Civil and Environmental Engineering Commons^™

Rheological Models For Non-Newtonian Viscosity Of Modified Asphalt Binders And Mastics, Aboelkasim Diab, Zhanping You, Xuelian Li, Jorge Carvalho Pais, Xu Yang, Siyu Chen

Michigan Tech Publications, Part 1

This paper is aimed at providing a comprehensive experimental work on the viscosity behavior of different modified asphalt binders and mastics, as well as exploring mathematical representations of the results in attempts to predict the viscosity and flow behaviors according to Vinogradov-Malkin and Phillips-Deutsch models. The modified asphalt binders were prepared in the unaged and aged states using styrene-butadienestyrene (SBS), ethylene-vinyl acetate (EVA), and crumb rubber (CR); while the hydrated lime (HL) and fly ash (FA) were selected to produce the binder-filler mastics. To widen the study findings, the additives (polymers, rubber, and fillers) were applied at different possible levels …

2019 Fall Engr333 Project Final Report, Megan Black, Evan Block, Jacob Deysher, Zach Erickson, Peter Atma, John Macy, Paul Steenwyk, Justin Skaggs, Justin Eekhoff, Adam Marquardt, Alan Samdel, Nathan Van Wyhe, Zach Ashenfelter, Brett Ermer, Clayton Lockwood, Ryan Schierbeek, Andrew Zerull, Matthew Buist, Hannah Chilkiewicz, Nathan Hall, Holly Straup, Ivy Chipinda, Andrew Huston, Peter Oh, Tony Vander Ploeg, Josh Hallenbeck, Cameron Ilbrink, Bridget Pertzsch, Lillie Spackman, Zuber Abdella, Michael Merz, Nathan Schuten, Abigail Willson, William Benneh, Marcus Gelder, Steven Vanast, Tyler Johnson, Christopher Pappageorge, Trevor Sando

ENGR 333

Today, many institutions and individuals see energy efficiency as an important issue; reducing energy consumption is thought to decrease demand for fossil fuels and consumes energy more sustainably. However, while more efficient devices can save users both energy and money, they do not always result in less energy use as a society. This discrepancy between expected and actual energy savings is called the rebound effect. This can be a result of several factors: increased use of the device drawing more energy, manufacturers using more energy to create the new device, or money saved by the users being respent in the …

Strengthening Of Corroded Steel Structures Using Cfrp – An Experimental Review, Ghada El-Mahdy Ph.D., P.Eng, Abdallah H. Yassin, Abdel El Rahman Khaled

Civil Engineering

Fibre reinforced polymers (FRP) have been widely used to strengthen reinforced concrete structures, however, nowadays their use to strengthen steel structures is under investigation. In particular, the need to strengthen corroded steel structures found in aggressive environments, such as marine environments, which have undergone a reduction in cross-sectional area and hence a reduction in their load-carrying capacity is in need of studying. The main problems that arise when using carbon fibre reinforced polymer (CFRP) sheets to strengthen steel structures is the weakness in the interfacial bond between the CFRP and the steel surface, the thinness of CFRP sheet, and the …

Sway And No-Sway Behaviour Of Pitched Roof Portal Frames Composed Of Cold-Formed Steel Sections, Ghada El-Mahdy Ph.D, P.Eng., Maged Tawfick Hanna Ph.D

Civil Engineering

Cold-formed sections buckle locally and distortionally in combination with overall buckling of the member. When these sections are incorporated into a portal frame structure, this combination of buckling modes affects the overall buckling behaviour of the portal frame. The objective of this paper is to study the effect of local and distortional buckling on the overall behaviour of portal frames. The portal frames studied have a span of 10 m and an eave height of 3 m with a roof pitch of 1:10. Two frames are studied the first with one intermediate interconnector at the midpoints of the column and …

Using Nano- And Micro- Structural Materials For Concrete Environmental Applications, Hala Nabeel Elia

Theses and Dissertations

Utilized globally in the construction industry, concrete is an integral component of homes, roads, airports, skyscrapers, and tunnels. Traditional concrete components are cement, fine aggregate (sand), coarse aggregate (gravel or crushed stone), and water. When cement and water compound together they will make a paste which binds all the aggregates together to make the concrete. Unfortunately, every one ton of cement manufactured emits 0.9 ton of CO2into the air. The goal of this two-part work was to obtain an environmentally friendly concrete. The first part used supplementary cementitious materials (SCM), fly ash and silica fume, to create concrete with high …

Human-Infrastructure Interfaces (Hii) Enabled Using Augmented Reality (Ar), Dilendra Maharjan

