Biomaterials Commons^™

Analysis Of The Mechanical, Microstructural, And Biocompatibility Properties Of Novel Magnesium-Based Hybrid Nanocomposite Materials For Orthopedic Applications, Thomas H. Mcgehee

Biomedical Engineering Undergraduate Honors Theses

Bone fractures and complete joint replacements are becoming more common, primarily because of accidents and age-related issues. Conventional solutions to treat these orthopedic injuries involve inert metal alloys to correct bone fractures until the healing process is complete, where a secondary revision surgery is then required to remove the implant. Issues regularly associated with these solutions include stress shielding, bone resorption, infection, inflammation, and implant loosening. Magnesium (Mg)-based nanocomposites offer promising potential as an alternative to commonly used metal alloys because of their favorable mechanical properties and biocompatibility. A particularly advantageous property of Mg is its natural biodegradation in vivo, …

Fabrication And In Vitro Biocompatibility Assessment Of Composite-Coated Magnesium Materials, Bryce Williams

Biomedical Engineering Undergraduate Honors Theses

This study provides a comparative assessment of the corrosion, morphology, and biological properties of four of the most promising coating methods for magnesium in biomedical applications, namely micro-arc oxidation (MAO), graphene oxide (GO)-containing MAO coating, MAO/sol-gel composite coating, and MAO/polycaprolactone (PCL) polymer dip coating approaches. Despite the abundance of research focused on these promising approaches, there is a notable lack of comparative studies evaluating their properties. To this end, the investigated composite coatings are ZK60+MAO, ZK60+MAO/GO, ZK60+MAO/Sol-gel, and ZK60+MAO/PCL composite coating. Several tests were used to assess various properties of the prepared groups such as in vitro corrosion characteristics, surface …

Surface Laser Texturing Of Cocrmo Alloys, Gabriel Dharwadker

Biomedical Engineering Undergraduate Honors Theses

Artificial orthopedic implants such as hip joints suffer from excessive wear due to excess friction between the polyethylene and cobalt-chromium-molybdenum surfaces of the device. This increase in friction causes a fraction of them to give out within ten years. Therefore, to minimize the probability of this happening, recent research has been conducted regarding laser surface texturing of the cobalt-chromium-molybdenum alloy components of artificial joints. These surface textures serve to mimic the native lubrication mechanisms of cartilage in natural joints, which, in a natural joint, lowers the friction. However, the production of these laser surface textures is still a field of …

The Interaction Of Angiotensin I And Ii On Calcified Aortic Valve Cells, Fah Sysavanh

Biomedical Engineering Undergraduate Honors Theses

Cardiovascular diseases affect the older population with limited treatments available. Aortic valve stenosis is a cardiovascular disease in which the aortic valve narrows, causing blood flow constriction and calcification.¹ The only treatment is to replace the valve, which can be costly and lead to other health complications.

The renin-angiotensin system (RAS) is a pathway that helps with maintaining cardiovascular homeostasis. Angiotensin I (ANGI) and II (ANGII) are hormones in the RAS that cause an increase in inflammation, stress, and blood pressure by binding to the Angiotensin Type 1 Receptor (AT1R).¹ Gelatin-based valve thin film (vTF) platforms were fabricated to investigate …

Alternative Fixation Of Venous Valves For Bioprosthetic Applications, Makenzie Kapales

Biomedical Engineering Undergraduate Honors Theses

Venous valve failure allows for the retrograde, or backward, flow of blood into the lower extremities, which leads to Chronic Venous Insufficiency (CVI). CVI infringes upon quality of life through ulceration and can result in death due to Deep Vein Thrombosis (DVT), or blood clots, causing pulmonary embolism. A successful treatment of CVI restores valve function and prevents retrograde blood flow; however, current bioprosthetic venous valves exhibit low patency and high calcification. To improve upon bioprosthetic venous valves and CVI treatment, the University of Arkansas’s Cardiovascular Biomechanics Lab conducts studies with the purpose of comparing the properties and performance of …

Hydrogel Drug Delivery Platform Integrity And Utilization Analysis, Joshua Carson Adams

Biomedical Engineering Undergraduate Honors Theses

Traumatic Spinal Cord Injury (SCI) generally results in permanent sensorimotor dysfunction. This is due to failed axonal regeneration at the site of injury. Recent studies have highlighted the use of stem-cell based therapies embedded in hydrogel to treat SCI. Embedding cell therapies in hydrogel provides a platform that increases the survival of both integrated grafted cells and stem cells/stem cell progeny. There are a variety of drug delivery agents for treating SCI such as neuro-regenerative cells and Schwann cells, however, single agents are not promising for functional regeneration. We propose a combinatorial approach using sciatic nerve (SN) extracellular matrix (ECM), …

