Controls and Control Theory Commons^™

Pulse-Width Modulation Spray System Performance And Development Of A Novel System To Optimize Spray Use Efficacy, Prashanta Pokharel

Theses and Dissertations--Biosystems and Agricultural Engineering

The overarching objective of this research was to enhance our understanding of pulse width modulation (PWM) based nozzle control system and develop an intelligent nozzle control system for agricultural spray applications. This dissertation focused on measuring and analyzing the transient nozzle pressure characteristics and performance under PWM control. Additionally, it explored the development of an innovative multi-degree-of-freedom (DOF) nozzle control system for precise chemical applications in specialty crop systems.

The pressure dynamics of a PWM system were studied by developing an instrumentation system capable of operating a solenoid valve and recording pressure signals. A nozzle body and two manifolds of …

Dynamic Modeling And Control Of A Solid State Semiconductor-Based Transformer, Microgrid And Storage Systems, Rubén Darío Viñán-Velasco

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Smart Grids are power grid models designed with the idea of including the growing new technologies, from generation to storage devices, and are a response to the growing demands from consumers and the presence of electronic components being commonplace in the modern devices. The design requires a dynamic alternative in order to build an independent grid that can also work in cooperation with other micro-grids and the power grid in an integrated way. Smart-grids present several advantages over the traditional power grid scheme, but the economic costs of the components required to implement smart-grids is currently a great limitation. This …

External Runtime Execution Monitoring Of A Cyber Physical System Via Trace Interfaces, Peter Vaughan Truslow

Theses and Dissertations

In the past two decades, Unmanned Aerial Systems have progressed from expensive military hardware or one-off custom builds, to include off-the-shelf drones that can be purchased for a rather affordable price and flown by nearly anyone. As the technology and performance have improved, the door is opened to applications that require operation in environments where the consequences for failure are high, such as operating in the navigable airspace or in urban environments, or with human passengers. This requires a great deal of trust in the reliability and integrity of the control systems of the aircraft. A method of monitoring the …

Implementing Associative Learning Using Neuromorphic Robot, Vinay Kumar Pillalamarri

Dissertations, Master's Theses and Master's Reports

Associative learning, a key cognitive process seen across the animal kingdom, enables organisms to form connections between stimuli and adapt their behaviors based on past experiences. A particularly powerful example is fear conditioning, where animals learn to associate a neutral stimulus with an aversive one, allowing them to predict and avoid potential threats. Inspired by this mechanism, this project implements associative learning on an unmanned ground vehicle (UGV) to develop adaptive behavior through neuromorphic principles. Utilizing Nengo for neural modeling, the UGV learns to associate visual (red color) and tactile (vibration) stimuli through Hebbian learning, a biologically inspired synaptic adaptation …

Autonomous Basketball Court Creation Robot, Bryce Haldeman, Tyler Gray, Dalon Vura

Williams Honors College, Honors Research Projects

The Autonomous Basketball Court Outlining System presents a comprehensive solution for precision court marking. Powered by a 24V lithium-ion battery and driven by a single ST microcontroller, the system autonomously marks the outline of a half basketball court using predefined algorithms. User-friendly features include easy loading of marking material, actuated by gravity or a small servo motor depending on material of choice, ensuring intuitive operation. Safety is prioritized, with the servo motor eliminating high-pressure concerns, and the system maintains a controlled speed accounting for user well-being. Two step and direction servo motors enable accurate linear displacement, facilitating straight lines, and …

Data Driven And Machine Learning Based Modeling And Predictive Control Of Combustion At Reactivity Controlled Compression Ignition Engines, Behrouz Khoshbakht Irdmousa

Dissertations, Master's Theses and Master's Reports

Reactivity Controlled Compression Ignition (RCCI) engines operates has capacity to provide higher thermal efficiency, lower particular matter (PM), and lower oxides of nitrogen (NOx) emissions compared to conventional diesel combustion (CDC) operation. Achieving these benefits is difficult since real-time optimal control of RCCI engines is challenging during transient operation. To overcome these challenges, data-driven machine learning based control-oriented models are developed in this study. These models are developed based on Linear Parameter-Varying (LPV) modeling approach and input-output based Kernelized Canonical Correlation Analysis (KCCA) approach. The developed dynamic models are used to predict combustion timing (CA50), indicated mean effective pressure (IMEP), …

Modeling Of Inverter-Based Resources For Hardware In The Loop Testing Of Protection And Control Schemes, Md Aamir Rahmani

