Civil and Environmental Engineering Commons^™

Groundwater Quality And Health Risk Assessment In The Fujairah Region Using Hydrogeochemical, Statistical, And Spatial Approaches, Mohammed Khaled Alawlaqi

Thesis/ Dissertation Defenses

Groundwater is a valuable resource in the arid climate of the United Arab Emirates, where growing population, agricultural, and industrial activities are putting increasing pressure on limited groundwater reserves. This study investigates the hydrogeochemical characteristics of groundwater in the Fujairah region, with a particular focus on major ions and trace metals, to assess water quality and potential health risks. A total of 64 groundwater samples were collected from the Eastern Shallow Aquifer (ESA) and the Ophiolite aquifer in the study area and were analyzed for physicochemical parameters, major ions, and trace metals. Hydrogeochemical interpretation was conducted using Piper, Gibbs, Chadha, …

Enhancement Of Aeration And Activated Sludge Processes Using Micronanobubbles For Efficient Wastewater Treatment, Marwa Ahmed Abdelhamid

Thesis/ Dissertation Defenses

Aeration is considered one of the most reliable and efficient processes in wastewater treatment. However, conventional aeration systems show low performance with respect to the gas transfer during the treatment process. This poses a challenge in maintaining sufficient dissolved oxygen (DO) concentrations essential for the treatment. The use of micronanobubbles (MNBs) in the aeration process has been proposed as effective tool in water and wastewater treatment owing to their stability and longevity. MNBs’ stability is a distinctive property resulting from several mechanisms, including the repulsion force due to charged surfaces that helps bubbles to resist coalescence/bursting. MNBs’ longevity is represented …

Synthesis Of Sustainable Self-Foaming Glass Ceramics Using Waste Glass And Aluminium Dross, Abba Musa Hassan

Student Works (2020-2029)

The growing global demand for sustainable materials has driven extensive research into lightweight insulating materials, such as self-foaming glass ceramics (SFGCs), which align closely with the principles of a circular economy. While the alkali activation of aluminosilicates offers an environmentally friendly alternative to conventional, energy-intensive industrial methods for producing glass-based foams, current approaches often depend on synthetic foaming agents, high-speed agitation, and elevated sintering temperatures. These factors adversely affect slurry rheology, resulting in suboptimal microstructures, reduced mechanical strength, increased production costs, and negative environmental impacts. This study contributes to the advancement of the field by developing eco-friendly SFGCs using soda-lime …

Potential Use Of Waste-Derived Products In Producing Geopolymer Sorbents, Mariam Mohammed Al Nuaimi

Thesis/ Dissertation Defenses

Environmental sustainability and the circular economy are central to addressing global challenges in waste management and water pollution. This study investigates the synthesis and performance of geopolymers derived from industrial wastes, including fly ash, waste glass, silt deposits, and carbide lime, as adsorbents for methylene blue (MB) dye removal from water. Geopolymers were engineered under varying particle sizes, NaOH addition methods, and curing temperatures. Their physicochemical and microstructural properties were thoroughly characterized via scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier Transform Infrared Spectroscopy (FTIR), andparticle size analysis (PSA). Among the tested formulations, the sodium silicate–sodium hydroxide …

Durability Of Basalt Fiber-Reinforced Polymer Bars In Moist Concrete Under Sustained Load, Osama Ahmed

Thesis/ Dissertation Defenses

This thesis is concerned with the long-term durability of basalt fiber-reinforced polymer (BFRP) bars embedded in moist concrete. The study focuses on the combined effects of exposure duration, elevated temperature, and sustained tensile stress, which together influence the mechanical and chemical stability of BFRP reinforcement in aggressive environments. The main objective is to evaluate the degradation mechanisms of BFRP bars subjected to coupled hygrothermal and mechanical conditions and to develop a predictive durability model capable of estimating service life under realistic climate scenarios. Concrete-encased BFRP bars were conditioned at three temperatures (20, 40, and 60°C), three durations (3, 6, and …

Assessment Of Traffic Related Air Pollution Effects On Indoor Air Quality In Educational Buildings, Ahmed Gouda Mohamed, Mohamed Sherif Dr., Fahad Alqahtani Dr., Yousif Deeb Eng.

