Open Access. Powered by Scholars. Published by Universities.®

Power and Energy Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1981 - 2010 of 3914

Full-Text Articles in Power and Energy

Impact Analysis Of Increased Dispatchable Resources On A Utility Feeder In Opendss, Crystal Eppinger Jul 2017

Impact Analysis Of Increased Dispatchable Resources On A Utility Feeder In Opendss, Crystal Eppinger

Dissertations and Theses

Oregon utilities are replacing their portfolios of traditional fossil fuel generation with renewable generating sources. Stepping away from carbon-producing energy will leave a deficit of on-demand power, resulting in decreased reliability. To overcome these technical challenges, utilities must maximize the use of their present dispatchable resources. One such resource is the Portland General Electric (PGE) Dispatchable Standby Generation Program (DSG), which is an aggregated 105 MWs of distributed generation (DG). These resources are brought on-line when there is a critical need for power. Resources are added to the program if a transfer trip scheme is in place or a modeling …

Go to article

Energy From Chemical Reactions: Understanding The Combustion Engine, Tammy Guthrie, Kathy Prophet, Greg Herzig, Cassie Kautzer Jul 2017

Energy From Chemical Reactions: Understanding The Combustion Engine, Tammy Guthrie, Kathy Prophet, Greg Herzig, Cassie Kautzer

Middle School Lesson Plans

Automobiles produce a large amount of heat generated by the burning of gasoline. Burning gasoline is a chemical reaction that causes a phase change. This is called combustible energy. During combustion fuel combines with oxygen to release energy (such as heat, light, sound) along with another product that is often considered waste. Most of the energy produced is not used to power the automobile, but is released as heat. 19.3 pounds of the greenhouse gas, carbon dioxide, is produced from the combustion of 1 gallon of U.S. gasoline according to the U.S. Energy Information Administration.

Go to article

Anion Exchange Membrane Capacitive Deionization Cells, Ayokunle Omosebi, Xin Gao, Nicolas Holubowitch, Zhiao Li, James Landon, Kunlei Liu Jul 2017

Anion Exchange Membrane Capacitive Deionization Cells, Ayokunle Omosebi, Xin Gao, Nicolas Holubowitch, Zhiao Li, James Landon, Kunlei Liu

Center for Applied Energy Research Faculty and Staff Publications

The electrochemical response of capacitive deionization (CDI) employing a single anion exchange membrane (AEM-CDI) is contrasted to conventional two-membrane CDI (MCDI) formed with complementary anion and cation exchange membranes. Pristine activated carbon cloth electrodes that possess native positive surface charge in solution were used as both anode (positive electrode) and cathode (negative electrode) in these cells. In a separate set of tests to investigate the impact of surface charge modification on deionization responses, the single and dual membrane cells were formed with asymmetric electrodes (AEM-aCDI and aMCDI) consisting of nitric acid oxidized electrodes that possess negative surface charge as the …

Go to article

Solvent Degradation And Emissions From A 0.7mwe Pilot Co2 Capture System With Two-Stage Stripping, Jesse Thompson, Heather Nikolic, Megan Combs, Saloni Bhatnagar, Jonathan Pelgen, Keemia Abad, Kunlei Liu Jul 2017

Solvent Degradation And Emissions From A 0.7mwe Pilot Co2 Capture System With Two-Stage Stripping, Jesse Thompson, Heather Nikolic, Megan Combs, Saloni Bhatnagar, Jonathan Pelgen, Keemia Abad, Kunlei Liu

Center for Applied Energy Research Faculty and Staff Publications

The UKy-CAER team successfully tested an advanced 0.7 MWe post-combustion CO2 capture system on a coal-fired power plant using a heat integration process combined with two-stage stripping to enhance the CO2 absorber performance. One of the unique feature of the UKy-CAER integrated process is a two-stage stripping unit for solvent regeneration. The secondary stripper is empowered by the heat rejection from a conventional steam-heated (primary) stripper. The secondary stripper outlet stream at the commercial scale can be used as boiler secondary combustion air, consequently enriching the flue gas with CO2, resulting in less energy penalty required …

