Power and Energy Commons^™

Slides: Envirofit: Making The World Fit For Humanity, Jessica Alderman

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Jessica Alderman, Director, ENVIROFIT

15 slides

Slides: Multi-Dimensional Energy Poverty Index (Mepi), Morgan Bazilian

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Dr. Morgan Bazilian, Deputy Director, Joint Institute for Strategic Energy Analysis (JISEA), National Renewable Energy Laboratory (NREL)

8 slides

Agenda: 2012 Energy Justice Conference And Technology Exposition, University Of Colorado Boulder. Center For Energy & Environmental Security, University Of Colorado Boulder. Colorado European Union Center Of Excellence, University Of Colorado Boulder. Presidents Leadership Institute

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Co-sponsored with the Colorado European Union Center of Excellence and the Presidents Leadership Institute at the University of Colorado Boulder.

The ability to harness energy is fundamental to economic and social development. Worldwide, almost 3 billion people have little or no access to beneficial energy resources for cooking, heating, water sanitation, illumination, transportation, or basic mechanical needs. Energy poverty exacerbates ill health and economic hardship, and reduces educational opportunities, particularly for women and children. Specifically, access to efficient and affordable energy services is a prerequisite for achieving the Millennium Development Goal (MDG) relating to poverty eradication.

In response, the UN …

Slides: Appropriate Sustainable Energy Technologies: A Light To The World, Lakshman D. Guruswamy, Jason B. Aamodt, Blake Feamster

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Jason Aamodt, Attorney; Adjunct Professor, University of Tulsa

15 slides

Slides: Meeting The Needs Of Women Through Clean Cooking Solutions, Corinne Hart

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Corinne Hart, Program Manager, Gender and Markets, Global Alliance for Clean Cookstoves

20 slides

Slides: Draft Power In Developing Country Agriculture--South Asia, Arjun Makhijani

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Dr. Arjun Makhijani, President, Institute for Energy and Environmental Research (IEER)

13 slides

Slides: Sources Of Electrical Energy For Those Who Are Remote And Poor, Frank Barnes

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Dr. Frank Barnes, Distinguished Professor, Electrical, Computer, and Energy Engineering, University of Colorado

24 slides

Slides: Impacts Of Energy Deficits In Cooking, Illumination, Water, Sanitation, And Motive Power, Paul S. Chinowsky

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Dr. Paul Chinowsky, Director, Mortenson Center in Engineering for Developing Communities; Professor, University of Colorado

25 slides

Slides: The Green Climate Fund: Challenges And Opportunities: Some Thoughts On How The Green Climate Fund Could Close The Energy Justice Gap, Martin Hiller

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Martin Hiller, Director‐General, Renewable Energy and Energy Efficiency Partnership (REEEP), Vienna, Austria

22 slides

Slides: Nokero: Power To The Powerless, Stephen Katsaros

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Stephen Katsaros, Inventor, Founder, and CEO, Nokero

13 slides

Slides: Session 3: Decision-Making And The Energy Poor, Andrew Yager

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Andrew Yager, United Nations Department of Economic and Social Affairs, Division for Sustainable Development

33 slides

Slides: Unido: Partner For Prosperity, Kandeh K. Yumkella

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Dr. Kandeh Yumkella, Chairman, UN Energy; Director General, United Nations Industrial Development Organization (UNIDO)

16 slides

Analysis Of Compensation Techniques Applied To The Control Of Converter Connected Synchronous Wind Turbines And Dfig’S During Grid Disturbances., Joseph Kearney, Michael Conlon, Eugene Coyle

Conference papers

This paper investigates control schemes to improve the performance of converter connected synchronous generators and DFIG’s to grid voltage unbalance and grid faults. Both the synchronous generator with a full converter and a DFIG are modelled in Matlab/Simulink. The control schemes of both turbines are modified to improve their performance during grid disturbances including grid voltage unbalance and single-phase faults. These disturbances are introduced into the models at specific times to analyse the performance of the wind generation systems. The performances of both systems to the grid disturbances are compared and the results are analysed.

