Aeronautical Vehicles Commons^™

Citizensatellite: Low Cost Missions For The Unordinary Innovator, Robert J. Twiggs, Amin Djamshidpour, Ted Tagami, Tony So

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Robert Twiggs, Amin Djamshidpour, Ted Tagami, and Tony Sotitled "CitizenSatellite: Low Cost Missions for the Unordinary Innovator" from August 19, 2016.

Secondary Launch Opportunities Orbital Atk, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Secondary Launch Opportunities Orbital ATK" from August 17, 2016.

2015-2016 Eraudb Aiaa Design/Build/Fly Technical Report, Trevor W. Perrott

Student Works

The economic potential of small unmanned aerial vehicles (SUAVs) has been well documented and reported. According to the Association for Unmanned Vehicle Systems International (AUVSI), there is an associated economic impact from the growth of the UAV industry. The goal of the American Institute of Aeronautics and Astronautics Design/Build/Fly Competition Research Program (AIAA DBF CRP) is to investigate design and manufacturing methods for application to SUAVs within the scope of the AIAA DBF Competition.

Students were engaged in the application of aerospace engineering knowledge for the production of a dual-aircraft system. Through the use of Computational Fluid Dynamics (CFD), Computer …

Development Of A "Multi-Cut" Payload For Use In Stratospheric Ballooning Missions, James Flaten, Joey Habeck, Noah Biniek, Steven Smeaton, Austin Langford, Jordan Diers, Isaac Krieger

2017 Academic High Altitude Conference

The ability to cut strings (AKA lines) during stratospheric ballooning missions has a wide variety of uses including, but not limited to, (a) flight termination (i.e. cutting payloads away from the main balloon), (b) cutting away excess lift balloon(s) to slow ascent rate (and possibly achieve float), (c) cutting away ballast weights to slow descent rate or increase ascent rate, (d) cutting away burst balloon(s) on descent to avoid parachute entanglement, and (e) cutting away payloads which are intended to return to the ground independently, for experimental purposes. We report on the development of a “multi-cut” payload box that uses …

Citizen Satellite: A Way To Have Low Cost Space Missions For The Unordinary Innovator, Robert J. Twiggs, Amin Djamshidpour, Ted Tagami, Tony So

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Robert Twiggs, Amin Djamshidpour , Ted Tagami, and Tony So titled "Citizen Satellite: A Way to have Low Cost Space Missions for the Unordinary Innovator" from August 7, 2016.

Risk-Based Approach To Assessment Of Advanced Technologies For Conceptual Design, Adipratnia Asmady

Master's Theses

The conceptual design phase of an aerospace system development program is typically characterized by short duration and relatively limited resources, yet design decisions are made that have critical implications on program risk. To address the more aggressive requirements, one of these decisions is the selection of advanced technologies. System developers need to assess advanced technologies early on, but are faced with uncertainties surrounding the potential net benefits. The concept introduced in this study is uncertainty characterization as a way to better understand the associated risk. A framework was developed to guide the interaction between the technology developer and the system …

Windswept: Tailwinds, Headwinds, Crosswinds - Oh My!, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Tilt-Rotor Drone, Benjamin Stone, Zachary Crandall

Electrical Engineering

A drone is defined a "an unmanned aircraft that can fly autonomously[2]." In the year 2016, there exist many applications for small scale drones. Drones, having had primarily military applications, now have use in hobby robotics, photography, and even in surveying. But drones have not yet been perfected and still have room for much improvement. Several problems with drones come in the form of battery life, stability, and size. Large drones can fit many sensors and probes, but are heavy and have less flight time. For autonomous drones, stability can be an issue even though there exist many stable drones. …

Uav As A Service: Providing On-Demand Access And On-The-Fly Retasking Of Multi-Tenant Uavs Using Cloud Services, Justin Yapp

Doctoral Dissertations and Master's Theses

As commercial roles for Unmanned Aerial Vehicles (UAVs) become more well-defined and demand for the services provided by them increases, UAVs rely more on new cloud computing services and co-operative coordination to provide mission planning, control, tracking and data processing. We present UAV as a Service (UAVaaS) framework, which brings features commonly found in traditional cloud services, such as Infrastructure, Platform, and Software as a Service, to the domain of UAVs. Our work aims to conceptualize and design UAVaaS for commercial applications. Specifically, a cloud-provided orchestration framework that allows multi-tenant UAVs to easily serve multiple heterogenous clients at once and …

2d Aeroacoustic Analysis Of Flow In The Flame Trench, Meghan Pokorski

Doctoral Dissertations and Master's Theses

We present here a methodology for using the commercial software ANSYSFLUENT to predict the acoustic field associated with Space-Launch System (SLS). We consider a two-dimensional model of flame deflector, and flame trench. The ANSYS code is then used to simulate the internal flow. Both the steady state case is considered along with other cases where the inflow has a harmonic component. A Ffowcs-Williams Hawking (FWH) surface is then constructed within the computational domain to use the computed flow fluctuations to obtain the acoustic field. The acoustic data was then compared to the experimental data.

