Architectural Engineering Commons^™

Modular House Design Study, Jordan J. P. Smith

Architectural Engineering

The Modular House is a student designed and constructed structure in Poly Canyon. For decades it served as a home for the Canyon’s caretakers who maintained the structures, looked over the Canyon, and helped construct student projects. After being abandoned for a variety of reasons, the structure now currently stands as an open-air pavilion.

This project studies The Modular House as a unique and storied site and proposes a theoretical retrofit to make the structure habitable again. Historical documents, past senior projects, images, and firsthand accounts were reviewed to understand the site’s history and how it changed over time. In …

Evaluation Of Structural Retrofit Of A Hillside Home, Cameron C. R. Cunningham

Architectural Engineering

On November 24, 2021 after months of initial planning, the project owner received approval from the San Luis Obispo Planning and Building Department for initial work on a residential remodeling submission. This approval including a grading permit and other initial site work to begin renovation of the owner’s hillside residential property.

Basalt Fibers For Underwater Fatigue Repair Of Steel Panels, Guillermo Riveros, Emad M. Hassan, Lauren Hudak, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fatigue damage is a major threat to the safety and integrity of many steel structures. Steel hydraulic structures (SHS), in particular, experience fatigue loading during operation and are exposed to harsh environmental conditions that can further reduce fatigue life through mechanisms. The traditional inspection and repair process for SHS is time-consuming and leads to economic losses. Studies investigating the behavior and advantages of using bonded carbon fiber-reinforced polymer (CFRP) to repair fatigue cracks in SHS are lacking. The main objectives of this study are to increase the bonding of CFRP, investigate the effectiveness of different fiber-reinforced polymers, and test different …

Retrofit Of Concrete Moment Frames With Masonry Infill In High Seismic Zones, Patricia Francis Pope, Madeleine Rasmussen, Zorana Tat

Architectural Engineering

Seismic events happen all throughout the world and each country has a slightly different way of handling the design of structures subjected to seismic forces. The goal of this project is to provide citizens of the Philippines with an effective way to retrofit their potentially unsafe buildings in the event of an earthquake. However, this retrofit manual will be able to help globally in other third world countries that have similar building techniques. In order to achieve this type of solution, we had to come up with options that took into account the lack of access to tools, materials, and …

Use Of Fiber-Reinforced Cements In Masonry Construction And Structural Rehabilitation, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

The use of fiber reinforcement in traditional concrete mixes has been extensively studied and has been slowly finding its regular use in practice. In contrast, opportunities for the use of fibers in masonry applications and structural rehabilitation projects (masonry and concrete structures) have not been as deeply investigated, where the base matrix may be a weaker cementitious mixture. This paper will summarize the findings of the author’s research over the past 10 years in these particular applications of fiber reinforced cements (FRC). For masonry, considering both mortar and mortar-unit bond characteristics, a 0.5% volume fraction of micro fibers in type …

The Latest Homebond House Building Manual : A Critique, Joseph Little

Articles

The Homebond House Building Manual had the distinction of being called the ‘bible’ for many building during the boom. It was a commonly‐used reference book, even for many builders and architects who never built housing estates and therefore had little need of a Homebond guarantee. One might design a construction detail of a dwelling differently, but one did it with an awareness of what the manual showed. It gave the insurance scheme great credibility and standing. This architect remembers reluctantly getting involved with an external wall insulation self‐build project in rural Ireland in 2006 (far beyond his normal travel distance) …

Forced Vibration Testing And Analysis Of Pre- And Post- Retrofit Buildings, Erica Dawn Jacobsen

Master's Theses

ABSTRACT

Forced Vibration Testing and Analysis of Pre- and Post- Retrofit Buildings

Erica Dawn Jacobsen

The primary goal of the thesis was to detect the retrofit through vibration testing of both buildings.  The secondary goal focused on correctly identifying the behavior of the building through FVT, comparing that behavior to computational model predictions, and determining the necessary level of detail to include in the computational modeling.  Forced vibration testing (FVT) of two stiff-wall/flexible-diaphragm buildings yielded natural frequencies and mode shapes for the two buildings.  The buildings were nearly identical with the exception that one had been retrofitted.  Both buildings were …

Thermal Bridging - Understanding Its Critical Role In Energy Efficiency, Joseph Little, Beñat Arregi

Articles

Plane element heat loss[1] and thermal bridging[2] together constitute all the conduction heat loss (measured in W/K, watts per kelvin) through the thermal envelope[3] of a building. Perversely insulating the plane elements more and more without carefully dealing with junctions can lead to a significant increase in thermal bridging heat loss. This is often more significant in poorly thought-out energy-focused retrofits than in existing or new buildings.

Top Tips For Domestic Refurbishment, Joseph Little

Articles

1) It stands to reason that insulating a wall should not affect its strength or longevity, nor should it result in a buildup of moisture (inter-stitial condensation) or mould. However the Industry is currently gripped with a desire to insulate to the highest standard (U-value) at the lowest financial cost, as quickly as possible, with little thought of these issues. An appropriate, robust solution must take the original wall, the occupant’s health, the room’s function and even the building’s location into account.

