Controls and Control Theory Commons^™

Insect Inspired Behavioral Strategies For Improving Multi-Agent System Resilience In The Presence Of Contagious Faults, James E. Hand

Doctoral Dissertations and Master's Theses

As Multi-Agent Systems (MASs) become increasingly involved in every aspect of everyday life the need to maintain reliability and resilience within these systems grows. However, in equal measure bad actors wishing to maliciously control or alter these systems are growing in both scale and capability. Thus, there is a present need for control schemes and agent behaviors that provide security against these threats while also avoiding large degradation in system performance as a tradeoff. Current research has covered a wide breadth of avenues and strategies that provide measurable resilience to faulted agents. However, these strategies often require group consensus, specialized …

Safe Real-Time Obstacle Detection And Navigation Using Cbf–Clf And Cbf–Pid Control, Nicolas M. Hernandez

McKelvey School of Engineering Graduate Student Theses & Dissertations

Traditional robotic navigation pipelines typically follow a three stage architecture: obstacle detection, path planning, and low-level control for trajectory tracking. While effective in static environments, these methods often introduce latency and lack formal guarantees of safety in dynamic or unplanned for scenarios. Our work addresses these limitations by developing a real-time controller grounded in Control Barrier Functions (CBFs) and Control Lyapunov Functions (CLFs), unified through a Quadratic Program (QP). We first investigate a hybrid CBF-PID-QP controller on a 1/10 scale car, where the CBF serves as a real-time safety filter, modifying the PID output to prevent constraint violations. While this …

Human Comfort Modeling, Measurement, And Improvement In Human–Robot Collaboration, Yuchen Yan

All Dissertations

A dissertation is proposed to explore human comfort in human-robot collaboration (HRC) through modeling, prediction, and enhancement methodologies. Human comfort is a crucial yet underexplored factor in HRC, directly influencing task efficiency, trust, and overall collaboration effectiveness. Understanding the influential factors, developing computational models, and refining methods to improve human comfort in HRC are essential steps toward advancing the field of collaborative robotics. To address these challenges, multiple studies have been conducted. A series of experimental studies were performed to investigate how robot motion-based parameters affect human comfort in HRC. These studies examined both analytical comfort modeling approaches and physiological …

A Turtlebot3 Hardware Testbed For Distributed Kalman Filter Localization, Dmitri Dobrynin, Indigo T. Garcia

Electrical Engineering

This report presents the preliminary design for a distributed localization framework for a multi-robot system. Many robotics research papers provide simulations of proposed algorithms in regards to formation control and task allocation. However, it is often that these proposals are without hardware experiments, being limited only to simulation. The objective of this framework is to provide a hardware implementation of a distributed Kalman filtering algorithm for multi-agent localization, as well as provide grounds for future multi-agent experiments. The framework is implemented on a swarm of three Turtlebot3 mobile robots. The robots can accurately localize themselves with respect to other agents …

Distributed Formation Control Of Nonholonomic Mobile Robots: Safety-Critical Leader-Follower Approach With Obstacle Avoidance And Dynamic Reconfiguration, Kelvin C. Villago

Master's Theses

Networked control systems for multi-agent robotics have emerged as a critical paradigm for executing complex coordinated tasks in diverse environments. While formation control serves as the backbone of such systems, real-world deployment introduces significant challenges including communication constraints, environmental obstacles, and the need for adaptive reconfiguration. This research addresses these challenges by developing a novel unified framework that seamlessly integrates obstacle avoidance algorithms with dynamic formation reconfiguration capabilities, specifically designed for communication-limited networked control architectures. The proposed framework represents a significant advancement over existing approaches by simultaneously handling both static and dynamic obstacles while maintaining system cohesion under communication constraints. …

Transfer Learning For Temporal Logic Objectives, Lucas M. Santana Rovira

McKelvey School of Engineering Graduate Student Theses & Dissertations

Reinforcement learning algorithms can enable autonomous systems to learn the control skills needed to accomplish a task specified by a linear temporal logic formula. However, they cannot be transferred to a new task, even when the two are very similar. For each new task, the policy must be redesigned from scratch, which is a common limitation of existing reinforcement learning methods for temporal logic tasks. A proposed solution to this problem leverages the similarity between past and new tasks to reuse already learned control skills to accomplish the new task, with minimal or no retraining.

