Biomaterials Commons^™

Sustainable Cow Dung Bricks: An Innovative Approach To Eco-Friendly Masonry With Enhanced Thermal And Mechanical Performance, Nagesh Sugandhi, Sachin Patil, Satish Reddy, Ashwini G, Santosh Kumar

Journal of Sustainable Construction Materials and Technologies

This study explores the development, characterization, and performance of sustainable cow dung bricks using locally sourced organic (cow dung) and mineral (clay, quartz sand, feldspar, lime) constituents for non-load-bearing masonry in India. Three blends with varying cow dung content (70%, 75%, 80%) were mixed, molded, air dried, and cured without kiln firing to reduce environmental impact. The bricks' mechanical properties—compressive strength, water absorption, bulk density, flexural strength, shore hardness, and modulus of elasticity—were systematically evaluated with complete statistical documentation (n = 6 replicates per formulation per test age). Microstructural features were investigated using Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray …

The Utilization Of Basic Oxygen Furnace Slag As Fine Aggregates In Concrete: Physical, Mechanical, And Durability Properties, Hakan Ozkan

Journal of Sustainable Construction Materials and Technologies

This study examines the feasibility of using basic oxygen furnace slag (BOFS) as an alternative to fine crushed limestone aggregate in concrete. BOFS is sourced from two steel production facilities in Türkiye, designated as I-BOFS and E-BOFS. The experimental results showed that as the E-BOFS aggregate replacement ratio increased, the water-to-cement (w/c) ratio increased to maintain the target workability. The concrete mixtures incorporating E-BOFS exhibited consistent reductions in the compressive strength with an increase in the BOFS ratio. At the same time, I-BOFS maintained higher compressive strength, with only minor losses up to 80% of the substitution ratio. Flexural strength …

Naoh Molarity Effect On Mechanical And Hydrochloric Acid Resistance Of Geopolymer Mortar Based On Slag, Mahmoud Ziada, Zahraa Mohammed Kamil Al-Mayali

Journal of Sustainable Construction Materials and Technologies

The present research investigates the influence of different sodium hydroxide (NaOH) molarities on the mechanical characteristics and hydrochloric acid (HCl) resistance of geopolymer grouts manufactured from ground granulated blast-furnace slag (GGBS). Geopolymer mortars have attracted interest as sustainable substitutes for traditional cementitious materials due to their advantageous environmental effects and enhanced durability features. This study involved the fabrication of geopolymer mortar specimens by altering the NaOH molarity (M) from 6 M to 14 M. The mechanical and physical qualities were assessed using compressive strength, capillary water absorption, flexural strength, slump flow, and ultrasonic pulse velocity (UPV) tests. Subsequently, the geopolymer …

Synergistic Effect Of Alccofine As Partial Replacement Of Cement And M-Sand As Sand Substitution In Concrete For The Assessment Of Mechanical And Microstructural Properties, Yellinedi Madhavi, R.S. Ravichandran, J. Saravanan, N. Venkatasairam Kumar

Journal of Sustainable Construction Materials and Technologies

Using supplementary cementitious materials (SCMs) and traditional binder mass has revolutionized concrete production technology in the building industry. This study examines how Alcofine-1203 affects the microstructure and mechanical characteristics of concrete. The mechanical qualities of the mixtures were evaluated using six different mixes prepared for each M25 and M40 Grade. In the proposed mixes, cement is substituted with alccofine at 0 to 25% and M-Sand as fine aggregate. The Compressive strength and ultrasonic pulse velocity were assessed after 3, 7, 14, 28, 56, and 90 days of curing, and split tensile strength and flexure strength were evaluated after 28 and …

Effect Of Reinforcement Thickness And Content On The Properties Of Compressed Earth Blocks, Salah Eddine Mokeddem, Abdelmadjid Hamouine, Rabia Abdeldjebar, Atef Hamaidi

Journal of Sustainable Construction Materials and Technologies

This study explores the mechanical, hygroscopic, and thermal behavior of stabilized and unstabilized compressed earth blocks (CEB) by incorporating date palm wood chips (DPWC) as a natural fiber additive. The investigation covers a range of DPWC thicknesses (1 mm, 2 mm, 3 mm) and content variations (0% to 1% by weight), focusing on the interaction between the bio-based reinforcement and the stabilized soil matrix, which is stabilized with 10% white Portland cement. The mixtures were compressed at a pressure of 5 MPa using a hydraulic press, providing a detailed examination of how these parameters impact the structural integrity and functional …

