Biomaterials Commons^™

Environmental Ethics Of Plastics And Microplastics Manufacturing: Balancing Industrial Production And Ecological Responsibility, Arindam Gupta

Discovery Day - Daytona Beach

The global production of plastics has increased dramatically over the past several decades, providing substantial economic and societal benefits while simultaneously generating complex environmental and ethical challenges. A growing body of research has identified microplastics—plastic particles smaller than 5 millimeters—as persistent pollutants that accumulate in aquatic ecosystems, soil systems, and the atmosphere. These particles originate both from the degradation of larger plastic products and from direct industrial production processes used in plastics manufacturing. The ethical implications of plastics and microplastics production raise important questions about environmental responsibility, regulatory oversight, and the balance between economic development and ecological sustainability. This project …

Development Of Chitosan Encapsulated Ag/Zno Ternary Nanocomposites For Multifunctional Activity: Synthesis And Characterization, Latifa Ali Al Yabhouni Al Dhaheri

Thesis/ Dissertation Defenses

Nanocomposites of polymers combined with metal oxide nanoparticles have gained much attention due to their synergistic properties leading to enhanced functional ability. Herein, we report the synthesis of a nanocomposite composed of chitosan (CS) with Ag/ZnO nanoparticles produced via a wet chemistry route and fabrication of a pure CS and CS/Ag/ZnO thin films while varying the concentration of ZnO for each sample using a sol-gel transformation method. The CS/Ag/ZnO nanocomposite was characterized to study its crystal structure, morphology, thermal, and chemical properties. Morphological studies revealed uniform deposition of Ag NPs (with size range of 20-50 nm) and ZnO nanoparticles (with …

Comparison Of Peening Effect Between Additive Manufacutred And Drawing Titanium Alloy, Hitoshi Soyama

15th International Conference on Shot Peening

Although additively manufactured (AM) metals are attractive materials, their remarkable weak fatigue properties are an obstacle to their practical application. Thus, post-processing to improve their fatigue properties is required. In the present study, powder bed fusion using laser sintering titanium alloy, i.e., PBF-LS/Ti6Al4V was treated by shot peening (SP), submerged laser peening (SLP), cavitation peening (CP), and fine particle bombarding (FPB), then the fatigue properties were investigated by a torsional fatigue test, comparing with drawing Ti6Al4V. It was revealed that the fatigue strength at 10⁷ was 446 ± 5 MPa for PBF-LS/Ti6Al4V treated by FPB+CP, 359 ± 9 MPa …

Oral Administration Of Ph-Responsive Polymeric Nanoparticles Based On Zein And Their Therapeutic Potential On Cancer., Bruno Alejandro Valades-Aguilar, José Raúl Rangel-López, Jennifer Citlally Leos-Rivera, Moisés Armides Franco-Molina, María Cristina Rodríguez-Padilla, Diana Ginette Zárate-Triviño

Research Symposium

Background: Zein is a water-insoluble protein extracted from the endosperm of corn seeds, this polymer is an attractive matrix to encapsulate hydrophilic compounds because of its high proportion of hydrophobic amino acids, making it a potential smart delivery material for several treatments in the biopharmaceutical industry. nanoparticles have been used as drug delivery systems for the improvement of oral bioavailability; however, the strategies of nanoparticle obtention need the addition of stabilizers. in this study, a modified method to obtain zein nanoparticles was developed.

Methods: Zein nanoparticles (ZNps) were made by a thermal treatment and precipitated into ovalbumin at a ratio …

Engineering Nanofibers: Laboratory Characterization, Microstructural Analysis, And Image Processing Insights, Sayed Ahmadreza Razian, Mohammad Arjomandi, Kaspars Maleckis

UNO Student Research and Creative Activity Fair

Polymer nanofibers have attracted high interest in a wide array of applications, including biomaterial scaffolding, textiles, sensors, reinforcement in composites, and filtration systems. Many of these applications combine nanofibers into non-woven fabrics for better properties and easier manipulation. The properties and performance of nanofiber-based fabrics are affected by various microstructure parameters, including fiber alignment, diameter, and gap sizes between the nanofibers. These structural parameters can be controlled by adjusting various process parameters during manufacturing process, but the exact process parameter-microstructure relationships vary depending on the polymer system and need to be studied individually. The goal of this study is to …

