Biomaterials Commons^™

De Novo Protein Binding To Zinc Oxide Through Biomineralization Pathways, Jean-Mark A. Francis

Theses and Dissertations

De novo proteins are structurally distinct from proteins found in nature and thus capable of having their amino acid sequence modified to accomplish tasks such as increasing protein-nanoparticle binding without unfolding or decomposing. Zinc Oxide nanoparticles are functionally distinct from their bulk counterparts and are widely used as semiconductors in a variety of fields such as medicine and agriculture. With demand for these nanoparticles increasing, environmentally sustainable methods of Zinc Oxide nanoparticle synthesis are being investigated as an eco-friendly alternative to currently utilized but environmentally hazardous chemical and physical techniques. This research investigates the binding characteristics between Zinc Oxide nanoparticles …

Dynamic, Reconfigurable, And Hierarchical Biosynthetic Composites Via Collagen Self-Assembly Within Highly Crowded Microgel Pastes, Elif Narbay, Abbygail Caine, Sanika Pandit, Gabrielle Montgomery, Marion Harper, E. Daniel Cárdenas-Vásquez, Hatte Hamilton, Megan Hicks, Daniel Mattar, Kyle Choy, Marco Bisoffi, L. Andrew Lyon

Engineering Faculty Articles and Research

The fabrication of a new class of biomimetic biomaterials is reported using nanostructured microgel pastes formed from “overpacked” assemblies of ultrasoft poly(N-isopropyl acrylamide-co-acrylic acid) microgels and their composites with collagen. Despite the solid-like nature of microgel pastes, collagen fibrillogenesis is robust and rapid, with a 3D collagen network forming throughout the paste volume. Structural organization within the composite is interrogated via a suite of microscopy methods, while rheological characterization provides insight into the static and dynamic mechanical properties of the materials. Long-range fibrillogenesis is enabled by local crowding, dynamics, and spatial reconfigurability of pastes at the …

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …

Explorations Of Dna-Single-Walled Carbon Nanotube Interactions To Develop Multiplexed Molecularly Specific Biosensors For Inflammation, Amelia K. Ryan

Dissertations and Theses

Inflammatory cytokines such as interleukin-6 (IL-6) and interleukin-12 (IL-12) are central regulators of immune signaling and key biomarkers of disease, yet existing assays for their detection remain slow, invasive, and lack multiplexing ability. This dissertation advances the development of single-walled carbon nanotube (SWCNT) optical nanosensors capable of real-time, multiplexed, and molecularly specific cytokine detection through innovative use of single-stranded DNA (ssDNA) interfaces.

First, an IL-6-specific DNA aptamer was employed as both a dispersing agent and recognition probe for SWCNT fluorescence sensing. Sequence modifications, including anchor domains, truncations, and thermally induced refolding, were systematically tested to optimize sensitivity and selectivity. The …

Synthesis Of Bio-Orthogonal Hydrogels For 3d Cell Culture Via Penicillamine Β-Thiolactone-Mediated Native Chemical Ligation, Kaelin E. Marshall, Matthew E. Currier, Nathan J. Oldenhuis

Honors Theses and Capstones

Many hydrogel systems designed to mimic the extracellular matrix (ECM) employ thiol-based chemistries with undesirable functional groups, including vinyl sulfones and methacrylates. In downstream applications, any unreacted functional groups are problematic and render hydrogels non-viable for human use. Here, we introduce modifications to the Native Chemical Ligation (NCL) mechanism, exploring the elimination of cytotoxic byproducts and increased reaction rate by using a β-thiolactone. The inclusion of the β-thiolactone results in retention of the thiol within the gel, as well as enhanced kinetics due to the thermodynamic favorability of the ring opening and amide formation. We achieved this by functionalizing 4-arm …

Advances In Bacterial Cellulose-Based Scaffolds For Tissue Engineering: Review, Rewati Raman Ujjwal, Gymama Slaughter

Center for Bioelectronics Publications

Bacterial cellulose (BC) has emerged as a highly versatile and promising biomaterial in tissue engineering, with potential applications across skin, bone, cartilage, and vascular regeneration. Its exceptional properties like high mechanical strength, superior biocompatibility, excellent moisture retention, and inherent ability to support cell adhesion and proliferation, make BC particularly effective for wound healing and skin regeneration. These attributes accelerate tissue repair and foster new tissue formation, highlighting its value in skin-related applications. Additionally, BC's capacity to support osteogenic differentiation, combined with its mechanical robustness, positions it as a strong candidate for bone tissue engineering, facilitating regeneration and repair. Recent advancements …

