Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Institution
- Publication
- Publication Type
Articles 1 - 7 of 7
Full-Text Articles in Biomaterials
Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak
Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak
Journal of Sustainable Construction Materials and Technologies
This study investigates the physical, mechanical and thermal properties of hemp-based composites produced with traditional binders such as lime, cement, gypsum, clay, and water-based glue. Hemp fractions of different sizes (splinter, shiv, fiber and powder) were combined with these binders to manufacture cube and plate specimens, which were tested for physical, mechanical, thermal, and temperature resistance properties. The study aims to compare the mechanical, physical, thermal, and fire behaviour of these composites to assess their suitability for sustainable construction applications. The hemp-based composites were tested for unit weight, water absorption, compressive strength and thermal conductivity. Most specimens are lightweight (<1000 kg/m3), and exhibit good thermal insulation performance and high compressive deformability, making them suitable for seismic-prone regions. The glue-based composite had the lowest unit weight, measured as 330 kg/m3. Thermal conductivity ranged from 0.051 to 0.243 W/m· K, with several mixtures performing better than natural pumice. While cement-based composites showed the highest compressive strength, ranging from 5.5 to 24.8 kg/cm2, natural hydraulic lime is the lowest. Water absorption was high, and moisture release occurred slowly across all hemp fractions. Combustion tests indicated that hemp-based materials have moderate temperature resistance, with charring temperatures ranging from 238–265°C for raw hemp and 300–385°C when mixed with binders. Overall, hemp-based composites are lightweight, eco-friendly, and suitable for non-load-bearing construction and insulation applications. However, improvements in moisture resistance and long-term durability are necessary to enhance their practical applicability.
Impact Of Glass Powder As A Sustainable Material On The Workability, Strength, And Durability Properties In High-Performance Basalt Fiber Reinforced Concrete: A Statistical Analysis, Ahmed Fathi Mohamed Salih
Impact Of Glass Powder As A Sustainable Material On The Workability, Strength, And Durability Properties In High-Performance Basalt Fiber Reinforced Concrete: A Statistical Analysis, Ahmed Fathi Mohamed Salih
Journal of Sustainable Construction Materials and Technologies
The global construction sector is increasingly challenged to balance environmental sustainability with the growing demand for durable, high-performance materials. As cement production continues to be a major source of anthropogenic CO2 emissions, the incorporation of alternative, low-impact binders has become a key strategy for reducing the environmental footprint of concrete. In this context, glass powder (GP)—a finely ground industrial by-product rich in amorphous silica—has emerged as a promising partial replacement for Portland cement. Its pozzolanic reactivity contributes to improved hydration and matrix densification, while its use also supports circular economy principles by diverting waste glass from landfills. At the same …
Piezoelectric Concrete: A Smart Material Approach For Energy-Harvesting Structural Technologies, Dianah Mazlan, Vynotdni Rathinasamy, Naveen Kumar, Liu Chunpeng, Elango Elango
Piezoelectric Concrete: A Smart Material Approach For Energy-Harvesting Structural Technologies, Dianah Mazlan, Vynotdni Rathinasamy, Naveen Kumar, Liu Chunpeng, Elango Elango
Journal of Sustainable Construction Materials and Technologies
The rapid growth of urban infrastructure demands innovative materials that not only support structural performance but also contribute to sustainability through energy harvesting. Piezoelectric concrete, which integrates ceramics, polymers, nanomaterials, and bio-based fillers into cementitious matrices, has emerged as a promising solution. This review systematically explores the fundamentals of piezoelectricity in concrete, highlighting how stress-induced electromechanical coupling enables both energy harvesting and structural health monitoring. The paper critically evaluates major material systems including PZT ceramics, PVDF polymers, hybrid nanocomposites, and emerging bio-based materials, alongside their integration strategies such as embedded and surface-mounted approaches. Applications across pavements, bridges, and smart buildings …
