Controls and Control Theory Commons^™

A Cyber-Physical Flight Simulation Platform For Real-Time Visualization Of Aircraft Dynamics And Sensor-Based Control, Gabriel Martinez, Michael Poinsett

Discovery Day - Daytona Beach

Understanding aircraft dynamics through traditional simulations can be limiting, as results are often confined to screen-based visualization. This project aims to enhance learning and experimentation by creating a system where aircraft motion can be both simulated and physically observed in real time. The primary objective is to develop a cyber-physical flight simulation platform that links mathematical models with physical hardware. The system is designed to (1) represent aircraft dynamic behavior through real-time motion and (2) provide a foundation for integrating sensors and control strategies for responsive flight behavior. The platform combines aircraft dynamic models with a hardware interface capable of …

Evaluation Of General Voronoi Diagram Decomposition For Harmonic Fields In Navigation Of Dynamic Environments, Franco Abullarade

Master's Theses

Harmonic potential fields provide provably minimum-free navigation, but any change to the workspace geometry invalidates the field and forces a costly global recomputation, typically restricting them to static environments. This thesis extends the harmonic map framework of Vlantis et al., which maps the free workspace onto a unit disk and uses an atlas of per-region transformations, to dynamic indoor settings. First, we replace their manually annotated room partition with an automatic decomposition based on the Generalized Voronoi Diagram, allowing the atlas to be built from an arbitrary occupancy grid in an automated way. Second, we introduce a localized repair procedure …

System Integration And Validation Of The Cal Poly Spacecraft Attitude Dynamics Simulator Mk. Iv, Bricen S. Rigby

Master's Theses

The Cal Poly Spacecraft Attitude Dynamics Simulator (SADS) is an ongoing project that seeks to enable the simulation and validation of sensors, actuators, and control logic related to spacecraft attitude control. The SADS platform rests atop a spher- ical air-bearing device which allows for nearly frictionless rotation in all three axes. The orientation of the platform is controlled by four reaction wheels arranged in a pyramidal configuration. Over the past few years, there have been significant updates to the reaction wheel subsystem, as well as requests for a more capable central com- puter. Therefore, a new system architecture for the …

Neural Network Technologies In The Automatical Control Systems Of Absorption Process For Pureficating Natural Gas, Abdishukurov Maqsudovich Shavkat Mr, Xuecheng Li Li Xuecheng Mr

Technical science and innovation

Analysis of methods and algorithms for synthesizing adaptive control systems for technological processes based on the neural network approach is carried out in this search. The stages of mathematical modeling of complex technological processes using neural network technology were considered. Additionally, an algorithm for solving the interpolation and extrapolation problem that arises in the training process a neural network to control system was proposed. At the final stage of this article, algorithms based on neural network technology are synthesized for the control system for the parameters of the technological process of natural gas purification by absorption

Robust Real-Time Uav Target Tracking With Onboard Vision-Based Yaw Control, Rylan Malarchick, Jose Castelblanco, Enrique Amaya, Carmen Dimario, Graysen Brinkman, Chirag Kumar, Kiwon Yoon, Sajid Berhane

Beyond: Undergraduate Research Journal

Autonomous tracking of agile unmanned aerial vehicles (UAVs) presents significant challenges for real-time perception and control systems. This work presents AIRHOUND (Autonomous Intelligent Rotorcraft for Hostile Object Unified Navigation and Detection), a UAV platform implementing vision-based yaw tracking through a modular ROS2 software architecture. The system employs YOLOv8 object detection optimized with NVIDIA TensorRT for embedded deployment on an NVIDIA Jetson Orin companion computer. Detected targets are processed through a geometric tracking module that converts pixel coordinates to angular yaw errors using pinhole camera intrinsics, with a proportional controller generating rate-limited yaw commands. These commands are streamed to a PX4 …

Integration Of Robotic Arm And Conveyor With Programmable Logic Controller, Drake A. Small

Master's Theses

To meet new curriculum demands brought on by Cal Poly's upcoming switch to semesters, a new, cross-disciplinary lab module was developed for EE 435 (Industrial Power Control and Automation). The module emphasizes career-applicable skills, preparing students for the field of controls engineering within the manufacturing industry. These skills include robotic control, computer networking and configuration, and embedded systems. The work focused on integrating a collaborative robot arm to pick-and-place boxes on a conveyor. A myCobot 320 Pi and an Ultimation Powered Roller MDR Conveyor were integrated with the existing PLC system using Modbus RTU and EtherNet/IP communication protocols, respectively. A …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Solving Linearly Constrained Quadratic Programs Using Field Programmable Analog Arrays, Tyler Wynn, Alonzo Arroyo