Evaluating Cellular Response Of Different Valve Interstitial Cell (Vic) Phenotypes To Angiotensin I, Smit Patel

Biomedical Engineering Undergraduate Honors Theses

Calcific Aortic Valve Disease (CAVD), one of the leading causes of death in the United States, is characterized by diminished functioning and limited movement of the aortic valve (AV) due to increased thickening, disorganized extracellular matrix elastin fibers, increased collagen content, and abnormal deposition and formation of calcium nodules on the AV [1, 2]. There are two types of CAVD: i) Aortic valve sclerosis (AVS), in which patients suffer from tissue hardening, fibrosis, and early calcification, and ii) calcific aortic stenosis (CAS), representative by excessive calcification on the AV and reduced AV opening, are the two main forms of CAVD …

Developing Aligned Nerve Scaffolds In A 3d Type-I Collagen Gel, Gabriel David

Biomedical Engineering Undergraduate Honors Theses

Despite significant progress in the field of peripheral nerve repair, clinical success is still limited, leaving millions to suffer from peripheral neuropathy with billions spent every year for treatment. Nerve repair methods that are capable of maximizing the regenerative properties of peripheral nerves are greatly desired in the field of medical science. This research aims to fill the gap between modern methods and the future of nerve repair by creating type-I collagen scaffolds with aligned degradation pores that will assist and nurture nerves growing through them. This is achieved by incorporating adipose stem cells into type-I collagen hydrogels and aligning …

Analysis Of Blood Purification Studies On Oxone Mediated Tempo-Oxidized Nano Cellulose Mixed-Matrix Membranes, Tony Roller

Biomedical Engineering Undergraduate Honors Theses

End-stage renal disease (ESRD) is currently the ninth leading cause of death in the United States, and of the 661,00 Americans diagnosed with ESRD, approximately 468,800 were on hemodialysis in 2016. Hemodialysis refers to a technique where a machine combined with a membrane, often referred to as an artificial kidney, is used to clean blood by removing any waste such as urea, potassium, and other smaller waste products while preserving the concentrations and integrity of cells and proteins in the blood. It has been shown in artificial blood studies that cellulose nanomaterials, like TEMPO/Oxidized cellulose nanoparticles (TOCNs), can be integrated …

Characterization Of Oxone Mediated Tempo-Oxidized Nano Cellulose Mixed-Matrix Membranes During Ultrafiltration And Hemodialysis, Kristyn Robling

Biomedical Engineering Undergraduate Honors Theses

The ninth leading cause of death in the United States is kidney disease, and hemodialysis is the process most commonly prescribed for treatment. It utilizes a selectively permeable membrane filter to remove toxins such as urea from the blood and retain necessary protein levels. However, traditional filters, such as cellulose triacetate, used during dialysis can be inefficient in terms of separation performance and reduction of fouling. Recent exploration of nanoparticles has resulted in the creation of Oxone Mediated TEMPO-Oxidized Nano Cellulose which has properties that are believed to increase hydrophilicity, increase tensile capacity, decrease membrane resistance and lower fouling, making …

Investigating Virus Clearance Via Ph Inactivation During Biomanufacturing, Wenbo Xu

Biomedical Engineering Undergraduate Honors Theses

In the processing of biopharmaceuticals, viral clearance and viral safety are important for the development of monoclonal antibodies. Murine xenotropic leukemia virus (XMuLV) is one of the retroviruses, recommended by Food and Drug Administration (FDA) as a model virus for viral clearance via inactivation from therapeutics derived from Chinese hamster ovary cells (CHO). A robust and effective method was investigated to clear or inactivate endogenous viruses by low pH inactivation. The effects of different conductivity and inactivated time on XMuLV clearance was determined. Acetate buffer was prepared with different conductivity, and 2% XMuLV was spiked into acetate buffer. XMuLV virus …

Effect Of Polymer Composition Of Injectable Hydrogels On Programmable Release Of Methylene Blue, Mary Brandecker

Biomedical Engineering Undergraduate Honors Theses

Temperature sensitive hydrogels have been used as injectable hydrogels because the polymer solutions can be liquid at room temperature and gel at body temperature. Injectable hydrogels have been used in biomedical applications to deliver drugs and other small molecules throughout the body. Methylene Blue was used as the drug in this study for its antioxidant and neuroprotective properties. PluronicⓇ F127 (PF127) is a copolymer consisting of repeating units of polyethylene oxide and polypropylene oxide in the form PEO-PPO-PEO. PF127 in solution is a temperature sensitive hydrogel that transitions to a gel at body temperature at specific polymer compositions. A standard …

