Biomaterials Commons^™

Microparticle Propulsion For In Vivo Navigation, Louis Rogowski

Mechanical Engineering Research Theses and Dissertations

Microscale propulsion impacts a diverse array of fields, with simplistic microrobots allowing for novel innovations in microscale surgery and drug delivery. Propulsion at the microscale is constrained by physics, with time-reversal and geometric symmetries limiting available propulsion mechanisms. However, certain fluid environments and surface coatings allow for the propulsion of microparticles through externally applied magnetic fields. Presented here is a detailed analysis of microparticles propelling using spontaneous symmetry breaking, flagella surface coatings, and multi-modal actuation mechanisms. Spontaneous symmetry breaking in nonlinearly viscoelastic fluids is presented for the first time in literature, with two equal and opposite propulsion states existing along …

Detection Of Nucleotides In Hydrated Ssdna Via 2-D H-Bn Nanopore With Ionic-Liquid/Salt-Water Interface, Jungsoo Lee

Multidisciplinary Studies Theses and Dissertations

Accomplishing slow translocation speed with high sensitivity has been the greatest mission for solid-state nanopore (SSN) to electrically detect nucleobases in single-stranded DNA (ssDNA). In this study, a method to detect nucleobases in ssDNA using a SSN is introduced by considerably slowing down the translocation speed and effectively increasing its sensitivity. The ultra-thin titanium dioxide (TiO₂) coated hexagonal boron nitride (h-BN) nanopore was fabricated, along with an ionic-liquid [bmim][PF₆]/2.0 M KCl aqueous (cis/trans) interfacial system, to increase both the spatial and the temporal resolutions. As the ssDNA molecules entered the nanopore, a …

The Use Of Nanoparticles And Electrospun Fibers For Intravaginal Delivery To Treat Viral And Bacterial Infections And Electrophysiological Measurements Of Synthetic Chloride Channels., Farnaz Minooei

Electronic Theses and Dissertations

Female reproductive viral and bacterial infections affect millions of women worldwide. Given the diversity and magnitude of these unmet reproductive health challenges, topical administration of antiretrovirals (ARVs) and antibiotics have emerged as promising approaches to maintain and restore reproductive health. However, currently available intravaginal dosage forms often suffer from low user adherence and the need for frequent, daily administration to achieve therapeutic effect. To address these challenges, the broad goal of this research was to focus on the development of new localized nanoparticle (NP) and electrospun fiber dosage forms to prolong the delivery and enhance the efficacy of active agents …

The Effects Of Solution Condition On Virus Filtration Performance, Fnu Namila

Graduate Theses and Dissertations

Virus filtration is an integral part of the downstream purification of mammalian cell culture-derived biotherapeutics to assure the viral safety of the products. Virus filtration membranes remove viruses based on a size-exclusion mechanism. Commercial parvovirus filers possess unique membrane structure and are designed to remove smaller non-enveloped parvoviruses with size 18-26 nm. However, some filters face issues, such as pre-mature fouling, the decline of filtrate flux, and reduction in virus retention. This doctoral dissertation focused on identifying the factors that influence the filtrate flux and the virus retention capability of commercial virus filters. The effects of solution pH and ionic …

Recombinant Piriform Spider Silk Production, Cole R. Peterson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spider silks are remarkable biomaterials, possessing a variety of desirable mechanical and material properties. Humans have long-sought to utilize these materials. Spiders produce a range of different types of silks for different purposes, such as web-building, egg casing, and prey swathing. Because spiders are difficult to farm, a synthetic biological approach must be used to produce silk-like proteins. This research is intended to improve the production of piriform, a specific type of spider silk. This was done with targeted-improvements to microbial metabolism and recovery methodologies. The methods developed in this research are useful for other types of silk production and …

Incorporation Of Lignin In Natural And Synthetic Biomaterials To Alter Mechanical And Biochemical Properties For Enhanced Wound Healing, Jorge Alfonso Belgodere

LSU Doctoral Dissertations

It is estimated that chronic, non-healing wounds affect more than 6.5 million Americans annually, with an estimated healthcare cost beyond $14 billion. Here, we attempted to create composites of natural (collagen type I or gelatin-methacrylate) or synthetic (poly(ethylene glycol) polymers incorporating a natural plant component, lignin, to combat the costs and limitations current wound healing methods face. Three-dimensional matrices of collagen type I (Col I) are widely used in tissue engineering applications for its abundance in many tissues, bioactivity with many cell types, and excellent biocompatibility. Inspired by the structural role of lignin in plant tissue, we found that sodium …

