Civil and Environmental Engineering Commons^™

Methodology For Load Rating Double-Tee Girder Bridges, Sandip Rimal

Electronic Theses and Dissertations

The most common type of bridge on South Dakota (SD) local roads is precast prestressed double-tee (DT) girders. More than 700 DT bridges are currently in-service in SD. Structural detailing, aging, traffic volume, and environmental conditions affect the structural performance, integrity, and capacity of DT bridges. When a bridge is affected by one or more of the aforementioned parameters, the estimation of the bridge safe live loads is necessary to ensure the safety of the traveling public and to prevent excessive bridge damage and collapse. Load rating of damaged bridges is challenging mainly because of a lack of information regarding …

Laboratory Evaluation Of Internal And External Nutrient Removal To Control Algal Bloom In Eutrophic Lakes, Sepideh Sadeghi

Electronic Theses and Dissertations

Eutrophication is one of the most widespread water quality problems in lakes and reservoirs. Frequent cyanobacterial blooms resulting from eutrophication can greatly damage aquatic ecosystems and pose a high risk to human health. Phosphorus (P) and nitrogen (N) are the major causes for eutrophic conditions and can enter to the aquatic ecosystem via different sources. The combination of phosphorus precipitation and sediment capping are promising technologies to minimize internal P loading and control harmful algal blooms in eutrophic lakes. Denitrification bioreactors have emerged as an important edge-of-field treatment technology to reduce nitrate-nitrogen loads from external sources. The objective of this …

A Development Of Travel Time Equation For Overland Flow As Affected By Vegetation, Naga Vara Prasad Ganti

Electronic Theses and Dissertations

In overland flow water research, travel time is a significant parameter used in estimating peak discharge in channels or rivers. Overland flow is assumed to be in turbulent condition to estimate travel time using Manning’s Velocity Equation (MVE). When the flow is in a laminar condition, Grismer’s Laminar Mean Velocity Equation (GLMVE) is applied but fails to consider the roughness parameter. A review of the literature shows numerous equations for overland travel time, but there is no known equation that determines the mean velocity of overland flow under laminar condition with a roughness coefficient or other coefficient related to the …

Stresses In The End Zones Of Precast Inverted T-Beams With Tapered Webs, Ravi Siddharth Raja

Wayne State University Theses

Short to medium span composite bridges constructed with adjacent precast inverted T-beams and cast-in-place topping are intended to provide more resiliency against reflective cracking and time dependent effects compared to voided slabs and adjacent box girder systems. This thesis investigates the stresses in the end zones of such a uniquely shaped precast element. The transfer of prestressing force creates vertical and horizontal tensile stresses in the end zones of the girder. A series of 3-D finite element analyses were performed to investigate the magnitude of these tensile stresses. Hoyer effect is captured by modelling the strands as solid elements and …

Development Of Sorption Technology For Extracting Rare Earth Elements From Coal Fly Ash, Bilal Syed

Research Opportunities for Engineering Undergraduates (ROEU) Program 2017-18

Rare Earth Elements (REEs) are elements with many high tech uses (e.g., smartphones, electric cars, advanced weaponry) and have been identified by the DOE to be critical to the US economy. Currently, China supplies over 85% of REEs resulting in an undiversified market and susceptibility to supply shock and economic insecurity. To address this susceptibility, this research aims to develop an economic and environmentally-friendly method of extracting REEs from nascent, plentiful sources such as coal and coal by-products like fly ash.

