Power and Energy Commons^™

Parameter Estimation Technique For Models In Pss/E Using Real-Time Data And Automation, Malavika Vasudevan Menon

LSU New Orleans Theses and Dissertations

The purpose of this thesis is to use automation to create appropriate models in PSS/E with the data from Hardware-in-Loop real-time simulations. With the increase in technology of power electronics, the use of High Voltage Direct Current Technology and Flexible Alternating Current Transmission System devices in the electrical power system have increased tremendously. Static Var Compensators are widely used and it is important to have accurate and reliable models for studies relating to power systems planning and interaction. An automation method is proposed to find the parameters of an SVC model in PSS/E with the data from the Hardware-in- loop …

Harmonics Elimination In Three Phase Cascade H-Bridge Multilevel Inverter Using Virtual Stage Pwm, Amro Quedan

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The multilevel inverters are one of the great solutions that are proposed to satisfy the demand for high-power application and the significant integration of renewable energy. The conversion process from DC to AC must be done at high efficiency to decrease the energy loss and to ensure the electric grid power quality. The Total Harmonic Distortion (THD) is the most important feature that indicates the efficiency of the conversion process. In this research, due to the advantages of the cascade H-bridge inverter over other topologies, it has been used with the virtual stage PWM technique to investigate two different methods …

2017 Fall Engr333 Project Final Report (Section A), Trevor Nyeholt, Francis Kapesa, Justin Thalmayer, Erik Karlson, Kyle Van Veen, Kirk Brink, Steven Tarske, Brent Homan, Nathan De Haan, Paul Bootsma, Megan Anders, Philip Holmes, Melanie Fox, Noah Pirrotta, Abigail Berkompas, Ben Wellman, Halley Press, Christopher Greaves, Josh Templeman, Tim Bosch, Jake Zandstra, Hendrik Vermeulen

ENGR 333

Calvin College currently spends $836,000 annually on natural gas consumption. The engineering 333-A class was tasked with the question, "What would it take for Calvin College to save $75,000 per year on natural gas costs". The class was split into five groups (Boilers, Dorms and Dining Hall, Academic Buildings, Finance, and PE Complex) to research possible areas of savings. Through the class' research, it was determined that Calvin College has the potential savings of $87,000 a year through the reduction of natural gas usage.

2017 Fall Engr333 Project Final Report (Section B), Eric Ball, Mitchell Debruin, Raymond Kolocek, Edwin Kpodzro, Jacob Vandekieft, Nate Anderson, Brennan Steenhoek, Darbi Meyer, Derek Vermerris, Jessica Bouma, Devon Loerop, Reuben Saarloos, Richmond Amoh, Matthew Boelens, Tyson Butler, Laura Van Winkle, Alex Keizer, Kwame Ohemeng, Cameron Richman, Julie Van De Riet

ENGR 333

Currently, Calvin College spends $2.8M on electricity and natural gas. In the recent past Calvin has alleviated some of these costs by running a cogeneration system that combusts fuel and produces electricity and heat, this old system has since been removed due to age. With the old system removed Calvin is fully reliant on grid, leading to increased electricity cost. In addition to saving Calvin money, President Leroy formally signed the President’s Carbon Commitment that announced Calvin’s intent to be Carbon neutral by 2057. To meet both the cost and emissions saving needs, the objective of the energy savings project …

Co-Simulation Framework For Power Distribution System Analysis With Humans In The Loop, Victor H. Ayon

Mechanical Engineering ETDs

Recent developments in the area of power generation have led to an increased penetration of storage and distributed energy resources (DER) in power distribution systems. As a result, new and enhanced energy management systems will be necessary as the deployment of DERs, as well as the need to control loads, continues to increase in the coming years. Advanced management systems are especially important to achieve resilient power delivery during emergency situations. During a blackout for example, a section of a distribution feeder could island to operate as a microgrid to ensure critical services such as water, food, and medical care …

Impacts Of Power System-Tied Distributed Generation On The Performance Of Protection Systems, Terver T. Maor

Electrical Engineering Theses

The dispersed integration of smaller power units in the existing utility grid is the new trend. This is largely due to changes in the power generation and distribution markets. The combination of rising cost of new construction, deregulations and improved newer power equipment technologies suitable for deferred expansions make the new trend very attractive to power companies and independent investors. Until recently, other contributions to power distribution systems from such sources as standby units were considered negligible and therefore unaccounted for during the design and operation of power systems. This view has drastically changed, largely due to the increasing penetration …

2017 Fall Engr333 Seminar Preservation, Trevor Nyeholt, Erik Karlson, Cam Richman, Tyson Butler

ENGR 333

File for student presentation, given by students in the Fall 2017 class of ENGR333.