Fabrication And Characterisation Of Highly Aligned Fibrous Assemblies, Tan Chin Joo

Student Works (2020-2029)

Vascular grafting has been an effective remedy to vascular diseases for decades. Autografting by using the veins or arteries in the patient’s body is found to have patency rate for years. However, autografting may not be possible when compatible vessels are not available. In this case, synthetic vascular grafts are found to be effective replacements. Nevertheless, synthetic grafts with diameter less than 4 mm becomes challenging due to thrombogenicity and mismatch of mechanical properties with the native vessels. Along this line, the ability to develop new biostable synthetic materials suitable for smaller grafts and the ability to evaluate their resulting …

Evaluation Of Hyaluronic Acid To Modulate Oral Squamous Cell Carcinoma Growth In Vitro, Jordan Ringer, Bryan Morrison, Karl Kingsley

Dental Medicine Faculty Research

© 2020 MDPI AG. All rights reserved. Introduction: Previous studies have demonstrated that glycosaminoglycan hyaluronic acid (HA) is capable of mediating oral tumor growth. Some clinical evidence has suggested reduced HA expression predicts poor cancer prognosis and that HA-chemotherapy conjugates may function synergistically to inhibit oral tumor growth. Other studies have found conflicting results that suggest enhanced CD44-HA-mediated growth and proliferation. Due to the lack of clarity regarding HA function, the primary goal of this study was to investigate the effects of HA using well-characterized oral cancer cell lines. Methods: Using several commercially available oral squamous cell carcinoma lines (and …

Optimal Parameter Values For Accurate And Repeatable Nanoindentation Of Human Trabecular Bone, Stephen Matthew Kmak

Master's Theses

Nanoindentation techniques have not been standardized for use on bone tissues, making comparison of bone material properties obtained via nanoindentation across studies difficult and unreliable. This study determined a set of optimal parameter values for thermal drift correction time, dwell time, and loading rate that can be used to obtain accurate and repeatable material properties from human femoral trabecular bone through experimentation and statistical analysis. All testing was conducted using a single nanoindenter on a single trabeculae, with the assumption that material properties within the individual trabeculae were internally consistent. Parameters not of interest during this study, such as ambient …

Decellularization Of Porcine Cartilage Promotes Chondrogenic Differentiation Of Human Chondrocytes, Roxanne Nicole Stone

Boise State University Theses and Dissertations

Knee osteoarthritis (knee OA) is the most common type of osteoarthritis (OA) and accounts for 70% of arthritis-related hospital admissions and 23% of clinical visits. Major limitations in both the current non-surgical and surgical methods are that they only relieve pain and show no evidence for restoring natural tissue anatomy. Leaders in the field propose that a stem cell treatment approach holds promise for the regeneration of a greater proportion of hyaline-like tissue at the repair site. (Cross et al., 2014; Escobar Ivirico, Bhattacharjee, Kuyinu, Nair, & Laurencin, 2017; Helmick et al., 2008; Toh, Foldager, Pei, & Hui, 2014).

It …

Designing Silk Protein-Based Composite Materials With Tunable Heat Transfer And Magnetic Properties, Ye Xue

Theses and Dissertations

Renewable and biocompatible silk protein materials with desired physical properties show promising applications in biomedical field. In this work, a set of protein-based composites with desired thermal and magnetic properties, enhanced by the appropriate distribution of nanofillers in the protein matrix in both 2D-film and 1D-fiber forms was investigated. Results indicate that secondary structures of silk protein materials regenerated by a formic acid-calcium chloride method are different from those of their respective natural silk fibers. Intramolecular beta-sheet structures were found to dominate these silk films, causing these regenerated samples to be water-insoluble but more flexible than traditional silk films with …

Effects Of Hard-To-Soft Segment Ratios On The Synthesis And Physico-Mechanical Properties Of Polyurethane Films, Aaron C. Wilson

Mechanical Engineering Theses

Blood-contacting cardiovascular stents often induce a secondary clotting event due to unrestricted enzymatic activities. The use of hemocompatible polyurethane coatings on these implantable devices is one of the most promising methods to reduce device rejection. In this study, four commercial polyurethane films of various thicknesses and compositions were evaluated for their anticoagulation properties. Results suggested that these films exhibited excellent thermal and physico-mechanical properties while capable of increasing contact time with blood plasma by over a thousand-fold as compared to a control surface. Due to the unknown structure and composition of these commercial films, polyurethane samples were synthesized from toluene …