Go to article

Kinetic Energy Investigation, Mike Jackson Jul 2017

Kinetic Energy Investigation, Mike Jackson

High School Lesson Plans

Students will build a mouse trap powered car that converts elastic potential energy contained in the trap’s spring to linear kinetic energy of the car. The release of this energy results in a net force which leads to linear acceleration. This acceleration can be measured with Vernier Logger Pro®, and using Newton’s Second Law of Motion, the net force can be calculated. Finally, using the concept of work, the final kinetic energy of the car can be calculated. Once students become familiar with the calculation of work and energy, the teacher will challenge the students to modify their cars to …

Go to article

Size And Shape Distributions Of Primary Crystallites In Titania Aggregates, Eric A. Grulke, Kazuhiro Yamamoto, Kazuhiro Kumagai, Ines Häusler, Werner Österle, Erik Ortel, Vasile-Dan Hodoroaba, Scott C. Brown, Christopher Chan, Jiwen Zheng, Kenji Yamamoto, Kouji Yashiki, Nam Woong Song, Young Heon Kim, Aleksandr B Stefaniak, D. Schwegler-Berry, Victoria A. Coleman, Åsa K. Jämting, Jan Herrmann, Toru Arakawa, Woodrow W. Burchett, Joshua W. Lambert, Arnold J. Stromberg Jul 2017

Size And Shape Distributions Of Primary Crystallites In Titania Aggregates, Eric A. Grulke, Kazuhiro Yamamoto, Kazuhiro Kumagai, Ines Häusler, Werner Österle, Erik Ortel, Vasile-Dan Hodoroaba, Scott C. Brown, Christopher Chan, Jiwen Zheng, Kenji Yamamoto, Kouji Yashiki, Nam Woong Song, Young Heon Kim, Aleksandr B Stefaniak, D. Schwegler-Berry, Victoria A. Coleman, Åsa K. Jämting, Jan Herrmann, Toru Arakawa, Woodrow W. Burchett, Joshua W. Lambert, Arnold J. Stromberg

Chemical and Materials Engineering Faculty Publications

The primary crystallite size of titania powder relates to its properties in a number of applications. Transmission electron microscopy was used in this interlaboratory comparison (ILC) to measure primary crystallite size and shape distributions for a commercial aggregated titania powder. Data of four size descriptors and two shape descriptors were evaluated across nine laboratories. Data repeatability and reproducibility was evaluated by analysis of variance. One-third of the laboratory pairs had similar size descriptor data, but 83% of the pairs had similar aspect ratio data. Scale descriptor distributions were generally unimodal and were well-described by lognormal reference models. Shape descriptor distributions …

Go to article

Ionic Thermoelectric Paper, Fei Jiao, Ali Naderi, Dan Zhao, Joshua Schlueter, Maryam Shahi, Jonas Sundström, Hjalmar Granberg, Jesper Edberg, Ujwala Ail, Joseph W. Brill, Tom Lindström, Magnus Berggren, Xavier Crispin Jun 2017

Ionic Thermoelectric Paper, Fei Jiao, Ali Naderi, Dan Zhao, Joshua Schlueter, Maryam Shahi, Jonas Sundström, Hjalmar Granberg, Jesper Edberg, Ujwala Ail, Joseph W. Brill, Tom Lindström, Magnus Berggren, Xavier Crispin

Physics and Astronomy Faculty Publications

Ionic thermoelectric materials, for example, polyelectrolytes such as polystyrene sulfonate sodium (PSSNa), constitute a new class of materials which are attracting interest because of their large Seebeck coefficient and the possibility that they could be used in ionic thermoelectric SCs (ITESCs) and field effect transistors. However, pure polyelectrolyte membranes are not robust or flexible. In this paper, the preparation of ionic thermoelectric paper using a simple, scalable and cost-effective method is described. After a composite was fabricated with nanofibrillated cellulose (NFC), the resulting NFC–PSSNa paper is flexible and mechanically robust, which is desirable if it is to be used in …

Go to article

Design And Manufacture Of A Waste Compactor Prototype: A Step Towards Implementing A Non-Burn Health Care Waste Disposal In Developing Countries, Tito Mwinuka Jun 2017

Design And Manufacture Of A Waste Compactor Prototype: A Step Towards Implementing A Non-Burn Health Care Waste Disposal In Developing Countries, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

Non-burn technology is the only safe way of handling and disposing infectious healthcare waste. It involves steam treatment of infectious waste at temperatures higher than 121 o C for a minimum of 30 minutes before disposing them just like other municipal waste. Infectious healthcare waste is normally only about 10 25% of all healthcare waste. In this paper, design, manufacturing and testing of a waste compactor for reducing waste volume to facilitate its handling is discussed. Preliminary tests show that the waste volume can be reduced to less than 10% of its original volume using the developed compactor. Waste compactors …