Civil Engineering ETDs

The modern industrial society is built upon the productivity of advanced computing and agile machines assisting the human workforce to perform their tasks more effectively, accurately and efficiently. The industrial revolution termed as "Industry 4.0" is based on the intelligence of machines working with humans in a collaborative work-space. Contrarily, infrastructure management has relied on the human for making day to day decisions. New emerging technologies can assist during infrastructure inspections, to quantify structural condition with more objective data. However, today's’ owners agree in trusting the inspector's decision in the field over data collected with sensors. If data collected in …

Evaluation Of A Novel Remote Displacement Sensor Prototype Using Video And Laser-Based Technology For Civil Infrastructure Applications, Nicholas J. Brown

Civil and Environmental Engineering Master's Project Reports

Deflection measurements on structures, especially with regards to long-term monitoring, continues to be a challenge with current sensor technologies. Material degradation and changes in the mechanical properties due to aging (for example, creep and shrinkage in concrete bridges) directly impact the deflections exhibited by a structure. In this article we introduce and discuss the evaluation of a novel laser and video-based displacement sensor prototype to monitor displacements and rotations in structures remotely. The sensor is both inexpensive, using off-the shelf components, but also accurate and practical for situations that do not allow the use of conventional displacement sensors, which require …

Flood Dynamics In The Portland Metropolitan Area, Past, Present, And Future, Lumas Terence Helaire

Dissertations and Theses

The Portland area has an extensive flood history since it was founded in 1845. In the late 19th century, the Portland area was prone to flooding from snowmelt freshets (3-6 months duration) and brief winter rain or rain-on-snow events. Since that time the magnitude of spring freshets has been curtailed by 45% due to climate change, flow diversions, and reservoir management. Along with changes in hydrology, the bathymetry of the Lower Columbia River has been altered by the dredging of the navigation channel, diking, and land reclamation. To understand how these changes in hydrology and bathymetry have affected tidal and …

In-Plane Vibration Of Hammerhead Resonators For Chemical Sensing Applications, Luke A. Beardslee, Christopher Carron, Kemal S. Demirci, Jonathan Lehman, Steven Schwartz, Isabelle Dufour, Stephen M. Heinrich, Fabien Josse Phd, Oliver Brand

Civil and Environmental Engineering Faculty Research and Publications

Thermally excited and piezoresistively detected in-plane cantilever resonators have been previously demonstrated for gas- and liquid-phase chemical and biosensing applications. In this work, the hammerhead resonator geometry, consisting of a cantilever beam supporting a wider semicircular “head”, vibrating in an in-plane vibration mode, is shown to be particularly effective for gas-phase sensing with estimated limits of detection in the sub-ppm range for volatile organic compounds. This paper discusses the hammerhead resonator design and the particular advantages of the hammerhead geometry, while also presenting mechanical characterization, optical characterization, and chemical sensing results. These data highlight the distinct advantages of the hammerhead …

Contemporary Problems In Aerosol Aggregation And Gelation, Pai Liu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Aggregation of nanoparticles in aerosols is a fundamental phenomenon with important implications to diverse fields ranging from material synthesis to pollutant control. The past few decades have witnessed extensive research on investigating the structure and growth mechanism of aerosol aggregates with sizes spanning across several orders of magnitude. This dissertation focuses on some contemporary problems that remain unaddressed in this topical area. Aerosol aggregates in sub-micron regimes, which are formed via the irreversible collision and aggregation of solid nanoparticle monomers, are fractal-like in their morphology. A mathematical description of this seemingly random structure dates to the seminal works by Forest …

Treatment Of Perchlorate And Multiple Oxyanions: Chemical And Biological Investigations, Mark Elkouz

UNLV Theses, Dissertations, Professional Papers, and Capstones

Groundwater contamination with oxyanions is an issue that must be addressed for environmental, ecological and societal reasons. Chemical and biological treatment methods of reduction are already known and practiced, but the simultaneous presence of multiple oxyanions can add complicating effects to treatment sequence and efficacy. This research was concerned with the investigation of the chemical reductive treatment of Cr(VI) using both calcium polysulfide (CaSx) and ferrous sulfate (FeSO4), and the biological reductive treatment of chlorate, Cr(VI), nitrate and perchlorate using multiple organic substrates. The chemical treatment phase consisted of initial jar tests, using CaSx and FeSO4, followed by a laboratory …

Examining The Effectiveness Of A 4d Schedule And A Virtual Reality Model On A Modular Project: Unlv Solar Decathlon Case, Rajarshi Ghimire

