Biomaterials Commons^™

Novel Electrospinning Techniques For Fabricating Scaffolds To Model Intracranial Atherosclerotic Disease In Tissue Engineered Blood Vessel Mimics, Isaac "Squeaky" Buentipo

Master's Theses

Novel Electrospinning Techniques for Fabricating Scaffolds to Model Intracranial

Atherosclerotic Disease in Tissue Engineered Blood Vessel Mimics

Isaac “Squeaky” Buentipo

Dr. Kristen Cardinal’s Tissue Engineering Lab at California Polytechnic State University specializes in fabricating customized vascular models, known as Blood Vessel Mimics (BVMs), for medical device testing. BVMs are simplified in vitro vascular models designed to bridge the gap between bench testing and in vivo evaluation of intravascular medical devices. BVMs are produced by combining a polymer scaffold with human vascular cells. Through novel scaffold fabrication techniques, such as silicone injection molding, silicone dip casting and electrospinning, the capabilities of …

Fabricating Silver-Ceria Polymer Nanocomposite Scaffolds For Biomedical Therapeutic Applications, Shreya S. Pawar

Honors Undergraduate Theses

Improper healing of bone fractures and limited regeneration of bone following bone tumor resection remain a prevalent complication worldwide. Long-term effects of this include joint instability, limited movement, and arthritis. Bone infections (osteomyelitis), reactive oxygen species (ROS) generation via excessive inflammation, and underlying conditions such as osteoporosis can contribute to suboptimal bone tissue regeneration. ROS accumulation stimulates osteoblast apoptosis, while promoting osteoclast differentiation. These processes inhibit mineralization and osteogenesis. Conventional therapeutics involve the utilization of drugs and bone grafts. However, these approaches pose limitations and can result in subsequent complications. Microbial infections, ROS accumulation, and excessive inflammations are factors that …

Insights Into The Characterization And Degradation Of Electrospun Polycaprolactone Scaffolds For Tissue Engineering Applications, Caleb B. Wells

Theses and Dissertations

Electrospun polymeric biodegradable scaffolds are essential in tissue engineering, particularly for Engineered Tissue Vascular Grafts (ETVGs), which promise advancements in treating coronary artery disease, peripheral arterial disease, congenital cardiovascular defects, and renal disease. These scaffolds present a solution to issues with autologous graft availability and durability. While large-diameter grafts in low-pressure environments have seen success, small-diameter grafts in high-flow scenarios remain challenging. Understanding polymeric scaffold degradation and behavior during incubation, especially under dynamic mechanical loading, is vital for clinical translation of small-caliber ETVGs.

This research focuses on characterizing the mechanical and microstructural properties of electrospun polycaprolactone (PCL) scaffolds and their …

Air-Jet Bioprinting Of Stem Cell-Encapsulated Alginate Micro-Droplets For Organoid Biomanufacturing, Mirabella B. Stump

Electronic Theses and Dissertations

Biomanufactured 3D-organoids show promise for modeling and treating various conditions, particularly insulin-dependent diabetes mellitus (type-1 diabetes). Pancreatic islet organoids serve as sustainable sources of insulin-producing β-cells, potentially restoring insulin regulation in patients and providing a long-term solution for diabetes. Hydrogel droplet printing is an emerging technique in regenerative medicine due to its advantageous tunability and biocompatibility; however, challenges of consistency, quality control, and scalability persist. To address these issues, we developed a novel air-jetting based droplet bioprinting system for the generation of monodispersed alginate micro-droplets. The objective of this project was to incorporate human induced pluripotent stem cells (hiPSCs) into …

Evaluation Of Polyvinyl Alcohol (Pva) For Electrospinning Utility In The Blood Vessel Mimic (Bvm) Lab, Logan Vandenbroucke

Master's Theses

Electrospinning has provided the opportunity to create extracellular matrix (ECM) mimicking scaffolds for the development of tissue-engineered constructs. Within Professor Kristen Cardinal’s Blood Vessel Mimic (BVM) Lab, at Cal Poly, there exists a constant demand for innovation and the expansion of polymer types and electrospinning capabilities for its BVM model. Along these lines, the BVM Lab has recently acquired two new electrospinning systems: the Spinbox, a commercially graded electrospinning system, and the Learn-By-Doing system, which was part of a recently completed thesis conducted by Jason Provol. Additionally, recently published literature has demonstrated polyvinyl alcohol (PVA) as a viable option for …