Pilot Study Exploring The Effect Of Targeted Cox-2 Inhibition In Macrophages Responding To Neuronal Injury; Promoting Enhanced Axonal Regeneration, Alyssa Brauckmann

Electronic Theses and Dissertations

Celecoxib nanoemulsion (CXB-NE) has been developed as a macrophage targeted analgesics by Dr. Janjic and her team at Duquesne University, (Janjic et al, 2018; Liu et al, 2020; Saleem et al, 2019b; Vasudeva et al, 2014). The CXB-NE nanoemulsion carrying a Nonsteroidal Anti-inflammatory (NSAID) inhibitor of COX-2 activity result in a reduction in PGE2 expression in macrophages. Using CXB-NE in rats that have peripheral nerve injury constricting the sciatic nerve relieves hypersensitivity, a pain-like behavior. The treatment also decreases inflammation associated with this chronic constriction injury (Janjic et al, 2018; Saleem et al, 2019b; Stevens et al, 2019). In this …

Design Of A 3d Printed Bioreactor For Bone Cancer Research, Brooklyn K. Vanderwolde, Katelyn Hillson

The Journal of Undergraduate Research

Bone cancer is an aggressive disease and has peak occurrence during physiological stimulation of growth and aging. Astronauts who undergo long-term space missions also acquire an increased risk of bone tissue degeneration and cancer. Few in-vitro models currently exist capable of reproducing the complex microenvironment of bone tissue to support multicellular activity in a three-dimensional structure. This limits the ability to understand disease progression and develop suitable treatment strategies. Therefore, developing a bone tissue model and an associated bioreactor is critical to understand the risks associated with cancer progression and improve treatment and preventions related to those risks. The goal …

Analysis Of Blood Purification Studies On Oxone Mediated Tempo-Oxidized Nano Cellulose Mixed-Matrix Membranes, Tony Roller

Biomedical Engineering Undergraduate Honors Theses

End-stage renal disease (ESRD) is currently the ninth leading cause of death in the United States, and of the 661,00 Americans diagnosed with ESRD, approximately 468,800 were on hemodialysis in 2016. Hemodialysis refers to a technique where a machine combined with a membrane, often referred to as an artificial kidney, is used to clean blood by removing any waste such as urea, potassium, and other smaller waste products while preserving the concentrations and integrity of cells and proteins in the blood. It has been shown in artificial blood studies that cellulose nanomaterials, like TEMPO/Oxidized cellulose nanoparticles (TOCNs), can be integrated …

Hydrolytic Degradation Study Of Polyphosphazene-Plga Blends, Riley Blumenfield

Honors Scholar Theses

The synthesis and in vitro degradation analysis of thin films of poly[(glycineethylglycinato)₇₅(phenylphenoxy)₂₅phosphazene]
(PNGEG₇₅PhPh₂₅) and poly[(ethylphenylalanato)₂₅(glycine-
ethylglycinato)₇₅phosphazene] (PNEPA₂₅GEG₇₅) blended with poly(lactic-co-glycolic acid) (PLGA) was conducted to determine the blends’ potential for use as scaffolding materials for tissue regeneration applications. The samples were synthesized with glycylglycine ethyl ester (GEG) acting as the primary substituent side group, with cosubstitution by phenylphenol (PhPh) and phenylalanine ethyl ester (EPA) to make the final product [1]. Blends of 25% polyphosphazene, 75% PLGA and 50% polyphosphazene, 50% PLGA were …

Characterization Of Oxone Mediated Tempo-Oxidized Nano Cellulose Mixed-Matrix Membranes During Ultrafiltration And Hemodialysis, Kristyn Robling

Biomedical Engineering Undergraduate Honors Theses

The ninth leading cause of death in the United States is kidney disease, and hemodialysis is the process most commonly prescribed for treatment. It utilizes a selectively permeable membrane filter to remove toxins such as urea from the blood and retain necessary protein levels. However, traditional filters, such as cellulose triacetate, used during dialysis can be inefficient in terms of separation performance and reduction of fouling. Recent exploration of nanoparticles has resulted in the creation of Oxone Mediated TEMPO-Oxidized Nano Cellulose which has properties that are believed to increase hydrophilicity, increase tensile capacity, decrease membrane resistance and lower fouling, making …

Modified Stent Design For A Coronary Bifurcation Lesion, Abigail Nowell

Biological Sciences Undergraduate Honors Theses

Currently, 18.2 million adults aged 20 and older are diagnosed with Coronary Artery Disease (CAD) (Benjamin et al., 2019). Stenosis is the most common intervention. However, when a patient has a bifurcated artery, treatment becomes more difficult and is often unsuccessful. This project created a new stent and balloon complex that was tested in vitro using a gel phantom artery model. Two separate prototypes have been created and tested so far, with improvements made upon each. Testing is still underway with Prototype 2.

