Civil and Environmental Engineering Commons^™

Optimal Site Layout Planning For Construction Projects Over Waterways, Rana M. Azzam, Nashwa Mohamed Yossef Prof, Adel I. Eldosouky Prof

Journal of Engineering Research

Construction site layout planning is an important part of a project's success. An effective construction layout plan can enhance the performance of the construction process by improving productivity, ensuring safety, and reducing costs. Given the importance of bridges over a waterway and the lack of interest in previous research for planning a construction site over a waterway. This paper concentrates on the problems of site planning for such projects, including the problem of limited site space. The study indicated that constructing an offshore terminal is one of the primary requirements for projects with limited space being carried out on a …

Influence Of Concrete Jacketing On The Performance Of Steel Columns Under Blast Induced Progressive Collapse, Hanan Eltobgy Prof., Mohamed Saeed Refaey Dr., Mohamed Ahmed Aboshok Dr., Ahmed Emadel-Din Abdel-Aal Eng.

Journal of Engineering Research

This study investigates the influence of concrete jacketing on the performance of steel columns subjected to blast loading, which can lead to progressive collapse. Using Finite Element Method (FEM) simulations, the research evaluates concrete-encased steel columns with different concrete cover thicknesses to measure their resistance to lateral displacements induced by blasts. Findings reveal that increasing the thickness of the concrete cover markedly improves the column's ability to withstand such loads. The study also highlights that steel has better energy dissipation properties than concrete. It examines how the combined challenges of progressive collapse and blast loading influence the overall structural response …

Numerical Study On Enhancing The Geotechnical Behavior Of Strip Footings On Oil-Contaminated Sand Using Stone Columns, Ahmad Nasr, Waseim Azzam, Mohamed Ahmed Mahmoud Abdelrehem

Journal of Engineering Research

Ground improvement techniques are frequently employed in construction sites characterized by weak soil conditions that may result in suboptimal performance. The use of ordinary and encased stone columns aims to enhance endurance, shear strength, and soil hardness, thereby mitigating settlement issues and expediting the consolidation of contaminated sand soils. In this research, a comprehensive investigation involving 74 cases was conducted to assess the behavior of both ordinary stone columns and encased stone columns under strip footing in contaminated sand subgrade. The objective was to discern the impact and characteristics of encapsulation in comparison to encapsulated stone columns, employing a Finite …

Experimental Investigation Of Light-Weight Concrete-Filled Stainless Steel Tube Composite Long Columns, Nadia Fath Alla, Kamel Kandeel, Mahmoud El-Nagar

Journal of Engineering Research

The main target of this study is to investigate the behavior and performance of long composite circular stainless steel columns filled with light-weight concrete. An experimental study was carried out on four specimens, two of them are long composite circular stainless steel columns with length 1400 mm, diameter 100 mm and thickness of stainless steel tube 2 mm filled with light-weight and normal concrete with strengths 12 and 26 mpa respectively, which denoted by C1400/12 and C1400/26. The other two specimens are short composite circular stainless steel columns with length 500 mm, diameter 100 mm and thickness of stainless steel …

Effect Of Addition Monofilament And Multifilament Polypropylene Fibers On Mechanical Properties Of Concrete At Elevated Temperatures, Nourhan Osama Hanafy Dr

Journal of Engineering Research

Some researchers studied the effect of different types of fibers on the strengths of concrete at elevated temperature. However, there are some limitations in the study of the strengths of concrete using different methods of cooling after elevated temperature. Thus, the main objective of this research is to study the mechanical properties of concrete with the addition of 1% polypropylene fibers, featuring different structures, at elevated temperatures and with various cooling methods, compared to normal concrete. An experimental program using three different series of mixes, the first series included normal concrete (control) mix without fibers, the second series included 1% …

On The Turbulent Viscosity Parameter Cμ In The K–Ε Model, Harshit Mishra, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Reynolds-averaged Navier–Stokes (RANS) models depend on empirical constants to close the Reynolds stress terms. The empirical constants were obtained using experiments conducted at low Reynolds numbers several decades ago. In this paper, we revisit the turbulent viscosity parameter Cμ, based on the stress–intensity ratio c² = |uw|/k. Here, |uw| and k are the absolute values of the Reynolds stress and turbulent kinetic energy, respectively. Through a priori comparisons, we find that the currently accepted value of Cμ = 0.09 does not agree with the latest direct numerical simulation (DNS) and experimental datasets of wall-bounded turbulent planar flows. Therefore, …