Engineering Of Functionalized Carbon Nano-Onions Embedded Bsa Nanocomposite Fibers For Stimuli-Responsive Drug Release, Ramiro Manuel Velasco Delgadillo, Narsimha Mamidi

Research Symposium

Background: Advanced drug delivery systems (DDSs) have received enormous attention in biomedical applications due to their pharmacodynamic and pharmacokinetic drug properties. For the present study, poly 4-hydroxyphenyl methacrylate (PHPMA)/CNOs (f-CNOs) inserted bovine serum albumin (BSA) nanofibers were prepared for stimuli-responsive release of Doxorubicin (DOX). Temperature and pH would be altered to study the release of DOX in acidic microenvironments.

Methods: PHPMA were coupled with COOH-CNOs via ester coupling via the sonochemical method to produce PHPMA-CNOs (f-CNOs). Then, f-CNOs/DOX embedded BSA nanofibers were prepared at room temperature using Forcespinning. UV spectra of DOX-loaded nanofibers were studied to investigate the …

Engineered Exosomes For The Multimodal Imaging Directed Photo-Immunotherapy Of Colorectal Cancer, Deepak S. Chauhan, Meena Jaggi, Subhash C. Chauhan, Murali M. Yallapu

Research Symposium

Background: Rio Grande Valley experience severe cancer health disparity. A novel therapeutic modality may serve as better therapeutic option. Nanohybrids endowed with multifunctionality, longer circulation time, large surface area have emerged as an active preference for cancer research. However, rising concern of nanomaterials toxicity and scalability issues has slowed their translation to clinics. Exosomes (Exo) are endogenous endocytic origin 40-100 nm vesicles found in various body fluids, which in comparison to synthetic nanoparticles, are biodegradable, highly biocompatible as well as immunocompatible in nature. Although bulk isolation of exosomes from human body fluids is still a problem and engineering of exosomes …

Histological Evidence For The Therapeutic Effect Of Chitosan Nanofibrous Dressing On Acute Skin Wounds In A Rat Model, Mahboubeh Ghanbari, Sayed Ahmadreza Razian, Sara Cartwright, Yury Salkovskiy, Jason Mactaggart, Mark A. Carlson

UNO Student Research and Creative Activity Fair

Introduction: Large-area skin traumas, such as thermal burns, are among the most severe health issues that decrease patients’ quality of life and burden healthcare systems. The CDC estimates that there are 1.1 million burns requiring medical attention each year, with more than 20,000 cases involving at least 25% of the body surface, resulting in 4,500 deaths. In addition, about 10,000 people die from burn-related infections. A promising solution to alleviate this problem is using wound dressings based on biopolymers with inherent wound healing properties and biodegradability. One of these biopolymers is chitosan, which is derived from arthropod shells and exhibits …

Tensile Testing Of 3d Printed Tpu Samples For Pediatric Biomaterial Applications, Sheridan C. Perry, Rodriguez M. Rafael, Victor Huayamave, Bryan M. Gonzalez, Kim Dae-Won, Zachary R. Nadeau

PanaSoMM

Additive Manufacturing (AM) has, in recent years, become one of the most widespread and preferred prototyping methods. The most popular additive manufacturing method is Fused Deposition Modeling. FDM’s popularity is primarily attributed to its 3 major strengths of rapid prototyping, variability in material choice, and subject specific nature. The medical industry is one of the larger industries that has benefited from 3D printing especially in the terms of medical trainers. Unfortunately, most medical trainers that are developed (either being 3d printed or through traditional manufacturing processes) are poor substitutes for the human body. This can be attributed to either a …

Breaks In Longitudinal Elastic Fibers Of Human Femoropopliteal Arteries, Elham Zamani

UNO Student Research and Creative Activity Fair

Breaks in Longitudinal Elastic Fibers of Human Femoropopliteal Arteries

Elham Zamani1, Majid Jadidi1

1 Department of Biomechanics, University of Nebraska Omaha, Omaha, NE

Introduction: Elastin is a major protein in the body with half-life >50 years. It is thought that elastic fibers are formed before the postnatal period. In the femoropopliteal artery (FPA), the main artery in the leg, longitudinal elastic fibers are present in External Elastic Lamina (EEL). Our team has studied more than 1000 cadaveric human FPA and has noticed that there are big breaks in their longitudinal elastic fibers in some subjects. Our goal in this work …