Insect Antennae As Bioinspirational Superstrong Fiber-Based Microfluidics, Griffin J. Donley

All Theses

Nature is frequently turned to for inspiration for the creation of new materials. Insect antennae are hollow, blood-filled fibers with complex shape, and are cantilevered at the head. The antenna is muscle-free, but the insect can controllably flex, twist, and maneuver it laterally. To explain this behavior, a comparative study of structural and tensile properties of the antennae of Periplaneta americana (American cockroach), Manduca sexta (Carolina hawkmoth), and Vanessa cardui (painted lady butterfly) was performed. These antennae demonstrate a range of distinguishable tensile properties, responding either as brittle fibers (Manduca sexta) or strain-adaptive fibers that stiffen when stretched (Vanessa cardui …

Development Of B-Type And Multi-Ion Doped Carbonated Hydroxyapatite Bioceramics, Safarzadeh Marjan

Student Works (2020-2029)

The present research is aimed to investigate the effect of varying the carbonate to phosphate (CO32−/ PO43‒) molar ratios from 0.5 to 5 on the physical and mechanical properties of carbonated hydroxyapatite (CHA) synthesized by a wet chemical method. The sintering was performed under dry carbon dioxide atmosphere at 900 °C to maintain the B-type CHA structure. It was found that increases in CO32−/ PO43‒ ratio was accompanied by an increase in the c/a lattice ratio. The diffraction peaks of the synthesized 0.5-5 CHA powders exhibited a single phase material except for 5CHA which revealed the some minor calcite or …

Characterization Of Fibrin Matrix Incorporated Electrospun Polycaprolactone Scaffold, Cho Yi Wong

Theses and Dissertations

Specific objective: Guided tissue regeneration (GTR) aims to regenerate the lost attachment apparatus caused by periodontal disease through the use of a barrier membrane. For the GTR procedures to be successful, barrier membranes are required to be present at the surgical site for an extended period of time (weeks to months). Synthetic membranes have the advantage of prolonged presence in a wound site; however, they do not actively contribute to wound healing. Biologic membranes are recognized by the host tissue and participate in wound healing but have the disadvantage of early resorption. Therefore, the goal of this study is …

Influence Of Nb On The Β → Α″ Martensitic Phase Transformation And Properties Of The Newly Designed Ti-Fe-Nb Alloys, Shima Ehtemam-Haghighi, Yujing Liu, Guanghui Cao, Lai-Chang Zhang

Research outputs 2014 to 2021

A series of Ti-7Fe-xNb (x = 0, 1, 4, 6, 9, 11 wt.%) alloys was designed and cast to investigate the β → α″ martensitic phase transformation, β phase stability, the resulting microstructure and mechanical properties. Phase analysis revealed that only Ti-7Fe-11Nb alloy shows a single body-centred cubic β phase microstructure while the others are comprised of β and orthorhombic α″ phases. Moreover, Nb addition up to 11 wt.% enhances the stability and volume fraction of β phase in the microstructure, hence reducing the propensity of the alloy system to form α″ phase during quenching. Compressive yield strength and hardness …

Layered, Flexible Drug Delivery Films For The Prevention Of Fibrotic Scar Tissue Formation, Cheryl L. Rabek

Theses and Dissertations--Biomedical Engineering

Open wounds account for about 50% of military injuries and 10% of non‐fatal traffic injuries. Scar tissue formation in these wounds may be reduced or prevented if treated with a combination of molecules whose release is tuned to the healing phases. The goal of this research was to develop flexible, layered drug delivery films for sequential, localized release of anti‐inflammatory, anti‐oxidant, and anti‐fibrotic molecules to soft tissue.

Films were composed of cellulose acetate phthalate (CAP) and Pluronic F‐127 (Pluronic). To impart flexibility, plasticizers, triethyl citrate (TEC) or tributyl citrate (TBC), were added. Mechanical analysis was performed on films as prepared …

Mechanical Properties Of Bone Due To Sost Expression: Nanoindentation Assessment Of Murine Femurs, Amir Rafie

Master's Theses

In the human genome, the SOST gene codes for a protein sclerostin. Sclerostin is an osteocyte-expressed negative regulator of bone formation. When the SOST gene is not coded, bone formation is reduced in individuals during skeletal maturation. This study utilizes nanoindentation methods to test for the mechanical properties of bones that both express and do not express the SOST gene. 100 transgenic murine femurs were obtained from Lawrence Livermore Labs in the form of 6 and 8 month SOST transgenic mice, 6 and 12 month SOST knockout mice, and wild type control littermates for each of the 4 age groups. …