Aeronautical Vehicles Commons^™

Controller Software: Evolution, Identification, And Implementation, Balaji Balasubramaniam

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

In the annals of automation history and advancement, one can find control technology is at the core. Modern-day controllers rely heavily on software capability to provide stability and improve the system's performance. In particular, drone flight controllers use autopilot control software to accomplish autonomous navigation from take-off to landing. However, we know very little about how the controller code modifications and its impact, particularly at the software level. No general framework has been developed to identify the control code changes and observe the real values of software control loops at the kernel layer.

In this thesis, we lay the foundation …

Drone Cage Design And Implementation To Enable Small Drone Architecture Testing, Marco Fagetti, Emily M. Suh

Undergraduate Student Works

Geometric mechanics is a dynamical formalism that allows for simultaneous treatment of rotational and translational motion without the drawbacks of attitude parameterization sets. While geometric mechanics is well suited to deal with full six degree-of-freedom motion or significant position-attitude coupling, this formalism has yet to be extensively applied to hardware systems. The broader research goals of this work aim to prove the practical viability of this theoretical framework by applying it to a class of Crazyflie drones, which are frequently used to assess Guidance, Navigation, and Control schemes. To efficiently achieve these goals, a reliable, collapsible drone cage is required …

Measurements Of Wind Turbine Wake Evolution And Trajectory During Morning Boundary Layer Transition And Under Wake Steering Conditions Via Unmanned Aerial Vehicles, Stewart Nelson

Theses and Dissertations--Mechanical and Aerospace Engineering

In July of 2019, a flight campaign was conducted using semi-autonomous Unmanned Aerial Vehicles (UAVs) at the Port Alma Kruger Energy wind farm in Ontario, Canada, to study various aspects of wind turbine wake evolution. Horizontal transects across the wakes were measured using modified fixed-wing aircraft fitted with a five-hole probe to measure the wind velocity vector. Reference boundary layer conditions were measured by an octocopter with an assortment of mounted sensors flying vertical profiles upstream of the turbines. Three experiments were conducted during the campaign, which consisted of a study on wake behavior during the morning boundary layer transition, …

Aerodynamic And Aeroacoustic Performance Of Small Uav Propellers In Static Conditions, William Jordan, Robert W. Deters, Shreyas Narsipur

Publications

The proliferation of small multi-rotor UAVs in commercial, recreational, and surveillance spheres has garnered significant interest in the noise produced by these vehicles. The current research aims to study the relationship between the aerodynamic performance and acoustic characteristics of small-scale UAV propellers. Three commercially available propellers for the DJI Phantom 2/3 UAV were selected for preliminary development and validation of an aeroacoustic experimental test setup and associated data reduction methods. Propeller thrust, torque, and power measurements were recorded at static conditions. Upon successful validation of the test bench, acoustic measurements were taken at the propeller disk’s upstream and in-plane locations. …

Performance Testing Of Aero-Naut Camfolding Propellers, Or D. Dantsker, Robert W. Deters, Marco Caccamo, Michael S. Selig

Publications

The increase in popularity of unmanned aerial vehicles (UAVs) has been driven by their use in civilian, education, government, and military applications. However, limited on-board energy storage significantly limits flight time and ultimately usability. The propulsion system plays a critical part in the overall energy consumption of the UAV; therefore, it is necessary to determine the most optimal combination of possible propulsion system components for a given mission profile, i.e. propellers, motors, and electronic speed controllers (ESC). Hundreds of options are available for the different components with little performance specifications available for most of them. By examining a variety of …

Propulsion System Testing For A Long-Endurance Solar-Powered Unmanned Aircraft, D. Dantsker, Robert Deters, Marco Caccamo

Publications

The increase in popularity of unmanned aerial vehicles (UAVs) has been driven by their use in civilian, education, government, and military applications. However, limited on-board energy storage significantly limits flight time and ultimately usability. The propulsion system plays a critical part in the overall energy consumption of the UAV; therefore, it is necessary to determine the most optimal combination of possible propulsion system components for a given mission profile, i.e. propellers, motors, and electronic speed controllers (ESC). Hundreds of options are available for the different components with little performance specifications available for most of them. In order to determine the …

