Controls and Control Theory Commons^™

Electric-Powered Wheelchairs As An Assistive Technology, Aidan O'Dwyer, Malabika Basu, Eugene Coyle

Conference papers

This paper briefly outlines recent work done, particularly in control systems, for electric powered wheelchairs. These mobility aids, first developed in the 1950’s [1], were improved with the incorporation of microprocessors. The requirement for mobility aids in general is rising; for example, it is reckoned that 1.5% of the U.K. population require such aids. As an assistive technology, electric powered wheelchairs have many benefits. Nevertheless, a reliable and robust such wheelchair has still to evolve.

Towards A Metric For The Assessment Of Safety Critical Control Systems, Oscar R. Gonzalez, Jorge R. Chavez-Fuentes, W. Steven Gray

Electrical & Computer Engineering Faculty Publications

There is a need for better integration of the fault tolerant and the control designs for safety critical systems such as aircraft. The dependability of current designs is assessed primarily with measures of the interconnection of fault tolerant components: the reliability function and the mean time to failure. These measures do not directly take into account the interaction of the fault tolerant components with the dynamics of the aircraft. In this paper, a first step to better integrate these designs is made. It is based on the observation that unstable systems are intrinsically unreliable and that a necessary condition for …

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

The Target Complex loop TC-1 was originally conceived as part of an accelerator-driven system (ADS) pilot plant that was designed and developed by the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization (EDO) “Gidropress” in Obninsk, Russia, under the International Science and Technology Center Project #559 in 1998. It was to be used as the target in a 1 MWth ADS experiment run off of the LANSCE proton accelerator at Los Alamos National Laboratory (LANL). When the U.S. transmutation program changed priorities from accelerator-driven systems towards nuclear fission reactors, the TC-1 loop was brought to UNLV …

Guidelines For Deploying Wireless Sensor Network In Manufacturing: Star Topology Study Using The Rssi To Test The Network Performance, A. Hameed Madwar

Dissertations and Theses @ UNI

Wireless Sensor Networks (WSNs) are varying in kinds and can be used for many purposes. It can be extensively used in monitoring, reporting, and decision routines. Therefore, WSNs are very important to integrate with manufacturing since they can help not only in monitoring and decision making but also they can increase productivity and decrease the wiring costs. However, WSNs are facing some challenges in manufacturing as they need to resist the interferences that could be generated by the electrical and mechanical fields created during the manufacturing processes. Some of these interferences could be due to the high temperatures, blocks of …

Practical Sensor For Measurement Of Nitrogen, Dusan Popovic, Vladimir Milosavljevic, Steven Daniels

Articles

This paper presents a method for precise measurement of atomic and molecular nitrogen in an oxygen-nitrogen dc plasma. This is achieved by monitoring the intensities of the atomic nitrogen spectral line at 821.6 nm and the molecular nitrogen bandhead at 337.1 nm, relative to the atomic oxygen spectral line at 844.7 nm. Oxygen is one of the most frequently used gases for surface chemical treatment, including deposition and etching, therefore the ability to measure and control the process and chemical composition of the process is essential. To validate this oxygen actimometry method for N2-xO2 (where x varies from 0 to …

Derivation And Application Of A Conserved Orbital Energy For The Inverted Pendulum Bipedal Walking Model, Jerry E. Pratt, Sergey V. Drakunov

Publications

We present an analysis of a point mass, point foot, planar inverted pendulum model for bipedal walking. Using this model, we derive expressions for a conserved quantity, the “Orbital Energy”, given a smooth Center of Mass trajectory. Given a closed form Center of Mass Trajectory, the equation for the Orbital Energy is a closed form expression except for an integral term, which we show to be the first moment of area under the Center of Mass path. Hence, given a Center of Mass trajectory, it is straightforward and computationally simple to compute phase portraits for the system. In fact, for …

Sampled-Data Kalman Filtering And Multiple Model Adaptive Estimation For Infinite-Dimensional Continuous-Time Systems, Scott A. Sallberg