UNLV Theses, Dissertations, Professional Papers, and Capstones

The use of a 4D schedule as technological advancement has brought significant improvement to the planning and execution of construction projects, through visualizing stepwise construction progress, following a sequence of pre-planned activities, and finalizing a baseline schedule with necessary changes. Moreover, the application of virtual reality (VR) to create interactive 3D models of a planned structure has made it possible to make a detailed planning of any construction project. Because of these benefits, the use of 4D schedules and VR in the construction industry has increased drastically, leading to improved planning and execution. However, past studies have given little attention …

Alkali-Silica Reactivity Of Mortars Containing Natural Pozzolan, Arash Kian

UNLV Theses, Dissertations, Professional Papers, and Capstones

Alkali-silica reactivity is one of the most recognized deleterious phenomena in Portland cement concrete resulting in cracks, spalling, and other deleterious mechanisms.

The aim of this study was (i) to assess the extent of reactivity of the aggregates, quarried from seven different sources, suspected of being conducive to ASR, and (ii) to compare the effectiveness of industrial (Class F fly ash) and natural pozzolans in mitigation of alkali-silica reactivity of the studied aggregates. To this end, seven aggregate sources, four natural pozzolan sources, and one source of Class F fly ash were used. ASTM Type V Portland cement was replaced …

Design Of Efficient Carbon-Based Adsorbents For The Removal Of Organic And Inorganic Water Contaminants, Sayedeh Soroosh Mortazavian Dehkordi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Granular activated carbon (AC) and biochar (BC) are two carbon-based adsorbents commonly used for water and wastewater treatment. However, these adsorbents have drawbacks that suppress their aqueous contaminants removal efficiency. Their major disadvantages are that AC has low selectivity and reusability potential, and BC has a hydrophobic nature.

The scope of this dissertation is to enhance the performance of commonly-used carbon-based adsorbents for the removal of organic and inorganic water contaminants and to understand the interactive mechanism of contaminants’ ions/molecules with adsorbents. Hexavalent chromium (Cr(VI)) and trichloroethylene (TCE) are two types of inorganic and organic water contaminants, respectively, which are …

Development Of Natural Perlite Based Concrete For Sustainable Construction, Seyedmahmoud Motaharikarein

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study aimed to partially replace Portland Cement (PC) with environmentally friendly binders capable of improving the longevity of concrete. The new binders consisted of different proportions of natural pozzolan (perlite) with various fineness and particle size distributions. A step-by-step research program was designed to: (1) discover the optimum fineness of perlite powder and its optimum replacement level with cement; (2) investigate the rheological properties of the perlite-containing mixtures, and examine whether this binder can be used in selfconsolidating concrete; and (3) assess the weaknesses of the new binder, and improve its deficiencies by using nanomaterials such as nano-silica. The …

Sizing A New Bike Sharing System For The University Of Nevada, Las Vegas, Nesley Orochena

UNLV Theses, Dissertations, Professional Papers, and Capstones

The strategic planning objectives for a novel Bike Sharing Systems (BSS) are to locate the BSS stations, size the stations, and determine the bicycle fleet size, among others. Current guidelines to design BSS programs are tailored to city centers with large coverage areas and high bicycle to population ratios, and thus not directly transferable to a university setting. An ordered probit model was created using data from a university online stated preference survey to determine the key factors that affect the uptake rates for the UNLV BSS program and to estimate the potential demand. The demand analysis was incorporated into …

Impact Of Design Cost Percentage On Cost Growth, Schedule Growth, And Construction Intensity Of Road Construction Projects, Elina Prajapati

UNLV Theses, Dissertations, Professional Papers, and Capstones

The performance of construction projects is measured in terms of cost and schedule variation. Studies have identified that such variations are mainly due to design changes, which are more frequent on projects executed through the design-bid-build (DBB) delivery method. Thus, the design factor is identified as one of the major parameters affecting the performance of DBB projects. Despite the majority of road projects being constructed following the DBB method, the impact of design cost on the performance of road projects has not been sufficiently studied yet. Therefore, this study focuses on determining the effect of design cost on the performance …

Carbon Management And Volatile Fatty Acid Production In Primary Clarifiers At A Wastewater Treatment Plant, Brittany Nicole Radke

UNLV Theses, Dissertations, Professional Papers, and Capstones

An increasing number of treatment plants are required to remove nutrients from domestic wastewater to lessen the impact of nutrient loading to water bodies. Enhanced Biological Phosphorus Removal (EBPR) is one of the processes commonly used to remove phosphorus from domestic wastewater. The presence of an adequate quantity of volatile fatty acids (VFA) in the wastewater influent to EBPR is important for process efficiency and stability. The objective of this research was to investigate the production of VFAs through fermentation of sludge in primary clarifiers as it related to improving nutrient removal, primarily targeting phosphorus.