A Magneto-Rheological Platform To Dynamically Control Afterload In Engineered Micro Heart Muscles, David Schuftan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Cardiovascular disease is the leading cause of death is the United States, accounting for nearly 1 in 5 deaths. Many types of cardiovascular disease are linked to the mechanical forces placed on the heart. However, how these mechanical forces exactly affect the cellular biology of the heart is not well defined. In vitro models using cardiomyocytes derived from human induced pluripotent stem cells enable researchers to develop medium throughput systems to study cardiac mechanobiology at the cellular level. Previous models have been developed to enable the study of mechanical forces such as cardiac afterload. However, most of these models require …

Developing Aligned Nerve Scaffolds In A 3d Type-I Collagen Gel, Gabriel David

Biomedical Engineering Undergraduate Honors Theses

Despite significant progress in the field of peripheral nerve repair, clinical success is still limited, leaving millions to suffer from peripheral neuropathy with billions spent every year for treatment. Nerve repair methods that are capable of maximizing the regenerative properties of peripheral nerves are greatly desired in the field of medical science. This research aims to fill the gap between modern methods and the future of nerve repair by creating type-I collagen scaffolds with aligned degradation pores that will assist and nurture nerves growing through them. This is achieved by incorporating adipose stem cells into type-I collagen hydrogels and aligning …

Peptoid-Based Microsphere Coatings For Biomaterial Applications, Jesse Leland Roberts

Graduate Theses and Dissertations

Peptoids are peptidomimetic oligomers that predominantly harness similarities to peptides for biomimetic functionality. The incorporation of chiral, aromatic side chains in the peptoid sequence allows for the formation of distinct secondary structures and self-assembly into supramolecular assemblies, including microspheres. Peptoid microspheres can be coated onto substrates for potential use in biosensor technologies, tissue engineering platforms, and drug-delivery systems. They have the potential for use in biomedical applications due to their resistance to proteolytic degradation and low immunogenicity. This dissertation focuses on the physical characteristics and robustness of the peptoid microsphere coatings in various physiological conditions, along with their ability to …

Development Of An Injectable Methylcellulose Hydrogel System For Nucleus Pulposus Repair And Regeneration, Nada A. Haq-Siddiqi

Dissertations and Theses

Low back pain is the most common cause of disability in the world and is often caused by degeneration or injury of the intervertebral disc (IVD). The IVD is a complex, fibrocartilaginous tissue that allows for the wide range of spinal mobility. Disc degeneration is a progressive condition believed to begin in the central, gelatinous nucleus pulposus (NP) region of the tissue, for which there are few preventative therapies. Current therapeutic strategies include pain management and exercise, or surgical intervention such as spinal fusion, none of which address the underlying cause of degeneration. With an increasingly aging population, the socioeconomic …

Design Of An Affordable Rotating Drum Electrospinner For Classroom Education, Peder Solberg

The Journal of Undergraduate Research

Electrospinning is a technology used to generate small fibers down to nano-scale size. This method of fiber creation has been around for many years. However, in recent years electrospinning has found increased applications, especially in the area of tissue engineering due to its ability to create fibers with properties similar to the extracellular matrix in tissue. An electrospinning platform can illustrate concepts of engineering, electro-mechanical system design, manufacturing, and biomedical applications in one single package. Hence, it provides an excellent opportunity to integrate into secondary (middle and high school) and post-secondary (undergraduate) technology education.

Furthermore, just as integration of 3D …

Artificial Synthetic Scaffolds For Tissue Engineering Application Emphasizing The Role Of Biophysical Cues, Samerender Nagam Hanumantharao

Dissertations, Master's Theses and Master's Reports

The mechanotransduction of cells is the intrinsic ability of cells to convert the mechanical signals provided by the surrounding matrix and other cells into biochemical signals that affect several distinct processes such as tumorigenesis, wound healing, and organ formation. The use of biomaterials as an artificial scaffold for cell attachment, differentiation and proliferation provides a tool to modulate and understand the mechanotransduction pathways, develop better in vitro models and clinical remedies. The effect of topographical cues and stiffness was investigated in fibroblasts using polycaprolactone (PCL)- Polyaniline (PANI) based scaffolds that were fabricated using a self-assembly method and electrospinning. Through this …

Engineering The Alveolar Gas Exchange Barrier With Extracellular Matrix Coatings For Bioengineered Lungs, Bethany M. Young