Theses and Dissertations

Kalman filtering and multiple model adaptive estimation (MMAE) methods have been applied by researchers in several engineering disciplines to a multitude of problems featuring a linear (or mildly nonlinear) model based on finite-dimensional differential (or difference) equations perturbed by random inputs. However, many real-world systems are more naturally modeled using an infinite-dimensional continuous-time linear systems model, such as those most naturally modeled as partial differential equations or time-delayed differential equations along with a possibly infinite-dimensional measurement model. The Kalman filtering technique was extended to encompass infinite-dimensional continuous-time systems with sampled-data measurements and a technique to approximate an infinite-dimensional continuous-time system …

Stochastic Estimation And Control Of Queues Within A Computer Network, Nathan C. Stuckey

Theses and Dissertations

An extended Kalman filter is used to estimate size and packet arrival rate of network queues. These estimates are used by a LQG steady state linear perturbation PI controller to regulate queue size within a computer network. This paper presents the derivation of the transient queue behavior for a system with Poisson traffic and exponential service times. This result is then validated for ideal traffic using a network simulated in OPNET. A more complex OPNET model is then used to test the adequacy of the transient queue size model when non-Poisson traffic is combined. The extended Kalman filter theory is …

Development Of The Analytical Design Method For Single Stage Phase Lead And Phase Lag Compensators, Aidan O'Dwyer

Conference papers

The design of phase lead and phase lag compensators in the frequency domain, using the Bode diagram, is a commonly used method of designing control systems and is taught in many undergraduate and postgraduate courses in control engineering. The graphical trial and error procedure used may be replaced by an analytical procedure. However, the analytical approach tends to be formulated as a “black-box” approach in textbooks, without engineering insight. This paper presents the full development of the analytical design procedure. The instructional approach has been successfully used by the author over the past two academic years.

Using Controller Tuning Formulae To Improve Performance, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this device, it is necessary to adjust the controller parameters according to the nature of the process. Thus, for effective control of a HVDC system, for example, specific values need to be chosen for the P, I and D parameters, which will be different for the values required to control, for example, an induction motor drive. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller …

Experiences With Virtual Learning Environments In Control Engineering Education, Aidan O'Dwyer

Conference papers

The twin pressures of the need for students to learn a wider variety of concepts, ideally in a self-learning mode, and the reduction in class contact time has led to the use of increased levels of information technology in control engineering education. This paper reports on, reflects on, and evaluates the author’s use of virtual laboratories (computer based laboratories available on the internet) in control engineering modules at DIT Kevin St. The use of the virtual laboratories helps in the ongoing evolution of the teaching approach from a traditional didactic lecture and laboratory course to a more learner-centred approach. The …

Stability Analysis And Control Synthesis Of Affine Fuzzy Systems, Ruiyao Gao, Aidan O'Dwyer

Conference papers

This paper presents an approach to stability analysis and control synthesis of affine fuzzy systems. The analysis is based on quadratic Lyapunov functions. The approach considers the nonlinear offset terms in affine fuzzy systems as non-vanishing perturbations added to the corresponding nominal linear blending systems. The affine fuzzy system is bounded by an ultimate limit if the corresponding linear blending system is exponentially stable. A state feedback controller with an extra term is designed with guaranteed global stability. The ultimate bounds are determined for both the open loop system and the compensated system.

Identification Of A Time-Delayed Process Model Using An Overparameterisation Method, John Roe, Ruiyao Gao, Aidan O'Dwyer

Conference papers

An extensive literature exists on the estimation of the model parameters of time-delayed processes. This paper briefly reviews the main overparameterisation methods for the Single-Input, Single Output (SISO) and Multi-Input, Multi-Output (MIMO) model parameter (and time delay) estimation problem. Subsequently, two algorithms, and their modifications, are discussed, and their performances are assessed in simulation. Results indicate that both the algorithms can suitably identify the model parameters, including the time delay. The third author has taught the method successfully to students taking advanced level control courses at DIT for a number of years; these experiences will be briefly reported. The paper …

Some Aspects Of Process Control In Semiconductor Manufacturing, Keelin Relihan, Shane Geraghty, Aidan O'Dwyer

Conference papers

This paper outlines some aspects of process control in semiconductor manufacturing. Starting with an outline of the semiconductor manufacturing process, the contribution will discuss temperature control of the chemical vapour deposition stage and the control of the wafer etching process, based on the industrial experience of the first two authors. Subsequently, the authors draw the attention of the semiconductor manufacturing community to the potential of properly tuned PID controllers for the achievement of simple and high performance control solutions.