An Energy Survey Of The Church Lane Building At Dit, Joseph Teehan

Other resources

Within the European Union, the collective governments have introduced broad energy policies in order to increase energy efficiency and improve energy performance in new and existing buildings, within each member state. The following dissertation considers energy and how energy is used within the context of global and local consumption in an extensive literature review. Where does the future lie for Ireland and its energy sources? Policies, standards and regulations associated with energy efficiency and the Energy Performance of Buildings Directive (EPBD) are defined and briefly explained. The status of how well the response from the commercial building market to Building …

Influences Of Particle Size And Sulfuric Acid Treatment On The Electrochemical Performance Of Bamboo Charcoal, Yu Yao, Ai-Shui Yu

Journal of Electrochemistry

The bamboo charcoal had been milled and treated by sulfuric acid. The influences of as-prepared material particle size and sulfuric acid treatment on the electrochemical performance had been studied. The result displays that the bamboo charcoal with mean particle size about 5 μm has the best first coulombic efficiency. Sulfuric acid treatment could raise the discharge capacity of bamboo charcoal, and the first discharge capacity of 328.2 mAh·g^-1 was obtained with the bamboo charcoal treated by sulfuric acid for 18 h. Furthermore, the capacity of 302.3 mAh·g^-1 could be maintained for 50 cycles, showing good cycle performance.

Carbon Nanotubes With Ni2P Nanoparticles As A Counter Electrode In Dye-Sensitized Solar Cells, Yan-Ye Dou, Nan-Fu Yan, Guo-Ran Li, Xue-Ping Gao

Journal of Electrochemistry

Carbon nanotubes (CNTs) supported by Ni₂P nanoparticles are prepared and used as a counter electrode in dye-sensitized solar cells (DSSCs) for the first time. The CNTs-Ni₂P composite was prepared by the heat treatment of a mixed precursor including nickel chloride, sodium hypophosphite and CNTs in argon atmosphere. The X-Ray diffraction (XRD) results indicate that the as-prepared sample consists of hexagonal Ni2P and carbon nanotubes. No peaks of other nickel phosphides are observed in the XRD pattern. Microstructure of the Ni₂P-CNTs composite was investigated using transmission electron microscopy (TEM). It is shown that the Ni …

Electrochemical Performances Of Layered Polypyrrole/Chemically Reduced Graphene Oxide Nanocomposites As Supercapacitor Electrodes, Si-Zhe Xu, Xue-Jiao Zhou, Kun Wu, Yong-Qiang Yang, Hai-Xia Wu

Journal of Electrochemistry

Nanocomposites of polypyrrole (Ppy) and chemically reduced graphene oxide (CRGO), Ppy/CRGO, have been fabricated through in-situ polymerization of pyrrole on graphene oxide (GO) sheets. The as-synthesized Ppy/CRGO composites were characterized complementarily using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Fourier transformed infrared spectroscopy (FT-IR). By controlling the initial ratio of the GO to pyrrole, the layered composites could be obtained and their thickness could be tuned properly. The Ppy/CRGO electrodes were prepared using a mechanical compressing technique and their electrical conductivity and electrochemical properties were characterized systematically. We demonstrated that as electrodes for supercapacitor, the Ppy/CRGO composites with Ppy …

Electrocatalytic Activities Of Mb/Aunps/Mwnts/Gc Electrode For Hydrogen Peroxide Reduction, Zheng-Juan Huang, Hua-Ping Peng, Dai-Jun Cha, Ai-Lin Liu, Wei Chen, Xin-Hua Lin, Yong-Ji You

Journal of Electrochemistry

A novel matrix, multiwalled carbon nanotubes supported Au nanoparticles composite nanomaterial (AuNPs/MWNTs), for immobilization of protein and biosensing was designed using a simple and effective one-step in situ synthesis route. Using myoglobin (Mb) as a model, the direct electrochemistry of the immobilized proteins on the AuNPs/MWNTs composite was studied. The results showed that the AuNPs/MWNTs composite can maintain the bioactivity and facilitate the direct electrochemistry of Mb in the Mb/AuNPs/MWNTs/GC electrode. Based on the direct electron transfer of the immobilized Mb, the protein electrode exhibited excellent electrocatalytic activity to the reduction of H₂O₂ with a linear range …

Naf-M (M = Fe, Cu) Nanocomposites As Conversion Cathode Materials For Sodium Ion Batteries, Ting Li, Zhong-Xue Chen, Yu-Liang Cao, Han-Xi Yang