2017 Fall Engr333 Poster (Section B), Eric Ball, Mitchell Debruin, Raymond Kolocek, Edwin Kpodzro, Jacob Vandekieft, Nate Anderson, Brennan Steenhoek, Darbi Meyer, Derek Vermerris, Jessica Bouma, Devon Loerop, Reuben Saarloos, Richard Amoh, Matthew Boelens, Tyson Butler, Laura Van Winkle, Alex Keizer, Kwame Ohemeng, Cameron Richman, Julie Van De Riet

ENGR 333

Previously, Calvin College had a cogeneration system with the purpose of generating electricity and heat, through the combustion of natural gas, for Calvin’s campus. The original co-gen system was removed in 2017 due to high costs associated with maintenance and operations. Without a co-gen system, Calvin College is fully dependent on the grid. To save money and help in the President’s Carbon Commitment, PCC, the mechanical engineering students of ENGR 333 (section B) propose the implementation of a new co-gen system.

2017 Fall Engr333 Poster (Section A), Trevor Nyeholt, Francis Kapesa, Justin Thalmayer, Erik Karlson, Kyle Van Veen, Kirk Brink, Steven Tarske, Brent Homan, Nathan De Haan, Paul Bootsma, Megan Anders, Philip Holmes, Melanie Fox, Noah Pirrotta, Abigail Berkompas, Ben Wellman, Halley Press, Christopher Greaves, Josh Templeman, Tim Bosch, Jake Zandstra, Hendrik Vermeulen

ENGR 333

Calvin College uses 161,000 MMBTU of natural gas per year, which correlates to $836,000 of annual expenses. However Calvin could save as much as $240,000 on natural gas if they were as efficient as the top performer in an energy audit of similar colleges and universities in the Midwest, conducted by Sightlines Institute. The goal of this project was to see what actions could be taken to save the college $75,000 in annual natural gas costs.

Conjugated Dynamic Modeling On Vanadium Redox Flow Battery With Non-Constant Variance For Renewable Power Plant Applications, Abu Nayem Md. Asraf Siddiquee

Student Theses and Dissertations

A parametric modeling study has been carried out to assess the impact of change in operating parameters on the performance of Vanadium Redox Flow Battery (VRFB). The objective of this research is to develop a computer program to predict the dynamic behavior of VRFB combining fluid mechanics, reaction kinetics, and electric circuit. The computer program was developed using Maple 2015 and calculations were made at different operating parameters. Modeling results show that the discharging time increases from 2.2 hours to 6.7 hours when the concentration of V2+ in electrolytes increases from 1M to 3M. The operation time during the charging …

Technology Planning For Aligning Emerging Business Models And Regulatory Structures: The Case Of Electric Vehicle Charging And The Smart Grid, Kelly R. Cowan

Dissertations and Theses

Smart grid has been described as the Energy Internet: Where Energy Technology meets Information Technology. The incorporation of such technology into vast existing utility infrastructures offers many advantages, including possibilities for new smart appliances, energy management systems, better integration of renewable energy, value added services, and new business models, both for supply- and demand-side management. Smart grid also replaces aging utility technologies that are becoming increasingly unreliable, as the average ages for many critical components in utility systems now exceed their original design lives. However, while smart grid offers the promise of revolutionizing utility delivery systems, many questions remain about …

Flexible Custom Electric Skateboard, Caleb Adam Kelsay

Electrical Engineering

At Cal Poly traveling long distances only accessible by foot such as across campus or from the car park to class can be tiring and time-consuming. While not physically demanding, the trek consumes time in our tight college life schedule. To improve our time efficiency this project provides a relatively lightweight, powered solution to quickly and effectively travel long distances while maintaining full control and safety even on hills, a current limitation of traditional skateboards.