Hazardous Emissions Monitoring And Control, Aidan O'Dwyer, Jesus Cabello

Conference papers

There is an increasing awareness in society of the need to protect our fragile environment. Meeting environmental requirements is recognised as one of the six 21st century business drivers for automatic control. Chemical companies, for example, use automatic control to minimise waste production because of increasing prohibitions against discharge and/or disposal of toxic substances. New plants are moving towards a “zero-discharge” concept [1]. In a recent report [2], greater emphasis on automatic control is suggested as a technological response of both the speciality chemicals and pharmaceutical sub-sectors to key business drivers up to 2015. This contribution reports on recent developments …

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

In 1998, the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization “Gidropress” in Russia, began the design and construction of a prototype lead-bismuth eutectic (LBE) accelerator target, the Target Complex 1 (TC-1), under the International Science and Technology Center (ISTC) project #559 (“Pilot Flow Lead-Bismuth Target of 1 MW Power for Accelerator Driven Systems”) in support of the international efforts to develop accelerator-driven spallation systems for nuclear transmutation and other applications.

During the thermal and engineering test of the TC-1 in 2005 at UNLV, it was observed that the existing control algorithm led to a very …

A Fuzzy Logic Controller For Autonomous Wheeled Vehicles, Mohamed Trabia, Linda Z. Shi, Neil Eugene Hodge

Mechanical Engineering Faculty Research

Autonomous vehicles have potential applications in many fields, such as replacing humans in hazardous environments, conducting military missions, and performing routine tasks for industry. Driving ground vehicles is an area where human performance has proven to be reliable. Drivers typically respond quickly to sudden changes in their environment. While other control techniques may be used to control a vehicle, fuzzy logic has certain advantages in this area; one of them is its ability to incorporate human knowledge and experience, via language, into relationships among the given quantities. Fuzzy logic controllers for autonomous vehicles have been successfully applied to address various …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Mobius: An Omnidirectional Robotic Platform And Software Architecture For Network Teleoperation, Samuel Aaron Miller

Electrical & Computer Engineering Theses & Dissertations

The following thesis presents the results of a project to develop and test an omnidirectional robotic system (hardware and software) at NASA Langley Research Center's Robotics and Intelligent Machines Lab. The impetus for the project was the unique capabilities of omnidirectional systems. Some of the many potential benefits these systems have include improved material-handling capabilities in constrained environments (such as might be found in extraterrestrial manned habitats), efficient camera-based vehicle teleoperation, and simplified route planning for autonomous robot operations.

The project's focus was to design, build, and test a system that used Mecanum wheels to achieve omnidirectional motion. In addition …

Controlled Braking Scheme For A Wheeled Walking Aid, Eugene Coyle, Aidan O'Dwyer, Eileen Young, Kevin Sullivan, A. Toner

Conference papers

A wheeled walking aid with an embedded controlled braking system is described. The frame of the prototype is based on combining features of standard available wheeled walking aids. A braking scheme has been designed using hydraulic disc brakes to facilitate accurate and sensitive controlled stopping of the walker by the user, and if called upon, by automatic action. Braking force is modulated via a linear actuating stepping motor. A microcontroller is used for control of both stepper movement and for supervisory control. An encoder is used to supervise walker movement in terms of time, distance and speed.

Experiences Of Learning And Teaching On A Taught Masters Course In Engineering: From A Didactic Approach To A More Student Centered Learning Approach, Aidan O'Dwyer

Conference papers

This paper reports on, reflects on, and evaluates the author’s experiences of teaching the Advanced Control module on the Masters degree in Advanced Engineering at Dublin Institute of Technology (DIT) over the past four academic years. The teaching approach has evolved from a traditional didactic lecture and laboratory course, with associated assessments, in the first academic year, to the implementation of a more learner-centred approach over the past two academic years. This new approach has been made possible by the appropriate use of real case studies, information technology tools, and web-based virtual laboratories. Assessment methodology has also evolved. In the …

An Approach To Teaching Pid Controller Tuning, Aidan O'Dwyer

Conference papers

This paper discusses an approach to the teaching of PID controller tuning methods to students in control engineering at Dublin Institute of Technology. The method involves analytically calculating the gain margin, phase margin and maximum sensitivity for PI and PID controlled systems whose process is modelled in first order lag plus time delay (FOLPD) form. Students can examine the performance of many tuning rules from graphical results, allowing insight to be developed as to the most rational choice of the tuning rule for the application. Some preliminary work done to develop an expert system to allow a greater automation of …