Rather than learning a single …

Advances Towards A Robotic Management Vehicle Suited To Nurse Row Crops To More Efficient Outcomes, Adam Mk Gronewold

Dartmouth College Ph.D Dissertations

Enhancing agricultural production while reducing input costs remains a central challenge in modern row-crop management. Recent advances in computation, imagery, and sensors are enabling more efficient practices across various agricultural domains, and automation technologies are increasingly available to manage tasks central to perennial crop development. Automation in row-crop agriculture, by contrast, lags behind. This thesis explores utilizing small, unmanned ground vehicles to transform row cropping through the implementation of unconventional, in-season management strategies. The first focus of this work considers improvements to nitrogen fertilization using small, autonomous vehicles. An agronomy experiment in corn assessed the effects of gradually applying nitrogen …

3d Perception, Mapping, And Navigation For Mobile Cobot, Tuan T. Dang

Computer Science and Engineering Dissertations - Archive

Service robots are migrating from tightly controlled factory lines into offices, hospitals, and homes, where they must perceive, remember, and act amid people, clutter, and perpetual change. Humans solve this daily by forming compact, task-relevant “cognitive maps”: we sample just enough sensory detail to guide the moment, stitch those snapshots into a sparse topological scaffold, and continuously refine it as we move. Guided by that insight, this dissertation proposes a biologically inspired mapping framework that turns partial RGB-D observations into a hybrid temporal-spatial memory—locally metric for centimeter-scale navigation yet globally topological for room-to-building navigation. The system first distills raw depth …

Distributed Multi-Robot Localization And Coordination Framework For Mobile Robots, Dmitri Dobrynin, Indigo T. Garcia

College of Engineering Summer Undergraduate Research Program

This project aims to develop an experimental framework for multiple mobile robots, both in simulation and real-world hardware, using ROS 2 as the primary operating system. Utilizing TurtleBot 3 platforms, the team will establish a robust setup that enables tasks such as distributed localization, autonomous navigation, path planning, and formation control for mobile robots. Leveraging simulation environments like Gazebo, the project will replicate real-world setups in a simulated environment for testing and development. All tasks, communication, and sensor integration will be implemented using ROS 2, ensuring seamless coordination and interoperability among the robots. The project involves integrating various sensors and …

Reinforcement Learning For Optimal Kicking Actions In Humanoid Robotics: Advancing Robotic Autonomy And Versatility, Suresh Dodda, Sathish Kumar Chintala, Sukender Reddy Mallreddy, Sharath Chandra Macha, Yashwanth Vasa, Sapan Bharadwaj Bonala, Navin Kamuni, Sujatha Alla

Engineering Management & Systems Engineering Faculty Publications

Acquiring the necessary skills to perform a work effectively and efficiently requires a significant investment of time and computing power. Previous applications of Reinforcement Learning (RL) for action optimization in humanoid robotics have shown how promising this technology is for moving robotics towards true autonomy and versatility. Therefore, this study offers the first use of RL to create an entirely optimal kicking action for the Alderbaran Nao robot. Kicking motions that were steady, precise, quick, and able to kick farther than any existing RoboCup squad were generated by optimizing for a multi-objective reward function. We demonstrate that the ideal kicking …

On Uncertainty For Ill-Posed Robot Decision Problems, Jared Joseph Beard

Graduate Theses, Dissertations, and Problem Reports (ETD)

As robots adopt more real world responsibilities, they will be expected to solve more complicated problems. In some cases limited prior knowledge will result in unmodelled environmental conditions; in others, multiple users may have competing perspectives on how to frame a decision problem. Many existing frameworks, namely Markov decision processes (MDP) presuppose users have identified a specific problem with models sufficient to solve or learn a problem. If we wish to extend MDPs to novel problems or those heavily dependent on user feedback, autonomous decision makers must be able to identify limitations in how a given problem is framed and …

Implementation Of Static Rfid Landmarks In Slam For Planogram Compliance, Brennan L. Drake

Honors College Theses

Autonomous robotic systems are becoming increasingly prevalent in everyday life and exhibit robust solutions in a wide range of applications. They face many obstacles with the foremost of which being SLAM, or Simultaneous Localization and Mapping, that encompasses both creation of the map of an unknown environment and localization of the robot in said environment. In this experiment, researchers propose the use of RFID tags in a semi-dynamic commercial environment to provide concrete landmarks for localization and mapping in pursuit of increased locational certainty. With this obtained, the ultimate goal of the research is to construct a robotics platform for …

Chatgpt As Metamorphosis Designer For The Future Of Artificial Intelligence (Ai): A Conceptual Investigation, Amarjit Kumar Singh (Library Assistant), Dr. Pankaj Mathur (Deputy Librarian)