Evaluating The Effectiveness Of Biochar For Treating Wsu Parking Lot Runoff, Alan-Christian Thomas

Research Opportunities for Engineering Undergraduates (ROEU) Program 2017-18

Various pollutants including pesticides, herbicides, automotive fluids, and excess nutrients from fertilizers are found in high concentrations in urban runoff. There are many technologies that can be used to control and redirect the water flow such as retention basins, constructed wetlands, and rain gardens; however, these methods are specifically focused on controlling water and not necessarily the nutrients and contaminants in the water. There has recently been an increased interest in the potential for using additional materials (e.g., compost, charcoal) to enhance the pollution treatment ability by either adding them to the soil or by engineering prefilters to remove pollutants …

Evaluating The Effectiveness Of Bioswales In Southeast Michigan, Grace Crowe

Research Opportunities for Engineering Undergraduates (ROEU) Program 2017-18

Bioswales are modern storm water management structures that utilize biological components in a traditional wale to more effectively filter out contaminants. Because of its modern nature the installation and management practices for bioswales is still developing. Perfecting the practices surrounding bioswales in southeast Michigan environment can aid in the advancement of green infrastructure in the state. Wayne State installed a bioswale in one its parking lots in New Center with the help of the Detroit Biodiversity Network (DBN). We wanted to monitor the progression of this existing bioswale throughout the year, observing the system components effecting overall bioswale performance. The …

Quantity Surveying Professional Apprenticeships: A Paragon For The Supply Of Talent In The Irish Construction Industry, Eoghan Ó Murchadha, Roisin Murphy

Conference papers

The construction industry in Ireland has undergone considerable change in the last decade, the effect of which has resulted in a legacy malfunction in the construction labour market. The recent construction downturn led to high levels of construction unemployment, resulting in the mass emigration of construction professionals. Additionally, perceptions of job uncertainty in construction deterred new entrants into construction-related training and education programmes such as Quantity Surveying. If a skills gap is allowed to prevail, then there is a tangible threat to the industry’s cost competitiveness. As such, value for money becomes merely theoretical, and the cost to the economy …

The Impact Of Brexit On Cross-Border Trade By The Construction Sector In Ireland: An Exploratory Study, Tara Brooks, Duga Ewuga, Lloyd Scott, John Spillane

Conference papers

Cross-border co-operation can foster learning and contribute positively to business performance and social cohesion. This paper considers construction firms' economic motivation for co-operation around the Ireland - Northern Ireland border. This area, while impacted by the Brexit uncertainty, shares many of the economic and developmental characteristics of border areas throughout Europe. The purpose of the study is to investigate the impact of Brexit on cross border trade by the construction sector in Ireland and investigate the current tensions and barriers to that sector. A qualitative methodology adopted a literature review and semi-structured interview strategy. Data was collected from purposively selected …

Trades And Apprenticeships Skills Survey: The Employers Perspective, Eoghan Ó Murchadha, Roisin Murphy

Reports

The construction sector in Ireland has gone through a period of extremes in the last decade, from an exceptionally high growth to deep and prolonged recession. The backdrop to this report, however, is one of favourable economic and industry conditions. Economic growth is positive, exchequer balances are improving, unemployment continues to decline and sentiment within the construction industry is strong across most sub-sectors.

The construction labour market however, remains in a state of disequilibrium. The severe recession had devastating consequences on construction firms in Ireland resulting in company closures, redundancy and mass emigration. At the same time the number of …

Catalytic Adsorption For Intermediate Products, Clint Cook

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

3-D Printed Concrete Structures: From Materials, Design, To Digital Fabrication, Marcos Gonzalez, Micah Weaver, Anias Hawkins

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Extraction Of Phase-Resolved Wave Data From X-Band Radar Imagery, Alexandra Simpson

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Typically, phase-resolved measurements of the sea surface are limited to single-point time series from in situ sensors, or arrays of multiple in situ sensors. The deployment of such devices is costly and time intensive, and the wave data they provide is limited in its spatial coverage and directional accuracy. Several remote sensing options, including optical video and X-Band marine radars, offer the possibility of full 2D reconstruction of the phase-resolved directional sea on spatial scales of kilometers. Ocean waves are visible in radar imagery as the ubiquitous backscatter from short wind ripples is modulated by the longer gravity waves. However, …

Evaluation Of Elastic Modulus Of Fiber-Reinforced Concrete, Nakin Suksawang, Salam Wtaife, Ahmed Alsabbagh