Dissertations, Master's Theses and Master's Reports

High penetration of inverter-based resources (IBR) may cause the misoperation of protective relays due to the dynamic nature of fault currents fed by the IBR during short-circuit faults. Misoperation may cause damage to power system equipment and affect the reliability of the power system. This dissertation presents an in-depth investigation into the modeling of IBR in the context of transmission line fault scenarios to understand and analyze the characteristics of fault currents fed by the IBR. The research objectives encompass the development of reliable IBR models capable of accurately replicating fault current behaviors, designing IBR operation control schemes, and implementing …

Comparison Of Dc Motor Speed Calculation Efficiency Between Inductive Proximity Sensor And Rotary Encoder, Dino Dwi Aryanto, S. Sukir

Elinvo (Electronics, Informatics, and Vocational Education)

This study examines the level of effectiveness and efficiency of a sensor on the calculation of the rotational speed (RPM) of a DC motor, considering that the calculation of the rotational speed of an electric motor, both AC motors and DC motors, greatly influences the output of the system. the speed of motor rotation is very influential in several fields, such as power generation, which will affect the output voltage that will be generated. There are many methods for measuring the rotational speed of a motor, including using an inductive proximity sensor and a rotary encoder combined with a PLC …

Improvement Of Calorimetric Quality Analyzers For Substances, Makhfuza Azimovna Radjabova

Chemical Technology, Control and Management

It is noted that the development of intelligent means of measuring qualitative indices is of topical importance. Since the quality of many substances is determined by optical methods, an algorithm for spectrophotometric data processing has been developed, which consists of primary data processing (stage I) and determination of qualitative indices of liquid products (stage II). Since the task of numerical determination of colour characteristics of transmittance coefficients of liquid samples is incorrectly set, it is recommended to use regularization methods of A.N.Tikhonov to improve metrological characteristics of the device. On the basis of regularization methods for solving incorrect problems, algorithms …

Smart System For Wheat Diseases Early Detection, Rustam Baratov, Himola Sunnatillayeva, Almardon Mamatovich Mustafoqulov

Chemical Technology, Control and Management

This paper presents a smart system for early detection of wheat plant diseases in the vegetation period. The proposed smart system allows detecting three types of wheat diseases, particularly yellow rust, powdery mildew and septoria at early stage and significantly improves the soil and ecology by locally spraying harmful chemicals just to sickness plants. The proposed diagnostic program is created in the C++ programming language. The basic structure of the smart system consists of Raspberry PI 4 MODULE, Logitech HD Pro Webcam C920, buzzer, HC-SR04 distance sensor, DC motor driver, AC motor, power supply, relay and some digital devices.

Algorithms For Synthesis Of Adaptive Control Systems With A Customized Model Using The Speed Gradient Method, Jasur Sevinov, Oxunjon Boborayimov

Chemical Technology, Control and Management

Algorithms are considered for the synthesis of adaptive control systems with a customized model based on the speed gradient method. For the synthesis of adaptive control systems, the identification approach is based on obtaining estimates of the unknown parameters in the object. By calculating the speed gradient, identification algorithms with an explicit and implicit customized model were obtained as well as that in sliding modes. A joint solution is given to the interrelated problems of identifying parameters with insufficient current information. The position of an object is about assessing the state with insufficient a priori information about its parameters. This …

Life Cycle Management Of A Technological Complex For Separating Multicomponent Mixtures Under Conditions Of Uncertainty Of Parameters, Yusuf Shodievich Avazov

Chemical Technology, Control and Management

The issue of control the lifecycle of technological complexes of multicomponent mixtures is considered, taking into account the uncertainty of parameters. Among uncertainties such as parameter uncertainty, model uncertainty, choice uncertainty under variability, spatial variability uncertainty, temporal variability uncertainty, inter-site variability uncertainty, more attention is paid to input parameter uncertainty and action uncertainty. The rectification technology is schematically presented, the influence of parameter uncertainty on the technological functions of the rectification complex. The scheme analyzes the control and assessment of “uncertainty” to repeat the lifecycle of the rectification complex and make changes to the components of the rectification complex technology. …

Mathematical Models And Calculation Of Parameters Of Optoelectronic Angular Displacement Converters, Yuriy Gennadyevich Shipulin, Azimjon Khusanov

Chemical Technology, Control and Management

The article discusses promising optoelectronic converters (OP) for wide application of angular movements. A methodology and diagram for calculating OP with the transverse movement of a moving element is presented; in order to simplify the calculation, the weight range of angular movements is conventionally divided into three sub ranges. A graph is given of the dependence of the area of the photosensitive surface of a photo resistor made from a single crystal of high-resistivity p-type silicon.

