Architectural Engineering Commons^™

Measurement Of Volumetric Deformation, Strain Localization, And Shear Band Characterization During Triaxial Testing Using A Photogrammetry-Based Method, Sara Fayek, Xiong Zhang, Xiaolong Xia, Qingqing Fu, Jeffrey D. Cawlfield

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Triaxial Testing Has Been Routinely Used as a Standard Laboratory Test that Allows Correct Determination of Soil Characteristics. Previously the Volumetric Strain of the Triaxial Specimen Was Considered to Be Uniformly Distributed Along with the Specimen during the Isotropic and Deviatoric Loading. Although This Assumption Might Hold True under Isotropic Loading, the Effects of Restrained Ends and Disturbance during the Procedures of Specimen Installation and Testing Can Cause Nonuniform Strains throughout the Whole Specimen. This Paper Investigates the Effects of Specimen Preparation and Misalignment on the Strain Uniformity Along with the Soil Specimen during Triaxial Testing. a Series of Consolidated …

Point Density For Soil Specimen Volume Measurements In Image-Based Methods During Triaxial Testing, Sara Fayek, Xiong Zhang, Javad Galinmoghadam, Jeffrey D. Cawlfield

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Discrete Measurement Targets Were Frequently Utilized in Image-Based Methods on the Specimen's Surface to Monitor the Soil Specimen during Triaxial Testing. However, the Required Density of Measurement Targets that Should Be Used in Triaxial Testing to Achieve Highly Accurate Volume Measurement Has Not Been Investigated. to overcome This Limitation, This Paper Presents a Parametric Study to Determine the Optimum Target/point Densities to Be Utilized on the Triaxial Soil Specimen Surface to Achieve the Desired Level of Volume Measurement Accuracy in Image-Based Methods. LiDAR Scanning Was Applied to Establish the "Ground Truth" Volume of the Specimen. the Effects of Deformation and …

Analytical And Numerical Behavior Of Double Composite Steel Bridges, Emad M. Hassan, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel plate girders are considered a viable solution for the construction of medium- to long-span bridges. Despite their many advantages, various concerns have been raised regarding their maintenance due to the potential of fatigue crack initiation at welded details, accelerated corrosion in thin webs, and trapped debris around stiffeners. The use of rolled beams, on the other hand, can be very beneficial because they require much less maintenance. However, they are limited in size, which imposes constraints on their use to relatively short-span bridges due to deflection requirements. In this study, the behavior of the double composite superstructure system was …

An Insight Into The Effect Of Sharp And Round Edges On The Flow Field-A Cfd Simulation, Abid Hussain, Gao Puzhen, M. Mustafa Azeem, Muhammad Zubair, Muhammad Aamir, Muhammad Irfan Khaleed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents a numerical investigation of pressure drop and distribution in a channel around a sharp edge and a disc that is connected to the base of a circular rod. We have employed computational fluid dynamics (CFD)-Fluent for the validation of our models. It was found that the edge sharpness of the disc influences the pressure drop., i.e. sharp edge has higher turbulence and pressure drop. We also observed that pressure drops in the case of the circular disc are less than that of the sharp edge. However, pressure drop has essentially the same values for both shapes after …

Dissipated Hysteretic Energy Reconstruction For High-Resolution Seismic Monitoring Of Instrumented Buildings, Milad Roochi, Eric M. Hernández, David V. Rosowsky

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper proposes a high-resolution seismic monitoring framework that employs dissipated energy as a feature for damage detection and localization in instrumented building structures. The the methodology consists of (1) implementing a nonlinear state observer to reconstruct the dynamic response at all degrees of freedom (DoF) of a structural model, (2) employing the reconstructed response to estimate element-by-element forces and displacements, and (3) using estimated displacement, forces, and constitutive laws to estimate elementlevel dissipated energy. The main advantages of the proposed energy-based approach are that i) the proposed feature is physically meaningful and correlates well with the level of cyclic …

