Controls and Control Theory Commons^™

Evaluation Of General Voronoi Diagram Decomposition For Harmonic Fields In Navigation Of Dynamic Environments, Franco Abullarade

Master's Theses

Harmonic potential fields provide provably minimum-free navigation, but any change to the workspace geometry invalidates the field and forces a costly global recomputation, typically restricting them to static environments. This thesis extends the harmonic map framework of Vlantis et al., which maps the free workspace onto a unit disk and uses an atlas of per-region transformations, to dynamic indoor settings. First, we replace their manually annotated room partition with an automatic decomposition based on the Generalized Voronoi Diagram, allowing the atlas to be built from an arbitrary occupancy grid in an automated way. Second, we introduce a localized repair procedure …

System Integration And Validation Of The Cal Poly Spacecraft Attitude Dynamics Simulator Mk. Iv, Bricen S. Rigby

Master's Theses

The Cal Poly Spacecraft Attitude Dynamics Simulator (SADS) is an ongoing project that seeks to enable the simulation and validation of sensors, actuators, and control logic related to spacecraft attitude control. The SADS platform rests atop a spher- ical air-bearing device which allows for nearly frictionless rotation in all three axes. The orientation of the platform is controlled by four reaction wheels arranged in a pyramidal configuration. Over the past few years, there have been significant updates to the reaction wheel subsystem, as well as requests for a more capable central com- puter. Therefore, a new system architecture for the …

Integration Of Robotic Arm And Conveyor With Programmable Logic Controller, Drake A. Small

Master's Theses

To meet new curriculum demands brought on by Cal Poly's upcoming switch to semesters, a new, cross-disciplinary lab module was developed for EE 435 (Industrial Power Control and Automation). The module emphasizes career-applicable skills, preparing students for the field of controls engineering within the manufacturing industry. These skills include robotic control, computer networking and configuration, and embedded systems. The work focused on integrating a collaborative robot arm to pick-and-place boxes on a conveyor. A myCobot 320 Pi and an Ultimation Powered Roller MDR Conveyor were integrated with the existing PLC system using Modbus RTU and EtherNet/IP communication protocols, respectively. A …

A Comparative Study Of Model Predictive Control And The Stanley Method For Vehicle Path Tracking Applications, Noah S. Fitzgerald

Master's Theses

This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single and double lane change maneuvers. Following simulation-based evaluation, both controllers were implemented on hardware within a perception-driven steering-control pipeline. This pipeline utilized recorded sensor data from the MXcarkit 1/8^th-scale autonomous vehicle platform, incorporating lane instance segmentation and homography-based roadway estimation.

Under idealized simulation conditions, the MPC demonstrated improved trajectory-tracking performance during aggressive maneuvers while requiring greater steering activity and computational effort …

Analysis And Design Of A 2-Bit Millimeter-Wave Reconfigurable Intelligent Surface And Investigation Of Fss-Assisted Angular Stability, Max Spalek

Master's Theses

Millimeter-Wave (mm-wave) technology utilizes high frequency spectrum and can deliver multi-gigabit speeds, ultra-low latency, and massive bandwidth capacity. However, this technology is rather new and many technical challenges remain. On the other hand, Reconfigurable Intelligent Surfaces (RIS) have emerged as promising structures for controllable electromagnetic wavefront manipulation in wireless communication systems. This thesis presents the design of a 2-bit RIS unit-cell element operating throughout the 30–34 GHz mm-wave band, where the structure was progressively refined from an initial resonating geometry toward a grounded reflective RIS configuration. The proposed structure utilizes PIN-diode switching states to produce four discrete reflected phase states …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Custom Animatronic Puppet, Jake Schuman, Fredy Herrarte, Madison Reedy, Jackson Reynolds

Mechanical Engineering

This project involved the design, fabrication, and implementation of a custom audio-animatronic puppet modeled after Dr. Brian Davis for the California Polytechnic State University Mechanical Engineering Department. The objective was to create an expressive, lifelike character capable of synchronized speech, head movement, arm gestures, and seated-to-standing motion while demonstrating the integration of mechanical design, controls, manufacturing, and artistic fabrication.