Development Of B-Type And Multi-Ion Doped Carbonated Hydroxyapatite Bioceramics, Safarzadeh Marjan

Student Works (2020-2029)

The present research is aimed to investigate the effect of varying the carbonate to phosphate (CO32−/ PO43‒) molar ratios from 0.5 to 5 on the physical and mechanical properties of carbonated hydroxyapatite (CHA) synthesized by a wet chemical method. The sintering was performed under dry carbon dioxide atmosphere at 900 °C to maintain the B-type CHA structure. It was found that increases in CO32−/ PO43‒ ratio was accompanied by an increase in the c/a lattice ratio. The diffraction peaks of the synthesized 0.5-5 CHA powders exhibited a single phase material except for 5CHA which revealed the some minor calcite or …

Poly(Vinyl Alcohol)/Α-Chitin/Nanocellulose Composites Developed From Oil Palm Empty Fruit Bunch (Opefb) For Removal Of Cationic Dyes, Chun Fah Mok

Student Works (2020-2029)

In search of an eco-friendly polymeric adsorbent for dye effluent treatment application, poly(vinyl alcohol) (PVA)/chitin/nanocellulose composites were synthesized. The composites were reinforced by oil palm empty fruit bunch fibers (OPEFB)-derived nanocrystalline cellulose (NCC). With addition of 1 wt.% NCC, a maximum improvement of 57.64% and 50.66% in tensile strength and Young’s Modulus were achieved, respectively. However, the PVA-based composites exhibited low resistance in aqueous medium. Hence, maleic acid (MA) was incorporated, in view of modifying PVA-based composites through cross-linking reactions. The effect of varying chitin content (10 wt.%-30 wt.%) and MA content (10%-50% based on total solid content of composite) …

Design Of An Affordable Rotating Drum Electrospinner For Classroom Education, Peder Solberg

The Journal of Undergraduate Research

Electrospinning is a technology used to generate small fibers down to nano-scale size. This method of fiber creation has been around for many years. However, in recent years electrospinning has found increased applications, especially in the area of tissue engineering due to its ability to create fibers with properties similar to the extracellular matrix in tissue. An electrospinning platform can illustrate concepts of engineering, electro-mechanical system design, manufacturing, and biomedical applications in one single package. Hence, it provides an excellent opportunity to integrate into secondary (middle and high school) and post-secondary (undergraduate) technology education.

Furthermore, just as integration of 3D …

Solostand, Hau Nhat Doan, Sydney Gray, Celina Dioso

Biomedical Engineering

The purpose of this scope of work is to highlight the progress and development of SoloStand sponsored by Derek Herrera, chief technical officer and founder of SpinalSingularity. SoloStand is an attachment to a wheelchair that will benefit paraplegics that use wheelchairs. A portable and customizable attachment to a wheelchair will allow the user to do everyday tasks without transferring into a separate standing wheelchair and travel more easily. This document outlines everything that has been done in fulfillment of our senior project requirements.

Role Of Nanoparticle–Polymer Interactions On The Development Of Double-Network Hydrogel Nanocomposites With High Mechanical Strength, Andrew Chang, Nasim Babhadiashar, Emma Barrett-Catton, Prashanth Asuri

Bioengineering

Extensive experimental and theoretical research over the past several decades has pursued strategies to develop hydrogels with high mechanical strength. Our study investigated the effect of combining two approaches, addition of nanoparticles and crosslinking two different polymers (to create double-network hydrogels), on the mechanical properties of hydrogels. Our experimental analyses revealed that these orthogonal approaches may be combined to synthesize hydrogel composites with enhanced mechanical properties. However, the enhancement in double network hydrogel elastic modulus due to incorporation of nanoparticles is limited by the ability of the nanoparticles to strongly interact with the polymers in the network. Moreover, double-network hydrogel …

Biotech Connector Brochure

Biotech Connector

The Biotech Connector represents an important opportunity to serve the economic needs of the people of Nebraska through further diversification of Nebraska's economy, and by helping forge and illuminate a pathway to jobs in the biotechnology space for Nebraska students.