Variation Of Moisture Content And Temperature Under The Road Shoulder Improved With Wicking Geotextile, Javad Galinmoghadam, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Several Pavement Distresses Are Associated with Excess Water in the Pavement System. Hence, Controlling Subsurface Water is Crucial to Pavement's Long-Term Performance. Improving Pavement Drainage is Commonly Used to Control the Water Content in Pavement Layers. Conventional Drainage Systems Can Work under Saturated Conditions but Cannot Effectively Drain Capillary Water. a New Type of Wicking Geotextile Has Been Developed that Can Drain Water under Both Saturated and Unsaturated Conditions. in This Study, the Performance of This New Type of Geotextile in Draining Water from a Paved Road Shoulder is Evaluated. a Full-Scale Test Section Along Interstate 44 Was Constructed and …

Field Reconnaissance And Observations From The February 6, 2023, Turkey Earthquake Sequence, Gulen Ozkula, Robert K. Dowell, Tugce Baser, Jui Liang Lin, Ozgun A. Numanoglu, Okan Ilhan, C. Guney Olgun, Cheng Wei Huang, Tunc Deniz Uludag

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

On February 6, 2023, a sequence of earthquakes hit Kahraman Maras, Turkey, with magnitudes of M w = 7.8 and 7.5, at 4:17 am and 1:24 pm local time, respectively. According to the records, the M w = 7.8 event was the biggest earthquake since the 1939 Erzincan earthquake of the same magnitude and second-strongest recorded after the 1668 North Anatolia Earthquake. However, it was the most devastating earthquake in the history of Turkey in terms of structural and geotechnical damage and fatalities caused by this. The objective of this article is to explore the aftermath of this major seismic …

Nucleotide Detection Mechanism And Comparison Based On Low-Dimensional Materials: A Review, M. Mustafa Azeem, Muhammad Shafa, Muhammad Aamir, Muhammad Zubair, Basma Souayeh, Mir Waqas Alam

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various …

Extending The Nno Ballistic Limit Equation To Foam-Filled Dual-Wall Systems, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A key component in the quantitative assessment of the risk posed to spacecraft by the micrometeoroid and orbital debris (MMOD) environment is frequently referred to as a ballistic limit equation (BLE). A frequently used BLE for dual-wall configurations (which are commonly used on spacecraft to protect them against the MMOD environment) is the New Non-Optimum, or "NNO", BLE. In design applications where a BLE is needed for a new structural system that has not yet been tested, but resembles to a fair degree a dual-wall system, it is common practice to equivalence the materials, thicknesses, etc., of the new system …

Evaluation Of Thermal And Rheological Properties Of Phase Change Material-Incorporated Asphalt Mastic With Porous Fillers, Farshad Saberi Kerahroudi, Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Incorporating phase change material (PCM) into paving materials can regulate the pavement temperature, improve the pavement durability, and mitigate the heat-island effects. In this research, porous fillers were used as the PCM carrier, and the thermal and rheological behaviors of the asphalt mastic with the PCM were evaluated. Two different carrier materials (diatomite and expanded perlite) and four types of PCMs were used in the study. The candidate filler, PCM, and proper blending ratios were determined based on the results of scanning electron microscope image analysis, the filter paper test, and the temperature sweep test. The thermal and rheological behaviors …

Economic Impact Of Land Use Planning (Transit-Oriented Development): A Comparative Analysis, Sam M

West Chester University Doctoral Projects

The problem explored in this mixed-method research is that many cities are unprepared for urban growth, which can only increase poverty and crime. The traditional transportation system is inadequate to support the increase of urbanism; it is responsible for polluting the air, increasing greenhouse gases, and losing thousands of lives annually due to car crashes and road-related accidents. The transportation sector is responsible for 28% of the overall greenhouse gas emissions (Environmental Protection Agency, 2018), and the economic costs of vehicle crashes in the United States totaled $340 billion (Department of Transportation, 2019).