Intelligent Decision Support System, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

The article studies issues related to the development of intelligent systems located in an environment capable of perceiving this environment and acting autonomously to achieve assigned tasks. To create an intelligent process control system, it is necessary to monitor the mode to ensure high quality of finished products with minimal energy consumption at a given productivity of the entire complex. It is important to have a flow of input data to provide the system with operational information to support decision making.

The proposed intelligent control system makes it possible to analyze the results of production activities to make organizational and …

The Use Of Ultraviolet Radiation As A Means Of Destroying Microorganisms In Cherries, Jasur Safarov, Shaxnoza Sultanova, Pulatov M. Murodjon

Chemical Technology, Control and Management

The article discusses methods for extending the shelf life of cherries, having previously treated it with an ultraviolet ray. The article also presents the results obtained, which prove that the shelf life of cherries exposed to ultraviolet increases. At the same time, the article describes in detail the processing technique and presents the results of research.

Study Of Dynamic Characteristics Of The Mechanical Circuit Of The Developed Induction Inertial Vibration Transducer, Sulton Fayzullayevich Amirov, Asror Abdunabiyevich Shoimkulov

Chemical Technology, Control and Management

The article examines the dynamic characteristics of the mechanical circuit of the developed induction vibration transducer. It is found that in the investigated transducers forced oscillations occur with the frequency of the input disturbing force, the amplitude of forced oscillations does not depend on the initial conditions and time, and in forced oscillations with damping there is always a shift of the oscillation phase compared to the phase of the input disturbing force. It is shown that the induction vibration transducer reproduces the measured vibrations with small distortions only in a relatively narrow frequency region at frequencies of the input …

Improvements Of The Control System For The Technological Process Of Drying Bulk Materials, Azizbek Nodirbekovich, Dilmurod Ikromovich

Chemical Technology, Control and Management

The issues of convective drying of bulk materials as objects of monitoring, control and advanced management are presented based on the results of simulation modeling of a complex heat and mass transfer process, taking into account the drying kinetics. As a result of the work of a number of them, in the last few decades neat hypotheses were formed about moisture migration in and around dried materials, which led to the creation of accurate mathematical models of drying behavior, with successfully applied in a wide range of fields. The reasons for this are the dynamics of processes in the drying …

Application Of Quantum Algorithms In The Synthesis Of Dynamic Objects, Noilakhon Yakubova

Chemical Technology, Control and Management

Around the world, the food industry is focusing on achieving energy and resource efficiency. One of the main challenges in the field of process automation is the creation of effective control systems using intelligent technologies to improve the quality of processes and achieve the production of high-quality products with less energy and resources. Therefore, it is necessary to work with a large amount of data. Particular attention is paid to the development of computational algorithms for automated high-speed computational analysis systems for processing this data at high speed. Therefore, the article discusses the use of quantum computing methods in controlling …

System For Advanced Control Of Thermal Parameters Of Glass Furnaces, O'Tkir Xolmanov

Chemical Technology, Control and Management

The results of an analysis of the functioning of glass furnaces for melting semi-white or discolored glass as an object of automatic control and management are presented. Through experimental research, a parametric control scheme for a glass melting furnace was formed and a system for improved control of thermal glass melting processes was synthesized. The proposed system regulates the parameters of a furnace with a horseshoe-shaped flame development. Based on commercially produced instruments and automation equipment that ensure stabilization of thermal conditions of glass melting. The burner block control algorithm provides control over the performance of the gas burner, safety …

Control Of Fully-Actuated Aerial Manipulators And Omni-Directional Multirotors, Riley M. Mccarthy

Mechanical Engineering ETDs

This thesis details the system modeling, design, control, simulation, construction, and
testing of both a fully-actuated and omni-directional multirotor aerial system created
for the primary purpose of performing active tasks with their environment. This work
verifies the capabilities of both systems through empirical testing, and demonstrates
how through the use of new control methods and physical designs multirotors can
expand their purpose from passive inspection based tasks to active contact based
tasks. These systems take advantage of newly implemented control allocation features present in the PX4 flight control software, version 1.14. The use of which makes designing controllers for such …

Adaptive Traction, Power And Torque Control Strategies And Optimization In An All-Electric Powertrain, Aymane Hidara

Theses and Dissertations

Electric and hybrid-electric vehicles lean heavily on intricate control algorithms to provide smooth, reliable, and secure operations under any driving conditions. Three distinct supervisory control strategies have been developed, each aiming to improve reliability and vehicle performance of a dual-motor electric vehicle equipped with an all-wheel-drive, fully electric powertrain. These algorithms are adept at dynamically modulating and constraining the torque provided to the wheels, leveraging two autonomous permanent magnet electric drive units. This study utilizes a vehicle model jointly provided by MathWorks and General Motors in partnership with industry sponsors. The these strategies were implemented in the model and enhanced …