A Case Study In Modeling And Process Control: The Control Of A Pilot Scale Heating And Ventilation System, Robin Mooney, Aidan O'Dwyer

Conference papers

This paper details the control of a pilot scale laboratory heating and ventilation system. The system is represented in 2x2 multi-input, multi-output (MIMO) form. A process reaction curve identification technique was used to model (in first order lag plus delay - FOLPD - form) the flow process and temperature process portions of the system, over a range of operating conditions. Tests revealed that both processes were continuously non-linear. A gain scheduler with static decoupling was designed, using look-up tables, to continuously interpolate for the most suitable proportional-integral (PI) or proportional-integral-derivative (PID) controller settings and decoupler gains. The contribution of this …

Pi And Pid Controller Tuning Rules: An Overview And Personal Perspective, Aidan O'Dwyer

Conference papers

The ability of PI and PID controllers to compensate many practical processes has led to their wide acceptance in industrial applications. The requirement to choose two or three controller parameters is most easily done using tuning rules. Starting with a general discussion of industrial practice, the paper provides a survey of additional tuning rules for continuous-time PI and PID control of time-delayed single-input, single-output (SISO) processes, to those explored in a recent book by the author.

Enhancing Waste Management Through Automatic Control, Aidan O'Dwyer

Conference papers

Meeting environmental requirements is recognised as one of the six 21st century business drivers for automatic control. The proportional integral (PI) and proportional integral derivative (PID) controllers are the most dominant form of automatic controllers in industrial use today. With these techniques, it is necessary to adjust the controller parameters according to the nature of the process. Thus, for effective control of a heating, cooling and air-conditioning (HVAC) application, for example, specific values need to be chosen for the P, I and D parameters, which will be different for the values required to control, for example, a distillation column. This …

Reducing Energy Costs By Optimizing Controller Tuning, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this technique, it is necessary to adjust the controller parameters according to the nature of the process. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller tuning, based on process information). Such tuning rules allow the easy set up of controllers to achieve optimum performance at commissioning. Importantly, they allow ease of re-commissioning if the characteristics of the process change. The paper outlines the results …

Latency Compensation Control Of Computer Based Control Systems, Aidan O'Dwyer

Conference papers

This paper discusses the use of a modified Smith predictor for latency (i.e. time delay) compensation, to assist in the implementation of network computer based control systems. Such systems typically have a variable time delay associated with the transfer of information; the modified Smith predictor is robust to time delay variations.

Performance Improvement Using Simple Pid Controller Tuning Formulae, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this technique, it is necessary to adjust the controller parameters according to the nature of the process. Thus, for effective control of a HVDC system, for example, specific values need to be chosen for the P, I and D parameters, which will be different for the values required to control, for example, an induction motor drive. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller …

Synthesising Life-Sciences And Control Engineering: An Outline Survey And A Practical Example, Aidan O'Dwyer

Conference papers

There is an increasing interest in life science related areas in the electrical and control engineering community [1]. One manifestation of this interest is the development of interdisciplinary programmes, such as the B.Sc. in Medical Physics and Bioengineering, offered by the Dublin Institute of Technology from September 2005. A significant amount of research work in control engineering has focused on aspects of human physiological system, for example blood glucose regulation [2], cardiovascular modelling and control [3], and limb control [4]. There is an increasing emphasis on interdisciplinary research; in recognition of this, the Institute of Electrical Engineers (IEE) has starting …

Nonlinear Regression Methods For Estimation, Eric B. Nelson

Theses and Dissertations

Regression techniques are developed for batch estimation and applied to three specific areas, namely, ballistic trajectory launch point estimation, adaptive flight control, and radio-frequency target triangulation. Specifically, linear regression with an intercept is considered in detail. An augmentation formulation is developed. Extensions of theory are applied to nonlinear regression as well. The intercept parameter estimate within the linear regression is used to identify the effects of trim change that are associated with the occurrence of a control surface failure. These estimates are used to adjust the inner loop control gains via a feed-forward command, hence providing an automatic reconfigurable retrim …