When using the ANSYS code for …

High Power Rocket Design Report, Laura E. Calcara, Monica Fernandez, Chris Green, Trent Hosokawa

Honors Thesis

Highpower rockets are extremely sensitive systems that require precise planning, testing, and analysis in order to yield accurate results. Under the guidance of project advisor, Dan Larson, a highpower rocket was designed and built to reach an apogee of 3000 feet. Additionally, means of dual deployment was used in order to aid in the safe descent and recovery of the rocket. In order to meet this expectation, two parachutes were used in conjunction with black powder ejection charges. Compliance with the safety standards of NAR and NFPA was met for the ejection system used in dual deployment. To ensure that …

The Design Of A Racing Simulator: A Three-Phase User Testing Approach, Jakob E. Rouleau, Eric J. Wach

Human Factors and Applied Psychology Student Conference

No abstract provided.

Utilization Of Trss To Assist Pilot’S Decision Making Process During Critical Runway Operations., Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Examining American Attitudes On The Use Of Military Drones, Todd Brandon

Political Science Theses and Capstones

Recent polls have revealed that Americans of both the political left and right support the use of military drones. This statement stands true among groups who traditionally do not support the use of military force. I hypothesize that people of a more liberal persuasion will be more concerned with whether or not the drone program endangers innocent civilians, while those of a more conservative view will be more concerned with the legality of conducting military drone strikes. I analyze data obtained from the Pew Research Center to examine people's attitudes on military drone strikes via framing theory. My hypothesis has …

Syllabus: Space Systems Engineering 122 (Satellites And Space Systems Ii), Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A syllabus created by Professor Bob Twiggs for Space Systems Engineering 122 (Satellites and Space Systems II) taught at Morehead State University in the Spring of 2016.

Lunar Icecube Space Mission, Robert J. Twiggs, Eric Jerde

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professors Bob Twiggs and Eric Jerde titled "Lunar IceCube Space Mission" from March 1, 2016.

Overview Of Eps-1 For Spacecraft, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on an "Overview of EPS-1 for Spacecraft" from Febuary 15, 2016.

Overview Of Eps-2 For Spacecraft, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on an "Overview of EPS-2 for Spacecraft" from February 15, 2016.

Citizen Satellite: A Way To Have Low Cost Space Missions For The Unordinary Innovator, Robert J. Twiggs, Amin Djamshidpour, Ted Tagami, Tony So

Robert "Bob" Twiggs STEM Education Collection

A report written by Robert Twiggs, Amin Djamshidpour, Ted Tagami, and Tony So on February 9, 2016.

Hybrid Clutch Assembly For An Aircraft, Richard P. Anderson, Charles N. Eastlake, Matt Gonitzke, Glenn P. Greiner

Publications

A hybrid clutch assembly inserted between an internal com bustion engine and the propeller of an aircraft to provide a hybrid-powered aircraft. The hybrid clutch assembly allows a direct current (DC) electric motor to be attached to the hybrid clutch assembly using drive belts. The hybrid clutch assembly allows the internal combustion engine to transmit power to the aircraft's propeller and freely spin the DC motor. The DC motor can transmit power to the aircraft's propeller without turning the internal combustion engine. The hybrid clutch assembly independently allows either the internal combus tion engine or the DC motor in parallel …

Tu-Pod: Deployment Mechanism & Antenna Mounting, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Tu-POD: Deployment Mechanism & Antenna Mounting" from February 8, 2016.

Tu-Pod: Safety Review, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Tu-POD: Safety Review" from February of 2016.

Lift & Drag Reductions On Iced Wings During Take Off And Landing With Unmanned Aerial Vehicles, Ian R. Mcandrew

Publications

This research paper addresses an novel problem that has not been addressed in detail for many decades. Ice formation on aircraft has procedures and protocols to deal with expected and actual problems. Complex modern aircraft are equipped with a variety of techniques to remove Ice formation on an aircraft, especially the wings. The introduction of Unmanned Aerial Vehicles has added an old problem, that of low speed and the lack of power to overcome losses in lift through ice formation. In this research the different types of Ice formation, how they combine and affect Lift and Drag are also addresses …