Physicochemical Property Effects On Immune Modulating Polymeric Nanoparticles: Potential Applications In Spinal Cord Injury, Daniel J. Kolpek, Jaechang Kim, Hisham Mohammed, John C. Gensel, Jonghyuck Park

Markey Cancer Center Faculty Publications

Nanoparticles (NPs) offer promising potential as therapeutic agents for inflammation-related diseases, owing to their capabilities in drug delivery and immune modulation. In preclinical studies focusing on spinal cord injury (SCI), polymeric NPs have demonstrated the ability to reprogram innate immune cells. This reprogramming results in redirecting immune cells away from the injury site, downregulating pro-inflammatory signaling, and promoting a regenerative environment post-injury. However, to fully understand the mechanisms driving these effects and maximize therapeutic efficacy, it is crucial to assess NP interactions with innate immune cells. This review examines how the physicochemical properties of polymeric NPs influence their modulation of …

Advancing Biofabrication Methodologies To Develop Biomimetic Tissue Scaffolds For Musculoskeletal Applications, Nashaita Yezdi Patrawalla

Theses and Dissertations

Musculoskeletal injuries impose a significant global burden, affecting millions and generating an economic toll exceeding $14 billion. Tissue engineering has gained traction as a promising strategy offering potential for functional restoration of damaged musculoskeletal tissues. This research aims to advance biofabrication techniques for generation of biomimetic tissue scaffolds, by optimizing scaffold design and modulating fabrication process parameters to generate scaffolds for musculoskeletal regeneration with application-specific tailored properties. In this realm, collagen-based biomaterials have been extensively investigated for tendon and ligamentous applications, and in combination with bioceramics incorporated into the collagen framework to produce composite scaffolds that better recapitulate the native …

Detection Of Methane Leaks By The Use Of Mid-Range Infrared Camera, Jared Rosario, Oscar Salcido

Undergraduate Research Symposium Posters

Timely detection of methane leaks from natural gas infrastructure, like pipelines and valves, is essential for mitigating environmental and safety risks. This research focuses on using mid-wave infrared (MwIR) cameras on unmanned aerial systems (UAS) to detect leaks. By leveraging machine learning, the study aims to develop an efficient, real-time methane inspection system that operates directly on embedded processors on UAS platforms.

This project employs the FLIR G300a OGI camera for remote gas inspection, utilizing video preprocessing and optical flow to mask gas plumes in footage. The YOLOv8 deep learning model is used to detect gas pixels and segment the …

Resolving The Nanoscale Structure Of Β-Sheet Peptide Self-Assemblies Using Single-Molecule Orientation–Localization Microscopy, Weiyan Zhou, Conor L. O'Neill, Tianben Ding, Oumeng Zhang, Jai S. Rudra, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Synthetic peptides that self-assemble into cross-β fibrils are versatile building blocks for engineered biomaterials due to their modularity and biocompatibility, but their structural and morphological similarities to amyloid species have been a long-standing concern for their translation. Further, their polymorphs are difficult to characterize using spectroscopic and imaging techniques that rely on ensemble averaging to achieve high resolution. Here, we utilize Nile red (NR), an amyloidophilic fluorogenic probe, and single-molecule orientation-localization microscopy (SMOLM) to characterize fibrils formed by the designed amphipathic enantiomers KFE8^L and KFE8^D and the pathological amyloid-beta peptide Aβ42. Importantly, NR SMOLM reveals the helical (bilayer) …

Rational Design Of Peptide-Based Materials Informed By Multiscale Molecular Dynamics Simulations, Dhwanit Rahul Dave

Dissertations, Theses, and Capstone Projects

The challenge of establishing a sustainable and circular economy for materials in medicine and technology necessitates bioinspired design. Nature's intricate machinery, forged through evolution, relies on a finite set of biomolecular building blocks with through-bond and through-space interactions. Repurposing these molecular building blocks requires a seamless integration of computational modeling, design, and experimental validation. The tools and concepts developed in this thesis pioneer new directions in peptide-materials design, grounded in fundamental principles of physical chemistry. We present a synergistic approach that integrates experimental designs and computational methods, specifically molecular dynamics simulations, to gain in-depth molecular insights crucial for advancing the …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Exploring The Effects Of Varied Land Use On Elemental Concentrations Within Streams, Logan Jennings