A Ph-Sensitive Delivery System For The Prevention Of Dental Caries Using Salivary Protein, Yi Zhu, Yizhi Xiao, Elizabeth Gillies, Walter L. Siqueira

Western Research Forum

Dental caries remains one of the most common chronic diseases worldwide. In previous studies, salivary proteins (e.g. histatin 3, statherin) have demonstrated biological functions including the inhibition of crystal growth, antibacterial activities, which are directly related to tooth homeostasis and prevention of dental caries. However, proteins are susceptible to the high proteolytic activities in the oral environment. Therefore, pH-sensitive chitosan nanoparticles (CNs) have been proposed as potential carriers to protect proteins against enzymatic degradation at physiological salivary pH, in addition to swell selectively at lower pH conditions to facilitate the release of the encapsulated proteins, as major oral complications occur …

Multifunctional Hybrid Sol-Gel Implant Coatings On Anodized Titanium Substrates To Improve Osseointegration And Antimicrobial Effectiveness, Zach Gouveia

Western Research Forum

To improve patient outcomes in orthopedic and dental implantation procedures, the development of multifunctional implant coatings that can inhibit microbial cell proliferation while promoting osseointegration have been sought out by clinicians. While recent developments in material science and cell biology have seen the development of such coatings, many proposed systems lack clinical translatability. For example, to reach the clinic, modern coating systems must be highly adherent to their substrate (to avoid delamination upon implantation), have sufficient wettability (to promote the fixation of cells), and facilitate the controlled and sustained release of antimicrobial factors (falling within the therapeutic window to prevent …

Improving The Palatability Of Colonoscopy Preparations, Phuong Anh Hoang Nguyen, Darnell Leon Cuylear, Heather Elizabeth Canavan

Shared Knowledge Conference

Colorectal cancer (CRC) is the second leading cause of cancer-related deaths in the United States. The most reliable screening method of CRC is a colonoscopy which requires a 4-Liter polymer with electrolytes preparation. Two in five patients are non-compliant to their colonoscopy schedules, with many patients who abstain reporting refusal due to significant discomfort associated with this preparation. Furthermore, there are distinct gender differences in the tolerance of colonoscopy preparations in male and female populations. We hypothesize the differences in clinic are a result of toxic effects of the drug associated with poor mixing by individual patients. PEG, the drug, …

An Engineer’S Take On The Bone-Ligament Interface: Utilizing Novel Technology To Improve Clinical Outcomes, Emma Garcia

Shared Knowledge Conference

Ligament repair is a common surgical practice with a significant lack of viable replacements. The current gold standard for repair is the use of tendon grafts from cadavers or from another place in the patient’s body; however, these often cause more problems than they solve including immune responses or a lack of mobility in another place in the body. Synthetic replacements are of growing interest, though the ability to mimic the complex structure of the ligament and how it connects to the bone remains an obstacle. Our lab built a 3D bioprinter combined with an electrospinner to address this complicated …

3d Bioprinting And Near-Field Electrospinning Composite Scaffolds For The Bone-Ligament Interface, Emma Garcia, Christina Salas, Matthew N. Rush, Christopher Buksa, Marissa Perez, Ava Mauser, Steven Nery, Fermin Prieto, Darielys Morales

Shared Knowledge Conference

3D bioprinting is an additive manufacturing technique that can utilize a range of bioactive materials to construct specific architectures that mimic native tissue. Near-field electrospinning (NFE) offers precise alignment control to create non-woven mats with high tensile strengths. We built a custom E-spin printer that enables layer-by-layer alternating deposition between 3D bioprinting and NFE to create composite scaffolds for the bone-ligament interface. This complex region is difficult to simulate due to its functionally graded mechanical and biochemical properties. We created NFE poly(caprolactone) highly aligned micro-fibers which formed collagen fibril-like bundles. Poly(ethylene glycol) diacrylate with decellularized bone was encased in the …

Improving The Palatability Of Colonoscopy Preparations, Phuong Anh Hoang Nguyen, Sarah Mounho, Darnell Cuylear, Heather Canavan