The final system consists of an 18-degree-of-freedom animatronic platform utilizing servo-driven facial and upper-body actuation combined with a pneumatic standing mechanism. A modular aluminum and 3D-printed structural framework was developed using SolidWorks and validated through engineering analysis. Character shells were digitally …

Mass - Modular Acoustic Suppression System, Julia Megargle, Michael A. Milner, Lucas Kaemmererer, Jonathan Corvera, Gabriel Choi, Emmi Cayer

Mechanical Engineering

The Modular Acoustic Suppression System (MASS) is a mass tuned damper that reverberates a membrane atop a cavity to absorb select acoustic frequencies produced by the Environmental Control and Life Support Systems (ECLSS) within NASA's Artemis Human Lander. The height of the reverberation chamber is adjusted to mitigate a range of varying tonal frequencies within the human lander.

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Elevate Grill, Brady Alexander

Electrical Engineering

The Elevate Grill Senior Project is a Santa Maria style grill with an electrical lifting/lowering mechanism and temperature sensor feedback. The grill allows for a dynamically controlled cooking surface, able to be automatically set or manually set by the user. The grill’s user interface informs the user about the temperature in different zones on the grill and alerts the user when the target temperature is hit. Additionally, the user can program preset temperature ranges and apply them to the grill’s control system. The system incorporates safe failure modes in the event of a power outage and also allows the user …

Solving Linearly Constrained Quadratic Programs Using Field Programmable Analog Arrays, Tyler Wynn, Alonzo Arroyo

Electrical Engineering

This paper presents a field-programmable analog array (FPAA) implementation for solving linearly constrained quadratic programs (LCQPs) directly in the analog domain. The solver is based on a continuous-time primal-dual control architecture with integral action, anti-windup compensation, and a piecewise-linear nonlinearity for enforcing affine inequality constraints. A switched-capacitor implementation using three AN231E04 FPAAs is developed, and coefficient scaling methods are introduced to keep internal and output signals within the voltage limits of the hardware. A global scaling factor is used to reduce internal signal excursions, while solution-space scaling is shown to modify the implemented optimization coefficients and alter the local closed-loop …

Uav Trio Formations For Aerial Pest Deterrence With Vision-Based Bird Monitoring, Benjamin Andrew Ly, Chris Kwon, Christian Joseph Macaranas

Electrical Engineering

No abstract provided.

Hallucination Techniques For Self-Supervised Synthetic Datasets For Mobile Robots, Wyatt D. Colburn

Master's Theses

Classical techniques in autonomous navigation struggle in tightly constrained spaces. Machine learning has been shown to perform better in these difficult environments but most techniques require large amounts of navigation experience for training. Using a new machine learning paradigm learning from hallucination (LfH), training data can be collected in a safe environment and not require supervision. Data is collected in real time while an agent performs a random walk in free space, supervision is not required as there are no obstacles for the robot to run into. After a random walk a post processing pipeline will hallucinate a safety corridor …

Nonlinear Integral Control Schemes For A Cadence-Heartrate Process: A Matlab Exploration, Alexander G. Elliott

Master's Theses

Keeping one’s heart-rate within a specific range during a cardiovascular workout can be difficult due to many factors including variations in the exercise environment and changes in energy level. One’s heart-rate can be controlled by tuning the intensity level of the activity over time. This study focuses on the relationship between a runner’s cadence and their heart-rate and explores ways to control the heart-rate by adjusting the cadence. Previous work in this area modeled the cadence-heartrate plant as a first-order linear system, but this has been shown to be insufficient. This work improves upon previous research in this area by …

Analog Hardware Implementation Of A Linearly Constrained Quadratic Program Real-Time Solver, Claire E. Tylutki, Claire Tylutki