Design And Implementation Of Intelligent Guidance Algorithms For Uav Mission Protection, Karina Rivera

Doctoral Dissertations and Master's Theses

In recent years, the interest of investigating intelligent systems for Unmanned Aerial Vehicles (UAVs) have increased in popularity due to their large range of capabilities such as on-line obstacle avoidance, autonomy, search and rescue, fast prototyping and integration in the National Air Space (NAS). Many research efforts currently focus on system robustness against uncertainties but do not consider the probability of readjusting tasks based on the remaining resources to successfully complete the mission. In this thesis, an intelligent algorithm approach is proposed along with decision-making capabilities to enhance UAVs post-failure performance. This intelligent algorithm integrates a set of path planning …

Experiments Of Propeller-Induced Flow Effects On A Low-Reynolds-Number Wing, Gavin K. Ananda, Robert Deters, Michael S. Selig

Publications

Novel findings are discussed in this paper that will be especially beneficial to designers and modelers of small-scale unmanned air vehicles and high-altitude long-endurance vehicles that both operate at low Reynolds numbers (Re = 50,000-300,000). Propeller-induced Oow effects in both tractor and pusher configurations on a recta ngular wing using the Wortmann FX 63-137 airfoil (a common low-Reynolds-number high-lift airfoil) are presented in this paper . Significant performance benefits can be found for a wing in the tractor configuration. Experiments, including trip tests and upper-surface oil Dow visualization, show and verify that the propeller slipstream induces early transition to turbulent …

Development Of A Small Unmanned Aerial Vehicle Longitudinal Model For Future Flutter Testing, Said S. Hamada

Doctoral Dissertations and Master's Theses

This thesis presents the system identification of the longitudinal motion of a small unmanned aerial vehicle with flexible characteristics. The unmanned aerial vehicle of study is an off-the-shelf aircraft with limited knowledge about the dynamic model. The first task in obtaining a model for flutter testing is determining the rigid body model. Specifically, this thesis will focus in the development of the aircraft and obtaining the longitudinal rigid body model. This involves the assembly and configuration of the avionics and sensors, performing experiments to determine mass and inertia properties and using software tools for aerodynamic analysis to get preliminary values …

Aerodynamic Analysis Of Low Speed Wing Design Using Taguchi L9 Orthogonal Array, Kenneth Witcher, Ian Mcandrew, Elena Vishnevskaya

Publications

The study of aerodynamics has been preoccupied with understanding flight at increasing speeds and ultimately supersonic. Today, this pursuit has advanced the science for both Hypersonic and Transonic flight to near Mach 1 supporting economical commercial flight operations. This research presents the data from a Taguchi array on low speed with twin wing designs to establish the design parameters for their use in low speed and high altitude. Also presented is how aerodynamic advantages can be achieved through understanding the interactions of parameters and their use. This is compared to operational effectiveness when applied to remotely piloted aircraft that are …

Ten Years Of The Real World Design Challenge, Robert W. Deters, Brent Terwilliger, S.C. Kleinke, Ralph K. Coppola, Jeff Coppola

Publications

Preparing students to be successful in STEM careers is important to foster continued growth in the US and the world. The Real World Design Challenge is a high school design competition focused on the area of aviation. Students work in teams to solve a real world problem using professional tools. The 2018 challenge marks the tenth anniversary of this program. The first students to compete in this competition are now in the work force. This paper describes the background of RWDC, the different challenges that have been used throughout its ten years, the current precision agriculture challenges using UAS, and …

Design, Development And Implementation Of Intelligent Algorithms To Increase Autonomy Of Quadrotor Unmanned Missions, Diego F. Garcia Herrera

