Controls and Control Theory Commons^™

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

College of Graduate Studies: Theses & Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

Imitation Learning For Swarm Control Using Variational Inference, Hafeez Olafisayo Jimoh

Graduate Theses, Dissertations, and Problem Reports (ETD)

Swarms are groups of robots that can coordinate, cooperate, and communicate to achieve tasks that may be impossible for a single robot. These systems exhibit complex dynamical behavior, similar to those observed in physics, neuroscience, finance, biology, social and communication networks, etc. For instance, in Biology, schools of fish, swarm of bacteria, colony of termites exhibit flocking behavior to achieve simple and complex tasks. Modeling the dynamics of flocking in animals is challenging as we usually do not have full knowledge of the dynamics of the system and how individual agent interact. The environment of swarms is also very noisy …

Component Optimization Of A Parallel P4 Hybrid Electric Vehicle Utilizing An Equivalent Consumption Minimization Strategy, Holden Ryan Fraser

Graduate Theses, Dissertations, and Problem Reports (ETD)

Advancements in battery and electric motor technology have driven the development of hybrid electric vehicles to improve fuel economy. Hybrid electric vehicles can utilize an internal combustion engine and an electric motor in many configurations, requiring the development of advanced energy management strategies for a range of component configurations. The Equivalent Consumption Minimization Strategy (ECMS) is an advanced energy management strategy that can be calculated in-vehicle in real-time operation. This energy management strategy uses an equivalence factor to equate electrical to mechanical power when performing the torque split determination between the internal combustion engine and electric motor. This equivalence factor …

Moment-Based Reinforcement Learning For Ensemble Control, Yao-Chi Yu, Vignesh Narayanan, Jr-Shin Li

Publications

Problems involving controlling the collective behavior of a population of structurally similar dynamical systems, the so-called ensemble control, arise in diverse emerging applications and pose a grand challenge in systems science and control engineering. Owing to the severely under-actuated nature and the difficulty of placing large-scale sensor networks, ensemble systems are limited to being actuated and monitored at the population level. Moreover, mathematical models describing the dynamics of ensemble systems are often elusive. Therefore, it is essential to design broadcast controls that excite the entire population in such a way that the heterogeneity in system dynamics are robustly compensated. In …

Cooperative Deep Q -Learning Framework For Environments Providing Image Feedback, Krishnan Raghavan, Vignesh Narayanan, Sarangapani Jagannathan

Publications

In this article, we address two key challenges in deep reinforcement learning (DRL) setting, sample inefficiency, and slow learning, with a dual-neural network (NN)-driven learning approach. In the proposed approach, we use two deep NNs with independent initialization to robustly approximate the action-value function in the presence of image inputs. In particular, we develop a temporal difference (TD) error-driven learning (EDL) approach, where we introduce a set of linear transformations of the TD error to directly update the parameters of each layer in the deep NN. We demonstrate theoretically that the cost minimized by the EDL regime is an approximation …

Bldc Motor Drives With A Programmable Simplified C-Block To Generate Accurate Six-Step Pwm Based On Stm32 Microcontroller, Muhammad Rizani Rusli, Mentari Putri Jati, Mochamad Ari Bagus Nugroho, Ony Asrarul Qudsi, Indhana Sudiharto, Farid Dwi Murdianto, Endro Wahjono

Elinvo (Electronics, Informatics, and Vocational Education)

This paper presents a digital implementation of a brushless direct current motor (BLDCM) drive with a six-step pulse width modulation (PWM) using a programmable simplified C-block based on the STM32 microcontroller. The implementation is conducted through the PSIM simulation platform, which is commonly used for power electronics and motor control. This approach combines the benefits of using a programmable simplified C-block for precise and flexible programming with the PWM concepts of the STM32 microcontroller. The PWM method used on the BLDCM drive is the unipolar upper PWM technique (H~PWM_L~ON). The performance of the PWM implementation is analyzed in detail, including …

Novel Locomotion Methods In Magnetic Actuation And Pipe Inspection, Adam Cox

Mechanical Engineering Research Theses and Dissertations

There is much room for improvement in tube network inspections of jet aircraft. Often, these inspections are incomplete and inconsistent. In this paper, we develop a Modular Robotic Inspection System (MoRIS) for jet aircraft tube networks and a corresponding kinematic model. MoRIS consists of a Base Station for user control and communication, and robotic Vertebrae for accessing and inspecting the network. The presented and tested design of MoRIS can travel up to 9 feet in a tube network. The Vertebrae can navigate in all orientations, including smooth vertical tubes. The design is optimized for nominal 1.5" outside diameter tubes. We …