Theses and Dissertations

Lower respiratory diseases are currently the third leading cause of death worldwide. For many end-stage patients with these diseases, there is no cure and a shortage of donor organs available for transplant. A promising solution is to design regenerative scaffolds or complete bioengineered lungs, using decellularized lung tissues as a template for regeneration. Recent advances in the field have made significant strides towards developing a transplantable lung. However, the current technology has not produced a functional lung for in vivo transplant due to immature gas exchange barriers. The mechanisms driving alveolar barrier maturation and role that extracellular matrix (ECM) plays …

Chemically Modified Monolayer Surfaces Influence Valvular Interstitial Cell Attachment And Differentiation For Heart Valve Tissue Engineering, Matthew N. Rush

Nanoscience and Microsystems ETDs

As a cell mediated-process, valvular heart disease (VHD) results in significant morbidity and mortality world-wide. In the US alone, valvular heart disease VHD is estimated to affect 2.5% of the population with a disproportionate impact on an increasing elderly populous. It is well understood that the primary driver for valvular calcification is the differentiation of valvular interstitial cells (VICs) into an osteoblastic-like phenotype. However, the factors leading to the onset of osteoblastic-like VICs (obVICs) and resulting calcification are not fully understood and a more complete characterization of VIC differentiation and phenotypic change is required before treatment of valve disease or …

Ultrasonically Responsive Tissue Engineering Scaffolds For The Temporal Control Over Osteo-Inductive Growth Factor Delivery, Catherine Linh

Senior Honors Projects

In 2012, approximately 6.8 million people in the United States were diagnosed with orthopedic injuries or diseases. Over 500,000 people in the United States underwent bone grafting procedures, which cost 2.5 billion dollars per year and can result in complications. Polymer-based grafting scaffolds can facilitate 3D bone tissue growth in a localized, sustained manner. However, bone regeneration requires the orchestration of a sequence of events. Current scaffolds based on degradation and diffusion cannot provide sequential deliveries. We aimed to design a polymer scaffold that can release one payload diffusively at early time points, followed by ultrasonically triggered release of a …

Alginate Hydrogels As Three-Dimensional Scaffolds For In Vitro Culture Models Of Growth Plate Cartilage Development And Porcine Embryo Elongation, Taylor D. Laughlin

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The establishment of in vitro culture models utilizes tissue engineering principles to design functional mimics of in vivo environments in vitro. Advantages for the use of in vitro culture models include ethical alleviation of animal models for therapeutic testing, cost efficiency, and a greater ability to study specific mechanisms via a systematic, ground-up approach to development. In this thesis, alginate hydrogels are utilized in the development of in vitro culture models of porcine embryo elongation and growth plate cartilage development. First, the effect of scaffold and modifications to the scaffold were explored in both projects. In order to modulate …

Polysaccharide-Based Shear Thinning Hydrogels For Three-Dimensional Cell Culture, Vasudha Surampudi

Theses and Dissertations

The recreation of the complicated tissue microenvironment is essential to reduce the gap between in vitro and in vivo research. Polysaccharide-based hydrogels form excellent scaffolds to allow for three-dimensional cell culture owing to the favorable properties such as capability to absorb large amount of water when immersed in biological fluids, ability to form “smart hydrogels” by being shear-thinning and thixotropic, and eliciting minimum immunological response from the host. In this study, the biodegradable shear-thinning polysaccharide, gellan-gum based hydrogel was investigated for the conditions and concentrations in which it can be applied for the adhesion, propagation and assembly of different mammalian …

Characterization And Implementation Of A Decellularized Porcine Vessel As A Biologic Scaffold For A Blood Vessel Mimic, Aubrey N. Smith

Master's Theses

Every 34 seconds, someone in the United States suffers from a heart attack.  Most heart attacks are caused by atherosclerotic build up in the coronary arteries, occluding normal blood flow.  Balloon angioplasty procedures in combination with a metal stent often result in successful restoration of normal blood flow.  However, bare metal stents often lead to restenosis and other complications.  To compensate for this problem, industry has created drug-eluting stents to promote healing of the artery wall post stenting.  These stents are continually advancing toward better drug-eluting designs and methods, resulting in a need for fast and reliable pre-clinical testing modalities. …

An Investigation Of Process Parameters To Optimize The Fiber Diameter Of Electrospun Vascular Scaffolds Through Experimental Design, Steffi Wong

Biomedical Engineering

No abstract provided.