Electrical Engineering

This paper presents a field-programmable analog array (FPAA) implementation for solving linearly constrained quadratic programs (LCQPs) directly in the analog domain. The solver is based on a continuous-time primal-dual control architecture with integral action, anti-windup compensation, and a piecewise-linear nonlinearity for enforcing affine inequality constraints. A switched-capacitor implementation using three AN231E04 FPAAs is developed, and coefficient scaling methods are introduced to keep internal and output signals within the voltage limits of the hardware. A global scaling factor is used to reduce internal signal excursions, while solution-space scaling is shown to modify the implemented optimization coefficients and alter the local closed-loop …

Quantum Control Protocols For Robust Quantum Computing, Leeseok Kim

Electrical and Computer Engineering ETDs

The fundamental goal of quantum computing is to precisely control quantum systems to perform meaningful tasks, including implementing high-fidelity quantum gates for reliable quantum computation and accurately simulating complex quantum many- body dynamics. In this dissertation, we develop improved quantum control protocols for three distinct objectives, quantum error suppression, quantum optimal control, and analog quantum algorithms, achieving performance beyond standard approaches. First, we introduce new dynamical decoupling protocols, including both determin- istic and randomized constructions, that can substantially outperform conventional deterministic sequences. We then extend the randomized approach to dynamically corrected gates. Second, we propose a randomized quantum optimal control …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

Conceptual Model For Protecting Personal Data By Depersonalization In Information Systems: Principles, Components, And Life Cycle, Zarina Ildarovna Azizova

Chemical Technology, Control and Management

This article presents a systematic approach to personal data protection through depersonalization in the context of regulatory pressure and growing cyber threats. It proposes a comprehensive conceptual model that formalizes the de-identification process as a manageable sequence of steps, from attribute classification and method selection to mandatory verification of the result. The article also provides a comparative analysis of existing depersonalization methods in terms of their applicability within the proposed model. The model serves as a basis for the development of specific algorithms, as demonstrated by the example of a data shuffling approach.

Ultragps: A Low-Cost, Open-Source Ultrasonic Positioning System, Scott Roelker Murillo, Nnamdi Jesse Onwuzurike

Posters - 2026

We want to raise the bar in high school robotics. In Texas, and likely in many other states as well, high school robotics has reached a roadblock when it comes to autonomous navigation. In many competitions, the autonomous portion sees few, teams successfully completing tasks that require positioning and guidance. In modern robotics, it is no longer sufficient for a robot merely be “remote controlled.” They need to be able to navigate independently and adapt to the environment around them. To achieve this goal a positioning system is needed to develop the foundational algorithms for autonomous controls. However, these systems …

Tuning And Performance Of Pid Controlled Low Complexity Systems, Timothy Evans

Honors Theses

Proportional integral derivative (PID) controllers are used for precise position and orientation control in systems such as autonomous underwater vehicles (AUVs). This project supports the University of Southern Mississippi’s (USM) Robotics Club’s RoboSub AUV effort by developing, troubleshooting, and manually tuning PID controllers to characterize tracking performance and settling time across systems of increasing complexity. Initially, the project hypothesized that tracking performance would be reduced and settling times would increase as system complexity advanced from one degree-of-freedom (DOF) to two DOF. However, prior research was found that suggests that for small disturbances around an equilibrium state, separate PID-controlled DOFs can …

Identification Of Thruster Faults In Underwater Vehicles By Using Custom Encodings In Spiking Neural Networks, Donovan Gegg

LSU Master's Theses

Autonomous Underwater Vehicles (AUVs) are untethered robotic platforms used for tasks such as seafloor mapping, infrastructure inspection, and environmental monitoring. Recent technological advances have produced smaller, more affordable platforms, broadening access to research teams and small companies alike. This miniaturization comes at the cost of them handling drawbacks associated with a more compact machine such as reduced battery capacity as well as limited processing and sensing capabilities. These constraints make small-sized marine vehicle’s reliability critical as they can cause malfunctions, making the loss of a vehicle more likely. Actuator faults are particularly consequential as unintended and unstable control in an …