This electric skateboard includes the battery capacity to travel all around campus on a single charge with a compact and flexible skateboard design that provides …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Mppt Control For Solar Splash Photovoltaic Array, Kelsey Zenko

Mechanical Engineering Undergraduate Honors Theses

This thesis demonstrates the ability to model and simulate the operation of Maximum Power Point Tracking, MPPT. Moreover, the MPPT technology is contextualized within the confines of the Solar Splash competition to provide the foundation for future model development and simulation for optimal competition performance. MatLab Simulink was used to model the solar panel's operation. A MPPT algorithm was written using the perturb and observe method and was implemented in the model using a buck DC to DC converter. The performance of the model with hardware in the loop using Typhoon and dSPACE, which demonstrated how the actual hardware would …

Control Of Power Electronic Interfaces In Distributed Generation., Mohammad Mohebbi

Electronic Theses and Dissertations

Renewable energy has gained popularity as an alternative resource for electric power generation. As such, Distributed Generation (DG) is expected to open new horizons to electric power generation. Most renewable energy sources cannot be connected to the load directly. Integration of the renewable energy sources with the load has brought new challenges in terms of the system’s stability, voltage regulation and power quality issues. For example, the output power, voltage and frequency of an example wind turbine depend on the wind speed, which fluctuate over time and cannot be forecasted accurately. At the same time, the nonlinearity of residential electrical …

A Silicon Carbide Power Management Solution For High Temperature Applications, Robert Murphree

Graduate Theses and Dissertations

The increasing demand for discrete power devices capable of operating in high temperature and high voltage applications has spurred on the research of semiconductor materials with the potential of breaking through the limitations of traditional silicon. Gallium nitride (GaN) and silicon carbide (SiC), both of which are wide bandgap materials, have garnered the attention of researchers and gradually gained market share. Although these wide bandgap power devices enable more ambitious commercial applications compared to their silicon-based counterparts, reaching their potential is contingent upon developing integrated circuits (ICs) capable of operating in similar environments.

The foundation of any electrical system is …

Power Interface Design And System Stability Analysis For 400 V Dc-Powered Data Centers, Yuzhi Zhang

Graduate Theses and Dissertations

The demands of high performance cloud computation and internet services have increased in recent decades. These demands have driven the expansion of existing data centers and the construction of new data centers. The high costs of data center downtime are pushing designers to provide high reliability power supplies. Thus, there are significant research questions and challenges to design efficient and environmentally friendly data centers with address increasing energy prices and distributed energy developments.

This dissertation work aims to study and investigate the suitable technologies of power interface and system level configuration for high efficiency and reliable data centers.

A 400 …

Energy Shaping Control For Stabilization Of Interconnected Voltage Source Converters In Weakly-Connected Ac Microgrid Systems, Nadia Lenora Carmita Smith

Graduate Theses and Dissertations

With the ubiquitous installations of renewable energy resources such as solar and wind, for decentralized power applications across the United States, microgrids are being viewed as an avenue for achieving this goal. Various independent system operators and regional transmission operators such as Southwest Power Pool (SPP), Midcontinent System Operator (MISO), PJM Interconnection and Electric Reliability Council of Texas (ERCOT) manage the transmission and generation systems that host the distributed energy resources (DERs). Voltage source converters typically interconnect the DERs to the utility system and used in High voltage dc (HVDC) systems for transmitting power throughout the United States. A microgrid …

The Development Of Novel Interconnection Technologies For 3d Packaging Of Wire Bondless Silicon Carbide Power Modules, Sayan Seal

Graduate Theses and Dissertations

This dissertation advances the cause for the 3D packaging and integration of silicon carbide power modules. 3D wire bondless approaches adopted for enhancing the performance of silicon power modules were surveyed, and their merits were assessed to serve as a vision for the future of SiC power packaging. Current efforts pursuing 3D wire bondless SiC power modules were investigated, and the concept for a novel SiC power module was discussed. This highly-integrated SiC power module was assessed for feasibility, with a focus on achieving ultralow parasitic inductances in the critical switching loops. This will enable higher switching frequencies, leading to …

Integration Of Thin Film Tpv Cells To Cvd Diamond Heat Spreaders, Emma J. Renteria

Electrical and Computer Engineering ETDs

In this work, techniques to isolate thermophotovoltaic (TPV) devices from the growth substrate and their subsequent integration with Chemical Vapor Deposition (CVD) diamond heat spreaders will be discussed, with the envisioned goal of fabricating thermally managed cells. CVD diamond heat spreaders are a great option for thermal management of TPV cells. The key requirement, however, is the bonding of the TPV cell directly onto the diamond wafer without the presence of thick (>350 μm) growth substrates, which can offer significant thermal resistance.