Biological and Agricultural Engineering Undergraduate Honors Theses

It is well documented that human activity influences the chemistry of surrounding waters. As such, it is possible that there is a link between land use within a watershed and the chemical composition of the stream. The objectives of this study are to determine if varied land use does affect the concentrations of macronutrients and trace elements present in the streams of Northwest Arkansas, and if so, to determine what extent urban and agricultural development are responsible for these changes. Water samples were collected across 19 streams in the Northwest Arkansas region between January and March of 2022. Water samples …

Synthesis Of Thiol-Acrylate Hydrogels For 3d Cell Culture And Microfluidic Applications, Anowar Hossain Khan

LSU Doctoral Dissertations

Globally cell culture is an $18.98 billion industry as of 2020, with an 11.6 percent annual growth rate. Drug discovery has an estimated worth of $69.8 billion in 2020 and is predicted to grow to $110.4 billion by 2025. Three-dimensional (3D) cell culture of cancer cells is one of the rapidly growing felids since it better recapitulates in vivo conditions compared to two-dimensional (2D) models. However, it is challenging to grow 3D tumor spheroids outside the body, and some of the existing technology can generate these spheroids outside the human body but poorly mimic in vivo tumor models. Therefore, there …

Comparison Effect On Biogas Production From Vegetable And Fruit Waste With Rumen Digesta Through Co-Digestion Process, Anika Tasnim, Muhammad Rashed Al Mamun, Md Anwar Hossen, Md Towfiqur Rahman, Md Janibul Alam Soeb

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Biogas is the best renewable energy as it can be produced from any biomass for example any plant or living organism. The purpose of this research was to produce biomethane from co-digestion of vegetable and fruit waste with rumen digesta through anaerobic digestion process. In this research, two trials of experiment were conducted. Each trial has three different sample with different mixing ratios. Raw materials used in the experiment was rumen digesta of goat and cow, potato, capsicum, cucumbers, onions, radish, cauliflower, carrot, leafy vegetables, apple, banana, and papaya. In each sample, 1200 gram of raw materials were used. Hydraulic …

A Highly Conductive, Flexible, And 3d-Printable Carbon Nanotube-Elastomer Ink For Additive Bio-Manufacturing, Andy Shar, Phillip Glass, Daeha Joung Ph.D.

Undergraduate Research Posters

The synthesis of a highly conductive, flexible, 3D-printable, and biocompatible ink has been of great interest in the field of bio-based additive manufacturing. Various applications include ultra-sensitive, microscale tactile sensors, patient-customizable scaffolds for cardiac and nerve tissue regeneration, and flexible electrocardiogram (ECG) electrodes. Here, a novel elastomeric carbon nanocomposite is presented consisting of amino-functionalized carbon nanotubes (CNT-NH₂) homogenously dispersed in a one-part room-temperature vulcanizing (RTV) silicone matrix. The use of acetone as a swelling solvent aids in electrical percolation through the elastomer matrix. CNT-NH₂ ratios can be tuned to fit various needs; higher tensile strength is favored …

Molecular Dynamics Simulations Of Self-Assemblies In Nature And Nanotechnology, Phu Khanh Tang

Dissertations, Theses, and Capstone Projects

Nature usually divides complex systems into smaller building blocks specializing in a few tasks since one entity cannot achieve everything. Therefore, self-assembly is a robust tool exploited by Nature to build hierarchical systems that accomplish unique functions. The cell membrane distinguishes itself as an example of Nature’s self-assembly, defining and protecting the cell. By mimicking Nature’s designs using synthetically designed self-assemblies, researchers with advanced nanotechnological comprehension can manipulate these synthetic self-assemblies to improve many aspects of modern medicine and materials science. Understanding the competing underlying molecular interactions in self-assembly is always of interest to the academic scientific community and industry. …

Tools And Strategies For The Patterning Of Bioactive Molecules And Macromolecules, Daniel J. Valles