A Review Of Geopolymer Binder As A Grouting Material, Karla Sierra, Jinwoo An, Ryan Shamet, Jiannan Chen, Yong Je Kim, Boo Hyun Nam, Philip Park

Civil Engineering Faculty Publications

The utilization of geopolymer as a grouting material has gained significant attention in research and construction applications. Geopolymer grout is a type of binding material that differs from traditional grouts, typically based on Portland cement. Researchers have explored its effectiveness and potential applications in grouting processes, considering its unique properties and characteristics. In this paper, various studies employing and utilizing geopolymer as a grouting material are reviewed. The emphasis is on mixture design of geopolymer grout, physical property, chemical composition of geopolymer grout, rheological behavior of geopolymer grout such as yield stress (in case of Bingham fluid) and viscosity, and …

Ir Spectral Analysis Of Broussonetia Papyrefera Plant, Umid Hamroyevich Alamov, Zaytuna Ali Qizi Qurbonaliyeva, Dostonbek Qurbonsho Ugli Shomurodov, Elmurod Abduqodirovich Egamberdiev

Technical science and innovation

in this study, a method for determining the concentration of lignin, cellulose and hemicellulose in plant materials using Fourier-transform IR spectroscopy of Broussonetia papyrefera was developed and tested. The procedure is based on the use of calibration functions that reflect the dependence of the intensity of analytical absorption lines on the concentration of lignin (1512 cm-1) and cellulose (1450 cm-1) in standard samples; indirect correlation was used for hemicellulose. The model samples were ternary mixtures composed of lignin, bacterial cellulose and hemicellulose in different proportions. The proposed method was tested on a wide range of plant biomass samples.

Pozzolanic Reactivity Of Carbonated High-Calcium Fly Ash: A Mechanism Study, Gao Deng, Nannan Zhang, Wenyu Liao, Hongyan Ma, Yongjia He, Linnu Lu, Lingyu Chi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This research investigates the impact of accelerated carbonation treatment on the pozzolanic reactivity of high-calcium fly ash (HFA) by monitoring the reaction heat of HFA/carbonated HFA (CFA)-calcium hydroxide (CH) blends and elucidates the underlying factors influencing the pozzolanic reactivity. The results indicate that in HFA/CFA-CH blends, CFA exhibits a comparable pozzolanic reactivity to that of HFA. This is attributed to the carbonation products accelerating the formation of MonoCarb aluminate (main) and C-S-H, compensating for the reduced heat resulting from the diminished highly reactive components after the carbonation treatment. Additionally, the increased surface area due to carbonation treatment is favorable for …

Study Of The Synthesis Mechanism And Some Properties Of Oligomers Based On Epichlorohydrin And Diphenylguanidine, Rovshan Israilovich Ismailov, Normuhamad Edgarov, Alisher Israilovich Ismailov

Technical science and innovation

In this work, the synthesis and the scheme for obtaining an oligomer based on epiiodhydrin with diphenylguanidine were studied, the proportions of epiiodhydrin in the initial mixture, the yield of oligomers, and the reduced viscosity were studied. The results of spectroscopic and elemental analyzes are obtained, which show that changes in the ratio of monomers have almost no effect on the iodine content in the oligomer. This is apparently due to the fact that epiiodhydrin is much more active in reactions than amino compounds. By studying the degree of conversion on the viscosity of the oligomerization products, the effects on …

Justification Of The Effectiveness Of Software For The Design Of Open-Pit Mining, Tolib Olimovich Komilov, Bobirjon Nabijonovich Ashurov, Ulugbek Bakhtiyorovich Sattarov, Ma’Ruf Ixtiyorovich Karimov

Technical science and innovation

The article notes that the economic feasibility of implementing a project based on deposits directly affects the economy of the country and the region, as well as the construction of new facilities, the use of the most balanced approaches and design solutions in a complex will allow achieving the set goal of increasing production volumes and bringing the enterprise to a new level of development. In order to achieve the above goals, it has been proven with the implementation of investment projects using software for the design of open-pit mining, it is possible to further develop the region, agriculture with …