The Biotech Connector is 7,700 sq. ft. of well-equipped wet-lab space located on Nebraska Innovation Campus. We provide incubation space and services to bioscience startups and high-growth biotech and research-based businesses.

Wet lab space provides aspiring startups and technology businesses with access to very expensive laboratory equipment that would be outside of the budget of most startups. Lack of access …

Bacterial Cell Wall Characterization Via Atomic Force And Confocal Microscopy, Joree Sandin

Theses and Dissertations--Mechanical and Aerospace Engineering

Poor oral hygiene is a severe global health issue, with about 44% of the Earth’s population suffering from untreated tooth decay, accounting for over $100 billion dollars spent on dental services per year in the United States, alone. Manual treatments, such as brushing, flossing, or swishing with antiseptic rinse are the main ways to alleviate harmful bacteria that cause these oral health problems. Streptococcus mutans (S. mutans) is a group of highly antibiotic, Gram-positive bacteria that heavily contribute to oral cavities, plaque build-up, and potential loosening or loss of dental implants if a biofilm develops. Currently, the mechanism …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

3d Printing Of Iron Oxide Incorporated Polydimethylsiloxane Soft Magnetic Actuator, Rasoul Bayaniahangar

Dissertations, Master's Theses and Master's Reports

Soft actuators have grown to be a topic of great scientific interest recently. As the fabrication of soft actuators with conventional microfabrication methods are tedious, expensive, and time consuming, employment of 3-D printing fabrication methods appears promising as they can simplify fabrication and reduce the production cost. Complex structures can be fabricated with 3-D printing such as helical coils can achieve actuation performances that otherwise would not be possible with simpler geometries. In this thesis development of soft magnetic helical coil actuators of iron-oxide embedded polydimethylsiloxane (PDMS) was achieved with embedded 3-D printing techniques. Composites with three different weight ratios …

Integrated Techno-Economic And Life Cycle Analyses Of Biomass Utilization For Value-Added Bioproducts In The Northeastern United States, Yuxi Wang

Graduate Theses, Dissertations, and Problem Reports (ETD)

A multi-stage spatial analysis was first conducted to select locations for lignocellulosic biomass-based bioproduct facility, using Geographical Information System (GIS) spatial analysis, multi-criteria analysis ranking algorithm, and social-economic assessment. A case study was developed to determine locations for lignocellulosic biorefineries using feedstocks including forest residue biomass and three energy crops for 13 states in the northeastern United States. In the entire study area, 11.1% of the counties are high-suitable, 48.8% are medium-suitable for biorefinery siting locations. A non-parametric analysis of cross-group surveys showed that preferences on biorefinery siting are homogeneous for experts in academia and industry groups, but people in …

Artificial Synthetic Scaffolds For Tissue Engineering Application Emphasizing The Role Of Biophysical Cues, Samerender Nagam Hanumantharao

Dissertations, Master's Theses and Master's Reports

The mechanotransduction of cells is the intrinsic ability of cells to convert the mechanical signals provided by the surrounding matrix and other cells into biochemical signals that affect several distinct processes such as tumorigenesis, wound healing, and organ formation. The use of biomaterials as an artificial scaffold for cell attachment, differentiation and proliferation provides a tool to modulate and understand the mechanotransduction pathways, develop better in vitro models and clinical remedies. The effect of topographical cues and stiffness was investigated in fibroblasts using polycaprolactone (PCL)- Polyaniline (PANI) based scaffolds that were fabricated using a self-assembly method and electrospinning. Through this …

Binder Saturation, Layer Thickness, Drying Time And Their Effects On Dimensional Tolerance And Density Of Cobalt Chrome - Tricalcium Phosphate Biocomposite, John Ruprecht

All Graduate Theses, Dissertations, and Other Capstone Projects

Traditional metals such as stainless steel, titanium and cobalt chrome are used in biomedical applications (implants, scaffolds, etc.) but suffer from issues such as osseointegration and compatibility with existing bone. One way to improve traditional biomaterials is to incorporate ceramics with these metals so that their mechanical properties can be similar to cortical bones. Tricalcium phosphate is such a ceramic with properties such that it can be used in the human body. This research explores the use of the Binder Jetting based additive manufacturing process to create a novel biocomposite made of cobalt chrome and tricalcium phosphate. Experiments were conducted …