Doctoral Dissertations and Master's Theses

This thesis presents the development and implementation of intelligent algorithms to increase autonomy of unmanned missions for quadrotor type UAVs. A six-degree-of freedom dynamic model of a quadrotor is developed in Matlab/Simulink in order to support the design of control algorithms previous to real-time implementation. A dynamic inversion based control architecture is developed to minimize nonlinearities and improve robustness when the system is driven outside bounds of nominal design. The design and the implementation of the control laws are described. An immunity-based architecture is introduced for monitoring quadrotor health and its capabilities for detecting abnormal conditions are successfully demonstrated through …

Uav As A Service: Providing On-Demand Access And On-The-Fly Retasking Of Multi-Tenant Uavs Using Cloud Services, Justin Yapp

Doctoral Dissertations and Master's Theses

As commercial roles for Unmanned Aerial Vehicles (UAVs) become more well-defined and demand for the services provided by them increases, UAVs rely more on new cloud computing services and co-operative coordination to provide mission planning, control, tracking and data processing. We present UAV as a Service (UAVaaS) framework, which brings features commonly found in traditional cloud services, such as Infrastructure, Platform, and Software as a Service, to the domain of UAVs. Our work aims to conceptualize and design UAVaaS for commercial applications. Specifically, a cloud-provided orchestration framework that allows multi-tenant UAVs to easily serve multiple heterogenous clients at once and …

Lift & Drag Reductions On Iced Wings During Take Off And Landing With Unmanned Aerial Vehicles, Ian R. Mcandrew

Publications

This research paper addresses an novel problem that has not been addressed in detail for many decades. Ice formation on aircraft has procedures and protocols to deal with expected and actual problems. Complex modern aircraft are equipped with a variety of techniques to remove Ice formation on an aircraft, especially the wings. The introduction of Unmanned Aerial Vehicles has added an old problem, that of low speed and the lack of power to overcome losses in lift through ice formation. In this research the different types of Ice formation, how they combine and affect Lift and Drag are also addresses …

Ehawk: Uav - Remote Launch Of Unmanned Aerial Vehicles Kite Based System, Matthew R. Rossett

Theses and Dissertations

Unmanned aerial vehicles, also known as UAVs or drones, are becoming favorable assets in multiple fields. Along with this new technology comes new improvements, including the EHAWK: UAV system, a proposed system to increase the range of UAVs by providing an alternate method for launching. The EHAWK: UAV is a kite based system for launching UAVs. The system uses a kite which acts as a sky anchor or fixed point in the sky. A tether is attached from the kite to the ground. A shuttle device then attached to the tether line. That shuttle carries the UAV up the line …

Slipstream Measurements Of Small-Scale Propellers At Low Reynolds Numbers, Robert W. Deters, Gavin K. Ananda, Michael S. Selig

Publications

The continuing growth in the use of small UAVs has required the need to more fully understand the propellers that power them. Part of this understanding is the behavior of the propeller slipstream. Using a 7-hole probe, the slipstreams of several small-scale propellers (diameters of 4.2, 5, and 9 in) were measured in both static (V∞ = 0) and advancing-flow (V∞ > 0) conditions at several locations downstream. For static conditions, as the slipstream expanded downstream, the maximum values of the axial and swirl velocities decreased. The general shape of the static slipstream was also found to be nearly the same …

A Midsummer Night’S Dream (With Flying Robots), Robin Murphy, Dylan Shell, Amy Guerin, Brittany Duncan, Benjamin Fine, Kevin Pratt, Takis Zourntos

School of Computing: Faculty Publications

Seven flying robot “fairies” joined human actors in the Texas A&M production of William Shakespeare’s A Midsummer Night’s Dream. The production was a collaboration between the departments of Computer Science and Engineering, Electrical and Computer Engineering, and Theater Arts. The collaboration was motivated by two assertions. First, that the performing arts have principles for creating believable agents that will transfer to robots. Second, the theater is a natural testbed for evaluating the response of untrained human groups (both actors and the audience) to robots interacting with humans in shared spaces, i.e., were believable agents created? The production used two types …