Master's Theses

This thesis presents the design, implementation, and analysis of a hardware system for solving Linearly Constrained Quadratic Programs (LCQPs) in real time. The architecture follows a generalized feedback structure composed of three key elements: gradient descent on the quadratic cost function, saturation-based nonlinearity to enforce inequality constraints, and an integral controller with an anti-windup mechanism to regulate dynamic behavior and determine steady-state error. This majority analog system converges with equilibria that satisfy the Karush-Kuhn-Tucker (KKT) optimality conditions. Using a representative LCQP, this work presents simulation of the circuit in PLECS and LT Spice to confirm the feasibility of the novel …

Mesh-Networked Uav Swarm: Experimental Leader-Follower Formation Control, Toma Grundler, Jack Ryan

Electrical Engineering

In recent years, unmanned aerial vehicles (UAVs) have demonstrated significant potential for multi-agent coordination applications, yet reliable formation control algorithms remain challenging to implement in real-world environments. This report presents the design, simulation, and hardware implementation of four leader-follower formation control strategies for UAV swarms. The implemented algorithms include a semi-rigid PI controller based on forward and lateral distance error, a hybrid PID controller utilizing mixed error signals with velocity and position feedback, a simplified velocity-based PID controller operating on individual coordinate components, and a GPS offset controller with direct positional control. MATLAB simulation validated controller performance in four different …

Framework For Multi-Agent Coordination And Distributed Localization In Micro-Uavs, Minwoo Park, Nikolas Tambornini

Electrical Engineering

Micro-UAVs (unmanned aerial vehicles) due to their inexpensive nature and compact form factor have shown an increase in prevalence throughout a multitude of applications including, but not limited to: search and rescue, military reconnaissance, and agriculture monitoring. However, for a majority of these high impact applications, a swarm of micro-UAVs are required and furthermore mandate that they are able to cooperatively and autonomously coordinate with each other. For long, controlling and communicating between a user and a singular micro-UAV has been a well known and solved problem, however the same can't be said for swarms of micro-UAVs. This project seeks …

Leader-Follower Platooning With Turtlebot3: A Low-Cost Ros Test-Bed Using Vision-Lidar Fusion, Patrick Kelly Crandall, Kalon Ma Bienz

Electrical Engineering

This report presents the design, implementation, and indoor validation of a two-robot leader–follower platoon built on low-cost Turtlebot3 platforms. Each robot runs ROS Noetic on an on-board Raspberry Pi 4, fusing a fisheye camera for HSV-based lane detection with an LDS-02 LiDAR for clustering-based leader identification. A dual-loop architecture (PD steering for lateral control and PID for longitudinal gap regulation) maintains a 0.40m headway and keeps the follower centered within +/- 5 cm of the lane midline, without any inter-vehicle communication or external localization. Track experiments at speeds up to 0.18m/s achieved mean gap error of +/- 3 cm and …

Hydropower Collegiate Competition, Aiden D. Foster, Devon Bountry, Joanna Vo, Timothy Rinker, Amanda Rodriguez, Minh Nguyen, Eli Haushalter, Sophie Watkinson, Maiya Holton, Breanne Evans

Mechanical Engineering

The Cal Poly SLO HCC team presents a feasibility study and engineering design review package for retrofitting the non-powered Ritschard Dam in Colorado into a hydroelectric facility as part of the 2025 Hydropower Collegiate Competition. Through a rigorous and multi-staged assessment of plausible dam sites in the western US, the team has chosen the Ritschard Dam in Colorado to implement an electromechanical component designed to accommodate a large range of flowrates stemming from a large variance in upper reservoir capacity due to geographical and climate effects. The team evaluated non-powered dams based on technical feasibility, electric grid proximity, power generation …

A Turtlebot3 Hardware Testbed For Distributed Kalman Filter Localization, Dmitri Dobrynin, Indigo T. Garcia