Dissertations, Theses, and Capstone Projects

Hypersurface Photolithography (HP) is a printing method for fabricating structures and patterns composed of soft materials bound to solid surfaces and with ~1 micrometer resolution in the x, y, and z dimensions. This platform leverages benign, low intensity light to perform photochemical surface reactions with spatial and temporal control of irradiation, and, as a result, is particularly useful for patterning delicate organic and biological material. In particular, surface- initiated controlled radical polymerizations can be leveraged to create arbitrary polymer and block- copolymer brush patterns. Chapter 1 will review the advances in instrumentation architectures from our group that have made these …

Design And Control Of A Peristaltic Pump To Simulate Left Atrial Pressure In A Conductive Silicone Model, Jeremy Collins

Mechanical Engineering Undergraduate Honors Theses

According to the CDC, atrial fibrillation is responsible for more than 454,000 hospitalizations and approximately 158,000 deaths per year. A common treatment for atrial fibrillation is catheter ablation, a process in which a long flexible tube is guided through the femoral artery and to the source of arrhythmia in the heart, where it measures the electrical potential at various locations and converts problematic heart tissue to scar tissue via ablation. This paper details the design and control of a low-cost ($400) peristaltic pump system using repetitive control to replicate blood pressure in the left atrium in a conductive silicone model …

Applied Machine Learning In Extrusion-Based Bioprinting, Shuyu Tian

Theses and Dissertations

Optimization of extrusion-based bioprinting (EBB) parameters have been systematically conducted through experimentation. However, the process is time and resource-intensive and not easily translatable across different laboratories. A machine learning (ML) approach to EBB parameter optimization can accelerate this process for laboratories across the field through training using data collected from published literature. In this work, regression-based and classification-based ML models were investigated for their abilities to predict printing outcomes of cell viability and filament diameter for cell-containing alginate and gelatin composite hydrogels. Regression-based models were investigated for their ability to predict suitable extrusion pressure given desired cell viability when keeping …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

Integrated Techno-Economic And Life Cycle Analyses Of Biomass Utilization For Value-Added Bioproducts In The Northeastern United States, Yuxi Wang

Graduate Theses, Dissertations, and Problem Reports (ETD)

A multi-stage spatial analysis was first conducted to select locations for lignocellulosic biomass-based bioproduct facility, using Geographical Information System (GIS) spatial analysis, multi-criteria analysis ranking algorithm, and social-economic assessment. A case study was developed to determine locations for lignocellulosic biorefineries using feedstocks including forest residue biomass and three energy crops for 13 states in the northeastern United States. In the entire study area, 11.1% of the counties are high-suitable, 48.8% are medium-suitable for biorefinery siting locations. A non-parametric analysis of cross-group surveys showed that preferences on biorefinery siting are homogeneous for experts in academia and industry groups, but people in …

A Microfluidic Paper-Based Analytical Device For Early Diagnosis And Prognosis Of Acute Myocardial Infarction, Lim Wei Yin

Student Works (2020-2029)

Acute myocardial infarction (AMI), also termed as heart attack, is often clinically screened by blood test through the measurement of cardiac biomarkers (i.e., troponin (T or I), creatine kinase (CK−MB) and myoglobin) and electrocardiography (ECG) changes which are presented to the hospital. However, the early diagnosis of AMI is challenging because the detection of biomarkers such as troponin (T or I) and CK−MB are only reliable at the intermediate and later stages (> 6 hours after chest pain onset), during myocardial injury and myocardial infarction. On the other hand, myoglobin often been used as early biomarker which is detectable within …

Nano Fab Lab 63, Brian K. Deemer, Josh Clemons, Nick Brodine, Delaney Fitzsimmons

Mechanical Engineering

Lawrence Livermore National Laboratories (LLNL) has several steps in the production process for ceramic nanofiber tubes that they would like to improve - electrospinning, cutting, rolling, sealing and heat treating. We undertook the challenge to deliver LLNL with a semi-automated process that efficiently integrates the steps of cutting, rolling, and sealing to save time and improve control over end dimensions. In this document, we discuss the technical background of the manufacturing steps currently followed to create nanofiber tubes, identify which steps are incorporated in our prototype and explain how they will interface with one another, define the design requirements, present …

Primitive Palms: A Density Study On The Impacts Of Harvesting Natural Materials For Construction Purposes On Sumak Allpa Of The Amazon Rainforest, Zachary Bull