Go to article

Loss Model For Gallium Nitride Dc-Dc Buck Converter, Rushi P. Patel Jun 2017

Loss Model For Gallium Nitride Dc-Dc Buck Converter, Rushi P. Patel

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

In recent years, more research has been done on Enhancement Mode Gallium Nitride (eGaN) converters, as the world is moving towards more power efficient converters. Power converters play a major role in efficiently controlling and converting electric energy used by machines, systems, and everyday products. The process to make converters more efficient was complicated and slow in the twentieth century. One of the important aspects in power electronics is to evaluate different losses and minimize losses to achieve high efficiency of the converter. With help of simulation tools such as MATLAB and LTspice, this process has become much faster and …

Go to article

Electrochemical Synthesis Of Homoallylic Alcohols And Homoallylic Amines, Wei-Qiang Zhong, Xiang-Hui Liang, Jing-Mei Huang Jun 2017

Electrochemical Synthesis Of Homoallylic Alcohols And Homoallylic Amines, Wei-Qiang Zhong, Xiang-Hui Liang, Jing-Mei Huang

Journal of Electrochemistry

Electrochemical technique has been widely applied in the organic synthesis. This review focuses on the electrochemical synthesis of homoallylic alcohols and homoallylic amines from the allylation of carbonyl compounds and imines. This method has been developed impressively, especially in the field of electrochemical allylation in a green solvent of aqueous media. Improvement of the efficiency of the electricity, regio-selectivity and chiral synthesis are expected.

Go to article

Electrocatalysis Of Nanotin Dioxide In The Battery Reaction Of Zinc-Nitrobenzene, Xu-Guo Tu, Xiang-Yu Ma, Rui-Nan He, Xiao-Juan Wang, Chen Ling, Yun-Xia Sun, Song Chen Jun 2017

Electrocatalysis Of Nanotin Dioxide In The Battery Reaction Of Zinc-Nitrobenzene, Xu-Guo Tu, Xiang-Yu Ma, Rui-Nan He, Xiao-Juan Wang, Chen Ling, Yun-Xia Sun, Song Chen

Journal of Electrochemistry

The tin dioxide (SnO2) nanoparticles were synthesized by using a simple hydrothermal route in the presence of tetrapropyl ammonium bromide (TPAB) as a surfactant. Accordingly, the titanium mesh based SnO2 catalyst electrode was prepared. The morphologies and structures of SnO2 nanostructures were characterized by scanning electron microscopy and X-ray diffraction spectrometry. The influences of reactant concentration, reaction temperature and time on the morphology of the products were investigated in detail. The electrocatalytic performance of SnO2 for the reduction of nitrobenzene with zinc was studied. Possible formation process and growth mechanism for such hierarchical SnO2 …

Go to article

Selective Direct Electro-Oxidation Of C-H Bond, Yan-Mei Liao, Qian-Qian Wu, An-Lun Zhang, Ying-Hong Zhu, Chun-An Ma Jun 2017

Selective Direct Electro-Oxidation Of C-H Bond, Yan-Mei Liao, Qian-Qian Wu, An-Lun Zhang, Ying-Hong Zhu, Chun-An Ma

Journal of Electrochemistry

Carbon-hydrogen (C-H) bond is the most basic chemical bond in organic compounds. The activation and direct conversion of C-H bond are the effective methodology for synthesis of different kinds of organic compounds from alkane compounds. The oxidative activation and functionalization of C-H bonds constitute an important and challenging area of investigation. The electro-oxidative activation of C-H bonds to form new C-O, C-C and C-N bonds has proven to be interesting and important in organic chemistry using the clean electron as the oxidant. The target C-O, C-C and C-N compounds could be selectively achieved by choosing the appropriate electrode, supporting electrolyte …

Go to article

Characteristics And Mechanism For The Simons Electrochemical Fluorination Of Methanesulfonyl Fluoride, Wen-Lin Xu, Bao-Tong Li, Da-Wei Wang, Ya-Qiong Wang Jun 2017

Characteristics And Mechanism For The Simons Electrochemical Fluorination Of Methanesulfonyl Fluoride, Wen-Lin Xu, Bao-Tong Li, Da-Wei Wang, Ya-Qiong Wang