The research tested, in full-scale, …

Application Of Data-Driven And Process-Based Modeling Approaches For Water Quality Simulation In Lakes And Freshwater Reservoirs, Ali Saber Sichani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lakes and freshwater reservoirs often serve as the primary drinking and irrigation water sources for surrounding communities. They provide recreational and tourism opportunities, thereby promoting the prosperity of neighboring communities. Reliable estimates of water quality in lakes and reservoirs can improve management practices to protect water resources.

Seasonal water temperature and solar shortwave radiation variations, and their subsequent interactions with water column aquatic life, combined with seasonal variations of mixing intensity throughout the water column, result in variations of water quality constituents with depth during the annual cycle. The complexity of these variations entails the use of advanced water quality …

Evaluation Of Titanosilicate Materials For The Sorption Of Cesium And Strontium From High Level Wastes, Matheus Tolentino Lauar

UNLV Theses, Dissertations, Professional Papers, and Capstones

Treatment of high-level waste (HLW) stored in the U.S. Department of Energy (U.S. DOE) sites of Hanford and Savannah River involves the separation of radioactive cesium (137Cs) and strontium (90Sr). Challenges in treating the liquid HLW includes high alkalinity or acidity, and high salt content, many orders of magnitude above Cs and Sr concentrations. Ion exchange is the preferred process for removing these compounds, due to the availability of selective media and large volume-processing capacity by column operations. The crystalline silicotitanate (Na2Ti2O3SiO4·2H2O), i.e. CST, which structure is analog to the mineral sitinakite, is considered the reference material for this application. …

Galena Creek Bridge Structural Health Monitoring Instrumentation And Modeling, Leopold Falkensammer

UNLV Theses, Dissertations, Professional Papers, and Capstones

Structural health monitoring (SHM) of an instrumented structure provides numerous benefits when assessing the long-term condition of the structure against degradation, or the short-term condition after an extreme event, such as an earthquake. The Nevada Department of Transportation (NDOT) has an interest in expanding the use of SHM for such assessments. Accordingly, the objective of the current study is to develop and implement a permanent SHM system for the Galena Creek Bridge, the largest concrete cathedral arch bridge in the world, to monitor its response to routine traffic and seismic activity. Completed in 2012, the bridge connects Reno and Carson …

Utility Of Bench Scale Sand Tank Experiments At Assessing Permeable Reactive Barrier Design, Brandon Meier

UNLV Theses, Dissertations, Professional Papers, and Capstones

The objective of this work was to evaluate the utility of bench scale sand tank experiments at assessing permeable reactive barrier (PRB) design. Our criteria for meeting this goal was that differences between PRB designs could be identified solely by measuring concentration in outflow from the sand tank models. For our PRB designs (funnel-and-gate, staggered wells, and parallel bars), numerical simulations clearly showed that PRB design had a quantifiable effect on outflow concentration, provided that the solute reacted with the PRB materials. Conversely, use of a conservative (non-reactive) solute did not allow us to discern between PRB design alternatives. Employing …

Retrofit Of Corroded Corrugated Metal Culverts Using Gfrp Slip-Liner, Rahulreddy Chennareddy

Civil Engineering ETDs

Culverts are water conveyance structures, typically used to allow water flow and maintain a balance between the flow streams without interrupting structures such as highways and bridges. Corrugated metal pipes (CMPs) have been used as culverts in North America since the 1950s because of their low cost and simple construction method. Today, the corrosion of CMPs is a major problem faced by all U.S. Departments of Transportation. There is an urgent need to provide an efficient solution, one that is corrosion-resistant, to retrofit thousands of corroded CMPs across the country. High specific strength, high strength to weight ratio, corrosion resistance, …

Rapid Characterization Of Dissolved Organic Matter And Precursors To Disinfection By-Products By Fluorescence Technique, Taha Marhaba

Sustainability Seminar Series

Natural organic matter (NOM) in the environment today does not only come from humic sources, but also from non-humic or synthetic sources. The typical total organic carbon (TOC) analysis has been typically used as an aggregate measure of NOM in water. NOM from surface water sources were isolated and fractionated by resin adsorption techniques into hydrophobic acid, hydrophobic neutral, hydrophobic base, hydrophilic acid, hydrophilic neutral and hydrophilic base. The Spectral Fluorescent Signatures (SFS) technique through a database of spectral characteristics specific to each fraction was developed for the identification of the six NOM fractions. Among the main advantages of the …