Methodology For Calculating The Technical And Economic Indicators Of A Photovoltaic Thermal Installation Based On A Thin-Film Cadmium Telluride Module, Islom Rakhmatovich Jurayev, Isroil Abriyevich Yuldoshev, Zukhra Islamovna Jurayeva

Technical science and innovation

This article presents a methodology for calculating the technical, economic and environmental indicators of the developed design of a photovoltaic thermal installation with a nominal electric power of 1,2 kW and a thermal power of 2.17 kW for simultaneous production of electric energy and hot water for household needs of consumers. The capacity of the installation is 5.26 kWh of electricity and 30 liters/hour of heated water. The schemes of obtaining hot water by additional heating of the heated water produced by the installation in the cool seasons of the year are presented. This installation allows to receive total energy …

Study Of The Physical-Chemical Properties Of Chitosan Synthesized By The Cryogenic Method From Apis Mellifera Bees, Dilnoza Sohibovna Isomitdinova, Gulnora Akmalovna Ikhtiyarova, Jahongir Mustaqim O’G’Li Sharopov

Technical science and innovation

Chitosan was synthesized from Apis Mellifera dead bees by traditional and cryogenic methods, and the degree of deacetylation, viscosity, and molecular mass of the synthesized sample was studied. Chitosan was synthesized by deacetylation of chitin under cryogenic conditions. NaOH concentration 40%, temperature 90 ± 3 °C, time 120 min. The degree of deacetylation, and molecular mass was determined using an Ubbelode viscometer. DDA was determined by conductometric titration under standard conditions. The degree of deacetylation of Apis Mellifera chitosan was 87%. synthesized by cryogenic method DDA of chitosan was 83% synthesized by traditional method. Conducting the synthesis in liquid nitrogen …

Development Of A Universal Humidity Converter At Ultra High Frequency, Hulkar Asadullayevna Usmonova, Asadulla Turgunbayev

Technical science and innovation

The article proposes the and principle of operation of a universal primary measuring transducer of humidity at an ultra-high frequency with reciprocating motion along the vertical axis of rotation, which allows increasing the information redundancy of the primary measuring transducer (the influence of inhomogeneities, including humidity in the composition of the material, on the measurement result is averaged). The design of the primary measuring transducer under consideration provides for correction of the moisture measurement result by the mass (density) of the material, which will make it possible to carry out measurements without preliminary weighing the sample. The obtained results of …

Algorithms And Solution To The Problem Of Parametric Identification Of The Gas Composition Of The Atmosphere, Baxodir Asatullayevich Xolxodjayev, Erkin Abduraxmanovich Esanov, Bekjon Abdullayevich Kuralov

Technical science and innovation

This article discusses the problem of identifying the gas composition of the atmosphere, which has important practical significance and allows us to illustrate the advantages of the proposed regularizing solution algorithms. Every еar, human industrial activity increasingly aggravates the problem of environmental protection. Among the diverse human impacts on nature, air pollution occupies a special place. Every еar, up to 500 thousand various pollutants are emitted into the atmosphere. In this regard, the task of monitoring the composition of the atmosphere is very relevant. Numerical studies of the problem of identifying the gas composition of the atmosphere have shown higher …

Analysis Of The Drives Of Pumping Stations In The Southern Part Of The Angren Coal Mine Of Uzbekugol Jsc, Shukhrat Badretdinovich Umarov, Murakam Mirzakhmatovich Mirsaidov, Islombek A’Lobekovich Abdullabekov, Saidamirkhon Hayrullakhon O‘G‘Li Oripov

Technical science and innovation

This article presents the results of a comprehensive analysis of the operation of pumping station drives in the southern part of the Angren coal mine of Uzbekugol JSC. The modes of operation and designs of pumps of various types are considered, including СPSH 850-240, D320-50, D1200-125 and GR170-30. The study covers the performance characteristics of these pumps, as well as their adaptation to the specific conditions of the coal mine. Special attention is paid to the impact of climate change on the operating modes of pumping units. Changes in the amount and intensity of precipitation, as well as fluctuations in …

Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Dr., Nada Alkhashab Eng., Ahmed Osman Dr., Dalia A. Ali Eng

Chemical Engineering

Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …

Evaluation Of Bridge Deterioration Factors: From Design Parameters To Community Impact., Lawrencia Akuffo

Theses and Dissertations

The structural health and economic variables influencing the state of bridges in New Jersey are thoroughly examined in this thesis. The predictive modeling of bridge conditions using stepwise selection and linear logistic regression approaches is the primary focus of the opening chapter. With its precise predictions about bridge condition, either being fair/good, our model offers insightful information about resource allocation and maintenance by identifying bridge features which affect the deterioration of bridges the most. This gives effective infrastructure management, which not only relies on the identification of the important predictors and their effects on bridge conditions but also ranks them …

Impulse, Fall 2024, Jill Fier, Micayla Standish, Jerome J. Lohr College Of Engineering

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Math Teacher Counts Her Blessings
3 | New Roles for Burckhard
4 | Three New Department Heads
6 | New Faculty and Staff
8 | Taking Engineering on The Road
10 | Dennis Helder Named Distinguished Alum
12 | Mccomish Endowment Making an Impact
14 | Innovate Sodak Supports Local Projects
16 | R1 the SDSU Way
18 | Nation’s Top Civil Engineering Student Chapter
22 | Hunter Wallster Setting Records
24 | Jenna Currier: When Passion Meets Talent
28 | Student Teams Compete
30 | RASC-AL Team Overcomes Setback
32 | Break the Ice Team Comes Home …

Analyzing Daytime/Nighttime Pedestrian Crash Patterns In Michigan Using Unsupervised Machine Learning Techniques And Their Potential As A Decision Support Tool, Baraah Qawasmeh, Jun-Seok Oh, Valerian Kwigizile

Waldo Library Student Exhibits

No abstract provided.

Eco-Friendly Packaging: Changing The Norm, Victoria C. Hoffmann, Mujde Erten-Unal

OUR Journal: ODU Undergraduate Research Journal

Packaging is an essential aspect of our daily life routines and is integral in preserving, protecting, informing, and selling the products we rely on. The advent of plastic packaging has allowed us to meet the rising consumer demand for efficient and economical packaging solutions. However, plastic packaging has also emerged as a significant contributor to environmental degradation. This review highlights the growing need for eco-friendly packaging alternatives, given the harmful impact of current packaging practices. It delves into several proposed sustainable packaging solutions and their limitations, and outlines strategic initiatives for safer packaging. As a society, it is critical to …

Performance Of Project Delivery Methods For Us Airport Projects: A Holistic Quantitative Risk-Based Assessment Through Perceptions Of Associated Industry Experts, Ramy Khalef, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The aviation sector received an underperforming D+ score, indicating its deteriorating qualities in comparison with the overall US infrastructure. In response, US governmental bodies issued investment bills that target the improvement of the nation's airport system. Airport projects are still being implemented through design-bid-build (DBB), which is notorious for its ineffective risk shift, low contractor input, and poor cost and schedule performance. Studies show that design-build (DB) possesses prospective cost and schedule benefits. Despite this, there is still reluctance toward DB's usage in airport projects. Moreover, current studies lack in offering frameworks that assist airport practitioners in guiding stakeholders toward …

Evaluation Of Kentucky’S Driver Focus Camera System, David Leddy, Brian Beaven, Xiaobing Li, Andrew Martin, Jennifer Walton, Chris Van Dyke

Kentucky Transportation Center Research Report

Commercial motor vehicle (CMV) drivers who engage in federally prohibited activities such as not wearing safety belts, using hand-held mobile phones, or texting while driving endanger themselves and imperil the well-being of everyone who occupies the surrounding roadway environment. Unfortunately, conventional CMV inspection routines fail to detect many of these violations because inspectors have difficulty obtaining a clear view of truck cab interiors from inspection facilities. Recognizing it is critical to improve enforcement of Federal Motor Carrier Safety Regulations, this project evaluated the performance of a Driver Focus Camera System (DFCS) at an inspection facility on Interstate 75 northbound in …

Kentucky Traffic Collision Facts Calendar Year 2023 Report, Paul Ross, Eric Green, Chris Blackden, Kenneth R. Agent, Chris Van Dyke

Kentucky Transportation Center Research Report

No abstract provided.