Journal of Electrochemistry

The characteristics and mechanism for the Simons electrochemical fluorination processes were investigated during the electrochemical fluorination of CH3SO2F to CF3SO2F. The results showed that the reaction mechanism for the electrochemical fluorination of organic compounds to organic fluorides was the same as that of chemical fluorination processes using fluorinating agents such as CoF3. The electrochemical fluorination in anhydrous HF was a heterogeneous process, and nickel fluorides on the surface of the nickel anode played the role of a mediator in the Simons process to transfer oxidation potential from the anode to …

Go to article

Ionic Liquid-Supported Tempo/Polymeric Ionic-Liquid/Carbon Black Ternary Composites: Preparations And Applications In Electrochemical Oxidation Of Alcohols, Xin Lin, Cao-Cao Sun, Zhi-Rong Liu, Cheng-Chu Zeng Jun 2017

Ionic Liquid-Supported Tempo/Polymeric Ionic-Liquid/Carbon Black Ternary Composites: Preparations And Applications In Electrochemical Oxidation Of Alcohols, Xin Lin, Cao-Cao Sun, Zhi-Rong Liu, Cheng-Chu Zeng

Journal of Electrochemistry

To effectively recover redox catalyst and supporting electrolyte, a novel ternary composite consisting of ionic liquid-supported TEMPO, polymeric ionic-liquid and carbon black was prepared. The ionic-liquid supported redox catalyst TEMPO-IL-BF4 was firstly synthesized from 4-hydroxy-2,2,6,6-tetramethylpiperidine-N-oxyl, and followed by the reaction of polydimethyldiallylammonium chloride (PDDA) and bis(trifluoromethane)sulfonimide lithium salt (LiTFSI) to form poly[diallyldimethylammonium bis(trifluoromethanesulfonyl)imide] (PDDA(Tf2N)). A combination of the above mentioned two synthesized materials and carbon black afforded to obtain the ternary composite, which was used as the recoverable supporting electrolyte and mediator for the electrochemical oxidation of alcohol. The results indicate that various alcohols could be oxidized …

Go to article

Preparations And Applications Of Irsnox Electrode In Electrochemical Synthesis Of 2,5-Dichlorophenol, Xiang-Yu Ma, Xu-Guo Tu, Rui-Nan He, Ya Chen, Gui-Sheng Zhu, Shou-Yan Shao, Song Chen Jun 2017

Preparations And Applications Of Irsnox Electrode In Electrochemical Synthesis Of 2,5-Dichlorophenol, Xiang-Yu Ma, Xu-Guo Tu, Rui-Nan He, Ya Chen, Gui-Sheng Zhu, Shou-Yan Shao, Song Chen

Journal of Electrochemistry

The electrodes of titanium based iridium tin oxides (IrSnOx) have been prepared by traditional thermal decomposition method and further applied to the electrosynthsis of 2,5-dichlorophenol in order to explore a green and high efficient synthesis route. The results showed that the electrode surface existed apparent cracks, while the intermediate layer prepared with Sn:Sb=94:6 existed less cracks and longer life time. The main products of the electrolytic reaction were 2,5-dichlorophenol, p-chlorophenol, and 1,2,4-trichlorobenzene. The electrosynthsis yield of 2,5-dichlorophenol reached 57% and the selectivity of 2,5-dichlorophenol was as high as 93% by using the IrSnOx as an anode, which is obviously better …

Go to article

Smart And Sustainable Aquaponics, Ryan Toal, Kevin Claggett, Justin Goh Jun 2017

Smart And Sustainable Aquaponics, Ryan Toal, Kevin Claggett, Justin Goh

Electrical and Computer Engineering Senior Theses

As the global population increases, new ways of sustainable and efficient food production need to be explored in order to meet the growing demand from society. In this paper we explore the methods and functionality of an off-grid, semi-autonomous aquaponics system. This system will serve as a proof of concept for a large scale aquaponics system which can be modelled in other parts of the world where arable land is scarce. It was found that though the initial startup costs are high, it will be able to reduce the cost of food in the long run. The system implements a …

Go to article

The Solar Microgrid Project In Togo, Christian Jason Wintery, Alexander Mayorkis Jun 2017