Library Philosophy and Practice (e-journal)

Abstract

Purpose: The purpose of this research paper is to explore ChatGPT’s potential as an innovative designer tool for the future development of artificial intelligence. Specifically, this conceptual investigation aims to analyze ChatGPT’s capabilities as a tool for designing and developing near about human intelligent systems for futuristic used and developed in the field of Artificial Intelligence (AI). Also with the helps of this paper, researchers are analyzed the strengths and weaknesses of ChatGPT as a tool, and identify possible areas for improvement in its development and implementation. This investigation focused on the various features and functions of ChatGPT that …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Learning Robot Motion From Creative Human Demonstration, Charles C. Dietzel

Theses and Dissertations

This thesis presents a learning from demonstration framework that enables a robot to learn and perform creative motions from human demonstrations in real-time. In order to satisfy all of the functional requirements for the framework, the developed technique is comprised of two modular components, which integrate together to provide the desired functionality. The first component, called Dancing from Demonstration (DfD), is a kinesthetic learning from demonstration technique. This technique is capable of playing back newly learned motions in real-time, as well as combining multiple learned motions together in a configurable way, either to reduce trajectory error or to generate entirely …

Collaborative Human-Machine Interfaces For Mobile Manipulators., Shamsudeen Olawale Abubakar

Electronic Theses and Dissertations

The use of mobile manipulators in service industries as both agents in physical Human Robot Interaction (pHRI) and for social interactions has been on the increase in recent times due to necessities like compensating for workforce shortages and enabling safer and more efficient operations amongst other reasons. Collaborative robots, or co-bots, are robots that are developed for use with human interaction through direct contact or close proximity in a shared space with the human users. The work presented in this dissertation focuses on the design, implementation and analysis of components for the next-generation collaborative human machine interfaces (CHMI) needed for …

A Study Of Deep Reinforcement Learning In Autonomous Racing Using Deepracer Car, Mukesh Ghimire

Honors Theses

Reinforcement learning is thought to be a promising branch of machine learning that has the potential to help us develop an Artificial General Intelligence (AGI) machine. Among the machine learning algorithms, primarily, supervised, semi supervised, unsupervised and reinforcement learning, reinforcement learning is different in a sense that it explores the environment without prior knowledge, and determines the optimal action. This study attempts to understand the concept behind reinforcement learning, the mathematics behind it and see it in action by deploying the trained model in Amazon's DeepRacer car. DeepRacer, a 1/18^th scaled autonomous car, is the agent which is trained …

Distance-Based Formation Control Using Decentralized Sensing With Infrared Photodiodes, Steven Williams

LSU Master's Theses

This study presents an onboard sensor system for determining the relative positions of mobile robots, which is used in decentralized distance-based formation controllers for multi-agent systems. This sensor system uses infrared photodiodes and LEDs; its effective use requires coordination between the emitting and detecting robots. A technique is introduced for calculating the relative positions based on photodiode readings, and an automated calibration system is designed for future maintenance. By measuring the relative positions of their neighbors, each robot is capable of running an onboard formation controller, which is independent of both a centralized controller and a global positioning-like system (e.g., …

Advanced Mechatronics, Hao Su

Open Educational Resources

Project-based course on the design of mechatronic devices to address needs identified by hospital-based clinicians and industry. Students work in teams to develop a mechatronic prototype. The lectures will cover the design of medical devices and robotics including sensors, actuators, and robots. The students will communicate with customers to understand design needs, then conduct study on prior art, intellectual property, due diligence, and idea conceptualization. Students will present ideas in class and to a broad audience from local industry. Students will also write a publication-quality final report, which they will be encouraged for publication submission.

Engineering Design I, Hao Su

Open Educational Resources

Introduction to robotics

Decentralized, Noncooperative Multirobot Path Planning With Sample-Basedplanners, William Le

Master's Theses

In this thesis, the viability of decentralized, noncooperative multi-robot path planning algorithms is tested. Three algorithms based on the Batch Informed Trees (BIT*) algorithm are presented. The first of these algorithms combines Optimal Reciprocal Collision Avoidance (ORCA) with BIT*. The second of these algorithms uses BIT* to create a path which the robots then follow using an artificial potential field (APF) method. The final algorithm is a version of BIT* that supports replanning. While none of these algorithms take advantage of sharing information between the robots, the algorithms are able to guide the robots to their desired goals, with the …

A Comparative Analysis Of Reinforcement Learning Applied To Task-Space Reaching With A Robotic Manipulator With And Without Gravity Compensation, Jonathan Fugal