Determining The Runway Point-Of-No-Return For Landing Roll Go-Around In Transport Category Airplanes, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Early Afternoon Concurrent Panel Sessions: Commercial Space Industry Snapshot: Presentation: Small Catapult-Assisted Horizontal-Launch Reusable Rbcc Ssto Spaceplane For Economical Short-Duration Leo Access, Nihad E. Daidzic,

Aviation / Aeronautics / Aerospace International Research Conference

This article discusses the conceptual design, flight trajectory calculations, and utilization of the possible future horizontally-launched reusable Single-Stage-to-Orbit (SSTO) spaceplane for small payload short-duration manned/unmanned access to Low-Earth-Orbit (LEO). The 10,000 lb spaceplane would use 5,000 ft catapult-assist horizontal-launch facility and conduct powered approach and landing on conventional horizontal paved runways following the gliding atmospheric re-entry. To increase the economy of operation, the launch facility located at high elevations (4,000+ ft) equatorial region is required, such as, the plateaus in Kenya and Tanzania in Africa and/or Ecuador in South America. A 500-lb payload, including pilot-commander, is envisioned. The propulsion cycle …

General Solution Of The Wind Triangle Problem And The Critical Tailwind Angle, Nihad E. Daidzic

Aviation Department Publications

A general analytical solution of the navigational wind-triangle problem and the calculation of the critical tailwind angle are presented in this study among other findings. Any crosswind component will effectively create a headwind component on fixed course tracks. The meaning of a route track is lost with excessive crosswinds representing the bifurcation point between the possible and the impossible navigational solutions. Any wind of constant direction and speed will effectively reduce groundspeed and increase time-of-flight on closed-loop multi-segment flights. Effective wind track component consists, in general, of true and induced components. The average groundspeed of multiple-leg flights is a harmonic …

Drone Journalism Lab Operations Manual, Matt Waite, Ben Kreimer

College of Journalism and Mass Communications: Faculty Publications

This text is a guide for safely conducting drone journalism field work. It takes into account America's current drone regulations, our understanding of the public's acceptance of drones, the state of drone technologies, and our own experiences. The number one goal of any drone journalism operation is safety. At no time should safety be compromised. If there is any doubt, return the drone, also known as an unmanned aerial system (UAS), to the landing zone and terminate the flight. Ethical journalism is responsible journalism, and flying a drone means taking responsibility for the safety of those near you, on the …

Use Of A Small Unmanned Aerial System For The Sr-530 Mudslide Incident Near Oso, Washington, Robin Murphy, Brittany Duncan, Tyler Collins, Justin Kendrick, Patrick Lohman, Tamara Palmer, Frank Sanborn

School of Computing: Faculty Publications

The Center for Robot-Assisted Search and Rescue deployed three commercially available small unmanned aerial systems (SUASs)—an AirRobot AR100B quadrotor, an Insitu Scan Eagle, and a PrecisionHawk Lancaster—to the 2014 SR-530 Washington State mudslides. The purpose of the flights was to allow geologists and hydrologists to assess the eminent risk of loss of life to responders from further slides and flooding, as well as to gain a more comprehensive understanding of the event. The AirRobot AR100B in conjunction with PrecisionHawk postprocessing software created two-dimensional (2D) and 3D reconstructions of the inaccessible “moonscape” region of the slide and provided engineers with a …

Comparisons Of Ablator Experimental Performance To Response Modeling And Effects Of Water Phase Transition In Porous Tps Materials, David L. Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

The Mars Science Laboratory Entry Descent and Landing Instrumentation (MEDLI) project performed extensive arc jet tests for development, qualification, and calibration of instrumented heat shield plugs. These plugs each contained several thermocouples for recording near-surface and in-depth temperature response of the Phenolic Impregnated Carbon Ablator (PICA) heat shield. The arc jet test results are entered into a comprehensive database so that broad trends across the test series can be compared. One method of analysis is to compare with ablator material response calculations and solve the in-depth heat conduction equations. Using the near-surface thermocouple measurements as a boundary condition in numerical …

First-Year Project Experience In Aerospace: Apogee Determination Of Model Rockets With Explicit Consideration Of Drag Effect, Hüseyin Sarper, Drew Landman, Linda Vahala

Electrical & Computer Engineering Faculty Publications

This paper describes a student team project using model rockets and engines to learn engineering solution methods for determining the apogee of model rocket when the drag effect is considered explicitly instead of estimating its effect later. Model rocketry is a powerful tool for instructors who wish to incorporate science, engineering, and mathematics into a fun, engaging, and challenging activity for the students. The apogee can be determined using a number of distinct methods: trigonometry, onboard altimeters, analytical calculations, and simulation. This paper emphasizes numerical analytical solution using spreadsheet programming instead of a full analytical solution that requires higher mathematics. …