Civil Engineering

This study assesses the impact of traffic-related air pollution (TRAP) on indoor air quality (IAQ) within a Riyadh school. The main objectives are to pinpoint factors influencing IAQ and to evaluate the effectiveness of existing ventilation and filtration systems. Air quality Egg sensors monitored nitrogen dioxide (NO2), carbon monoxide (CO), and particulate matter (PM1.0, PM2.5, PM10) levels both indoors and outdoors over 30 days. Findings revealed average indoor PM2.5 and PM10 concentrations of 14.09 µg/m3 and 18.15 µg/m3, respectively, while outdoor concentrations averaged 20.63 µg/m3 and 27.88 µg/m3. A strong positive correlation was observed between indoor and outdoor PM levels, …

Rehabilitation Of Reinforced Concrete Columns Pre-Damaged By Corrosion Using Advanced Composite Materials, Feras Farid Abu Obaida

Thesis/ Dissertation Defenses

Reinforced concrete (RC) columns exposed to aggressive environments are highly susceptible to corrosion-induced deterioration, resulting in significant reductions in load-carrying capacity. This research investigates the structural performance of RC circular short columns with varying levels of corrosion damage and evaluates the effectiveness of two composite-based repair techniques, namely carbon fabric-reinforced cementitious matrix (C-FRCM) and carbon fiber-reinforced polymer (C-FRP) composites, combined with concrete cover replacement. The study aims to establish these methods as practical solutions for rehabilitating corrosion-damaged columns under concentric and eccentric loading conditions. The experimental program included 30 RC column specimens tested in two phases. Phase I involved thirteen …

Downdrag Defeated – The Neutral Plane Method, Kyle L. Zak, Min Sang Lee

Civil Engineering Professional Development Seminar

The neutral plane method for evaluating downdrag on deep foundations has been gaining popularity over the past few years. It is a powerful tool that, in many situations, can all but eliminate downdrag concerns on deep foundations. INDOT has allowed its use recently and adapted its forms to accommodate this method. The presentation will cover the theory behind the method and how it can be applied in bridge design. We will then demonstrate how to incorporate the method into the INDOT workflow, and we’ll show a couple real-life examples where the neutral plane method saved the day.

Curbless By Design: Revitalizing Downtown Infrastructure For Pedestrians, Alex Duran, Steve Cherry

Civil Engineering Professional Development Seminar

This presentation will discuss the design of a curbless, pedestrian-focused corridor as part of a small-town downtown reconstruction in Sylvania, Ohio. The project team will share how they balanced community goals, accessibility, and utility coordination, along with considerations for drainage, hardscape, lighting, and power. The session will also highlight early construction lessons learned from Phase 1.

Guardrail Design And Placement 101, Katherine Smutzer

Civil Engineering Professional Development Seminar

Not all “guardrail” is created equal. Within the last 10 years INDOT has adopted the MASH-compliant Midwest Guardrail System (MGS). While similar to the previous standard w-beam guardrail, there are nuances that aren’t well understood by designers. The presentation would reinforce the fundamentals of guardrail as a safety barrier, explain the function of various components of a guardrail system, and review important design considerations.

Mass Timber Construction: Products, Performance And Design, Anthony Harvey

Civil Engineering Professional Development Seminar

Due to their high strength, dimensional stability and positive environmental performance, mass timber building products are quickly becoming materials of choice for sustainably‐minded designers. This presentation will provide a detailed look at the variety of mass timber products available, including glue‐laminated timber (glulam), cross laminated timber (CLT), nail laminated timber (NLT), heavy timber decking, and other engineered and composite systems. Applications for the use of these products under modern building codes will be discussed, and examples of their use in U.S. projects reviewed. Mass timber’s ability to act as both structure and exposed finish will also be highlighted, as will …

Cytotoxicity And Genotoxicity Of Glyphosate And Roundup Quickpro On Chinese Hamster Ovary Cells, Tasnimul Ferdous, Qingfang He, Wen Zhang

Civil Engineering Faculty Publications and Presentations

Glyphosate and Roundup products have become the most used herbicide worldwide. However, previous bans in Europe and recent reversal have caused confusion over their safety. This study aims to investigate the cytotoxic and genotoxic effects of Roundup QuickPro and its main ingredient glyphosate using Chinese hamster ovary (CHO) cells. Cytotoxicity was calculated by measuring CHO cell viability with 72 h of exposure to each toxicant. Roundup QuickPro exhibited higher cytotoxicity with LC50 of 511.2 mu g/mL than glyphosate's LC50 of 3389 mu g/mL. The recommended application concentration (11,233.7 mu g/mL) of Roundup QuickPro is much higher than the measured LC50, …

Carbon-Neutral Concrete: A Review On Carbon Capture, Storage, And Utilization Technologies, Syed Muhammad O Naqvi, Muhammad Daniyal Raza, Syed Muhammad Bilal Haider

Civil Engineering Faculty Publications

Concrete industry is responsible for approximately 7% of total CO2 emissions around the globe making it a critical target for decarbonization. This review study evaluates carbon capture, utilization, and storage (CCUS) technologies applicability in concrete industry with a focus on direct air capture (DAC), CO2 curing, mineral carbonation, and incorporation of carbonated recycled aggregates and alternative binders. Emphasis is placed on the mechanisms of various CCUS technologies, economic feasibility, environmental benefits, mechanical performance, and current challenges in their application and scalability aiming to optimize the structural efficiency, carbon uptake, and cost of concrete structures. Case studies from industrial implementations, such …

Numerical Modeling Of Circular Reinforced Concrete Columns Confined With Frcm Composites, Ahmed Khaled Elzaher

Thesis/ Dissertation Defenses

Fabric-reinforced cementitious matrix (FRCM) composites are considered a promising alternative for strengthening reinforced concrete (RC) columns due to the noncorrosive nature of the fiber strands and the enhanced thermal resistance of the cementitious mortar. The interaction between the confinement provided by the internal steel ties and the external FRCM composites represents a key parameter that has not yet been thoroughly investigated. The complexity of this combined FRCM–steel confinement mechanism increases under eccentric compression loading, which is commonly encountered in practical applications. This study aimed to investigate the structural behavior of short circular RC columns confined with FRCM composites under concentric …

A Comprehensive Review Of Influence Of Critical Parameters On Wettability Of Rock-Hydrogen-Brine Systems: Implications For Underground Hydrogen Storage, Nurudeen Yekeen, Berihun Mamo Negash, Muhammad Ali, Ahmed Al-Yaseri, Surajudeen Sikiru

Research outputs 2022 to 2026

The rock wettability is one of the most critical parameters that influences rock storage potential, trapping, and H2 withdrawal rate during Underground hydrogen storage (UHS). However, the existing review articles on wettability of H2-brine-rock systems do not provide detailed information on complexities introduced by reservoir wettability influencing parameters, such as high pressure, temperature, salinity conditions, micro-biotic effects, cushion gases, and organic acids relevant to subsurface environments. Therefore, a comprehensive review of existing research on various parameters influencing rock wettability during UHS and residual trapping of H2 was conducted in this study. Literature that provides insight into molecular-level interaction through machine …

Development Of New Design Criteria For Coastal Highway Embankment Under Wave-Induced Loading, Udaya Bilas Panta

Master's Theses

In the face of intensifying hurricanes and rising sea levels, Louisiana’s coastal highways, lifelines for communities and commerce, stand increasingly vulnerable. This thesis introduces a pioneering methodology for designing geosynthetic-reinforced highway embankments capable of withstanding wave-induced loading and rapid drawdown scenarios, the most critical failure condition identified in coastal environments. By integrating statistical wave modeling, advanced numerical simulations using SEEP/W and SLOPE/W, and a comprehensive parametric analysis, the study develops a novel hybrid regression formula that accurately predicts optimal reinforcement lengths based on site-specific geotechnical and hydraulic parameters. Validated against Hurricane Katrina data and real-world soil profiles from Cameron Parish, …

Comparative Study Of Interfacial Bond Strength Of Steel H-Pile With Ultra-High Performance And Polymer Concrete Jacket, Binod Shrestha, Mohanad M. Abdulazeez, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigates the bond behavior of steel H-pile encased in concrete jackets under push-out loading, considering the effects of concrete type and embedment length. Nine full-scale specimens were tested using three concrete types: ultra-high-performance concrete (UHPC), Methyl Methacrylate Polymer Concrete (MMA-PC), and conventional concrete (CC), with embedment lengths of 63.5 mm, 127 mm, and 190.5 mm. The experimental results revealed that MMA-PC jacket demonstrated the highest bond strength, though gains were marginal beyond 127 mm. UHPC exhibited superior tensile strength and ductility, preventing splitting failure. UHPC also displayed the highest interfacial fracture energy of 9.63 N/mm, exceeding MMA-PC and …

Treatment Intensification Of Digester Dewatering Sidestreams Via Pilot- And Demonstration-Scale Revolving Algal Biofilms At Municipal Water Resource Recovery Facilities, Audrey E. Kocher, Hunter W. Schroer, Christopher A. Marks, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As water resource recovery facilities (WRRFs) pursue decarbonization, the treatment of concentrated side streams from anaerobic digestion offers a critical opportunity to reduce energy use and greenhouse gas emissions. This study evaluated the intensification potential of revolving algal biofilms (RAB) for side stream nutrient removal via partial nitrification at pilot- and demonstration-scales. RAB systems were deployed at municipal WRRFs in Boulder and Iowa City, treating real dewatering side streams across a range of ammonium (NH4⁺–N) surface area loading rates (SALR) reaching up to 196 g N m^–2d^–2. The results demonstrated that RAB systems can …

Integrated Optimization And Data-Driven Modeling For Seawater Intrusion Mitigation And Prediction, Assaad Hassan Kassem

Thesis/ Dissertation Defenses

Seawater intrusion (SWI) threatens the reliability of coastal groundwater especially in hyper-arid settings, where climatic stress and pumping accelerate salinization. This dissertation advances two complementary approaches to managing SWI: Part A optimizes mitigation measures, hydraulic (pumping/injection) and physical barriers (cutoff walls, subsurface dams) on benchmark models; Part B predicts SWI in the hyper-arid Fujairah (UAE) coastal aquifer using total dissolved solids (TDS) as a proxy, through machine learning-based models, spatially and dynamically. A bibliometric synthesis first maps the evolution of SWI models and mitigation strategies, identifying gaps that motivate the subsequent methodological developments. Part A employs the classical Henry problem …

Framework And Methodology For Risk-Based Bridge And Tunnel Asset Management: Risk-Based Asset Ranking And Corridor Prioritization, David Y. Yang, Arash Khosravifar, Diane Moug, Avinash Unnikrishnan

Civil and Environmental Engineering Faculty Publications and Presentations

This report presents the results of Phase II of the project, "Framework and Methodology for Risk-based Bridge and Tunnel Asset Management". The research was carried out at Portland State University in collaboration with engineers and officials at the Oregon Department of Transportation (ODOT) and Federal Highway Administration (FHWA). Using the framework and methodology developed in Phase I of the project, the primary goal of Phase II is to showcase the practical application in risk-based asset management. In particular, the report includes the following two case studies: Case Study I — Weighted hazard scenarios for seismic risk assessment of Oregon Highway …