Electrical Engineering

This report presents the preliminary design for a distributed localization framework for a multi-robot system. Many robotics research papers provide simulations of proposed algorithms in regards to formation control and task allocation. However, it is often that these proposals are without hardware experiments, being limited only to simulation. The objective of this framework is to provide a hardware implementation of a distributed Kalman filtering algorithm for multi-agent localization, as well as provide grounds for future multi-agent experiments. The framework is implemented on a swarm of three Turtlebot3 mobile robots. The robots can accurately localize themselves with respect to other agents …

Distributed Formation Control Of Nonholonomic Mobile Robots: Safety-Critical Leader-Follower Approach With Obstacle Avoidance And Dynamic Reconfiguration, Kelvin C. Villago

Master's Theses

Networked control systems for multi-agent robotics have emerged as a critical paradigm for executing complex coordinated tasks in diverse environments. While formation control serves as the backbone of such systems, real-world deployment introduces significant challenges including communication constraints, environmental obstacles, and the need for adaptive reconfiguration. This research addresses these challenges by developing a novel unified framework that seamlessly integrates obstacle avoidance algorithms with dynamic formation reconfiguration capabilities, specifically designed for communication-limited networked control architectures. The proposed framework represents a significant advancement over existing approaches by simultaneously handling both static and dynamic obstacles while maintaining system cohesion under communication constraints. …

Dc To Ac Voltage Source Converter Control System, Mohummad Tark Elgassier, Jordan M. Reichhardt, Brayden Richard Young

Electrical Engineering

The Voltage Source Converter Control System integrates a control system for a 2-phase half-bridge voltage source converter (VSC) utilizing a TMS320F2837xD Dual-Core Real-Time Microcontroller. VSCs are critical for the integration of power production into the power grid. They allow for accurate control over DC-AC energy conversion. Additionally with the improvement of renewable energies VSCs play a critical role in controlling the flow of these environmentally controlled and more unpredictable sources of energy. The control system regulates the output current and voltage, regulates switching patterns, and maintains power stability under varying loads. Within the control system Digital control systems, PWM generation, …

Hypoxic Incubator: Improving Robustness/Reliability And Demonstrating Physiological Efficacy, Damon Dennis Tan

Master's Theses

The Microphysiological Systems Laboratory aims to develop colorectal cancer tumor models under a hypoxic environment to assess model response to pharmaceutical compounds in vitro. To perform relevant studies, researchers have attempted to use different hypoxic inducing strategies such as a nitrogen pod and hypoxic incubator to recreate in vivo physiological responses to hypoxia. However, studies would be interrupted due to incubator functionality failure. To ensure successful and physiologically relevant studies, I improved and verified the robustness and reliability of a hypoxic incubator previously designed and manufactured in the lab. Through the testing and iterating design processes, I engineered and implemented …

Measurement Automation & Measurement System Research Endowment, Brian Bivinetto, Beneda Loya, Shiron Bendrihem

College of Engineering Summer Undergraduate Research Program

Road travel safety is always the most important issue in transportation systems. In general, several factors cause road accidents, such as human error, vehicle mechanical failure, roadway limitations (e.g. pavement, lane geometry, etc.), and inclement weather conditions. The major focus of today’s transportation developments is related to making highway transportation safer, smarter, and greener to enhance livability. Many accidents are caused when drivers lack a better understanding of the surrounding traffic conditions because the driver not only needs to control his/her vehicle but also needs to be aware of the movements of the vehicles around him/her. A driver cannot be …

Distributed Multi-Robot Localization And Coordination Framework For Mobile Robots, Dmitri Dobrynin, Indigo T. Garcia