Algorithms Of Stable Adaptive Observation Of A Multidimensional Undefinite Object, Tursunova Sadoqat Abdusalom Qizi

Chemical Technology, Control and Management

This article presents an algorithm for simultaneously estimating the parameters and state coordinates of a multidimensional control object when some of its state variables are not directly measured. The inability to measure all state variables (coordinates) of an object is a well-known drawback of identification schemes. Such conditions require the construction of adaptive state observers. This work demonstrates that when identifying the parameters of a mathematical model for an uncertain multidimensional object, the asymptotic stability of the object and the convergence of its parameters to the model parameters are ensured, provided the input vector is sufficiently informative. The construction of …

Robotic Air Hockey Table, William Forcey, Andrew Piunno, Kaden Carpenter, Xander Zavatchen

Williams Honors College, Honors Research Projects

Air hockey, a popular arcade game, is traditionally designed for two players. This limits the game’s accessibility for individuals who wish to practice or enjoy it as a single player. To solve this problem, a robotic system was implemented to play air hockey against a human player. The speed and acceleration of the puck and mallet were measured from a game played between humans to inform the required movement capabilities of the robot. The robotic opponent implemented observes the location of the puck on the table using a camera and predicts where it will be in the future. A Cartesian …

Formalizing Asymmetric Control-Telemetry Separation In Distributed Industrial Control Systems, Andrew Manison

College of Graduate Studies: Theses & Dissertations

Distributed industrial control systems often place control and telemetry traffic on the same communication substrate even though the two workloads impose different requirements. Control paths need bounded request-response latency and predictable acknowledgement semantics, whereas telemetry paths benefit from scalable publish-subscribe fanout and tolerance for consumer-side delay. This thesis argues that, for the tested class of mixed workloads on shared commodity infrastructure, these communication roles should be separated architecturally rather than forced through a single protocol. To evaluate that claim, the thesis formalizes an asymmetric control- telemetry pattern and instantiates it in the Asymtra framework using gRPC for synchronous control and …

Brrbox, Shawn J. Myers, Lane Cline, Michael Davis, Christian Secrest

Williams Honors College, Honors Research Projects

This report details the project known as “The BRRBOX”, a reusable, insulated thermoelectric cooler developed to keep internal temperatures at refrigeration levels or cooler for at least 48 hours. The cooler will track its internal temperature during this period and be able to give the data at the end of its delivery cycle to keep up with food and pharmaceutical standards during delivery. The BRRBOX uses Peltier-based cooling alongside vacuum insulation panels and fans to achieve efficient thermal control. An onboard microcontroller will monitor temperature, record the data, and adjust the cooling output to minimize power consumption. The box will …

End-To-End Development And Experimental Validation Of A 1/10-Scale Autonomous Vehicle, Rikkin Pankaj Panchal

Electrical Engineering Theses

Autonomous vehicle development demands vast resources, making scaled down platforms a critical alternative for solving core algorithmic challenges. The primary contribution of this thesis is the end to end development and validation of a complete real time autonomous driving pipeline deployed on a one tenth scale vehicle. To streamline platform development, an AI assisted annotation framework automates dataset generation, significantly reducing manual labor while improving training data quality. The system perception stack features a reinforcement learning guided online multi camera calibration framework that enables adaptive surround view stitching without the need for offline recalibration. This is paired with robust lane …

Multi-Level Energy Optimization For Connected And Automated Vehicles: From Cooperative Multi-Vehicle Control To Individual Powertrain Management, Pruthwiraj Santhosh

Dissertations, Master's Theses and Master's Reports

The transportation sector currently accounts for nearly 30% of global energy consumption, necessitating urgent advancements in vehicle efficiency to meet Net Zero targets. Leveraging connectivity and automation, this dissertation proposes and validates methodologies to reduce the energy consumption of light-duty vehicles at both fleet and individual levels.