Digital Platform To Aid Youth Substance Abuse Prevention, Bingxuan Li

Discovery Undergraduate Interdisciplinary Research Internship

Through research and interviews, I discovered that a significant portion of students in Africa become drug addicts and drop out of school. The solution is to prevent youth substance abuse before it happens, so that more students in Africa may continue their education. With the strong motivation of expanding African student involvement in higher education, I participated DURI program to increase higher education rates in the Democratic Republic of the Congo, Africa. The local government is establishing rehabilitation centers to monitor at-risk students and prevent youth substance abuse, but due to extremely limited resources, it is critical to evaluate the …

On-Board Artificial Intelligence For Failure Detection And Safe Trajectory Generation, Eduardo Morillo

Doctoral Dissertations and Master's Theses

The use of autonomous flight vehicles has recently increased due to their versatility and capability of carrying out different type of missions in a wide range of flight conditions. Adequate commanded trajectory generation and modification, as well as high-performance trajectory tracking control laws have been an essential focus of researchers given that integration into the National Air Space (NAS) is becoming a primary need. However, the operational safety of these systems can be easily affected if abnormal flight conditions are present, thereby compromising the nominal bounds of design of the system's flight envelop and trajectory following. This thesis focuses on …

Development Of Directed Randomization For Discussing A Minimal Security Architecture, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Akkarakaran Francis Leonard, Kip Nieman, Helen Durand, Katie Tyrrell, Katrina Hinzman, Michael Williamson

Chemical Engineering and Materials Science Faculty Research Publications

Strategies for mitigating the impacts of cyberattacks on control systems using a control-oriented perspective have become of greater interest in recent years. Our group has contributed to this trend by developing several methods for detecting cyberattacks on process sensors, actuators, or both sensors and actuators simultaneously using an advanced optimization-based control strategy known as Lyapunov-based economic model predictive control (LEMPC). However, each technique comes with benefits and limitations, both with respect to one another and with respect to traditional information technology and computer science-type approaches to cybersecurity. An important question to ask, therefore, is what the goal should be of …

Optical Control System For Atmospheric Turbulence Mitigation, Martyn Lemon

All Theses

Propagation of laser light is distorted in the presence of atmospheric turbulence. This poses an issue for sensing, free-space optical communications, and transmission of power. With an ever-increasing demand for high-speed data communications, particularly between satellites, unmanned vehicles, and other systems that benefit from a point-to-point link, this issue is critical for the field. A variety of methods have been proposed to circumvent this issue. Some major categories include the manipulation of the light’s structure, an adaptive scheme at the optical receiver, scanning mirror systems, or a transmission of simultaneous signals with a goal to improve robustness.

There is an …

Modeling, Control And Estimation Of Reconfigurable Cable Driven Parallel Robots, Adhiti Raman Thothathri

All Dissertations

The motivation for this thesis was to develop a cable-driven parallel robot (CDPR) as part of a two-part robotic device for concrete 3D printing. This research addresses specific research questions in this domain, chiefly, to present advantages offered by the addition of kinematic redundancies to CDPRs. Due to the natural actuation redundancy present in a fully constrained CDPR, the addition of internal mobility offers complex challenges in modeling and control that are not often encountered in literature.

This work presents a systematic analysis of modeling such kinematic redundancies through the application of reciprocal screw theory (RST) and Lie algebra while …

Nonlinear Observers For Burning Zone Temperatures And Torque Estimation Of The Rotary Cement Kiln., Bhagyashri Aditya Bhagwat

Electronic Theses and Dissertations

Due to consistent expansion in the infrastructure and housing sectors worldwide have given a new way for the rapid growth of global cement market. Increased global demand for the cement production makes the attractive research topic which can lead to the quality and overall efficiency of the product. Measurement of the temperature in the burning zone is vital to maintain product quality and kiln efficiency in the cement industry. Often the BZT is un-measurable due to internal kiln conditions, dusty environment, extreme heat, harshness for example and this leads to kiln not being driven as efficient as possible. Multi-physics tools …

Diy Cell Incubator, Hayden James Jeanor

Electrical Engineering

The purpose of creating a cell Incubator is for the development of cell and tissue production in laboratory settings. Large scale research projects and the medical community grow cells for various reasons, including experiments and creating tissue for patients. However, they cannot simply depend on growing cells in a petri dish that sit on a rack at room temperature. To grow heathy cells in the fastest way possible, they use cell incubators. Cell incubators create an atmosphere within the incubation bay that is designed to promote cell growth. The three main components that need to be constantly regulated, using a …

Multi-Criteria Performance Evaluation And Control In Power And Energy Systems, Payam Ramezani Badr

All Dissertations

The role of intuition and human preferences are often overlooked in autonomous control of power and energy systems. However, the growing operational diversity of many systems such as microgrids, electric/hybrid-electric vehicles and maritime vessels has created a need for more flexible control and optimization methods. In order to develop such flexible control methods, the role of human decision makers and their desired performance metrics must be studied in power and energy systems. This dissertation investigates the concept of multi-criteria decision making as a gateway to integrate human decision makers and their opinions into complex mathematical control laws. There are two …

Parallel Distributed Compensation-Pid Controller Design For Maximum Power Point Tracking Of Dynamic Loaded Photovoltaic System, Anas Shomer, Helmy El Zoghby, Mohiy E. Bahgat, Soliman Sharaf

Future Engineering Journal

Control issues come from the output voltage of PV installations and systems operating in a range of irradiance and temperature. By using a DC converter, such systems are able to maintain a constant output voltage despite fluctuations in the generated voltage and load. The design of a maximum power point tracking (MPPT) on DC converter controller is presented in this article for a system. Fractional Order-Proportional Integral Derivative (FO-PID) and Parallel Distributed Compensation-Proportional Integral Derivative (PDC-PID) controllers have been implemented to the system converter as a proposed control approach. Particle Swarm Optimization (PSO) is used as optimization technique for determining …

Cybersecurity And Dynamic Operation In Practice: Equipment Impacts And Safety Guarantees, Kip Nieman, Dominic Messina, Matthew Wegener, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Biomedical Engineering: Graduate Reports and Projects

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Hypoxic Incubation Chamber, Simone Lisette Helfrich, Makenzie Nicole Jones

Master's Theses

This paper describes the design, manufacturing, and testing of a novel controllable hypoxic incubator with fully functional oxygen gas control and temperature control in a humid environment. On the current market, a majority of the few hypoxic incubators use pre-mixed gas that does not offer precise control over gas concentration. The objective for this project was to create a chamber that allows the user to set the O2 concentration to varying set points of % O2 while maintaining the chamber at a constant body temperature, CO2 level, humidity, and sterility. To start the project, multiple concepts were developed for the …

Multi-Robot Symbolic Task And Motion Planning Leveraging Human Trust Models: Theory And Applications, Huanfei Zheng

All Dissertations

Multi-robot systems (MRS) can accomplish more complex tasks with two or more robots and have produced a broad set of applications. The presence of a human operator in an MRS can guarantee the safety of the task performing, but the human operators can be subject to heavier stress and cognitive workload in collaboration with the MRS than the single robot. It is significant for the MRS to have the provable correct task and motion planning solution for a complex task. That can reduce the human workload during supervising the task and improve the reliability of human-MRS collaboration. This dissertation relies …

Event-Triggered Optimal Adaptive Control Of Partially Unknown Linear Continuous-Time Systems With State Delay, Rohollah Moghadam, Vignesh Narayanan, Sarangapani Jagannathan

Publications

This paper proposes an event-triggered optimal adaptive output feedback control design approach by utilizing integral reinforcement learning (IRL) for linear time-invariant systems with state delay and uncertain internal dynamics. In the proposed approach, the general optimal control problem is formulated into the game-theoretic framework by treating the event-triggering threshold and the optimal control policy as players. A cost function is defined and a value functional, which includes the delayed system output, is considered. First, by using the value functional and applying stationarity conditions using the Hamiltonian function, the output game delay algebraic Riccati equation (OGDARE) and optimal control policy are …

A Control Barrier Function Perspective On Lyapunov-Based Economic Model Predictive Control, Helen Durand, Aaron D. Ames

Chemical Engineering and Materials Science Faculty Research Publications

No abstract provided.

Three-Phase Ac Induction Motor Speed Control Based On Variable Speed Driver, Abdelrahim Ahmed Mohammed Ate, Rihab Gafar, Xiuyun Sun, Tahleel Abozead

Makara Journal of Technology

Massive loss of power is a concern for many countries because of the high power consumption of alternating current (AC) motors. The motor speed should be controlled to alleviate this problem and save more power. This paper proposes a simple simulation for a variable speed driver (VSD) to control the three-phase induction motor speed. The VSD consists of three parts. The converter performs from full bridge diodes to convert single-phase AC voltage into direct current voltage, and then this voltage is filtered by the RL filter and transferred to the last part, which is the inverter. The model was simulated …

Hybrid Smart Transformer For Enhanced Power System Protection Against Dc With Advanced Grid Support, Moazzam Nazir