Independent Study Project (ISP) Collection

In an effort to better understand how rural construction techniques affect a surrounding environment, this study combines a density test of the natural building materials used in the construction of a school on Sumak Allpa island of the Orellana Province in the Amazon basin of Ecuador. The focus of the study measures the density of the bamboo species Guadua angustifolia and the Panama hat plant Carludovica palmata on the island while noting a comprehensive compilation of the techniques and materials used in the building process. Using a mix of plots and transects, a comparison of harvested material to remaining material …

Deswelling Induced Morphological Changes In Dual Ph And Temperature Responsive Ultra-Low Crosslinked Poly (N-Isopropyl Acrylamide)-Co-Acrylic Acid Microgels, Molla R. Islam, Maddie Tumbarello, L. Andrew Lyon

Engineering Faculty Articles and Research

Poly(N-isopropylacrylamide) microgels prepared without exogenous cross-linker are extremely “soft” as a result of their very low cross-linking density, with network connectivity arising only from the self-crosslinking of pNIPAm chains. As a result of this extreme softness, our group and others have taken interest in using these materials in a variety of bioengineering applications, while also pursuing studies of their fundamental properties. Here, we report deswelling triggered structural changes in poly(N-isopropylacrylamide-co-acrylic acid) (ULC10AAc) microgels prepared by precipitation polymerization. Dynamic light scattering suggests that the deswelling of these particles not only depends on the collapse of …

Piezoresponse, Mechanical, And Electrical Characteristics Of Synthetic Spider Silk Nanofibers, Nader Shehata, Ishac Kandas, Ibrahim Hassounah, Patrik Sobolčiak, Igor Krupa, Miroslav Mrlik, Anton Popelka, Jesse Steadman, Randolph V. Lewis

Biology Faculty Publications

This work presents electrospun nanofibers from synthetic spider silk protein, and their application as both a mechanical vibration and humidity sensor. Spider silk solution was synthesized from minor ampullate silk protein (MaSp) and then electrospun into nanofibers with a mean diameter of less than 100 nm. Then, mechanical vibrations were detected through piezoelectric characteristics analysis using a piezo force microscope and a dynamic mechanical analyzer with a voltage probe. The piezoelectric coefficient (d₃₃) was determined to be 3.62 pC/N. During humidity sensing, both mechanical and electric resistance properties of spider silk nanofibers were evaluated at varying high-level …

Characterization Of Bacteriorhodopsin And Halorhodopsin Reconstituted In Lipid Bilayer Membranes, Joel Domkam Kamwa

Graduate Theses and Dissertations

Motivated to produce electricity with photon activated ion pumps, the main purpose of this work was to characterize the photosynthetic membrane proteins bacteriorhodopsin (proton pump) and halorhodopsin (chloride pump). The proteins were re-suspended in lipid bilayers. For this work, an experimental set-up was built which included: chambers for lipid bilayer formation and characterization, lasers for ion pump activation, and an AxoPatch electrophysiology system for small photocurrent measurement. Lipid bilayer membranes were formed using mostly folding method: folding two monolayers together. The membranes were characterized by their resistance, capacitance, and generated photocurrent. Photocurrent was generated upon illumination of lipid-protein membranes with …

Developing A 3d In Vitro Model By Microfluidics, Hung-Ta Chien

Dissertations and Theses

In vitro tissue models play an important role in providing a platform that mimics the realistic tissue microenvironment for stimulating and characterizing the cellular behavior. In particular, the hydrogel-based 3D in vitro models allow the cells to grow and interact with their surroundings in all directions, thus better mimicking in vivo than their 2D counterparts. The objective of this thesis is to establish a 3D in vitro model that mimics the anatomical and functional complexity of the realistic cancer microenvironment for conveniently studying the transport coupling in porous tissue structures. We pack uniform-sized PEGDA-GelMA microgels in a microfluidic chip to …

How Strongly Do Oysters Stick?, Nicolás M. Morato, Andrés M. Tibabuzo, Jonathan J. Wilker

The Summer Undergraduate Research Fellowship (SURF) Symposium

Biological adhesives are a type of interfacial material that has incredible potential to generate new biomimetic compounds that can replace current strong, but toxic, adhesives. Therefore, a study of the chemical composition and mechanical properties of those bio-adhesives is necessary. However, in the case of oysters, despite known chemical characterization of the adult’s adhesive, there are almost no studies on its mechanical properties. Furthermore, there is no available information on the adhesive properties of spat (oysters in their larvae state). Herein, we present the first mechanical characterization of the spat adhesive, measuring its adhesion strength by hydrodynamic determination using a …