Bringing Statistical Learning Machines Together For Hydro-Climatological Predictions - Case Study For Sacramento San Joaquin River Basin, California, Balbhadra Thakur, Ajay Kalra, Sajjad Ahmad, Kenneth W. Lamb, Venkat Lakshmi

Civil and Environmental Engineering and Construction Faculty Research

Study region: Sacramento San Joaquin River Basin, California Study focus: The study forecasts the streamflow at a regional scale within SSJ river basin with largescale climate variables. The proposed approach eliminates the bias resulting from predefined indices at regional scale. The study was performed for eight unimpaired streamflow stations from 1962–2016. First, the Singular Valued Decomposition (SVD) teleconnections of the streamflow corresponding to 500 mbar geopotential height, sea surface temperature, 500 mbar specific humidity (SHUM500), and 500 mbar U-wind (U500) were obtained. Second, the skillful SVD teleconnections were screened non-parametrically. Finally, the screened teleconnections were used as the streamflow predictors …

Effect Of Incorporating Pottery And Bottom Ash As Partial Replacement Of Cement, Bassam A. Tayeh, Doha M. Alsaffar, Lawend K. Askar, Asmahan Issa Jubeh

Karbala International Journal of Modern Science

This study addressed the environmental constraints in cement produc­tion. Ordinary Portland cement (OPC) was replaced with pottery powder (PP, produced by grinding locally available pottery) and bottom ash (BA) at 10%, 20% and 30% of cement mass. Moreover, 4% calcium chloride solution (CaCl₂.2H₂O) was used as mixing water. Material properties, such as standard consistency, setting time and compressive strength, were measured with different percentages of OPC replacement with PP and BA. Results indicated that the replacement with PP and BA increased the water demand to achieve the standard consistency. These results revealed that the strength evolution …

Lidar Assessment To Monitor Bridge Response Under Live And Dead Loads, Daniel Watson

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Understanding how a bridge structure responds to various loads in a time and resource-efficient approach is vital in characterizing bridge health. Bridge health monitoring is an evaluation of the structural condition and performance, which optimizes limited transportation budgets by prioritizing the bridges that are in the most need for retrofit or replacement. Identifying and remedying issues will mitigate long-term problems and ensure that the bridge remains open to service for all legal loads. In contrast, health monitoring and load rating will determine if a bridge can only carry traffic up to a certain weight or speed, requiring a bridge load …

2019 Fall Engr333 Poster, Megan Black, Evan Block, Jacob Deysher, Zach Erickson, Peter Atma, John Macy, Paul Steenwyk, Justin Skaggs, Justin Eekhoff, Adam Marquardt, Alan Samdel, Nathan Van Wyhe, Zach Ashenfelter, Brett Ermer, Clayton Lockwood, Ryan Schierbeek, Andrew Zerull, Matthew Buist, Hannah Chilkiewicz, Nathan Hall, Holly Straup, Ivy Chipinda, Andrew Huston, Peter Oh, Tony Vander Ploeg, Josh Hallenbeck, Cameron Ilbrink, Bridget Pertzsch, Lillie Spackman, Zuber Abdella, Michael Merz, Nathan Schuten, Abigail Willson, William Benneh, Marcus Gelder, Steven Vanast, Tyler Johnson, Christopher Pappageorge, Trevor Sando

ENGR 333

Energy efficiency can be a worthy goal for institutions and individuals; reducing energy consumption decreases demand for fossil fuels and consumes energy more sustainably. However, more cost-effective devices can lead to behavioral changes that ultimately increase energy consumption, even though the devices themselves are more energy efficient: This called the rebound effect. Rebound occurs when less energy is saved than expected. This can be a result of several factors: increased use of the device drawing more energy, manufacturers using more energy to create the new device, or money saved by the users being re-spent in the economy. The combination of …

Forensic Investigation Of Building Failure – The Harbour Cay Condominium Disaster, John Airis

Publications and Research

When a building suffers collapse, the U.S. Occupational Safety and Health Administration (OSHA) is tasked with conducting an investigation into the cause. Often OSHA will request technical assistance from the National Institute for Standards and Technology to assist in the forensic technical aspects determining a most probable cause. This forensic effort entails many actions. The Harbour Cay Condominium disaster occurred on March 28, 1981 in Cocoa Beach, Florida. It was a total collapse of a five story reinforced concrete structure during the last stage of roof construction, resulting in 11 deaths and 24 injuries. The investigation report revealed structural design …

College Of Engineering Senior Design Competition Fall 2019, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …