Biomaterials Commons^™

Mesenchymal Stromal Cell Response To Degenerated Intervertebral Disc-Like Ph, Kyle Cannon

All Dissertations

Intervertebral disc degeneration (IVDD) has become increasingly prevalent and is a common contributing factor to low back pain. There are currently no clinical treatment options for IVDD that alleviate the symptoms of IVDD while simultaneously promoting repair of IVD tissue. One treatment option being explored is intradiscal administration of mesenchymal stromal cells (MSCs). However, the microenvironment of the degenerating IVD places significant stress on both native IVD cells and implanted cells. There are several questions that need to be addressed which may help further inform the development of efficacious intradiscal MSC therapies for IVDD. These questions include: 1) Do MSCs …

Novel Nucleus Pulposus Biomaterial Development And Low Field Mri Assessment For Intervertebral Disc Degeneration, Mario Krussig

All Dissertations

Intervertebral disc degeneration (IVDD) is a prominent pathology in the modern world that causes debilitating pain for many patients. The onset of IVDD occurs in the nucleus pulposus (NP). NP biomaterials will play a vital role in mitigating the progression of IVDD. Within this work, we sought to synthesize a solubilized extracellular matrix (ECM)-based NP biomaterial. Utilizing pepsin or urea extraction, bovine NP ECM was successfully solubilized (SBNPs). SBNP formulations were characterized biochemically, evaluated for cytotoxicity, and down-selected for front-running formulations. Leading candidate SBNPs were incorporated into an alginate bead biomaterial model to determine the potential bioactivity with human adipose-derived …

Tin-Silver As A Novel Biodegradable Metallic Biomaterial, Charley Goodwin

All Dissertations

The Essure device is a non-hormonal, minimally-invasive, permanent female sterilization implant, removed from the market due to an increase in adverse events, hypothesized to be caused by corrosion of the Sn-Ag component of the implant. The goals of this dissertation were to first develop implant retrieval methods for Essure devices and surrounding tissue, documenting signs of degradation and metallic degradation products, then to characterize the electrochemical behavior of Sn-Ag in biologically representative environments and finally, to assess the biological interaction of Sn-Ag. Retrieval analyses developed successful methods, qualifying the degree of corrosion, primarily of the Sn-Ag component and finding Sn …

Low Impedance, Durable, Self-Adhesive Hydrogel Epidermal Electrodes For Electrophysiology Recording, Naiyan Wu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Traditional electrodes used for electrophysiology recording, characterized by their hard, dry, and inanimate nature, are fundamentally mismatched with the soft, moist, and bioactive characteristics of biological tissues, leading to suboptimal skin-electrode interfaces. Hydrogel materials, mirroring the high water content and biocompatibility of biological tissues, emerge as promising candidates for epidermal electronic materials due to their adjustable physicochemical properties. However, challenges such as inadequate electrical conductivity, elevated skin impedance, unreliable adhesion in moist conditions, and performance decline from dehydration have significantly restricted the efficacy and applicability of hydrogel-based electrodes. In this thesis, we report a high-performance hydrogel epidermal electrode patch for …

Review Of The Potential Use Of Poly (Lactic-Co-Glycolic Acid) As Scaffolds In Bone Tissue Recovery, Kushendarsyah Saptaji, Asriyanti Asriyanti, Nisa Khoiriyah, Laely Muryanti, Iwan Setiawan

Makara Journal of Science

Scaffolds are used as temporary tissue in the human body to expedite healing. Biocompatible materials play a vital role in the field of tissue engineering. Therefore, they can be used to reduce human pain as soon as possible. Polymeric materials are widely used to replicate bone tissue. Poly(lactic-co-glycolic acid) (PLGA) is a potential material for bone tissue scaffolds because of its superior properties, including compatibility with the human body. Accordingly, adding hydroxyapatite and introducing different fabrication methods can enable the production of PLGA scaffolds with good abilities to help cells grow, expand, differentiate, and proliferate. The paper reviews the current …

Oral Administration Of Ph-Responsive Polymeric Nanoparticles Based On Zein And Their Therapeutic Potential On Cancer., Bruno Alejandro Valades-Aguilar, José Raúl Rangel-López, Jennifer Citlally Leos-Rivera, Moisés Armides Franco-Molina, María Cristina Rodríguez-Padilla, Diana Ginette Zárate-Triviño

Research Symposium

Background: Zein is a water-insoluble protein extracted from the endosperm of corn seeds, this polymer is an attractive matrix to encapsulate hydrophilic compounds because of its high proportion of hydrophobic amino acids, making it a potential smart delivery material for several treatments in the biopharmaceutical industry. nanoparticles have been used as drug delivery systems for the improvement of oral bioavailability; however, the strategies of nanoparticle obtention need the addition of stabilizers. in this study, a modified method to obtain zein nanoparticles was developed.

Methods: Zein nanoparticles (ZNps) were made by a thermal treatment and precipitated into ovalbumin at a ratio …

Engineering Nanofibers: Laboratory Characterization, Microstructural Analysis, And Image Processing Insights, Sayed Ahmadreza Razian, Mohammad Arjomandi, Kaspars Maleckis

UNO Student Research and Creative Activity Fair

Polymer nanofibers have attracted high interest in a wide array of applications, including biomaterial scaffolding, textiles, sensors, reinforcement in composites, and filtration systems. Many of these applications combine nanofibers into non-woven fabrics for better properties and easier manipulation. The properties and performance of nanofiber-based fabrics are affected by various microstructure parameters, including fiber alignment, diameter, and gap sizes between the nanofibers. These structural parameters can be controlled by adjusting various process parameters during manufacturing process, but the exact process parameter-microstructure relationships vary depending on the polymer system and need to be studied individually. The goal of this study is to …

Resolving The Nanoscale Structure Of Β-Sheet Peptide Self-Assemblies Using Single-Molecule Orientation–Localization Microscopy, Weiyan Zhou, Conor L. O'Neill, Tianben Ding, Oumeng Zhang, Jai S. Rudra, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Synthetic peptides that self-assemble into cross-β fibrils are versatile building blocks for engineered biomaterials due to their modularity and biocompatibility, but their structural and morphological similarities to amyloid species have been a long-standing concern for their translation. Further, their polymorphs are difficult to characterize using spectroscopic and imaging techniques that rely on ensemble averaging to achieve high resolution. Here, we utilize Nile red (NR), an amyloidophilic fluorogenic probe, and single-molecule orientation-localization microscopy (SMOLM) to characterize fibrils formed by the designed amphipathic enantiomers KFE8^L and KFE8^D and the pathological amyloid-beta peptide Aβ42. Importantly, NR SMOLM reveals the helical (bilayer) …

Spontaneous Alignment Of Myotubes Through Myogenic Progenitor Cell Migration, Lauren E. Mehanna, Adrianna R. Osborne, Charlotte A. Peterson, Brad J. Berron

Chemical and Materials Engineering Faculty Publications

In large-volume muscle injuries, widespread damage to muscle fibers and the surrounding connective tissue prevents myogenic progenitor cells (MPCs) from initiating repair. There is a clinical need to rapidly fabricate large muscle tissue constructs for integration at the site of large volume muscle injuries. Most strategies for myotube alignment require microfabricated structures or prolonged orientation times. We utilize the MPC’s natural propensity to close gaps across an injury site to guide alignment on collagen I. When MPCs are exposed to an open boundary free of cells, they migrate unidirectionally into the cell-free region and align perpendicular to the original boundary …

Nanoparticles For Applications In Specific Diagnostics And Precision Medicine, Naxhije Berisha

Dissertations, Theses, and Capstone Projects

Heterogeneity is common in the expression of cancer and treatment response. Precision medicine enables healthcare providers to tailor medical care to an individual's distinct genetic and environmental makeup. This customization has the potential to result in more efficient treatments while minimizing side effects. We believe that by studying the interface of nanotechnology and cancer medicine we can elucidate innovative solutions that address the challenges of disease heterogeneity. This includes advancements in drug delivery, formulations development, and diagnostic sensing. We highlight three studies that use nanotechnology for applications in precision medicine. In Chapter 2, we highlight design optimization of drug formulations …

Rational Design Of Peptide-Based Materials Informed By Multiscale Molecular Dynamics Simulations, Dhwanit Rahul Dave

Dissertations, Theses, and Capstone Projects

The challenge of establishing a sustainable and circular economy for materials in medicine and technology necessitates bioinspired design. Nature's intricate machinery, forged through evolution, relies on a finite set of biomolecular building blocks with through-bond and through-space interactions. Repurposing these molecular building blocks requires a seamless integration of computational modeling, design, and experimental validation. The tools and concepts developed in this thesis pioneer new directions in peptide-materials design, grounded in fundamental principles of physical chemistry. We present a synergistic approach that integrates experimental designs and computational methods, specifically molecular dynamics simulations, to gain in-depth molecular insights crucial for advancing the …

Pcl And Dmso2 Composites As Biomaterials For Additive Manufacturing, Jae-Won Jang

Dissertations and Theses

Tissue engineering provides a viable solution to address the shortage of organ donors for allograft transplants. Its primary objective is the replacement or regeneration of damaged tissues which is developed by combining living cells, a scaffold, and a bioreactor. Among these components, the scaffold serves as an artificial extracellular matrix (ECM), which plays a pivotal role in supporting cell adhesion, proliferation, differentiation, and overall tissue development. Additive manufacturing (AM), commonly referred to as three-dimensional (3D) printing, emerges as a promising method for scaffold fabrication due to its capability to create complex and repeatable geometries.

Polycaprolactone (PCL) has been one of …

Development Of Anti-Microbial Nanocoatings On Metallic Surfaces To Prevent Infections, Luis Fernando Soto Garcia

Bioengineering Dissertations - Archive

Healthcare-associated infections have a prevalence of about 7% in the United States and up to 50% in some developing nations. They not only present a constant risk for inpatients and healthcare workers but are also a serious challenge to human health services worldwide. These infections can be transmitted via contaminated non-critical surfaces like doorknobs and bedrails, which are routinely cleaned with low-level disinfectants approved by the U.S. Environmental Protection Agency. However, this strategy has limited efficacy since recontamination occurs, resulting in these surfaces again becoming vectors of infection. In this work, we addressed this issue by developing a self-disinfecting nanocomposite …

Insights Into The Characterization And Degradation Of Electrospun Polycaprolactone Scaffolds For Tissue Engineering Applications, Caleb B. Wells

Theses and Dissertations

Electrospun polymeric biodegradable scaffolds are essential in tissue engineering, particularly for Engineered Tissue Vascular Grafts (ETVGs), which promise advancements in treating coronary artery disease, peripheral arterial disease, congenital cardiovascular defects, and renal disease. These scaffolds present a solution to issues with autologous graft availability and durability. While large-diameter grafts in low-pressure environments have seen success, small-diameter grafts in high-flow scenarios remain challenging. Understanding polymeric scaffold degradation and behavior during incubation, especially under dynamic mechanical loading, is vital for clinical translation of small-caliber ETVGs.

This research focuses on characterizing the mechanical and microstructural properties of electrospun polycaprolactone (PCL) scaffolds and their …

Development Of Iron Oxide Nanozyme For Cancer Therapy, Zhongchao Yi

Theses and Dissertations--Biomedical Engineering

Cancer therapies that leverage reactive oxygen species (ROS) have shown potential for cancer inhibition due to their ability to induce oxidative stress in tumor cells. Iron oxide nanoparticles (IONPs) have garnered significant attention as a promising platform for ROS-dependent disease treatment, owing to their remarkable biocompatibility and Fenton catalytic activity. However, the low catalytic activity of IONPs has been a major hurdle in their clinical translation. To overcome this challenge, IONPs of different compositions are examined for their Fenton reaction under pharmacologically relevant conditions in this work. The results show that wüstite (Fe_1-xO) nanoparticles exhibit higher catalytic activity …

Mobile Robot Adhesion Methodology And Development Of An Automatous Robot Module, Lauren Baird, Zachariah Stone, Madison Lemons, Jonathon Moody

Williams Honors College, Honors Research Projects

Due to the increasing availability of space travel as not only a scientific exploration but a commercial exploration, there is a need for an onsite repair station that can be deployed in the event of aircraft maintenance, damage, or failure. We have been tasked with researching and creating a prototype of an automatous robot that can be attached to a spacecraft body, move along the surface while avoiding obstacles, scan for damage, 3D print a repair piece, and then make the repair, all without the need of direct human input. Our team, as will be discussed throughout, was tasked with …

Engineering Mussel Foot Protein 5 (Mfp5) For Enhanced Adhesive Performance In Tendon And Bone Repair, Ziyue Zhu

McKelvey School of Engineering Graduate Student Theses & Dissertations

This study explores the development of Mussel Foot Protein 5 (MFP5) bioadhesives to improve tendon-to-tendon and tendon-to-bone adhesive outcomes. MFP5, known for its underwater adhesive properties, was synthesized using recombinant techniques and optimized through coacervation and cross-linking. Adhesion tests demonstrated the superior performance of the optimized MFP5 adhesive on the tendon and bone samples. Improved protein concentration testing and purification methods enhanced MFP5 yield and consistency. Future research will focus on further standardization, exploring alternative purification methods, and evaluating the adhesive's performance in animal models. This study lays a foundation for developing robust MFP5-based bioadhesives, potentially revolutionizing surgical repair techniques …

4d Epr Oximetry Imaging For 4d Bioprinting And Tissue Engineering, Sajad Sarvari

Graduate Theses, Dissertations, and Problem Reports (ETD)

Bioprinting, akin to 3D printing, employs cell-laden hydrogels such as GelMA (Gelatine Methacrylate) and Alginate instead of plastic or resin to create biological structures. The printing process followed by subsequent tissue maturation is known as 4D bioprinting, where the fourth dimension is time. Ensuring adequate and consistent oxygen, O2, supply within 3D bioprint volume over the entire maturation period process is crucial, as even transient hypoxia can impact cellular behavior and phenotypes. However, printing of fully developed vasculature remains an unresolved technical challenge. Several approaches to chemically (peroxides) or biologically (photosynthesis) generate oxygen during bioprint maturation have been proposed. However, …

Degradable Staples And Delivery Device, Meha Elango, Jessica Cabrera, Makayla Scarpitti, Kareemat Melaiye

Williams Honors College, Honors Research Projects

The scope of this project is to design a method to secure skin grafts to healthy tissue. The ultimate goal for the proposed method is to be dissolvable in some form. Currently, skin grafts procedures utilize staples in most cases to hold a skin graft in place, but there are disadvantages that come with it. Staples are easy to place, but time consuming during the removal procedure. They also cause a lot of pain and discomfort for the patient. The goal of this project is to determine a way a secure skin grafts to healthy skin in order to reduce …

Development Of Glutathione-Responsive Disulfide-Containing Poly(Beta-Amino Esters) With Varied Hydrophilicity And Acrylate Functionality, Anastasiia Aronova

Theses and Dissertations--Chemical and Materials Engineering

Smart biomaterials are becoming promising for therapeutic deliveries due to their ability to respond to changes in the environment. Redox-responsive hydrogels are a promising type of smart polymer that can swell and degrade according to cellular oxidative stress levels. Glutathione, abundant in cells, is crucial in redox-responsive biomaterials, serving as a key reactive molecule. This study explored the degradation kinetics of glutathione-responsive poly(β-amino ester) (PBAE) polymers created through a single-step Michael addition. We examined how disulfide content influences the degradation kinetics of these PBAE networks. Additionally, we investigated how the hydrophilicity and functionality of acrylate affect the degradation of disulfide-containing …

Sustained Release Systems For Endometrial Cancer, Claire E. Rowlands

Theses and Dissertations--Chemical and Materials Engineering

Endometrial cancer (EC) is the sixth most common cancer in women worldwide and is the most common cancer of female reproductive organs. From 2007-2016 there has been a global rise in incidence of EC of 1.3 %. Typically, EC is treated with surgery, but at later stages surgery is less effective requiring chemotherapy and/or radiation therapy. These treatment options are less effective than surgery and there are very few FDA approved chemotherapies for EC. The minuscule number of effective treatment options as well as an increase in incidence shows the need for creating improved treatments for EC. There has been …

Evaluation Of Silk Fibroin And Hylauronic Acid As Otic Drug Delivery System Additives; Investigation Of Silk Fibroins Responses To Enviromental Stimulii, Kolton Charles Sandau

Graduate Student Theses, Dissertations, & Professional Papers

The Serban lab has previously developed and reported on a single application drug delivery system for the treatment of otitis externa. Otitis externa also known as outer ear infections is a very common ailment that impacts large portions of both human and domestic animal populations. Typical treatment for otitis externa typically requires an extended dosing regimen over several days that is inconvenient and can lead to poor clinical outcomes due to poor patient compliance. Our delivery system employs a thixotropic gel to deliver a steady dose of medication over the duration of the infection.

Here we evaluated the reproducibility and …

Muscle-Nerve Signaling And Its Role In Myogenesis, Synaptogenesis, And Regeneration, James T. Redden

Theses and Dissertations

Despite only comprising 0.1% of the myofiber surface area, a healthy motor endplate is densely packed with acetylcholine receptors (AChRs) responsible for mediating activity between the connected motor neuron and skeletal muscle via the neurotransmitter, acetylcholine. Loss of the endplate, known as fragmentation, is caused by car crashes, deep lacerations, and other traumatic injuries to the innervating nerve or direct injuries to the limb muscle(s) with intramuscular denervation as a common comorbidity. In both cases, endplate fragmentation begins within a week of injury proceeding muscle atrophy causing decreased mobility, paralysis, and quality of life. Endplate fragmentation of intact muscle fibers …

Matrix Stiffness Sensing By Nascent Adhesions And The Role Of Riam In Adhesion Assembly, Nikhil Mittal

Dissertations, Master's Theses and Master's Reports

Mechanical stiffness of the extracellular matrix (ECM) impacts many cellular functions such as proliferation, migration, and differentiation. ECM stiffness is sensed by a cell via integrin-based focal adhesions (FAs) by changing conformation and biochemical activities of molecules within FAs by the exchange of the force between the ECM and filamentous actin (F-actin). Cells in turn respond to this stiffness by generating traction force that plays an important role in many biological events such as tissue morphogenesis, stem cell differentiation, wound healing, and cancer cell metastasis. The stiffness of the extracellular matrix induces differential tension within integrin-based adhesions. Understanding stiffness sensing …

Multi-Functional Gelatin-Dithiolane Hydrogels For Tissue Engineering, Saad Asim

Dissertations, Master's Theses and Master's Reports

Biomaterials that integrate multiple functionalities, mimic the extracellular matrix (ECM) microenvironment to support cellular growth, and adhere robustly to damaged tissues are highly needed to advance tissue engineering. Protein-based biomaterials are promising due to their inherent biocompatibility, biomimicry, biodegradation, and cell-supportive properties. Herein, by leveraging the unique ability of dithiolanes to generate on-demand in-situ thiols, we developed a new class of dithiolane-modified, protein-based biomaterial that combines unique, seemingly opposing functions for tissue engineering. Dithiolane-modified gelatin, a model protein used herein, enabled photoinitiator-free photo-crosslinking to form multi-functional gelatin-dithiolane (GelDT) hydrogels, which displayed exceptional long-term stability in cell culture media (>28 …

Borophene And Graphene For Non-Enzymatic Biosensor- Ab-Initio Study, Omar A. Ismail

Theses and Dissertations

Non-enzymatic glucose sensing holds promise to overcome limitations associated with glucose oxidase, such as oxygen dependence and short shelf life. This study explores the potential sensing capabilities of borophene and graphene through direct interaction with various compounds, including β-glucose, uric acid, ascorbic acid, fructose, and acetaminophen. Using Density Functional Theory (DFT), we calculated binding energies and the respective Density of States (DOS) for these adsorbates on both graphene and borophene surfaces. Preliminary results suggest that borophene might exhibit nearly twice the affinity for β-glucose compared to graphene. Moreover, the calculated Density of States reveals distinct distortions in the electronic states …

Adjuvant Pluronic F68 Is Compatible With A Plant Root-Colonizing Probiotic, Pseudomonas Chlororaphis O6, Amanda R. Streeter, Anthony Cartwright, Mohammad Zargaran, Anagha Wankhade, Anne J. Anderson, David W. Britt

Biological Engineering Faculty Publications

Plant probiotic bacteria are being increasingly used to maximize both the productivity and quality of field crops. Pseudomonas chlororaphis O6 (PcO6) is a plant root colonizer with probiotic activities. This bacterium produces an array of metabolites, including a group of phenazines that are functional in plant protection. The paper reports responses of PcO6 to a nonionic triblock copolymer surfactant, Pluronic F68. This Pluronic exhibits membrane "healing" activity and improves cryopreservation recovery in eukaryotic cells. The product is FDA-approved and is applied as an adjuvant in formulations used in agriculture, medicine, and biotechnology. Growth of PcO6 on …

Getting Off On The Right Foot: Addressing Severe Lymphedema Through A Novel Shoe Design, Carl R. Russell Iii, Anjollie M. Ramakrishna, Christopher H. Johns Iii, Alana V. Van Wijnen

Purdue Journal of Service-Learning and International Engagement

Engineering Projects in Community Service (EPICS) is a service-learning design program run by the College of Engineering at Purdue University. EPICS teaches students design skills by providing solutions for individuals, communities, and organizations in the surrounding area while mirroring engineering industry standards. Biomedical Engineering is a team within EPICS that strives to serve community partners through biomedical applications. HR is a patient who suffers from severe lymphedema. This condition results in her foot swelling three times its original size and requires her to utilize weekly leg compression therapy. Prescription shoes are slightly adequate. However, they lead to sores and pain …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Evaluation Of Polyvinyl Alcohol (Pva) For Electrospinning Utility In The Blood Vessel Mimic (Bvm) Lab, Logan Vandenbroucke

Master's Theses

Electrospinning has provided the opportunity to create extracellular matrix (ECM) mimicking scaffolds for the development of tissue-engineered constructs. Within Professor Kristen Cardinal’s Blood Vessel Mimic (BVM) Lab, at Cal Poly, there exists a constant demand for innovation and the expansion of polymer types and electrospinning capabilities for its BVM model. Along these lines, the BVM Lab has recently acquired two new electrospinning systems: the Spinbox, a commercially graded electrospinning system, and the Learn-By-Doing system, which was part of a recently completed thesis conducted by Jason Provol. Additionally, recently published literature has demonstrated polyvinyl alcohol (PVA) as a viable option for …