Mechanical and Civil Engineering Faculty Publications

This paper determines the effect of discrete fibers on the elastic modulus of concrete and cement composites. Five types of discrete fibers consisting of steel, polypropylene, macro-polyolefin, polyvinyl alcohol (PVA), and basalt fibers were investigated. Results show that discrete fibers had little effect on elastic modulus for fiber-reinforced concrete (FRC) with coarse-to-fine aggregate ratio (C/S) greater than 1. However, for FRC with C/S smaller than 1 and fiber-reinforced cement composites (FRCCs), discrete fibers reduced the elastic modulus. Accordingly, a new elastic modulus equation is proposed to better estimate the elastic modulus of FRC with a maximum fiber volume fraction of …

2018 Nebraska Groundwater Quality Monitoring Report

Nebraska Department of Environmental Quality: Reports

The 2001 Nebraska Legislature passed LB329 (Neb. Rev. Stat. §46-1304) which, in part, directed the Nebraska Department of Environmental Quality (NDEQ) to report on groundwater quality monitoring in Nebraska. Reports have been issued annually since December 2001. The text of the statute applicable to this report follows: “The Department of Environmental Quality shall prepare a report outlining the extent of ground water quality monitoring conducted by natural resources districts during the preceding calendar year. The department shall analyze the data collected for the purpose of determining whether or not ground water quality is degrading or improving and shall present the …

Assessing The Feasibility Of Soil Infiltration Trenches For Highway Runoff Control On The Island Of Oahu, Hawaii, Martina Sobotkova, Jaromir Dusek, Ghasem Alavi, Laxman Sharma, Chittaranjan Ray

Nebraska Water Center: Faculty Publications

The coastal waters of Hawaii are extremely important for recreation as well as for the health of the marine environment. Non-point source pollution from storm runoff poses a great threat to surface water quality in Hawaii. The State of Hawaii Department of Transportation (HDOT) includes infiltration trenches as a best management practice (BMP) option to reduce pollution caused by stormwater runoff. HDOT guidelines state that the implementation of BMPs is needed to reduce sediment and pollutant loads to streams and the ocean. In this study, the suitability of soils adjacent to highways on Oahu for the siting of infiltration trenches …

Additive Manufacturing With High Density Polyethylene: Mechanical Properties Evaluation, Calvin Wampol

Electronic Theses and Dissertations

High-density polyethylene is a common recyclable plastic that has a large potential as an additive manufacturing material due its economic and environmental benefits. However, high-density polyethylene has undesirable thermal properties that cause the material to shirk and not adhere to the printing bed during an additive manufacturing processes. Researchers have attempted to combat these thermal properties but have only created novel filaments of high-density polyethylene without being able to create 3D printed specimens for mechanical property testing. This paper presents several methods to create 3D printed specimens with pure high-density polyethylene filament on a fused filament fabrication type 3D printer. …

Analysis Of 3d Printed Cylindrical Members, Salvador Caballero

Electronic Theses and Dissertations

Compressive analysis of a structural member is the determination of the axial capacity of the member when it is undergoing a load causing the member to fail in either a buckling or a crushing mode. 3D printed plastic columns have not been characterized and analyzed yet. However, this research characterizes 3D-printed PLA columns and provides parameters for future researchers to investigate. The literature describes the different industries that utilize 3D-printing. In this research, we introduce an innovative approach to investigate the stresses produced in a 3D printed composite member, made of PLA and locally available soil. The compressive testing will …

Mechanical Bar Splices For Accelerated Construction Of Bridge Columns, Puskar Kumar Dahal

Electronic Theses and Dissertations

Mechanical bar splicing is an alternative method of connecting reinforcing bars in concrete structures compared to conventional lap splicing mainly to reduce bar congestion in joints. Recently, mechanical bar splices, which are also referred to as bar couplers, have been used to connect precast members to accelerate construction of concrete bridges and buildings. Current codes prohibit the use of couplers in the plastic hinge regions of bridge columns in high seismic zones. This may be because of a lack of systematic test data on the coupler performance, limited experimental studies on mechanically spliced bridge columns, and an engineering precaution. The …

