Power and Energy Commons^™

Developing A Medium-Voltage Three-Phase Current Compensator Using Modular Switching Positions, Vinson Jones

Graduate Theses and Dissertations

The objective of this thesis is to present the context, application, theory, design, construction, and testing of a proposed solution to unbalanced current loading on three-phase four-wire systems. This solution, known as the Medium-Voltage Unbalanced Current Static Compensator or MV-UCSC, is designed to recirculate currents between the three phases of adistribution system. Through this redistribution of the currents negative- and zero-sequence current components are eliminated and a balanced load is seen upstream from the point of installation. The MV-UCSC as it operates in the distribution system is presented followed by its effect on traditional compensation equipment. The construction of the …

Dc House Network Design And Modeling, Timmy Huu Nguyen, Joseph Shafie

Electrical Engineering

Although electricity is a necessity for nearly everything in daily life, many developing countries are unable to provide easy access to this utility. Often times within these developing countries, many renewable energy sources exist that are readily accessible to these same people that don’t have access to electricity within their homes, such as solar energy. However, the nature of renewable energy is that most renewable energy lacks consistency in power delivery throughout the day. An example of this is that solar energy isn’t available during the night. These small communities are often comprised of people that are familiar with each …

Design Of A 350 Kw Silicon Carbide Based 3-Phase Inverter With Ultra-Low Parasitic Inductance, Matthew Feurtado

Graduate Theses and Dissertations

The objective of this thesis is to present a design for a low parasitic inductance, high power density 3-phase inverter using silicon-carbide power modules for traction application in the electric vehicles with a power rating of 350 kW. With the market share of electric vehicles continuing to grow, there is a great opportunity for wide bandgap semiconductors such as silicon carbide (SiC) to improve the efficiency and size of the motor drives in these applications. In order to accomplish this goal, careful design and selection of each component in the system for optimum performance from an electrical, mechanical, and thermal …

Growth And Characterization Of Semiconductor Materials And Devices For Extreme Environments Applications, Abbas Sabbar

Graduate Theses and Dissertations

Numerous industries require electronics to operate reliably in harsh environments, such as extreme high temperatures (HTs), low temperature (LT), radiation rich environments, multi-extreme, etc. This dissertation is focused on two harsh environments: HT and multi-extreme.

The first study is on HT optoelectronics for future high-density power module applications. In the power modules design, galvanic isolation is required to pass through the gate control signal, reject the transient noise, and break the ground loops. The optocoupler, which consists of a lighting emitting diode (LED) and photodetector (PD), is commonly used as the solution of galvanic isolation at room temperatures. There is …

A Resilience Metric For Modern Power Distribution Systems, Tyler Bennett Phillips

Boise State University Theses and Dissertations

Modern society has become increasingly reliant on the functioning of critical infrastructure. It is considered so vital that its incapacitation or destruction would have debilitating effects on the global economy, national security, and public health and safety. The electrical power system is uniquely positioned, as it is essential for all other sectors of critical infrastructure to operate as intended. However, it is constantly at risk due to factors such as natural disasters, climate change, aging infrastructure, and cyber threats. Thus, ensuring the efficient and continuous supply of electricity is of utmost importance and the topic of this dissertation.

The work …

Smart Solar Charge Controller, Aria Pegah, Miclaine Emtman

Electrical Engineering

The technology of photovoltaics has been quickly evolving as we move toward a future with more clean energy. Energy conversion efficiency is key to making these systems the viable option amongst other sources of power. This project proposes a way to increase the power yield from a solar system by implementing smarter algorithms in the maximum power point tracking (MPPT) component of the system. MPPT is critical because environmental conditions may vary significantly for any given system due to irradiance and shading. The proposed method for MPPT utilizes a controller that uses swarm intelligence to do the power tracking.. This …

Design And Evaluation Of High Power, High Efficiency And High Power Density Motor Drives For More Electric Aircrafts, Zhao Yuan