Comparative Analysis Of Life Cycle Assessment Of Traditional And Contemporary Timber Buildings, Sadık Akşar, Gökçe Tuna
Comparative Analysis Of Life Cycle Assessment Of Traditional And Contemporary Timber Buildings, Sadık Akşar, Gökçe Tuna
Journal of Sustainable Construction Materials and Technologies
Wood has long been used as a primary building material, but with the Industrial Revolution and the spread of multi-story structures, its structural limitations became evident. In the 21st century, engineered timber products have reintroduced wood as a sustainable alternative, offering advantages such as lightness, rapid assembly, and recyclability. At the same time, buildings are responsible for significant environmental impacts, making assessment methods essential. Life Cycle Assessment (LCA) is one of the most widely used tools for evaluating these impacts across all stages of a building’s life cycle. This study applies LCA to timber construction systems, focusing on both traditional …
Comparative Study On The Performance Of Ggbs, Uggbs, And Rha-Incorporated Cement Mortar Mixes, Devansh Goel, Sudarshan D. Kore
Comparative Study On The Performance Of Ggbs, Uggbs, And Rha-Incorporated Cement Mortar Mixes, Devansh Goel, Sudarshan D. Kore
Journal of Sustainable Construction Materials and Technologies
The environmental footprint of cement production has accelerated the pursuit of sustainable alternatives in the construction industry. Supplementary cementitious materials (SCMs), particularly those derived from industrial and agricultural waste, offer a promising approach to reducing cement consumption while maintaining performance. This study evaluates the fresh and mechanical behavior of binary, ternary, and quaternary cementitious mortar blends incorporating ground granulated blast-furnace slag (GGBS), ultrafine GGBS (UGGBS), and rice husk ash (RHA) as partial replacements for cement. A total of 32 mortar mixes were designed with water-to-binder (w/b) ratios ranging from 0.3 to 0.5 and varied replacement levels of RHA (0-20%), GGBS …
Integration Of Biology, Ecology And Engineering For Sustainable Algal‑Based Biofuel And Bioproduct Biorefinery, James Allen, Serpil Unlu, Yaşar Demirel, Paul N. Black, Wayne R. Riekhof
Integration Of Biology, Ecology And Engineering For Sustainable Algal‑Based Biofuel And Bioproduct Biorefinery, James Allen, Serpil Unlu, Yaşar Demirel, Paul N. Black, Wayne R. Riekhof
Department of Chemical and Biomolecular Engineering: Faculty Publications
Despite years of concerted research efforts, an industrial-scale technology has yet to emerge for production and conversion of algal biomass into biofuels and bioproducts. The objective of this review is to explore the ways of possible integration of biology, ecology and engineering for sustainable large algal cultivation and biofuel production systems. Beside the costs of nutrients, such as nitrogen and phosphorous, and fresh water, upstream technologies which are not ready for commercialization both impede economic feasibility and conflict with the ecological benefits in the sector. Focusing mainly on the engineering side of chemical conversion of algae to biodiesel has also …
Techno-Economic And Fluid Dynamics Analysis For Growing Microalgae With The Intent Of Producing Biofuel Using A System Model, Leah R. Raffaeli
Techno-Economic And Fluid Dynamics Analysis For Growing Microalgae With The Intent Of Producing Biofuel Using A System Model, Leah R. Raffaeli
Electronic Theses and Dissertations
Techno-economic and systems studies on microalgal growth scenarios to date are abbreviated and missing a number of important variables. By including these variables in a detailed model integrating biology, chemistry, engineering, and financial aspects, a more defined systems analysis is possible. Through optimizing the model productivity based on the resulting net profit, the system analysis results in a more accurate assessment of environmental and economic sustainability of specific algal growth scenarios. Photobioreactor algal growth scenario optimization in the system model has resulted in realistic engineering design requirements based on algal growth requirements and fluid dynamics analysis. Results show feasibility for …