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Cyber-Threat Detection Strategies Governed By An Observer And A Neural-Network For An Autonomous Electric Vehicle, Douglas Scruggs

All Theses

A pathway to prevalence for autonomous electrified transportation is reliant upon accurate and reliable information in the vehicle’s sensor data. This thesis provides insight as to the effective cyber-attack placements on an autonomous electric vehicle’s lateral stability control system (LSCS). Here, Data Integrity Attacks, Replay Attacks, and Denial-of-Service attacks are placed on the sensor data describing the vehicle’s actual yaw-rate and sideslip angle. In this study, there are three different forms of detection methods. These detection methods utilize a residual metric that incorporate sensor data, a state-space observer, and a Neural-Network. The vehicle at hand is a four-motor drive autonomous …

Safe Navigation Of Quadruped Robots Using Density Functions, Andrew Zheng

All Theses

Safe navigation of mission-critical systems is of utmost importance in many modern autonomous applications. Over the past decades, the approach to the problem has consisted of using probabilistic methods, such as sample-based planners, to generate feasible, safe solutions to the navigation problem. However, these methods use iterative safety checks to guarantee the safety of the system, which can become quite complex. The navigation problem can also be solved in feedback form using potential field methods. Navigation function, a class of potential field methods, is an analytical control design to give almost everywhere convergence properties, but under certain topological constraints and …

Adaptive Personalized Drug Delivery Method For Warfarin And Anemia Management: Modeling And Control., Affan Affan

Electronic Theses and Dissertations

Personalized precision medicine aims to develop the appropriate treatments for suitable patients at the right time to obtain optimal results. Personalized medicine is challenging due to inter- and intra-patient variability, narrow therapeutic window, the effect of other medications, comorbidity (more than one disease at a time), nonlinear patient dynamics, and time-varying patient dose response characteristics which include bleeding (internal and external). This research aims to develop a framework for an adaptive personalized modeling and control method with minimum clinical patient specific dose response data for optimal drug dosing. The proposed methodology is applied to anemia and warfarin management. It is …

Resonance Damping Of Lcl Filters Using Capacitor-Current Proportional-Integral Positive Feedback Method For Grid-Integrated Fuel Cell System, Majid Hosseinpour, Amin Kholousi

Emirates Journal for Engineering Research

Nowadays, the use of grid-integrated inverter proton exchange membrane fuel cell (PEMFC) systems is becoming more prevalent due to their efficiency and favorable environmental effects. Switching the grid-connected inverters causes high-frequency harmonics, which are eliminated using LCL filters. These filters are susceptible to instability when their resonant frequency is affected by changes in network impedance. Active damping methods are used to weaken the resonance of LCL filters. However, the grid-connected inverter is prone to be unstable under grid impedance variations due to the negative equivalent resistance resulting by digital control delays. As a solution to this problem, the capacitor-current proportional-integral …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

Ambient Air Emission Profiles Of Polycyclic Aromatic Hydrocarbons Around A Typical University Power House In Nigeria, Oyetunji Okedere

Tanzania Journal of Engineering and Technology (TJET)

The level of electricity generation in Nigeria is presently grossly inadequate. Consequently, the productive sectors of the economy do not presently enjoy an uninterrupted supply of electrical energy from the country’s national grid and the downtime is in most cases too much. Using diesel-fueled electric power generators has become an attractive alternative to meet the shortfall in the energy supply gap. In this study, the levels of polycyclic aromatic hydrocarbons in the vicinity of the diesel-fueled electric power generators operated by Osun State University, Osogbo, Nigeria were investigated with a view to ascertain the priority levels and carcinogenic PAHs. Since …

Optimal And Robust Control Problems Of Microalgae Cultivation, Mariana Rodriguez-Jara, Luis A. Ricardez-Sandoval, Carlos E. Ramirez-Castelan, Hector Puebla

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Fast Fourier Transform Analytical Expression Of Estimation Of Nosinusoidality Indicators, Ilkhomjon Khakimovich Siddikov, Zailobiddin Urazali O’G’Li Boixanov

Chemical Technology, Control and Management

This in the article asynchronous motor is reactive power control to do and manage for from the transformer used. The main element of the current transformer is the measuring instrument, i.e. the sensitive element. Depending on the number of asynchronous motor stator blades, the measurement sensitive element is placed between the main winding and the rotor as a two-ring or three-ring. Measurement accuracy, reliability, and sensitivity increase compared to an independent measuring device. The measuring element loops are independent or connected in series . When the measurement loops are connected in series, the amount of output voltage is …