This study aimed to measure how Transit …

Integrating Life-Cycle Analysis Into Civil Infrastructure Resilience Decision Making: Illustrative Application To Seismic Resilience Modeling Of Us Communities, Milad Roohi, Jiate Li, W. Van De Lindt

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper aims to integrate life-cycle analysis into civil infrastructure resilience modeling and decision-making in seismic-prone communities. To achieve this aim, the authors present a methodology for modeling seismic life-cycle resilience of interdependent buildings and lifeline systems and subsequently informing resilience decisions directly related to the maintenance and retrofit of interdependent infrastructure to enhance a community’s physical, social, and economic systems. The methodology consists of 1) community data collection, 2) seismic hazard analysis, 3) physical damage analysis, and 4) system-level functionality and restoration analysis, 5) socio-economic impact analysis, 6) life-cycle optimization and retrofit decisionmaking. The methodology begins by developing geospatial …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …

Green Roofs To Treat The Local Dwelling Environment Problems Within Egypt's Vision 2030, Abdullah Badawy Mohammed

Mansoura Engineering Journal

The continuous increase in the building ratio to green areas led to disappearing green spaces, and the vertical and horizontal expansion of dwellings as an urgent demand in cities led to various environmental, social, and economic risks. Hence, the research aims to facilitate the application of green roofs for their positive role in treating these risks and improving the performance of dwelling projects and all buildings according to the climate and local conditions. Therefore, the study addressed the history, concept, and significance of green roofs, besides their benefits on architectural and urban levels, according to the three sustainability pillars and …

Cold-Formed Steel Strength Predictions For Combined Bending And Torsion, Yu Xia, Robert S. Glauz, Benjamin W. Schafer, Michael Seek, Hannah B. Blum

Engineering Technology Faculty Publications

Locally slender cross-section members, such as cold-formed steel Cee and Zee sections, are susceptible to significant twisting and high warping torsion stresses. Torsion considerations are complicated by whether it is derived as a first-order effect from loading or a second-order effect from instability. The current design for combined bending and torsion interaction has some limitations, including only considering the first yield in torsion and ignoring the cross-section slenderness in torsion. Previous work has derived a simple uniform equation to predict the bimoment capacity and two bimoment strength curves for local and distortional buckling under torsion only. This work is extended …

A Review On Sustainable Disposal Of Plastic Waste By Integration In Construction Materials, Yara S. El-Metwally, Iman El-Mahallawi, Khaled M. Dewidar, Mostafa R. Refaat

Architectural Engineering

Over the last decades, plastic waste (PW) has increased exponentially and has become a serious threat to our planet, aquatic system and human health. Recycling or reusing PW in producing ecofriendly materials is an efficient solution to reduce plastic pollution and to minimize the depletion of raw materials as well. Previous studies have shown promising potentials of using PW in the construction sector, such as binder, aggregate, or substitute of cement and sand in concrete, brick or mortar. Laboratory results indicate that implementing plastic waste as aggregates in cement composites obtains higher thermal resistance and acoustical performance. However, a reduction …

2022 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Energy Efficiency Retrofit And Decarbonization Of Old And Historic Buildings In California, Daria Nikolaeva

Master's Projects and Capstones

Buildings are responsible for almost 40% of total global greenhouse gas emissions and the retrofitting of existing buildings is an essential part of solving the problem. About 75% of buildings in Californian were constructed before the first energy-efficiency building code was adopted in 1978. Old buildings are inefficient, responsible for large carbon footprints and must be retrofitted to stay on track with the state's climate targets. However, current policies do not require substantial changes and tend to favor historic preservation over energy efficiency, missing improvement opportunities. Recognizing the significance of carbon intensity, the 2019 California Energy Efficiency Action Plan shifted …