Shared Knowledge Conference

Colorectal cancer (CRC) is the second leading cause of cancer-related deaths in the United States. The most reliable screening method of CRC is a colonoscopy which requires a 4-Liter polymer with electrolytes preparation. Two in five patients are non-compliant to their colonoscopy schedules, with many patients who abstain reporting refusal due to significant discomfort associated with this preparation. Furthermore, there are distinct gender differences in the tolerance of colonoscopy preparations in male and female populations. We hypothesize the differences in clinic are a result of toxic effects of the drug associated with poor mixing by individual patients. PEG, the drug, …

Developing Strategies To Toughen Bio-Inspired Adhesives, Narelli P. Narciso, Samuel Lee Huntington, Jonathan J. Wilker

The Summer Undergraduate Research Fellowship (SURF) Symposium

Mussels and other marine creatures adhere very well in underwater environments, having the ability to withstand the force of the sea. These animals have inspired synthetic biomimetic adhesives for wet systems, presenting potential for biomedical applications. However, most current commercial adhesives tend to be brittle, not resisting repetitive movements. This study assesses toughening strategies to improve the mussel-inspired adhesives’ ductility while maintaining its strength. The strategies included altering the polymer’s chemical structure by changing the percentage of polyethylene glycol (PEG) in the molecule and by adding fillers, such as calcium carbonate, silica and nacre - a calcium carbonate compound found …

How Strongly Do Oysters Stick?, Nicolás M. Morato, Andrés M. Tibabuzo, Jonathan J. Wilker

The Summer Undergraduate Research Fellowship (SURF) Symposium

Biological adhesives are a type of interfacial material that has incredible potential to generate new biomimetic compounds that can replace current strong, but toxic, adhesives. Therefore, a study of the chemical composition and mechanical properties of those bio-adhesives is necessary. However, in the case of oysters, despite known chemical characterization of the adult’s adhesive, there are almost no studies on its mechanical properties. Furthermore, there is no available information on the adhesive properties of spat (oysters in their larvae state). Herein, we present the first mechanical characterization of the spat adhesive, measuring its adhesion strength by hydrodynamic determination using a …

The Sub-Chronic Vascular Response To Water-Borne Embolic Coacervates., Joshua P. Jones, Monika Sima, Russell J. Stewart

Biomedical Engineering Western Regional Conference

Water-borne coacervates that solidify in response to decreasing ionic strength have been developed as an agent for small vessel transcatheter embolization. Here, the sub-chronic vascular response to these agents will be presented. Embolic coacervates demonstrated a benign foreign body response, which supported tissue ingrowth and stabilized vessel occlusion out to 28 days. As with other liquid embolics, occlusion is dependent upon mechanical obstruction of the vessel and native thrombus. Over time, the thrombus becomes more organized by fibroblasts. Continuation of the processes seen at 28 days will likely result in fibrous encapsulation of the embolic coacervate, further stabilizing the occlusion.

Differentiation And Containment Of Derived Pancreatic Beta Cells, Caden Duffy, Alonzo Cook Ph.D.

Biomedical Engineering Western Regional Conference

Currently, the only permanent cure for Type 1 Diabetes is a pancreatic or islet transplant. With the shortage of donors, we are progressing research towards alternative therapies by differentiating induced pluripotent stem cells into derived pancreatic β-cells that can be transplanted and used as treatment for Type 1 Diabetes. We are investigating methods to increase the yield of fully derived, insulin producing pancreatic β-cells and are additionally researching the use of hydrophilized expanded polytetrafluoroethylene for use in cell containment devices. These devices could offer a future alternative for islet transplantation in human patients.

Super-Hydrophobic And Anti-Microbial Surfaces Via Carbon Infiltrated-Carbon Nanotubes, Christian Dalon Esplin, Anton Bowden, Brian Jensen

Biomedical Engineering Western Regional Conference

No abstract provided.

Structural Mrsa Resistance Through Carbon-Infiltrated Carbon Nanotube Coating Of External Fixator Pins, Jaclyn Larsen, Stephanie Morco, Brian Jensen, Anton Bowden

Biomedical Engineering Western Regional Conference

No abstract provided.