A Framework For Assessing Water Quality, Prioritizing Recovery Potential, And Analyzing Placement Of Best Management Practices, Tadesse Animaw Sinshaw

Electronic Theses and Dissertations

Motivated by the U.S. EPA goals, this research developed a framework to support identification and restoration of nutrient-impaired water bodies. The study objectives were developing total nitrogen (TN) and total phosphorus (TP) prediction models, evaluating the impact of social indicators on assessing recovery potential, and developing a spatial decision support system for choice and placement of best management practices (BMPS). An artificial neural network was used to develop TN and TP predictive regional models for U.S. lakes using easily measurable and cost-effective variables. The performance of models was superior for regions trained with larger datasets and/or regions with lower temperature …

Guayule Plant Extracts As Binder Modifiers In Flexible (Asphalt) Pavement Mixtures, Steven Michael Lusher

Doctoral Dissertations

"The guayule (pronounced, 'why-YOO-lee') plant is a woody perennial shrub that is native to areas of the southwestern United States and northern Mexico, and is a well-documented source of high-quality natural rubber. The U.S. needs a domestic source of natural rubber to allay concerns about its future availability. Cultivation of guayule in North America has been attempted many times since the late 19th century, and companies, including major tire manufacturers, are again investing in guayule research. However, full-scale commercialization of guayule rubber needs established markets for the two basic by-products of guayule rubber extraction: the plant resins (primarily non-rubber compounds) …

Multi-Scale Investigation Of Microstructure, Fiber-Matrix Bond, And Mechanical Properties Of Ultra-High Performance Concrete, Zemei Wu

Doctoral Dissertations

"The main objective of this study is to provide new insights into enhancing fiber-matrix bond and mechanical properties of ultra-high performance concrete (UHPC). Three main strategies were investigated: 1) use of supplementary cementitious materials; 2) use of nano-particles; and 3) use of deformed fibers. A multi-scale investigation involving the evaluation of non-fibrous UHPC mortar phase (matrix), fiber-matrix interface phase, and then UHPC composite material was undertaken to determine microstructural characteristics, fiber bond to matrix, and key mechanical properties of the UHPC matrix and UHPC. Test results indicate that the incorporation of 10%-20% silica fume effectively improved the fiber-matrix bond and …

Sensitivity Of Rheological Properties Of Cement Paste With Scc Consistency, Azadehalsadat A. Asghari

Doctoral Dissertations

"Robustness, which is defined as the capacity of a mixture to tolerate small variations in constituent elements, mixing parameters or temperature that are inevitable with production at any significant scale, is a key property to expand the practical implementation of self-consolidating concrete (SCC). At the first step, the effect of different amount of water, amount of superplastizer, mixing time, mixing speed and the addition time of superplastizer on the rheological properties of cement pastes with SCC consistency, has been evaluated. Two different SCC mix design concepts, the powder-type and VMA-type were selected for this research. The results show that the …

Adaptive Data Analysis For Damage Detection And System Identification In Civil Infrastructure, Hongya Qu

Doctoral Dissertations

"Time-varying structural systems are often encountered in civil engineering. As extreme events occur more frequently and severely in recent years, more structures are loaded beyond their elastic conditions and may thus experience damage in the years to come. Even if structures remain elastic, energy dissipation devices installed on structures often reveal hysteretic behaviors under earthquake loads. Therefore, it is imperative to develop and implement novel technologies that enable the identification and damage detection of time-varying systems. In this dissertation, adaptive wavelet transform (AWT) and multiple analytical mode decomposition (M-AMD) are proposed and applied to identify system properties and detect damage …

Evaluation Of Cracking Indices For Asphalt Mixtures Using Scb Tests At Different Temperatures And Loading Rates, Katie E. Haslett