Locations Of Outfalls In The Indian River Lagoon And Lake Worth Lagoon, Florida, Kelly M. Kibler, Melinda J. Donnelly, Vincent Encomio, Madison Giuntoli, Manisha Thenuwara, Brice Bennett, Laura Andrade Barron, Mariam Sonbol, Wynter Raine Seppala, Namritha Ramakrishnan, Jennifer Jordan Báez, Beth Orlando, Irene Arpayoglou, Melissa Meisenburg

Indian River Lagoon Shorelines

The spatial dataset: UCF_Outfalls_IRL_LWL.shp was created under grants from the Indian River Lagoon National Estuaries Program and Florida Sea Grant. These projects cumulatively led to creation of a living shoreline restoration prioritization model and hydrodynamic habitat suitability models for 1,550 km (963 miles) of estuarine shorelines in Indian River Lagoon (IRL) and Lake Worth Lagoon (LWL).

The dataset presented here includes the location of outfalls identified throughout the study region and general characteristics of the shoreline where they were identified.

Seagrass Persistence In The Indian River Lagoon And Lake Worth Lagoon, Florida, Kelly Kibler, Melinda Donnelly, Vincent Encomio, Madison Giuntoli, Manisha Thenuwara, Brice Bennett, Laura Andrade Barron, Mariam Sonbol, Wynter Raine Seppala, Namritha Ramakrishnan, Jennifer Jordan Báez, Beth Orlando, Irene Arpayoglou, Melissa Meisenburg

Indian River Lagoon Shorelines

The spatial dataset: UCF_seagrasspersistence_IRL_LWL.shp was created with support from the Indian River Lagoon National Estuaries Program and Florida Sea Grant. These projects cumulatively led to creation of a living shoreline restoration prioritization model and hydrodynamic habitat suitability models for 1,550 km (963 miles) of estuarine shorelines in Indian River Lagoon (IRL) and Lake Worth Lagoon (LWL). The dataset presented herein represents persistence of seagrass throughout waters of the IRL and LWL.

From The Editors, Rully Karim Dr.

Journal of Project Management & Construction

The Journal of Project Management and Construction (JPMC) is a peer-reviewed publication dedicated to advancing the field of project management and construction, grounded in the principles outlined in the PMBOK 6th Edition. Our focus encompasses the ten knowledge areas essential to successful project management: Integration, Scope, Schedule, Cost, Quality, Resource, Communications, Risk, Procurement, and Stakeholder Management.

JPMC publishes original research papers written in English that provide deeper insights into these knowledge areas and contribute to the development of best practices in project management and construction. Submissions may include theoretical analyses, computational models, experimental observations, or a combination of both theoretical …

Critical Success Factors Of Lean Construction Implementation To Improve Construction Project Efficiency In Indonesia, Onal Putra, Rossy Armyn Machfudiyanto

Journal of Project Management & Construction

Inefficiency is still a problem in the construction industry in Indonesia and in the world. Inefficiency leads to delayed deadlines, budget overruns, and inappropriate quality. It is caused by a lot of waste in the form of activities that use resources but do not produce the expected value. Lean construction is one approach to address this problem by eliminating waste and maximizing value for users or customers. This research aims to identify and determine the critical success factors that most influence the implementation of lean construction to improve the efficiency of construction projects in Indonesia as well as the development …

Development Of Knowledge Base Of Audit Process In High-Rise Building Works With Design-Build Contract Based On Iso 19011:2018 And Regulation Of The Minister Of Public Works And Housing No. 10 Of 2021, Zafira Alysha Fadli, Danang Budi Nugroho

Journal of Project Management & Construction

In achieving the long-term development goal of Advanced Indonesia, the Government continues to accelerate the completion of infrastructure development, such as strategic and priority projects that support economic transformation. Infrastructure development is still one of the main focuses of the Indonesian government, the 2024 state revenue and expenditure budget (APBN) is allocated to the infrastructure budget. The massive construction of high-rise buildings in Indonesia, the number of accidents is getting higher, so it is necessary to implement an audit process on construction work. The audit process is to know and monitor directly the procedures that have been applied optimally. Therefore, …