The Solar Microgrid Project In Togo, Christian Jason Wintery, Alexander Mayorkis

Electrical and Computer Engineering Senior Theses

Danyi Mempassem, Togo, Africa has villagers in need of electricity, however, they cannot afford to put in the infrastructure and then pay the steep cost of energy from the government. The best option for energy for the village is an affordable and renewable resource but due to limitations of geography the only viable option is a photo-voltaic system. We designed a working solar microgrid tailored for the location and weather of the village which can support all of the lights, cell phone chargers, and televisions that the villagers need/desire while being reliable, sustainable, safe, and affordable. The design and implementation …

Go to article

Jump Linear Quadratic Control For Energy Management Of An Isolated Microgrid, Nathaniel Tucker Jun 2017

Jump Linear Quadratic Control For Energy Management Of An Isolated Microgrid, Nathaniel Tucker

Electrical and Computer Engineering Master's Theses

Energy security and the aging grid infrastructure in the United States are two important subjects at the crossroads between politics and technology. One proposed solution to these two issues revolves around the concept of an isolated microgrid. Isolated microgrids are becoming increasingly popular combining multiple energy generation and storage systems to diversify and secure their private energy portfolios. The work presented in this thesis applies jump linear quadratic control to the energy management of an isolated microgrid operating with solar generation, fuel cell, and battery energy storage system. A continuous finite state Markov chain is used to model the intermittent …

Go to article

Smart Grid Technology In The Developing World, Jacob R. Young Jun 2017

Smart Grid Technology In The Developing World, Jacob R. Young

Honors Projects

A smart grid is the integration of communication and information technologies with contemporary power infrastructure to enhance load service and to incorporate continually evolving end-use applications. It is the latest advancement in the areas of power generation, transmission and distribution. It has advanced beyond the traditional grid structure at every stage; a smart grid is capable of incorporating distributed generation (DG) renewable sources and has improved transmission capabilities through implementation of technologies such as Flexible AC Transmission Systems (FACTS). Through the addition of control technology in the distribution network a smart grid is able to implement “self-healing” and other methods …

Go to article

Multilayer Concentrated Windings For Axial Flux Pm Machines, Vandana Rallabandi, Narges Taran, Dan M. Ionel Jun 2017

Multilayer Concentrated Windings For Axial Flux Pm Machines, Vandana Rallabandi, Narges Taran, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Coreless axial flux machines are of interest because of the absence of stator core losses and cogging torque. These machines generally employ concentrated windings. One of the challenges with such a winding is that the torque producing MMF component that corresponds to the fundamental of the magnet excitation is accompanied by substantial asynchronous components. These harmonics cause losses in the rotor core and magnets, which can become significant at high speeds. This paper proposes a new multilayer winding arrangement to eliminate the non-torque producing MMF components. This winding is applied to a 12-coil 16-pole coreless axial flux machine. The efficacy …

Go to article

Hybrid Water Pump, Dylan W. Grant, Wei Chen Yeh Jun 2017

Hybrid Water Pump, Dylan W. Grant, Wei Chen Yeh

Electrical Engineering

This project seeks to use multiple sources to power a water pump. We will design a system which will combine inputs from solar and wind energy production to ensure the pump will have enough power to run. This will create a system powered by clean energy and will be self-sustained once completed. This will theoretically create a more sustainable source of power for the pump than only one of the sources. Because the power sources don’t require outside inputs (aside from sun and wind), the pump can be placed in a remote area. This could be very helpful in developing …

Go to article

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay Jun 2017

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Go to article

Automatic Standby Power-Saving Power Strip, Trung Nguyen Jun 2017

Automatic Standby Power-Saving Power Strip, Trung Nguyen

Electrical Engineering

The Standby Power Saving Power Strip improves on common power strip functionality. The project reduces the power loss from most electrical devices’ standby power mode, while retaining the convenience of leaving the devices plugged-in. The surge protector automatically recognizes when the plugged-in devices enter standby power mode. Then, it shuts off power to that device and automatically provides power back to the plugged-in devices, when turned on.

Go to article

Lab-Scale Circuit Breaker Module For Power System Laboratories, Amanda Barley, Allen C. Scozzari, Joshua E. Chung Jun 2017

Lab-Scale Circuit Breaker Module For Power System Laboratories, Amanda Barley, Allen C. Scozzari, Joshua E. Chung

Electrical Engineering

In this project, a circuit breaker that can simulate different types of power system faults is redesigned, constructed, and tested. They will then be implemented in power systems laboratory courses at Cal Poly. The project’s goal is to improve a previous circuit breaker design to help students better visualize how faults affect power systems in the real world. Two main improvements are made to the previous circuit breaker design. The first improvement is to power the breaker with a typical wall outlet adapter instead of the DC source from the Cal Poly power systems laboratory test benches. This lets the …

Go to article

Dual Input Microinverter For Tandem Cells, Forrest M. Lipske, Daniel A. Dich-Dang Jun 2017

Dual Input Microinverter For Tandem Cells, Forrest M. Lipske, Daniel A. Dich-Dang

Electrical Engineering

For every solar panel, there is an inverter which transforms the harvested DC electricity into AC electricity so that it can connect to the grid and power household appliances. In this project, we examined a tandem solar cell being designed by Iris Photovoltaics which has two layers with two distinct outputs, and we explored several solutions to create a microinverter which can handle dual inputs from the tandem PV and combine them into a single AC output. To examine the viability of such a microinverter, we designed and simulated the DC-DC combination portion of the specialized dual input microinverter, resulting …

Go to article

Solar Powered Electric Vehicle Charger, Jessica A. Bombardier Shaw, Andrew F. Moradpour Jun 2017

Solar Powered Electric Vehicle Charger, Jessica A. Bombardier Shaw, Andrew F. Moradpour

Electrical Engineering

This project will look into how to create an efficiently-operated solar powered electric vehicle charger. The solar panel will harvest energy from the sun that will be stored a battery pack to be readily available to charge an electric vehicle. These stations could be commercialized to be located along a highway, or personalized for a in-house installation.

Go to article

Student Experimental Farm Smart Pathway Lighting System, Emily A. Whitaker, Vineal S. Singh, Edith Rodriguez Jun 2017

Student Experimental Farm Smart Pathway Lighting System, Emily A. Whitaker, Vineal S. Singh, Edith Rodriguez

Electrical Engineering

This project works together with the Student Experimental Farm (SEF) and the DC House in order to install a smart lighting pathway system. This system will run off of DC power supplied by the solar panels connected to the DC House. This project tested and explored the group’s abilities to design and implement a full system run off of 48V DC. By installing this system it will greatly improve the ease for students to work at the SEF beyond daylight hours. The system will allow continuous dull lighting and will switch to full brightness once a person is detected. This …

Go to article

Solar Roller - Solar Powered Usb Charging Station, Aaron Bartfeld, Tanner Mjelde, Kaylan Naicker Jun 2017

Solar Roller - Solar Powered Usb Charging Station, Aaron Bartfeld, Tanner Mjelde, Kaylan Naicker

Electrical Engineering

As the necessity for renewable energy increases, solar power becomes more and more prevalent. At the same time, as technology increases, the necessity for charging one’s electronic devices also increases. The Solar Roller merges solar energy with the ability to charge one's electronic device in one compact cart. The Solar Roller is a solar-powered USB charging station that allows people of all backgrounds to develop a better understanding of alternative fuels, while charging their USB device. It has a touch screen display that provides voltage levels of the battery as well as a TV that displays solar powered information. The …

Go to article

Microgrid Protection Student Laboratory, Ian Hellman-Wylie, Joey Navarro Jun 2017

Microgrid Protection Student Laboratory, Ian Hellman-Wylie, Joey Navarro

Electrical Engineering

To better prepare students for careers in the electric power industry, specifically in the discipline of power system protection, the Electrical Engineering Department at Cal Poly San Luis Obispo proposed an initiative calling for the creation of new laboratory curriculum that uses microprocessor-based relays to give students hands-on experience in the application of protection theory. This report describes the creation of a system that meets this need by providing a laboratory-scale power system that demonstrates the use of common protective relays and protection schemes. This system provides a platform for laboratory coursework using protective relays for transmission line, transformer, and …

Go to article

Light Sensing Automated Blinds, Andrew B. Hodges, Ryan C. Flick Jun 2017

Light Sensing Automated Blinds, Andrew B. Hodges, Ryan C. Flick

Electrical Engineering

This project is solving the problem of wasted energy within buildings and homes, because currently the lights turned on inside building do not utilize natural, ambient light from the sun. Rather than having unnecessary light from a light source, the automated light sensing smart blinds can sense the amount of light outside the window and in the room, and then adjust the angle of the blinds to save energy by utilizing the available outdoor light. This way, the light source will not be running at maximum power output while there is excess light coming through the window. This project aims …

Go to article

First Prev Next Last