First, a validation framework is developed to bridge the “simulation-to-real world” gap in Cooperative Automated Vehicle (CAV) research. Moving beyond virtual simulations, the study establishes a methodology for physically validating centralized control architectures via a custom Cellular V2X network. By synchronizing vehicle-powertrain models with physical test vehicles, the framework successfully orchestrates complex arterial …

Empirical Analysis Of Machine Learning Models For Predicting Equipment Failures Using Iot Sensor Data, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

This article examines the problem of detecting and predicting industrial equipment faults using IoT sensor data through machine learning techniques. Sensor readings such as temperature, vibration, pressure, voltage, and current, as well as FFT-based features, were statistically analyzed. Class imbalance and low signal informativeness were identified as key factors limiting model accuracy. Results obtained from Logistic Regression, Random Forest, and XGBoost models were comparatively evaluated, showing that when ROC-AUC values remain around 0.5, distinguishing fault and non-fault states becomes challenging. Correlation and feature-importance analyses confirmed the absence of strong dominant indicators. The findings highlight the need to improve sensor architecture …

Hallucination Techniques For Self-Supervised Synthetic Datasets For Mobile Robots, Wyatt D. Colburn

Master's Theses

Classical techniques in autonomous navigation struggle in tightly constrained spaces. Machine learning has been shown to perform better in these difficult environments but most techniques require large amounts of navigation experience for training. Using a new machine learning paradigm learning from hallucination (LfH), training data can be collected in a safe environment and not require supervision. Data is collected in real time while an agent performs a random walk in free space, supervision is not required as there are no obstacles for the robot to run into. After a random walk a post processing pipeline will hallucinate a safety corridor …

Analysis Of A Cloud-Based Robot Motion Planning System, Yusif Mardanzade, Latafat Abbas Gardashova

Chemical Technology, Control and Management

As a result of the integration of cloud computing technologies into the field of robotics, the concept of "cloud robotics" has emerged. Unlike traditional robots, cloud-based robot systems remove computation, memory, and even some software from the local device and rely on remote resources obtained over the network. This approach ensures that robots are not limited only by their internal computing capabilities and allows them to take advantage of the wide range of opportunities offered by the cloud infrastructure. As a result, robots have access to large databases, highly parallel computing, and collective learning capabilities anytime and anywhere. In addition, …

Csc36000 - Modern Distributed Computing Assignment, Saptarashmi Bandyopadhyay

Open Educational Resources

This assignment covers standard performance metrics for Distributed Systems and the basics of Multiprocessing for CSC36000 - Modern Distributed Computing at the City College of New York CUNY. It is an interactive coding assignment intended to be executed in a Python notebook.

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Evaluation Of Deep Learning Techniques In Road Sign Recognition, Latafat Abbas Gardashova, Haji Fakhraddin Hajiyev

Chemical Technology, Control and Management

Deep learning has transformed the computer vision field and greatly improved the performance and efficiency of road sign recognition systems. This research compares different deep learning methods, such as Convolutional Neural Networks (CNNs), Recurrent Neural Networks (RNNs), and hybrid models, in terms of their ability to effectively detect and classify road signs under various conditions. The study compares performance measures such as accuracy, processing speed, and robustness to environmental conditions like low lighting, occlusion, and adverse weather. The results show that CNN-based methods, especially those with transfer learning and ensemble techniques, have better performance in real-time scenarios. Problems like computational …

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …

Orbital Maneuvers And Interplanetary Trajectory Design Via Reinforcement Learning, Roberto Cuéllar Rangel

Doctoral Dissertations and Master's Theses

This dissertation investigates the application of reinforcement learning (RL) to the design and optimization of low-thrust spacecraft trajectories, with an emphasis on autonomy, adaptability, and robustness in the presence of system uncertainties and unmodeled perturbations. Classical approaches to low-thrust trajectory design are predominantly grounded in optimal control theory, which relies on the availability of precise dynamical models and often requires problem-specific reformulation and solver tuning. While optimal control methods offer high accuracy under deterministic conditions, their sensitivity to stochastic disturbances and computational limitations in highly nonlinear or uncertain environments pose significant challenges for future autonomous space missions.

To address these …

Human Comfort Modeling, Measurement, And Improvement In Human–Robot Collaboration, Yuchen Yan

All Dissertations

A dissertation is proposed to explore human comfort in human-robot collaboration (HRC) through modeling, prediction, and enhancement methodologies. Human comfort is a crucial yet underexplored factor in HRC, directly influencing task efficiency, trust, and overall collaboration effectiveness. Understanding the influential factors, developing computational models, and refining methods to improve human comfort in HRC are essential steps toward advancing the field of collaborative robotics. To address these challenges, multiple studies have been conducted. A series of experimental studies were performed to investigate how robot motion-based parameters affect human comfort in HRC. These studies examined both analytical comfort modeling approaches and physiological …