Dam Construction Project Planning: A Case Study Of Watershed Management In Poncol District, Fikrian Fajar Muhammad, Audy Christian Rayvano Kalalo

Journal of Project Management & Construction

Despite the rapid growth of infrastructure development in Indonesia, water resource management remains a major concern, especially in regions with high climate variability like Poncol District. This study aimed to identify and analyze the Watershed (DAS) in Poncol District, East Java, using a comprehensive approach integrating GIS technology and hydrology software. The Poncol watershed, covering 19,637 km², was mapped using DEMNAS maps and analyzed with flow direction and flow accumulation. Hydrological analysis via WinTR-20 included verification, sub-area identification, cross-sectional analysis, and storm analysis. Calibration results showed consistency between manual and digital methods, while land use analysis revealed significant impacts on …

Development Of Work Breakdown Structure (Wbs) Dictionary And Checklist Integrated With Building Information Modelling (Bim) On Concrete Bridge’S Care And Maintenance Work To Improve Maintenance Performance, Dina Benua Lalitya, Yusuf Latief

Journal of Project Management & Construction

According to The Ministry of Public Works and Public Housing of Republic of Indonesia (Kementerian PUPR), there was a significant decrease in national bridge condition in year 2021 compared to year 2018. One of the crucial factors that led to the collapse of the bridge was the lack of bridge management and maintenance to ensure the bridge’s serviceability. To cope with this condition, the solution needed is to carry out effective, efficient, and economical care and maintenance works. In bridge’s care and maintenance works, good project management can be improved with Work Breakdown Structure (WBS) and the use of integrated …

Great Lakes Water Levels: Curve Fitting, Statistics, And The Unacceptable-Value Statistical Approach, Brian Barkdoll

Michigan Tech Publications

Water levels in the Great Lakes fluctuate over time. Excessively high levels can cause flooding, erosion, property damage, and loss of human life. Excessively low values inhibit shipping since boats cannot reach the ports and docks due to low draft, thereby causing loss of economic resources. Water level prediction has proven elusive, thereby requiring a new approach to analyzing the historical record of water level values. Methods attempted here include curve fitting, conventional statistics, and a newly introduced Unacceptable-Value Statistical Approach (UVSA). The UVSA comprises only analyzing flooding and drought events. All remaining values are acceptable and, therefore, are not …

Wildfire Impact Analysis On Power System Operation: A Framework Leveraging Physics-Based Wildfire Simulation And Dynamic Line Rating, Saeed Nematshahi, Behrouz Sohrabi, Amin Khodaei, Ali Arabnya, Rui Fan

Electrical and Computer Engineering: Faculty Scholarship

The growing frequency and intensity of wildfires is significantly impacting power grid operations. Specifically, wildfires spreading to power lines can induce thermal stress, leading to a restriction in line capacity. This reduction imposes a challenge for electric utilities as they must supply electric demand while experiencing reduced transmission capacity. This paper introduces a model that simulates wildfire behavior in proximity to a transmission line, evaluates the impact on conductor temperature and capacity constraints, and subsequently analyzes the impact on grid operation from economic and reliability perspectives. The numerical studies conducted on the IEEE 14-bus test system assess both economic and …

Deep Reinforcement Learning Based Control For Enhanced Frequency Response With Multi-Energy Storage Systems, Abu Shouaib Hasan, Rui Fan, Wei Gao, Di Wu

Electrical and Computer Engineering: Faculty Scholarship

This paper proposes an advanced strategy for managing multiple battery energy storage systems (BESS) to enhance frequency support during contingencies. A novel deep reinforcement learning (DRL) framework based on a guided surrogate-gradient-based evolutionary strategy (GSES) was developed to dynamically regulate BESS outputs for rapid power injection or absorption. This approach effectively mitigates the rate of change of frequency (ROCOF) and stabilizes the system frequency under varying operating conditions. Parallel computing techniques are employed to accelerate training and ensure robust performance. In addition, a genetic algorithm is implemented to determine the placement of BESS within the grid network, strategically minimizing ROCOF …