The first approach is to release GaSb epitaxial layers from GaSb substrates. However, this is challenging due …

Microgrid Energy Management With Flexibility Constraints: A Data-Driven Solution Method, Okan Ciftci

LSU Master's Theses

Microgrid energy management is a challenging and important problem in modern power systems. Several deterministic and stochastic models have been proposed in the literature for the microgrid energy management problem. However, more accurate models are required to enhance flexibility of the microgrids when accounting for renewable energy and load uncertainties. This thesis proposes key contributions to solve the energy management problem for smart building (or small-scale microgrid). In Chapter 3, a deterministic energy management model is presented taking into account system flexibility requirements. Energy storage systems are deployed to enhance the grid flexibility and ramping capability. The objective function of …

A Case Study : An Economic Evaluation Of Liqufied Natural Gas (Lng) Fuel For New Ships Of Korean Ship Owners, Hyuntae Kim

World Maritime University Dissertations

No abstract provided.

Lng As A Marine Fuel In Malta : Case Study : Regulatory Analysis And Potential Scenarios For Lng Bunkering Infrastructure, Mark Philip Cassar

World Maritime University Dissertations

No abstract provided.

Investigation Of Auxiliary Power Potentials Of Solar Photovoltaic Applications On Dry Bulk Carrier Ships, Wandifa Saidyleigh

World Maritime University Dissertations

No abstract provided.

Multi-Mw Solar Pv Pumping System With Capacity Modulation And Battery Voltage Support, Oluwaseun M. Akeyo, Vandana Rallabandi, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Solar photovoltaic (PV) renewable energy systems are undergoing major technological developments and large-scale field deployment and electric grid integration. This paper proposes a method of expanding the capacity of an existing irrigation farm with additional pumps powered by solar PV. The system includes PV arrays and battery energy storage connected to a common dc bus, which energizes an array of variable speed inverter driven pumps. Capacity modulation is achieved by energizing an optimal number of pumps required in order to meet a particular load demand with minimum supply energy. A grid connection to the dc bus of the power electronic …

Hardware Based Testing Of Communication Based Control For Dc Microgrid, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper further describes our work presented in Industry Application Society 2016 Conference, with more details related to the control and operation of the microgrid. The DC microgrid facility was custom designed and implemented at CCNY with minimal off-the-shelf components to enable flexibility and reconfiguration capability. The design steps, requirements, and experimental results of the developed testbed were discussed. As a case study, a central controller for energy management algorithm was developed and tested under several operational scenarios. The experimental results verify the applicability of the developed testbed for validating DC microgrid controllers.

Special Issue On Supercapacitors, Xiao-Gang Zhang

Journal of Electrochemistry

/

Strategies To Enhance Energy Density For Supercapacitors, Jun-Wei Lang, Xu Zhang, Ru-Tao Wang, Xing-Bin Yan

Journal of Electrochemistry

The biggest advantage of supercapacitor lies in not only the excellent pulse and fast charging-discharging performance, but also the characteristics of long cycle life and wide operating temperature window with no pollution. However, the energy density of supercapacitor is low. In this paper, the working principle, the development status, defects and improvement method of supercapacitors are introduced. Based on the research workes of the supercapacitors with high energy density in our group, combined with the literature reports in recent years, the strategies to promote the energy density of supercarpacitors will be focused. The strategies for the enhancement of energy density …

Porous Carbon Materials Produced By Koh Activation For Supercapacitor Electrodes, Jiang-Lin Ye, Yan-Wu Zhu

Journal of Electrochemistry

Porous carbon materials with high specific surface area and excellent conductivity have wide applications in supercapacitor electrodes. Much effort has been made to synthesize and tailor the microstructures of porous carbon materials via various activation procedures (physical and chemical activations). In particular, the chemical activation using potassium hydroxide (KOH) as an activating reagent is promising because of the well-defined micropore size distribution and ultrahigh specific surface area up to 3000 m²·g^-1 of the resulting porous carbons. Based mainly on the previous works taken by the authors and collaborators in the field, we have summarized the activation mechanism …

Recent Advances On Carbon And Transition Metallic Compound Electrodes For High-Performance Supercapacitors, Dun Lin, Xi-Yue Zhang, Yin-Xiang Zeng, Ming-Hao Yu, Xi-Hong Lu, Ye-Xiang Tong

Journal of Electrochemistry

Supercapacitors (SCs) have stimulated intensive interests for their promising applications in electric vehicles and portable electronics, etc. Electrode material is the most important key component of SCs, which vastly determines the performance of SCs. Carbon and transition metallic compound materials have attracted considerable attention and been widely explored as electrode materials. However, the insufficient capacitance of carbon materials and unsatisfactory conductivity and cyclic stability of transition metallic compounds severely limit their implementation as robust SC electrodes. Herein, we highlight our recent efforts to boost the capacitive performance of carbon and metal oxide/nitride electrodes by rationally structural and componential design. The …