Journal of Electrochemistry

The NaF-M (M = Fe, Cu) nanocomposites were prepared by high-energy ball milling using TiN grinding nanoparticles and investigated as cathode materials for sodium ion batteries. The experimental results demonstrated that NaF-Fe and NaF-Cu nanocomposites can go through electrochemical conversion reaction with Na⁺ uptake or removal, delivering a reversible capacity of ~ 150 mAh·g^-1, even through a reversed conversion from initial discharged state to a charged state. These results reveal the possibility to realize a conversion reaction as long as NaF and elemental metal particles are intimately contacted to form active nanocomposites at nanodomain, which suggests a …

Synthesis And Electrochemical Properties Of High-Capacity Cathode Material 0.08lico0.75Al0.25O2-0.92linio2, Ru-Ying Wang, Tian Qiu, Chong Mao, Wen-Sheng Yang

Journal of Electrochemistry

CoAl-LDH or Co(OH)₂ coated spherical Ni(OH)₂ precursors were obtained via a co-precipitation method at a constant pH. The mixtures of the precursors and LiOH·H₂O were annealed at high temperature in O₂ atmosphere, and then the cathode materials of 0.08LiCo_0.75Al_0.25O₂-0.92LiNiO₂, 0.08LiCoO₂-0.92LiNiO₂ and LiNiO₂ were synthesized. Effects of the coating layer were also studied. The results showed that the 0.08LiCo_0.75Al_0.25O₂-0.92LiNiO₂ material possessed the best rate and cycle life performance. The discharging capacities at 0.1C, 0.5C and 3C were …

Poly(Aniline/O-Nitroaniline): A High Capacity Cathode Material For Lithium Ion Batteries, Rui-Rui Zhao, Li-Min Zhu, Jiang-Feng Qian, Han-Xi Yang

Journal of Electrochemistry

Polyaniline can be used as a high capacity cathode material due to the advantages of material abundance and synthetic simplicity. However, its practical application in battery has been hindered by poor electrochemical utilization and cycling instability. To solve these problems, we synthesized the poly(aniline/o-Nitroaniline) (P(AN-oNA)) by introducing the electron-drawing group-nitroaniline onto the polyaniline chains, so as to enhance electrochemical utilization and stability of the polyaniline derivative. The as-prepared Li/P(AN-oNA) copolymer shows a greatly enhanced discharge capacities of 186 mAh·g^-1 at initial cycles, about 37% higher than its parent PAN, and remains 168 mAh·g^-1 after 60th cycle. Also, the …

Synthesis And Electrochemical Characterization Of Li3V2(Po4)3/C Cathode Material By Ball-Milling Assisted Microwave Method, Zhi-Yuan Tang, Wen-Feng Mao, Ji Yan, Wei Yuan, Xin-He Zhang

Journal of Electrochemistry

The cathode materials of Li₃V₂(PO₄)₃/C were successfully synthesized by ball-milling assisted microwave method and the microwave irradiation time was also optimized. It is found that the Li₃V₂(PO₄)₃/C material obtained at a microwave power of 640 W for 18 min showed the best electrochemical performance with the initial reversible capacity of 101.3 mAh·g^-1 and the remained 100.8 mAh·g^-1 at 5C rate after 300 cycles. This excellent electrochemical capability may be resulted from good crystallinity, smaller and uniform particle size of the material, showing …

Electrochemical Performance Of Yf3-Coated Li(Li0.22Ni0.17Mn0.61)O2 Cathode Material For Li-Ion Batteries, Xin Feng, Guo-Ran Li, Shi-Hai Ye, Xue-Ping Gao

Journal of Electrochemistry

The Li(Li_0.22Ni_0.17Mn_0.61)O₂ was prepared with oxalic co-precipitation and coated with an YF₃ layer by a chemical deposition method. The as-prepared and YF₃-coated Li-rich materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The results demonstrate that the as-prepared and YF₃-coated Li(Li_0.22Ni_0.17Mn_0.61)O₂ materials have a typical layered structure and are composed of sphere-like particles with a diameter of 100~200 nm. Galvanostatic charge-discharge tests show that the discharge capacity of the YF₃-coated Li(Li_{0.22 …}

Preparation And Modification Of Li4Ti5O12 As Anode Materials For Lithium-Ion Batteries, Jin-Long Liu, Zhou-Guang Lu, Yang Ren, Ya-Jie Zhu, Shan-Shan Hu, Zhong Peng, Dong Qian, You-Gen Tang