Graduate Theses and Dissertations

More-electric aircraft (MEA) is an attractive concept as it can reduce carbon dioxide emission, relieve fossil-fuel consumption, improve the overall efficiency of aircraft, and reduce the operational costs. However, it poses substantial challenges in designing a high-performance motor drive system for such applications. In the report of Aircraft Technology Roadmap to 2050, the propulsion converter is required to be ultra-high efficiency, high power density, and high reliability. Though the wide band-gap devices, such as the Silicon-carbide based Metal Oxide Silicon Field Effect (SiC-MOSFET), shows better switching performance and improved high-temperature performance compared to the silicon counterparts, applying it to the …

High-Temperature Optoelectronic Device Characterization And Integration Towards Optical Isolation For High-Density Power Modules, Syam Madhusoodhanan

Graduate Theses and Dissertations

Power modules based on wide bandgap (WBG) materials enhance reliability and considerably reduce cooling requirements that lead to a significant reduction in total system cost and weight. Although these innovative properties lead power modules to higher power density, some concerns still need to be addressed to take full advantage of WBG-based modules. For example, the use of bulky transformers as a galvanic isolation system to float the high voltage gate driver limits further size reduction of the high-temperature power modules. Bulky transformers can be replaced by integrating high-temperature optocouplers to scale down power modules further and achieve disrupting performance in …

Fractional Order Identification Method And Control: Development Of Control For Non-Minimum Phase Fractional Order System, Majid Abdullah Alhomim

Graduate Theses and Dissertations

The increasing use of renewable energy has resulted in the need for improved a dc-dc converters. This type of electronic-based equipment is needed to interface the dc voltages normally encountered with solar arrays and battery systems to voltage levels suitable for connecting three phase inverters to distribution level networks. As grid-connected solar power levels continue to increase, there is a corresponding need for improved modeling and control of power electronic converters. In particular, higher levels of boost ratios are needed to connect low voltage circuits (less than 1000 V) to medium voltage levels in the range of 13 kV to …

Robust Control Of A Multi-Phase Interleaved Boost Converter For Photovoltaic Application Using Μ-Synthesis Approach, Badur Mueedh Alharbi

Graduate Theses and Dissertations

The high demand of energy efficiency has led to the development power converter topologies and control system designs within the field of power electronics. Recent advances of interleaved boost converters have showed improved features between the power conversion topologies in several aspects, including power quality, efficiency, sustainability and reliability.

Interleaved boost converter with multi-phase technique for PV system is an attractive area for distributed power generation. During load variation or power supply changes due to the weather changes the output voltage requires a robust control to maintain stable and perform robustness.

Connecting converters in series and parallel have the advantages …

Iot Camera System For Monitoring Strawberry Fields, Simon Schoennauer

Master's Theses

A wireless imaging system for monitoring strawberry fields provides enough quality image data for computer vision algorithms to make meaningful yield predictions. This report contains a design for a wireless sensor network modified with mesh networking techniques to extend coverage range and a solar energy harvesting system to improve sensor node lifetime. A two hop system with six nodes is implemented in a laboratory environment validating the communication systems integrity over an 800’ range. Moving from a primary battery system to solar energy harvesting increases the module lifetime indefinitely.

Design Of A Single-Carrier Pulse Width Modulation With Submodule Fault-Tolerant Capability For Modular Multilevel Converter, Tuanku Badzlin Hashfi

Student Works (2020-2029)

Multilevel converters are attracting a lot of attention and becoming one of the energy conversion choices for new topologies and control in industry applications and research fields. Modular multilevel converters (MMCs) are considered very promising among converter topologies for future medium-voltage and high-power applications compared to NPC, FC and CHB topologies. The improved phase disposition pulse width modulation (PDPWM) technique control for MMCs, which has a fault-tolerant capability, is presented. This study presents two methods to distribute pulses into submodules (SMs) by using PDPWM which has drawback to distribute the power equally among the submodules (SMs). First method, this study …