Theses and Dissertations--Electrical and Computer Engineering

Advances in computing power in recent years have facilitated developments in autonomous robotic systems. These robotic systems can be used in prosthetic limbs, wearhouse packaging and sorting, assembly line production, as well as many other applications. Designing these autonomous systems typically requires robotic system and world models (for classical control based strategies) or time consuming and computationally expensive training (for learning based strategies). Often these requirements are difficult to fulfill. There are ways to combine classical control and learning based strategies that can mitigate both requirements. One of these ways is to use a gravity compensated torque control with reinforcement …

A Low-Cost Experimental Testbed For Multi-Agent System Coordination Control, Victor Fernandez-Kim

LSU Master's Theses

A multi-agent system can be defined as a coordinated network of mobile, physical agents that execute complex tasks beyond their individual capabilities. Observations of biological multi-agent systems in nature reveal that these ``super-organisms” accomplish large scale tasks by leveraging the inherent advantages of a coordinated group. With this in mind, such systems have the potential to positively impact a wide variety of engineering applications (e.g. surveillance, self-driving cars, and mobile sensor networks). The current state of research in the area of multi-agent systems is quickly evolving from the theoretical development of coordination control algorithms and their computer simulations to experimental …

Ros-Enabled Framework For A Miniature Hexapod As A Mobile Robot Research Platform, Joseph Michael Kloeppel

Electrical and Computer Engineering ETDs

The purpose of this thesis is to investigate and develop a framework for connected six-legged robots which can be used as a Robotic Operating System (ROS) based research platform. The research presented aims to purvey the necessary engineering and scientific steps needed to evolve a consumer-grade connected toy into a fully functioning and highly capable robotic system. Such a platform can be used to simulate and implement novel biologically inspired swarm research. Crawling robots have the advantage of being able to scale terrains which wheeled mobile robots may not and possess many interesting characteristics. The miniROaCH, miniature ROS-enabled and Crawling …

Machine Learning Through Mimicry And Association, Nickolas S. Holcomb

Honors College Theses

Adaptability is a key missing features that has impeded the growth of assistive robotics. In the traditional model, all actions must be explicitly coded by a skilled programmer familiar with the hardware. This project explores a method of teaching a webcam equipped arm type robot new primitive movement using visual demonstrations.

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Caddy: A 2005 Roborodentia Entry With Vision And Path Planning Abilities, Taylor Braun-Jones

Computer Engineering

Roborodentia is an autonomous robotics competition held each year during Cal Poly’s Open House. For the 2005 competition, robot entries needed to navigate a maze searching for three randomly placed golf balls, collect them, and then deposit the balls in the “nest” at the end of the maze. A newly added aspect for the 2005 competition included two bonus balls that were placed on a platform behind the wall in two predetermined corners of the maze.

Caddy is a robot that was entered into the 2005 Roborodentia competition. Caddy included a vision system that allowed searching for balls down untraveled …

A Study Of A Novel Modular Variable Geometry Frame Arranged As A Robotic Surface, Christopher James Salisbury

UNLV Theses, Dissertations, Professional Papers, and Capstones

The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary constraints. Each module is connected by a passive six-bar mechanism that mimics the constraints of a spherical joint at each triangle intersection. A three dimensional inkjet printer is used to create a six-module prototype designed around surplus stepper motors powered by an old computer power supply as a proof-of-concept example.

The finite element method is applied to …

Fuzzy Logic Control Of An Inverted Pendulum Robot, Kyle Reid

Electrical Engineering

The inverted pendulum is a classical problem in controls.  The inherit instabilities in the setup make it a natural target for a control system.  Over the years it has been the benchmark for testing new and innovative control theories such as Fuzzy Logic.  During the course of this project a software fuzzy logic controller was implemented using a PIC microcontroller.  At the conclusion of the experiment an interesting realization was made about the nature of Fuzzy Logic and its applicability in the world of controls.

Multiple Robot Boundary Tracking With Phase And Workload Balancing, Michael Jay Boardman

Master's Theses

This thesis discusses the use of a cooperative multiple robot system as applied to distributed tracking and sampling of a boundary edge. Within this system the boundary edge is partitioned into subsegments, each allocated to a particular robot such that workload is balanced across the robots. Also, to minimize the time between sampling local areas of the boundary edge, it is desirable to minimize the difference between each robot’s progression (i.e. phase) along its allocated sub segment of the edge. The paper introduces a new distributed controller that handles both workload and phase balancing. Simulation results are used to illustrate …