Resorption Rate Of Bioresorbable Materials For Possible Use In Self-Expanding Stents, Jared R. Park, Jason Porter, Anton Bowden

Biomedical Engineering Western Regional Conference

This study investigates the mechanical behavior of various polymers after a period of degradation from exposure to a Saline Solution. The study found that PLA and PDLLA do not have significant degradation over a period of 2 months, while PLA has a sharp decrease in strength after 7 days.

Effect Of Multiple Confined Compression/Stress Relaxation Cycles On Cross-Linked Alginate Pore Size., Sindhu Kolar Venkat, Erik L. Risa, Bergren Antell, Maryam Mobed-Miremadi

Biomedical Engineering Western Regional Conference

No abstract provided.

Towards A Bioselective Surface For Treatment Of Sepsis In A Hemoperfusion Device, Karl F. Schilke, Ramya Raman, Bonan Yu, Erik Hahn, Jonathan Su

Biomedical Engineering Western Regional Conference

Sepsis is a dysregulated immune response to circulating bacteria/endotoxin. Hemoperfusion is a promising treatment, but is not universally effective and can unacceptable blood damage. We are developing protein-repellent hydrogel nanofilms that can be grown on a variety of surfaces, and functionalized with “click-ready” pathogen-binding proteins expressed by Genetic Code Expansion (GCE). The extremely rapid, bioorthogonal “click” immobilization chemistry eliminates prior purification, maximizes surface loading, and guarantees spatial orientation of the immobilized proteins. We have demonstrated pathogen binding and blood protein repulsion by these layers, suggesting that they may be part of effective treatments for sepsis and other applications.

Molecular Modeling Of Antibody-Antigen Binding Near Solid Surfaces, Derek Bush, Thomas Knotts

Biomedical Engineering Western Regional Conference

Antibody microarrays are biosensors that have the potential to revolutionize molecular detection in medicine, scientific research, and national defense. However, current microarrays are not widely used due to problems including poor reproducibility and signal quality, unbalanced antibody performance, and cross-reactivity. Prior work in the area focused mainly on the stability of the antibody alone and not its affinity for its antigen. This presentation shows results of using molecular simulation to determine how different types of surfaces affect antigen binding to surface-tethered antibodies. The results offer an unprecedented, molecular-level view into these protein-protein-surface interactions and how to drive binding to occur.

Surface Engineering Of Titanium Alloy To Stimulate The Bone Regeneration, Yubin Meng, Zhenduo Cui, Zhaoyang Li, Xue Li, Jin Zhao, Xubo Yuan, Xianjin Yang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Fluorescent Materials Design At Nanoscale For Biomedical Photonics In Near Infrared Window, Kohei Soga, Masao Kamimura

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Cartilage Engineering: Optimization Of Media For Chondrogenic Differentiation In Vitro, Evan Surma, Sherry L. Harbin, Hongji Zhang, Stacy Halum

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lower back pain from intervertebral disc injury affects around 84% of the population at some point in their life, which at its worst may cause total immobilization. This pain can only be temporarily relieved by spinal fusion or intervertebral disc replacement; however, both of these cause loss of natural motion in patients by removing damaged fibrocartilage discs. While these techniques help mitigate pain briefly, no permanent solution exists currently to both relieve pain and preserve natural motion. My work may be a solution by eventually providing patient-specific implants that resemble native tissue in the regeneration process that could be absorbed …

Bioengineered Cell Niche For Skeletal Muscle Regeneration, Nicole M. Whittern, Naagarajan Narayanan, Chunhui Jiang, Owen Jones, Jay Gilbert, Michael Whittern, Shihuan Kuang, Meng Deng

The Summer Undergraduate Research Fellowship (SURF) Symposium

Skeletal muscles can self-repair minor strains, lacerations, and contusions; however, in cases of volumetric muscle lossand muscle degenerative diseases, tissue fails to regenerate. Current cell-based therapies, such as myoblast transplantation, have significant drawbacks of low survival rates and engraftment efficacy, mainly due to the absence of supportive cell microenvironment. Scaffolds that mimic the natural cell microenvironment provide a robust platform to support cell adhesion, migration, proliferation, and differentiation. Electrospinning is a versatile technology platform used for fabricating the fiber scaffold that mimics the extracellular matrix. Thus, we aim to reconstitute the cell microenvironment through development of aligned fiber scaffolds by …