Under Frequency Load Shedding Scheme For Islanded Distribution System Based On Mixed Integer Linear Programming, Sohail Sarwar

Student Works (2020-2029)

In recent years, significant climate changes have pivoted the distribution system towards utilization of renewable energy, particularly through distributed generators (DGs). Although DGs offer many benefits, its integration affects the stability of the system, which could lead to blackout, when the grid is disconnected. The system frequency will drop drastically if DG’s generation capacity is less than the total load demand in the network. In order to sustain the system stability, Under Frequency Load Shedding (UFLS) is a commonly used technique to minimize the difference in load demand and power generation. However, existing load shedding techniques are lack in accurate …

Parameter Identification For Cells, Modules, Racks, And Battery For Utility-Scale Energy Storage Systems, Oluwaseun M. Akeyo, Vandana Rallabandi, Nicholas Jewell, Aron Patrick, Dan M. Ionel

Electrical and Computer Engineering Faculty Publications

The equivalent circuit model for utility-scale battery energy storage systems (BESS) is beneficial for multiple applications including performance evaluation, safety assessments, and the development of accurate models for simulation studies. This paper evaluates and compares the performance of utility-scale equivalent circuit models developed at multiple sub-component levels, i.e. at the rack, module, and cell levels. This type of modeling is used to demonstrate that the equivalent circuit model for a reference cell, module, or rack of a BESS can be scaled to represent the entire battery system provided that the battery management system (BMS) is active and functional. Contrary to …

Passive Control Strategies For Cooling A Non-Residential Nearly Zero Energy Office: Simulated Comfort Resilience Now And In The Future, Adam O'Donovan, Michael D. Murphy, Paul D. O'Sullivan

Publications

The average global cooling demand in non-residential buildings is expected to increase by over 275% between now and 2050. Controlled passive cooling is fundamental to successful operational performance of buildings and in mitigating energy that would otherwise be consumed by mechanical systems. The aim of this study was to determine the resilience of different passive cooling control strategies in delivering optimal comfort and energy scenarios in both current and future extreme conditions, for low energy indoor office spaces. Simulations were conducted using a calibrated TRNSYS 17 model of a nearly zero energy building. The performance of ten passive cooling control …

Intelligent Data-Driven Energy Flow Controllers For Renewable Energy And Electrified Transportation Systems, Juan Rafael Nunez Forestieri

LSU Doctoral Dissertations

In recent years, large scale deployments of electrical energy generation using renewable sources (RES) such as wind, solar and ocean wave power, along with more sustainable means of transformation have emerged in response to different initiatives oriented toward reducing greenhouse gas emissions. Strategies facilitating the integration of renewable generation into the grid and electric propulsion in transportation systems are proposed in this work.

Chapter 2 investigates the grid-connected operation of a wave energy converter (WEC) along with a hybrid supercapacitor/undersea energy storage system (HESS). A combined sizing and energy management strategy (EMS) based on reinforcement learning (RL) is proposed. Comparisons …

Feasibility Study Of The Implementation Of An Effective And Eco-Friendly Energy Management System : Case Study Of Palermo's Fincantieri Shipyard, Bryan Singer Asturias

World Maritime University Dissertations

No abstract provided.

Interleaved Multistage Step-Up Topologies With Voltage Multiplier Cells, Ahmad Alzahrani, Pourya Shamsi, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes a family of high-voltage-gain step-up dc-dc converters for photovoltaic integration application. The proposed converters are capable of converting the low voltage from input sources to a dc bus. The proposed family is constructed of interleaved single-switch multistage boost converters and voltage multiplier cells (VMC). The proposed converters feature low voltage stress across the components, equal current sharing among all phases, and a smooth input current. Moreover, the proposed family of converters has a modular structure in both the VMC and the boost stage. That is, the VMC can have N number of cells, and the boost stage …

Optimal Distribution System Reconfiguration Incorporating Dg And Variable Load Profile Using Artificial Neural Network, Hesham Hanie Youssef