Applying Unsupervised Machine Learning Clustering Techniques To Early Childcare Soundscapes, Kenton Hummel, Erica E. Ryherd, Iason Konstantzos, Abbie Raikes

Durham School of Architectural Engineering and Construction: Faculty Publications

Early childhood is a critical time period for language, brain, cognitive, and social/emotional development. Out-of-home childcare is a normative, typical experience for millions of young children. Although Indoor Environmental Quality (IEQ) in K-12 settings has received recent, significant attention, the links between IEQ and children’s learning and development in early childcare settings is a less understood topic. This work focuses specifically on the sound aspect of IEQ in early childcare settings to better understand typical noise levels and occupant experience. Standard approaches to analyzing background noise will be presented alongside more detailed statistical analyses utilizing unsupervised machine learning clustering techniques. …

Mars 2100: A Microcosm Of Ecocentric Design, Andrea Hoe

Architecture Thesis Prep

In the dystopian future of 2100, Earth becomes a dying planet and humanity is forced to continue colonizing the solar system for survival. Mars develops as a colonized planet, exploited for its natural resources and potential. The hierarchical system of power seen constantly throughout Earth’s history was inescapable, and poor conditions turned to extremes. As billionaires take control of the space race, the capitalist system reflected in past company towns was implemented, making the moral questions and lines blurred.

When the system is eventually ruptured, ecosystemic living is proposed. Living is now centered around health and mindfulness, creating a system …

Tectonic Thresholds: Reclaiming Space Through Geomorphological Design, Amreeta Verma

Architecture Thesis Prep

This research posits that a revitalization of indigenous earth architecture practices in a contemporary context can mitigate the immense waste and embodied carbon in the construction industry. Earth materials are the focus of this research because they are locally sourced, abundantly available, and can be reused or returned to the natural environment, when utilized in a circular consumption cycle. Designing for reuse reduces the impact of construction waste on the burgeoning issue of environmental degradation and resource depletion.

The structural viability and environmental enclosure capabilities of soil throughout its lifecycle will be tested in different forms derived geomorphically from the …

The Ark: Sanctuary For Isfs, Zejun Sun, Wei Wei Li

Architecture Thesis Prep

The thesis is aiming to decrease the potential flooding damages to the ISFs, and a balance between the limited resources and high population density to relieve the flooding issues through the renovation and reconstruction of local churches in the Baseco Compound.

Flooding has become one of the most common and devastated issues in developing countries, and it is worsen by the housing crisis that lead to a formation of informal settlements with shoddy constructions and destabilized communities. What is an applicable approach to decrease the potential flooding damage to the ISFs? How to find a balance between the limited resources …

Use Of Precious Plastic Method Of Bricks For The Construction Of Tiny Homes, Haylie E. Tallon

Architectural Engineering

Precious Plastics, a Netherlands based company, created an open source project that can be used to create different objects from recycled plastics. The San Luis Obispo area has a large amount of recyclable plastic that is being treated as trash, adding to the pollution of the ocean and the air. This project is to determine the necessary steps to create plastic building blocks, using the Precious Plastic process, as a construction material for low-income, temporary housing. This report covers the process that was used to build two of the machines that will be used to create the bricks. This requires …

Dissolve Of Living Space: Living Space Under The Development Of Metaverse, Wenting Feng, Nuo Lyu

Architecture Thesis Prep

According to our vision, in the future, after the use of the metaverse becomes popular, we will spend a lot of time working, living and playing in the metaverse. The space needed in reality will be reduced by the use of the metaverse, and public buildings will be retained or not depending on the nature of the building. Because the focus of human life shifts from reality to the metaverse, energy and material consumption will also be reduced, and environmental problems can be properly alleviated. The nature in the real city will also be expanded by the reduction of the …

Reciprocal Frames: The Flat Beam Grillage, Cesar Noe Jimenez Ramirez, Nicholas Sowatzke