Design Of Microporous Membranes For The Development Of Brain-On-Chip Devices, Andre Figueroa Milla

Biomedical Engineering Undergraduate Honors Theses

Traumatic brain injuries (TBIs) are a major global health concern that have an economic impact of $60 billion in the United States in related costs annually. Developing drugs for TBI treatment is an approach that currently faces limitations involving the permeability of the blood-brain barrier (BBB). The BBB naturally limits molecules from reaching the brain as a protective mechanism against disease, acting as a barrier during drug delivery. Understanding the BBB mechanically and chemically following a TBI could potentially assist future studies to alleviate the symptoms and long-term effects of TBI by pharmaceuticals. The Mechanobiology and Soft Materials Laboratory (MSML) …

Analysis Of Biological Response To Ecm Hydrogel Injection, Grady Dunlap

Biomedical Engineering Undergraduate Honors Theses

Abstract

Under normal circumstances, skeletal muscle possesses the capacity to regenerate and heal via inflammatory and myogenic pathways. In cases of severe tissue loss or certain diseases, this capacity is lost, often resulting in loss of tissue function. Extracellular matrix (ECM), the protein scaffold which houses cells in physiological tissue, has been shown to have structural and chemical properties which influence cell migration and phenotype. This results in ECM’s capacity to encourage a regenerative response when implanted into severely damaged skeletal muscle. Additional advantages are apparent when an ECM scaffold is digested into a hydrogel, namely less invasive implantation via …

Chitosan As An Antiviral, Tayler Pauls

Biomedical Engineering Undergraduate Honors Theses

There is no broad-based antiviral medication available today; there are specific antivirals, for example, the antiretroviral for HIV. However, these specific antivirals are not available in each country and can be problematic for specific patients. Chitosan is proposed as a possible broad-based antiviral, which has already demonstrated antibacterial properties, antiviral properties in plants, is used for wound healing and as a hydrogel among other medical applications. The methods used are transfection of NIH-3T3 cells with GFP-adenovirus with 0.1%, 0.5%, and 1% chitosan added to virus prior to transfection. Fluorescence microscopy and flow cytometry data has validated that the use of …

Isolation Of Metallic Single-Walled Carbon Nanotubes For Electrically Conductive Tissue Engineering Scaffolds, Jakob Hockman

Biomedical Engineering Undergraduate Honors Theses

Metallic single-walled carbon nanotubes (m-SWNTs) were separated from pristine SWNTs using affinity chromatography for use in electrically conductive tissue engineering scaffolds. Approximately one third of SWNTs have metallic properties. Separations were achieved using a protocol modified from Liu & coworkers (2011) in order to improve the method for cell culture environments. Samples enriched in m-SWNTs were isolated and characterized. However, challenges still remain for the complete separation of m-SWNTs from their semiconducting counterpart (s-SWNTs) using this protocol. Approaches to improve separation and reduce the difficulties associated with processing the nanotubes were suggested. One of the ultimate destinations of these nanotubes …

Customization Of Titanate Nanofiber Bioscaffolds, Jared Hopkins

Biomedical Engineering Undergraduate Honors Theses

In the field of orthopedic devices implant loosening is a major issue resulting in the majority of device failures. These failures result in the need for costly secondary procedures. To reduce device loosening an improved method of tissue anchoring is required. A previously studied titanate nanofiber bioscaffold has been shown to be safely implantable and to contribute to the differentiation of mesenchymal stem cells to osteocytes. Through the customization of both physical and chemical characteristics this titanate nanofiber bioscaffold was fabricated as a potential means to enhance tissue anchoring for use with orthopedic devices. This customization was enabled by acoustic …

Investigating The Mechanical Behaviors Of Organic/Inorganic Composite Bone Scaffolds, Parker Davidson

Biomedical Engineering Undergraduate Honors Theses

The regeneration of bone over a large area cannot occur without a structure for the bone cells to bind and divide. The use of an organic/inorganic composite bone scaffold appears to be a promising alternative to the current clinical standard of bone grafting. Bone grafting is very limited, in that the size and shape of the area are hard to replicate and the use of donor tissue can trigger an immunologic response resulting in rejection of the bone tissue. This study experimented with composite bone scaffolds which can be made to fit the shape of the area in which bone …