Analysis Of Traffic Crash Data In Kentucky 2019-2023, Paul Ross, Eric Green, Chris Blackden, Christopher Van Dyke, Teng Wang, Mohammad Majidi

Kentucky Transportation Center Research Report

No abstract provided.

Feasibility Study Of Oyster Shell Filtration Media For Stormwater Pollutants Removal, Sadiq Omer

Civil & Environmental Engineering Theses & Dissertations

The depletion of resources has raised interest in reusing or incorporating by-products into alternative materials. In the effort for net zero emissions, waste reduction, and a circular economy, it is crucial to reinvent the alternative utilization strategy for by-products as construction materials sustainably. This research examines the alternative utilization strategy for oyster shell by-products in regular stormwater pollutant removal best management practices (BMPs).

Numerous research has examined the utilization of oyster shell waste as a construction material in Asia and Europe, specifically focusing on the physical properties of crushed oyster shells as alternatives for aggregates. No studies have been identified …

Stability Of Two-Class Armour Berm Breakwaters: An Experimental Study, Mohammed Al-Ogaili, Amir Etemad-Shahidi, Nick Cartwright, Sigurdur Sigurdarson

Research outputs 2022 to 2026

The recession of a berm breakwater is a key parameter in ensuring its stability, and functionality, to protect coastal areas against wave impacts. Consequently, consideration of the expected recession in structural design is required to ensure the required objectives of the structure. In this study, physical model laboratory experiments were conducted to measure the recession of two-class armour berm breakwaters in response to varying sea state conditions (wave height, wave period, storm duration, and water depth at the structure's toe) and geometrical parameters (berm elevation from still water level, berm width, and rock size). A total of 110 tests were …

Sub-Surface Geospatial Intelligence In Carbon Capture, Utilization And Storage: A Machine Learning Approach For Offshore Storage Site Selection, Mehdi Nassabeh, Zhenjiang You, Alireza Keshavarz, Stefan Iglauer

Research outputs 2022 to 2026

This study introduces an innovative data-driven and machine-learning framework designed to accurately predict site scores in the site screening study for specific offshore CO2 storage sites. The framework seamlessly integrates diverse sub-surface geospatial data sources with human aided expert-weighted criteria, thereby providing a high-resolution screening tool. Tailored to accommodate varying data accessibility and the significance of criteria, this approach considers both technical and non-technical factors. Its purpose is to facilitate the identification of priority locations for projects associated with Carbon Capture, Utilization, and Storage (CCUS). Through aggregating and analyzing geospatial datasets, the study employs machine learning algorithms and an expert-weighted …

Experimental Study Of Coal Fines Migration Characteristics In Reservoirs With Diverse Coal Structures: Influence On Reservoir Behavior, Yingchun Wei, Ziliang Liu, Xianyue Xiong, Tiancheng Xie, Biao Li, Anmin Wang, Daiyong Cao, Zhenjiang You

Research outputs 2022 to 2026

The challenge of coal fines production within tectonic coal reservoirs during coalbed methane (CBM) development in China presents a significant concern. In this study, coal samples with distinct coal structures from Hancheng mining area were selected for experiments on coal fines migration. Our analysis focused on the distinctive characteristics of coal fines generated by various coal structures, the subsequent alterations in sample permeability, and the changes in pore and fracture structures before and after the experiments. By examining the reservoir properties across different structures, we aimed to uncover the migration characteristics of coal fines in these diverse coal reservoirs and …

Incorporation Of Gnss Technology For Water-Level Instruments, Armaan S. Oberai, Toma Grundler, Serena B. Lee, Stefan A. Talke

College of Engineering Summer Undergraduate Research Program

Our goal was to take an existing water-level measuring embedded system and upgrade the GNSS module for the purpose of getting the elevation of the device within an error of 1 cm. Main milestones for the project included deploying a successful field test at a known survey point, using software-based post processing to improve the GNSS solution point, and implementing robust hardware and software for the water-level embedded system such that it was easily scalable.