Journal of Electrochemistry

Anode Material Li₄Ti₅O₁₂ for lithium-ion batteries was successfully prepared using half-solid-state method. Furthermore, carbon coating modification of Li₄Ti₅O₁₂ was also carried out. The phase structure and morphology were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The electrochemical properties were investigated by constant current discharge-charge tests, cyclic voltammetry and electrochemical impedance techniques. The results indicated that the electrochemical performance of Li₄Ti₅O₁₂ without modification declined seriously due to the aggregation of Li₄Ti …

Electrochemical Sensing Of Guanine And Adenine Based On The Boron-Doped Carbon Nanotubes Modified Electrode, Ya-Lin Xia, Chun-Yan Deng, Juan Xiang

Journal of Electrochemistry

In this work, the boron-doped carbon nanotubes (BCNTs) modified glassy carbon (GC) electrode was simply fabricated, and the electrochemical oxidation behaviors of guanine and adenine at the BCNTs/GC electrode were investigated. Compared with the bare GC and CNTs/GC electrodes, the BCNTs-modified electrode exhibited extraordinary electrocatalytic activity towards the oxidations of guanine and adenine as indicated by the obvious increase in current responses. Moreover, the peak separation between guanine and adenine was large enough for their potential recognition in mixture without any separation or pretreatment. Therefore, the simultaneous determination of guanine and adenine was successfully achieved. The BCNTs/GC electrode showed high …

Modeling Of Power Semiconductor Devices, Tanya Kirilova Gachovska

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

One of the requirements for choosing a proper power electronic device for a converter is that it must possess a low specific on-resistance. The specific on-resistance of a bipolar device is related to the base width and doping concentration of the lightly doped drift region. This means that the doping concentration and the width of the low-doped base region in a bipolar device must be carefully considered to achieve a desired avalanche breakdown voltage and on-resistance. In order to determine the technological parameters of a semiconductor device, a one dimensional analysis is used to calculate the minimum depletion layer width, …

Completely Recursive Least Squares And Its Applications, Xiaomeng Bian

LSU New Orleans Theses and Dissertations

The matrix-inversion-lemma based recursive least squares (RLS) approach is of a recursive form and free of matrix inversion, and has excellent performance regarding computation and memory in solving the classic least-squares (LS) problem. It is important to generalize RLS for generalized LS (GLS) problem. It is also of value to develop an efficient initialization for any RLS algorithm.

In Chapter 2, we develop a unified RLS procedure to solve the unconstrained/linear-equality (LE) constrained GLS. We also show that the LE constraint is in essence a set of special error-free observations and further consider the GLS with implicit LE constraint in …

Fabrication And Characterization Of Thermomechanically Processed Sulfur And Boron Doped Amorphous Carbon Films, Lonnie Carlson

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Small scale, high power density, reliable, and long-life power supplies would be useful or even critical for space missions or the growing number of microdetectors, microsensors, and miniature vehicles. Alpha or beta particle voltaic devices could satisfy these requirements but have been shown to degrade quickly due to radiation damage. Amorphous carbon (a-C) PN junctions or PIN devices could provide radiation hardness and sufficiently high efficiency. As the range of alpha and beta particles in a-C is ~20-120μm, much thicker films than are typical are needed to maximize collection of the particle energy.

In this work, the fabrication of thermomechanically …

A Hybrid Battery Model Capable Of Capturing Dynamic Circuit Characteristics And Nonlinear Capacity Effects, Taesic Kim

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

A high-fidelity battery model capable of accurately predicting battery performance is required for proper design and operation of battery-powered systems. However, the existing battery models have at least one of the following drawbacks: 1) requiring intensive computation due to high complexity, 2) not applicable for electrical circuit design and simulation, and 3) not capable of accurately capturing the State of Charge (SOC) and predicting runtime of the battery due to neglecting the nonlinear capacity effects. This thesis proposes a novel hybrid battery model, which takes the advantages of an electrical circuit battery model to accurately predicting the dynamic circuit characteristics …

Energy Efficiency Analysis And Optimization On Mobile Video Wireless Delivery, Jianxin Sun

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

Micro-electronic industry has been boosting the capability of wireless mobile devices on full-scale. However, battery, as the only power source of most mobile devices, is experiencing a relatively slow development. Therefore, how to optimally utilize the limited battery energy on mobile devices under a predefined performance requirement becomes a critical issue. On the other hand, it is still unclear that how the battery capacity consumption is allocated on different working pattern of a specific video codec under various tempo-spatial scales and parameters, which has posed a design challenge on power management on multimedia communication system. Furthermore, an optimization method is …