Architectural Engineering

This report follows the pursuit of attaining information and researching academic resources regarding the elusive reciprocal frame structures throughout history, in particular the flat beam grillage. In the following pages, the reader should expect to learn about reciprocal frames in a historical context throughout the globe, as well as, gain insight on how to potentially analyze these frames when they span two-dimensionally. As seen in Figure 1 (Pugnale 2011) and Figure 2 (Godthelp 2019), reciprocal frame structures consist of multiple groups of three or more members that are mutually supported. Along the perimeter of the structure, the members are supported …

The Bridge Newsletter Winter 2022, Missouri University Of Science And Technology

The Bridge Newsletter

-Missouri S&T CO2 research is rock solid
-Bringing circular economy to construction projects
-Ph.D. graduate wins Fellowship for solar farm protection research
-Rockne presents 2022 Mathes Lecture on ways to evolve engineering education
-Missouri S&T Ph.D. graduate wins $70,000 Laegeler Fellowship for solar farm protection research

Adaptive Façades’ Technologies To Enhance Building Energy Performance And More, Kawther Ahmed Hameedaldeen, Ahmed Omar M.S. Mostafa

Emirates Journal for Engineering Research

With the increased enrolment the digital technologies and modern computer applications in AEC industry, a parallel increase and upgrade happened in the work competition leading to new benchmarks in such fields. The importance of these technologies increased with their investment of improving energy consumption in buildings, which represents a world crisis. The problem got worse in hot arid desert zones, as the case of some regions in KSA, where most users tend to spend most of their time in internal air-conditioned spaces, which led to the increase of the consumption of cooling energy, that reach 40% of the total Energy …

Basalt Fibers For Underwater Fatigue Repair Of Steel Panels, Guillermo Riveros, Emad M. Hassan, Lauren Hudak, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fatigue damage is a major threat to the safety and integrity of many steel structures. Steel hydraulic structures (SHS), in particular, experience fatigue loading during operation and are exposed to harsh environmental conditions that can further reduce fatigue life through mechanisms. The traditional inspection and repair process for SHS is time-consuming and leads to economic losses. Studies investigating the behavior and advantages of using bonded carbon fiber-reinforced polymer (CFRP) to repair fatigue cracks in SHS are lacking. The main objectives of this study are to increase the bonding of CFRP, investigate the effectiveness of different fiber-reinforced polymers, and test different …

Analysis Of The Relationship Between Ieq And Energy Consumption In Uae University Building: Impact Of Thermal And Lighting Comfort On Energy Usage, Salama Abdulla Al Ghaithi

Theses

The Indoor Environment Quality (IEQ) of buildings becomes increasingly critical as people spend more than 90% of their time inside buildings based on the National Human Activity Pattern Survey (NHAPS) (Klepeis et al., 2001). The quality of the indoor environment in a building has been shown to have a significant impact on users' productivity and energy consumption. Further, if tenants are working in a comfortable indoor environment, absenteeism rates and incidental expenses, such as medical expenses, will be reduced. For instance, a comfortable workplace increases productivity by 10-15% and reduces absenteeism by 2.5% (Leyten & Boerstra, 2003). According to the …

“Biophilia As A Sustainable Design Approach For University Buildings Design: A Case Study In University Campus Drawing Studios Cairo, Egypt, Amira Mohamed Mahrous, Khaled M. Dewidar, Mostafa Mohamed Refaat, Ashraf Nessim

Architectural Engineering

University campuses have a long history of enriching the social, cultural, and economic value of societies. Worldwide, there is a rising demand for the integration of new approaches into the planning and design of university buildings to further improve their quality. According to the literature, many approaches needed to be considered while designing university buildings that can enhance students’ performance. Biophilic design is known to have enhancing levels of interaction, and interaction patterns, enhancing health and wellbeing in terms of physiological, psychological, cognitive, and social/ spiritual benefits, while rigorous scientific evidence that supports such claims is rare. Many researchers have …