Student Works (2020-2029)

Optimal network reconfiguration is a common method used in distribution systems to ensure minimum power losses are always attained. This is very important task for achieving cost effective operation. Due to varying load demands, conventional network reconfiguration techniques have to be repeated whenever system loading changes to find a new configuration that has minimum power losses. This task is time consuming and ineffective approach for a real time application. Therefore, this research proposes an Artificial Neural Network (ANN) technique for optimal distribution network reconfiguration to overcome long processing time, mainly in load variation case. The proposed method involves; (1) Implement …

The Development Of An Operational Kpi For Energy Efficiency Ship Operation, Danuja Wijayanto

World Maritime University Dissertations

No abstract provided.

Feasibility Study For A Hybrid Renewable Energy System At The International Maritime University Of Panama, Adriana Marie Quesada Juarez

World Maritime University Dissertations

No abstract provided.

A Family Of High Voltage Gain Three-Level Step-Up Converters For Photovoltaic Module Integration Applications, Ahmad Alzahrani, Pourya Shamsi, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes a family of step-up three-level DC-DC converter topologies suitable for photovoltaic panel integration applications. The proposed family is suitable to convert the 10-30 V from photovoltaic panels to a 150 V direct current distribution bus. The proposed family enhances the three-level topology in terms of the voltage gain, power density, and filtering requirements at the input level. The filtration is reduced by interleaving. The three-level boost converter's voltage gain is enhanced by utilizing several options such as switched capacitor cells, switched inductor cells, and flyback transformers or coupled inductors. The enhancement techniques are illustrated by providing the …

Facile Synthesis Of Nitrogen-Doped Graphene-Like Active Carbon Materials For High Performance Lithium-Sulfur Battery, Quan-Hua Meng, Wen-Wen Deng, Chang-Ming Li

Journal of Electrochemistry

Lithium-sulphur (Li-S) battery is regarded as a promising energy storage device because of its high theoretical capacity. However, the low S utilization and short cycling life limit the commercial applications. In this work, nitrogen-doped graphene-like carbon (NGC) materials were synthesized by simply pyrolyzing and carbonizing the mixture of melamine (C₃H₆N₆) and L-cysteine (C₃H₇NO₂S). The graphene-like structure in NGC effectively buffered the volume change of S during the discharge/charge process and improved the cycling stability. Meanwhile, nitrogen-containing functional groups in NGC facilitated the transportation of ions and suppressed the …

Electrochemical Engineering Of Carbon Nanodots, Lei Bao, Dai-Wen Pang

Journal of Electrochemistry

Aqueous batteries have been considered to be a competitive candidate for large-scale energy storage. However, most of aqueous batteries adopt inorganic electrode materials with metallic elements, which are based on the reversible insertion of metal ions, making their application being highly hindered by limited cycle life, environmental issue, high cost and low reserves. On the other hand, organic electrode materials offer the advantages of abundant reserves, tunable structures, renewability and environmental benignity. Furthermore, the wide internal space enables these organics to flexibly store various charge carriers. Organics have been investigated as the alternative to inorganic electrode materials. Herein, we review …

An Overview Of Methods And A New Three-Dimensional Fea And Analytical Hybrid Technique For Calculating Ac Winding Losses In Pm Machines, Narges Taran, Dan M. Ionel, Vandana Rallabandi, Greg Heins, Dean Patterson

Power and Energy Institute of Kentucky Faculty Publications

This article proposes a new hybrid analytical and numerical finite element (FE) based method for calculating ac eddy current losses in wire windings and demonstrates its applicability for axial flux permanent magnet electric machines. The method takes into account three-dimensional (3-D) field effects in order to achieve accurate results and yet greatly reduce computational efforts. The new 3-D FE-based method is advantageous as it employs minimum simplifications and considers the end turns in the eddy current path, the magnetic flux density variation along the effective length of coils, and the field fringing and leakage, which ultimately increases the accuracy of …

