrivoltaics, Koami Soulemane Hayibo, Joshua M. Pearce

Electrical and Computer Engineering Publications

To enable lower-cost building materials, a free-swinging bifacial vertical solar photovoltaic (PV) rack has been proposed, which complies with Canadian building codes and is the lowest capital-cost agrivoltaics rack. The wind force applied to the free-swinging PV, however, causes it to have varying tilt angles depending on the wind speed and direction. No energy performance model accurately describes such a system. To provide a simulation model for the free-swinging PV, where wind speed and direction govern the array tilt angle, this study builds upon the open-source System Advisor Model (SAM) using Python. After the SAM python model is validated, a …

Resilient, Sustainable, And Secure Systems Support For Ultra-Low-Power Computational Things, Nicole Tobias

All Dissertations

Wireless battery-free and energy-harvesting devices are expanding the reach and vision of the Internet of Things, where trillions of embedded computational things interconnect ubiquitously around us and inform many different aspects of our everyday lives. Designing these systems without batteries and interconnecting wires lowers maintenance, environmental, and economic costs while also extending device lifetime and deployment opportunities. Over the last decade, research on these ultra-low-power embedded sensors and systems has dramatically increased — enabling new and exciting prospects in many different scientific fields, from smart building and health monitoring applications to animal and activity tracking.

These systems are not without …

Ism-Band Energy Harvesting Wireless Sensor Node, Fnu Naveed

Graduate Theses and Dissertations

In recent years, the interest in remote wireless sensor networks has grown significantly, particularly with the rapid advancements in Internet of Things (IoT) technology. These networks find diverse applications, from inventory tracking to environmental monitoring. In remote areas where grid access is unavailable, wireless sensors are commonly powered by batteries, which imposes a constraint on their lifespan. However, with the emergence of wireless energy harvesting technologies, there is a transformative potential in addressing the power challenges faced by these sensors. By harnessing energy from the surrounding environment, such as solar, thermal, vibrational, or RF sources, these sensors can potentially operate …

Design Of A Low-Power Delay-Locked Loop-Based 8x Frequency Multiplier In 22 Nm Fdsoi, Naveed, Jeff Dix

Electrical Engineering Faculty Publications and Presentations

A low-power delay-locked loop (DLL)-based frequency multiplier is presented. The multiplier is designed in 22 nm FDSOI and achieves 8× multiplication. The proposed DLL uses a new simple duty cycle correction circuit and is XOR logic-based for frequency multiplication. Current starved delay cells are used to make the circuit power efficient. The circuit uses three 2× stages instead of an edge combiner to achieve 8× multiplication, thus requiring far less power and chip area as compared to conventional phase-locked loop (PLL) circuits. The proposed 8× multiplier occupies an active area of 0.09 mm2. The measurement result shows ultra-low power consumption …

Gpu Based Monte Carlo Estimation Of Eddy Current Losses In Electromagnetic Coil-Core System, Adwaith Ravichandran

Theses and Dissertations

A novel parallelizable probabilistic approach to model eddy currents in AC electromagnets is presented in this research. Consequently, power loss associated with the formation of these eddy currents is estimated and validated using experimental data. Furthermore, predicting the effect of ferromagnetic alternating field enhancement on power loss in the source excitation winding has been an active area of research. Unlike a stationary field, an alternating sinusoidal field diffuses partially into the ferromagnetic material leading to a predictably sub-optimal field enhancement. To model these physics, finite element techniques employ nonlinear iterative solvers which are time consuming. A novel method is developed …

Hybrid Wall Outlet For Ac Or Dc Power Delivery, Garrett Knoller, Kerr Allan, Greg Perini

Electrical Engineering

The goal of this project is to develop hybrid DC and AC wall outlets for an efficient, flexible power interface. A DC plug standard is also proposed to allow DC devices to be safely powered by the outlet with the correct DC voltage for each device. The primary objective is to create a power outlet compatible with the proposed DC plug as well as NEMA 5-15 AC plugs, enabling the same outlet to power both types of load as needed. The outlet is intended for buildings and systems transitioning to an isolated DC grid to encourage DC development and adoption. …

Dc To Ac Inverter For A Microgrid-Inspired Power Distribution Architecture For Electric Vehicles, Bryan A. Carrillo Martinez, Eli Blacklock, Paul A. Samson, William S. Holt-Hillis

Electrical Engineering

This project builds upon the prototyping of a microgrid-inspired power distribution architecture for electric vehicles (EVs). The efficacy of this prototype aims to inform a full-scale power distribution system that charges an EV battery, supports the electric grid with important ancillary services, performs peer-to-peer EV charging, and works in conjunction with other AC and DC sources and loads. The scope of this report focuses specifically on the design, construction, and testing of the DC/AC inverter. Future development of this distribution architecture will incorporate synchronous generators, a battery management system, and an Arduino/Raspberry Pi-based communication system to fully simulate an electric …

Model-Free Methods To Analyze Pmu Data In Real-Time For Situational Awareness And Stability Monitoring, Sean Kantra

All Dissertations

This dissertation presents and evaluates model-free methodologies to process Phasor Measurement Unit (PMU) data. Model-based PMU applications require knowledge of the system topology, most frequently the system admittance matrix. For large systems, the admittance matrix, or other system parameters, can be time-consuming to integrate into supporting PMU applications. These data sources are often sensitive and can require permissions to access, delaying the implementation of model-based approaches. This dissertation focuses on evaluating individual model-free applications to efficiently perform functions of interest to system operators for real-time situational awareness. Real-time situational awareness is evaluated with respect to central digitization where the PMU …