Honors Theses and Capstones

In recent years, there has been a shift towards implementing performance based pavement specifications (PBPS) to increase reliability of asphalt concrete mixture specifications and enhance service lives of roadways. Several of the performance indices used in PBPS are based on the asphalt mixture fracture tests. There is an increasing need for a better understanding the effects of temperature and loading rate interdependency for fracture properties of asphalt mixtures. The goal of this study is to build upon previous work conducted during a Summer Undergraduate Research Program (SURF) project entitled, “Exploration of Temperature and Loading Rate Interdependency for Fracture Properties of …

Bioaccessibility Of Lead From Contaminated Soil Using Phosphate Treatment -- Physiologically Based Extraction Test And In Vitro Gastrointestinal Method Test, Austin Charles Doss

Masters Theses

"Phosphate treatments are used to immobilize lead in soil by forming pyromorphite. Soil from Bonne Terre, Mo was collected to study whether such treatment decreases the bioaccessibility of lead. The soil was treated using 0.5 soil wt% of phosphate. Treatments were: none, phosphoric acid, triple super phosphate, and organic bone meal. Each sample was studied after one, four, sixteen, and twenty weeks; during this time span, water was added approximating the average rainfall rate. Percolated water was collected to test the leached phosphate concentrations. Phosphate was below the detection limit in that leachate. Remediated soil samples were used in Physiologically …

Examination Of Shear Friction Design Provisions, Nikkolas J. Edgmond

Masters Theses

"This thesis reports the results of research conducted to establish a state-of-the-art database of shear-friction studies to be turned over to ACI Committee 445-0D as a living document, utilize a subset of the established database to examine the effectiveness of the ACI 318 Code (2014), PCI Design Handbook (2010), AASHTO LRFD Bridge Design Specification (2016) and CSA A23.3 Design of Concrete Structures Standard (2014) provisions to predict shear transfer strength, and examine the effective coefficient of friction (µ_e) approach allowed in the PCI Design Handbook (2010).The shear friction design concept is applicable in conditions where direct shear must …

Nonlinear Finite Element Analysis Of Concrete Columns Subjected To Complex Loading, Adam Christopher Morgan

Masters Theses

"This study details the development and implementation of a finite element model within a commercial finite element code, Abaqus CAE, for the analysis of reinforced concrete (RC) bridge columns containing interlocking spirals subjected to combined loading conditions including axial, shear, bending, and torsional loads, including the post-peak response. The model is a first of its kind attempt at simulating the response of RC columns with continuous spiral transverse reinforcement and subjected to combined loading conditions including torsion. The model is utilized to determine the quasi-static load-deformation response under various proportions of the input loads and displacements. The resulting quasi-static load-deformations, …

Compressive Behavior Of Masonry Columns Confined With Steel Reinforced Grout (Srg) Composite, Sarah Elizabeth Jemison

Masters Theses

"In this study, a new type of composite comprised of steel fiber cords embedded in a natural hydraulic lime mortar matrix, known as steel reinforced grout (SRG), is explored for the use in confinement of masonry columns. An experimental study was carried out to understand the behavior of solid clay brick masonry columns confined by SRG jackets. Twenty-four confined and seven unconfined columns with a square cross-section were tested to failure under a monotonic concentric compressive load. Test parameters considered were the column corner condition, number of fiber jacket layers, and number of fiber overlapping faces. SRG confinement improved the …

Cyclic Axial Compression Behavior Of Concrete-Filled Hybrid Large Rupture Strain Frp Tubes, Monika Nain

Masters Theses

"This study introduces an experimental investigation of the behavior of concrete filled fiber reinforced polymer (FRP) tubes (CFFTs) under cyclic axial compression. The FRP used in this study were either small rupture strain FRP (SRS-FRP) or large rupture strain FRP (LRS-FRP). This paper also presents the first-ever experimental study on the behavior of concrete confined using hybrid LRS-FRP and SRS-FRP. LRS-FRP included PEN (polyethylene napthalate) and PET (polyethylene terephthalate) where both of them having ultimate axial strain larger than 5%, and low stiffness. SRP-FRP included carbon and glass FRP having small rupture strains, smaller than 2%, and high stiffness. The …