Research Progress Of Sulfur Cathode Catalytic Conversions For Lithium-Sulfur Batteries, Qin-Jun Shao, Jian Chen

Journal of Electrochemistry

The electrochemical reduction of sulfur (S) takes place through multistep reactions when S is used as a cathode material. The complete discharge of S to form final product lithium sulfide (Li₂S) is a two-electron reaction. The formation of low-order lithium polysulfides (LiPS) needs to overcome certain energy barriers. And the reduction of Li₂S₂ to Li₂S is the rate-limited step. The reaction kinetic of sulfur cathode is the critical key to determine the electrochemical performance of Li-S batteries, such as specific energy, specific power and low temperature performance, etc. Accelerating the rate-limited step kinetics …

A Model For The Anodic Carbonization Of Alkaline Polymer Electrolyte Fuel Cells, Qi-Hao Li, Ying-Ming Wang, Hua-Long Ma, Li Xiao, Gong-Wei Wang, Jun-Tao Lu, Lin Zhuang

Journal of Electrochemistry

The alkaline polymer electrolyte fuel cell (APEFC) has made appreciable progress in recent years but is still suffering performance loss during discharge with air as the oxidant. Several theories have been suggested to interpret the loss. However, efforts are still needed to reach a clear quantitative understanding. Based on the major experimental findings in combination with thermodynamics and kinetics of the reactions involved in the anode, this paper presents a model featuring layered carbonization in the anode and relevant grouped equations. The simulation results generated from the latter are compared with experiments, and possible principles to suppress the performance loss …

Porous-Electrode Theory Of Lithium Ion Battery: Old Paradigm And New Challenge, Xiao-Xiao Wang, Zi-Rui Zhou, Qiang Shan, Zeng-Ming Zhang, Jun Huang, Yu-Wen Liu, Sheng-Li Chen

Journal of Electrochemistry

A critical review on the porous electrode theory developed by Newman and his colleagues is presented. We propose several ideas for further development of this theory by analyzing its limitations. The classical Newman theory does not consider ion steric effect in describing ion transport in electrolyte solutions, which can be amended by a newly developed ion-vacancy coupled charge transfer model for ion transport in concentrated solutions. Ion transport in solid particles of active materials is essentially an ion-electron coupled transport process, and its rationality is verified by comparing the calculated and experimental diffusion coefficients of Li ⁺ ion in intercalation …

Progress And Prospects On Multifunctional Coating Separators For Lithium-Sulfur Battery, Zhuang-Zhuang Wei, Nan-Xiang Zhang, Feng Wu, Ren-Jie Chen

Journal of Electrochemistry

The development of advanced energy storage systems is crucial to meet the growing demand for electric vehicles, portable devices and renewable energy storage. Lithium-sulfur (Li-S) batteries, with their advantages of high specific energy, low cost of raw materials and environmental friendliness, are hotspots in the research field of new high performance batteries. However, there are still many problems which hinder the practical applications of lithium-sulfur batteries, such as the shuttle effect of soluble polysulfide intermediates, the growth of lithium dendrites, and the thermal stability and safety of lithium-sulfur batteries during use. The design of multifunctional coating separator is one of …

Licoo2 As Sulfur Host To Enhance Cathode Volumetric Capacity For Lithium-Sulfur Battery, Lu Wang, Xue-Ping Gao

Journal of Electrochemistry

Lithium-sulfur battery is one of the most promising secondary battery systems due to its super high theoretical gravimetric and volumetric energy densities (2600 Wh·kg^-1 and 2800 Wh·L^-1, respectively). However, the practical volumetric capacity of sulfur cathode is still unsatisfied due to the overuse of low-density host materials, such as carbon nanomaterials. Herein, commercial LiCoO₂ with the high tap density of 2.94 g·cm^-3 was used as the host material to build high density sulfur-based composite and compact electrode for increasing the volumetric capacity. Obviously, the tap density of the as-prepared S/LiCoO₂ composite was 1.90 g·cm …