All Dissertations

The traditional grid is rapidly transforming into smart substations and grid assets incorporating advanced control equipment with enhanced functionalities and rapid self-healing features. The most important and strategic equipment in the substation is the transformer and is expected to perform a variety of functions beyond mere voltage conversion and isolation. While the concept of smart solid-state transformers (SSTs) is being widely recognized, their respective lifetime and reliability raise concerns, thus hampering the complete replacement of traditional transformers with SSTs. Under this scenario, introducing smart features in conventional transformers utilizing simple, cost-effective, and easy to install modules is a highly desired …

Distributed Learning With Automated Stepsizes, Benjamin Liggett

All Theses

Stepsizes for optimization problems play a crucial role in algorithm convergence, where the stepsize must undergo tedious manual tuning to obtain near-optimal convergence. Recently, an adaptive method for automating stepsizes was proposed for centralized optimization. However, this method is not directly applicable to decentralized optimization because it allows for heterogeneous agent stepsizes. Furthermore, directly using consensus between agent stepsizes to mitigate stepsize heterogeneity can decrease performance and even lead to divergence.

This thesis proposes an algorithm to remedy the tedious manual tuning of stepsizes in decentralized optimization. Our proposed algorithm automates the stepsize and uses dynamic consensus between agents’ stepsizes …

Protection Of Microgrids: A Scalable And Topology Agnostic Scheme With Self-Healing Dynamic Reconfiguration, Phani Harsha Gadde

All Dissertations

Momentum towards realizing the smart grid will continue to result in high penetration of renewable fed Distributed Energy Resources (DERs) in the Electric Power System (EPS). These DERs will most likely be Inverter Based Resources(IBRs) and will be an integral part of the distribution system in the near future. The drive towards resiliency with these IBRs will enable a modular topology where several microgrids are tied together, operating synchronously to form the future EPS at the distribution level.

Since the microgrids can evolve from existing distribution feeders, they will be unbalanced in load, phases, and feeder impedances. A typical control …

Machine Learning Approach For Classifying Power Outage In Secondary Electric Distribution Network, Stephan Mgaya, Hellen Maziku

Tanzania Journal of Engineering and Technology (TJET)

Power outage is the problem that hinders social and economic development especially for developing countries like Tanzania. Frequent power outages damage electric equipment, and negatively affect the industrial production process. Power outages cannot be completely eradicated due to uncontrolled cause like natural calamities but technical challenges can be managed and hence reducing power outages. The existing manual methods used to locate power outage like customer calls is inefficient and time consuming. On the other hand, modern method like the Advanced Metering Infrastructure (AMI) still faces a challenge in effectively classifying power line outage due to the nature of imbalanced datasets. …

Control Implemented On Quantum Computers: Effects Of Noise, Nondeterminism, And Entanglement, Kip Nieman, Keshav Kasturi Rangan, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Quantum computing has advanced in recent years to the point that there are now some quantum computers and quantum simulators available to the public for use. In addition, quantum computing is beginning to receive attention within the process systems engineering community for directions such as machine learning and optimization. A logical next step for its evaluation within process systems engineering is for control, specifically for computing control actions to be applied to process systems. In this work, we provide some initial studies regarding the implementation of control on quantum computers, including the implementation of a single-input/single-output proportional control law on …

Robust Sensor Design For The Novel Reduced Models Of The Mead-Marcus Sandwich Beam Equation, Ahmet Aydin

Masters Theses & Specialist Projects

Novel space-discretized Finite Differences-based model reductions are proposed for the partial differential equations (PDE) model of a multi-layer Mead-Marcus-type beam with (i) hinged-hinged and (ii) clamped-free boundary conditions. The PDE model describes transverse vibrations for a sandwich beam whose alternating outer elastic layers constrain viscoelastic core layers, which allow transverse shear. The major goal of this project is to design a single boundary sensor, placed at the tip of the beam, to control the overall dynamics on the beam.

For (i), it is first shown that the PDE model is exactly observable by the so-called nonharmonic Fourier series approach. However, …

Implementation Of Digital Transformation In The Technical Higher Education Institutions In Tanzania, Charles Raphael

Tanzania Journal of Engineering and Technology (TJET)

Digital transformation has been prioritized recently in this era of fourth industrial revolution by various organizations for maintaining strong competitive advantage, especially in the fourth industrial revolution. The higher education institutions must likewise adopt and implement digital transformation to enrich their students with the knowledge, experience and the skills they need for a very different future. Technical higher education institutions are inevitable in the given transformation. However, very little is known regarding adoption of digital transformation in the given institutions. This study therefore examined the level of adoption of digital services in the technical higher education institutions in Tanzania. It …