College of Engineering Summer Undergraduate Research Program

This project aims to develop an experimental framework for multiple mobile robots, both in simulation and real-world hardware, using ROS 2 as the primary operating system. Utilizing TurtleBot 3 platforms, the team will establish a robust setup that enables tasks such as distributed localization, autonomous navigation, path planning, and formation control for mobile robots. Leveraging simulation environments like Gazebo, the project will replicate real-world setups in a simulated environment for testing and development. All tasks, communication, and sensor integration will be implemented using ROS 2, ensuring seamless coordination and interoperability among the robots. The project involves integrating various sensors and …

Power Controller For Insulated Solar Electric Cooker, Ryan Koshy, Justin Tae-Hoon Kim

Electrical Engineering

Insulated Solar Electric Cookers, or ISECookers, are devices created to aid those in impoverished regions improve safety, sustainability, and quality of life regarding their cooking practices. ISECookers present an alternative to traditional biofuel/biomass energy sources and provide a closed-loop, self-sustaining system that can be used in a variety of environments. These devices present solutions to widespread issues such as pollution, deforestation, and hazardous emissions as a result of traditional cooking in developing regions around the world. A notable obstacle of these devices is power delivery. Given the varying conditions experienced by a solar panel (inclement weather, irradiance irregularities, etc.), it …

Providing Cadence Feedback In Real-Time To Guide Cardiovascular Workouts, Levi O. Rash

Master's Theses

Cardiovascular workouts offer numerous health benefits, yet beginners often find it challenging to initiate them. Existing wearable technologies, although providing valuable feedback such as heart rate zones, often disrupt the workout flow and distract users due to the need for interaction with the wearable display. In response, we propose an alternative feedback mechanism: cadence, measured in steps per minute. This feedback mechanism uses multiplicative control to produce the correct cadence for the user’s target heart rate (HR). To model the HR and cadence relationship, a first-order system was used. The prototype implementation of this system was completed in Arduino, using …

Harmonic Flow Modeling And Analysis Of A Green Hybrid Ac/Dc Seaport Power System, Krishan Kaushal Ram, Taufik, Helen Yu, Siddharth Vyas

Master's Theses

This thesis aims to design and develop a model for a proposed Green Seaport power system and perform harmonic analysis. The model was developed using MATLAB Simulink and tests were performed by dividing the system into several Battery Energy Storage System (BESS) operating modes such as simultaneous charging and discharging, simultaneous charging, and simultaneous discharging. For each mode, BESS state of charge and other factors such as solar irradiance for the PV system, load levels and power factor were varied to observe the impact on system’s voltage Total Harmonic Distortion (THD) level and current Total Demand Distortion (TDD). 62 separate …

Optimal False Data Injection (Fdi) In Simulated Cooperative Adaptive Cruise Control (Cacc) Systems, Lovro Dukic

Master's Theses

In the rapidly advancing field of autonomous vehicles, ensuring the security and reliability of self-driving systems is crucial. Autonomous vehicle systems, such as cooperative adaptive cruise control (CACC), must undergo significant research and testing before their integration into commercial intelligent transportation systems. CACC considers multiple vehicles in close proximity as a single entity, or platoon, with each vehicle equipped with a controller that uses sensor-based measurements and vehicle-to-vehicle (V2V) communication to control inter-vehicle spacing. While this system offers numerous potential benefits for traffic safety and efficiency, it is also susceptible to False Data Injection (FDI) attacks, which can cause the …

Modeling A Hydropower Plant Powerhouse Based On Hebgen Dam, James Savella, Paul De La Cruz

Electrical Engineering

The United States Department of Energy (DOE) Water Power Technologies Office (WPTO) invited California Polytechnic State University (Cal Poly) to participate in the 2024 Hydropower Collegiate Competition (HCC) to research and design ways to convert non-powered dams (NPDs) to hydropower plants to contribute to a clean energy future. The Cal Poly HCC Electrical Engineering team used information gathered for the competition to create a simulated hydropower plant model of Hebgen Dam, in Montana, using a salient pole synchronous generator and a PID governor for an Electrical Engineering Senior Project. The simulated hydropower plant model allows a user to control the …