Breaking The Mould 5 : Comparative Simulation Of Internal Insulation Systems, Joseph Little

Articles

In the last edition of Construct Ireland ‘Breaking the Mould IV’ established the standard that should be used to evaluate thermal upgrades of single leaf walls, described steps to physically prepare the wall, explained some of the mechanisms that affect the likelihood of mould and gave criteria for judging the simulations outputs. The next step is to simulate a number of permutations of typical internal insulation systems using WUFI Pro under IS EN 15026.

Breaking The Mould 4 : Condensation Risk Analysis – The Standards And The Issues, Joseph Little

Articles

The ‘Breaking the Mould’ series of articles was written to explore the range of issues associated with upgrading single leaf walls with a focus on occupant and building health as much as energy, just as the Home Energy Saving Scheme was launched. A year on from the first article the need for greater understanding and clear guidance for the Industry is greater than ever. This is because the Government’s ‘Energy Demand Reduction Target’ (EDRT), under the 2006 EU ‘Energy Services Directive’, is bringing energy utilities (e.g. ESB, Bord Gáis) into the refurbishment market.

Breaking The Mould 3, Joseph Little

Articles

This article is the third in a series looking at thermal upgrades to single-leaf walls of existing houses. The theme for this article was intended to be an analysis of various drylining options for brick and rubble-built walls of older properties. That will follow. The following events forced a change in focus.

Seismic Performance Of Unreinforced Masonry Walls Retrofitted With Post-Tensioning Tendons, Daniel Louis Lazzarini

Master's Theses

Unreinforced masonry (URM) structures have historically been regarded as structurally unsound in response to seismic events. The tendency for URM walls to collapse out-of-plane in a brittle manner is continually cause for concern. Retrofit of these walls is necessary in order to prevent severe damage and injury to occupants.

This paper is concerned with the retrofit of unreinforced masonry (URM) walls in response to out-of-plane loading. A retrofit design was developed and verified through structural testing. The selected retrofit technique incorporates vertical coring of URM walls to allow for the insertion of a single post-tensioning (PT) tendon. Tendons are spaced …

Breaking The Mould 2 : An Analysis Of Single-Leaf Insulation Upgrades, Joseph Little

Articles

This article is the second in a series looking at thermal upgrades to single-leaf walls of existing houses. It compares a range of ways of upgrading masonry single-leaf walls, particularly the ubiquitous hollow block wall, and the impact of those decisions on moisture content, wind- and airtightness, cost and heating. Future articles will look at various drylining approaches for a range of walls including brick walls of various widths.

Breaking The Mould 1 : A Study Of Condensation In Single-Leaf Concrete Wall Upgrades, Joseph Little

Articles

This article is the first of a series looking at upgrade options and issues associated with single-leaf walls of existing houses. This article will focus on insulated drylined concrete block walls of the ubiquitous housing estate house. This will include the findings of software that dynamically models moisture movement through the wall over several years. The article following this will look at a range of options for replacing existing drylining or installing drylining where it never was before, be that for a solid block wall of a 1950s house or a solid brick wall of an 1850s house.

In Transit - Transition Movement Inspires Dramatic Carbon Cuts In House Refurb, Joseph Little

Articles

Drawing on the ‘Energy Descent Action Plan’ he developed at Kinsale, Rob Hopkins and his team launched Transition Town Totnes (in the UK) one and a half years ago. 64 recognised transition communities and 600 other groups (and counting) are now in communication with Rob’s team to launch their versions of this initiative in their communities worldwide.¹ The Transition Ireland Network is coordinated by Davie Philip of Cultivate and several transition initiatives are underway here.

Frame It - Thoughts On Education, Reducing Carbon And Vapour, Joseph Little, Robbie Cousins

Articles

Joseph Little believes timber frame can be the backbone of a new generation of low-carbon, energy-efficient housing, and be used as an intelligent response to Climate Change and fuel prices. But he tells Robbie Cousins that timber frame manufacturers, suppliers and architects need to gear-up and work more closely together if the true potential of this vision is to be realised.

Joseph Little’s chief bugbear is poor construction standards & details on site and the core of this issue is how the knowledge set of architects and builders and how standards are controlled. The seeds of this idea may have …

Baugruppe - Lessons From Freiburg On Cooperative Housing : Lessons From Freiburg On Cooperative Housing, Joseph Little

Articles

Creating Sustainable Communities in the UK and Ireland

The Genesis of Quartier Vauban

Construct Ireland - Lime-Hemp - A Potential Solution To A Concrete Problem, Joseph Little

Articles

This article is intended to act as an exploration and provocation. Why do we build the way we do, what effect does that have? Could we for instance, design and specify buildings that actually benefit the Environment rather than burden and pollute it as currently. Is it possible that the construction of a house could absorb CO₂ thereby transforming new housing estates or apartment buildings into giant absorbers of carbon dioxide? Imagine Ireland being able to count commercial constructions or new housing among its ‘carbon sinks’, in place of Siberian forests or the carbon credits that the Government will …

Construct Ireland - Partial Fill Cavity Walls, Joseph Little

Articles

An examination of whether it still deserves its best practice status in the Irish Construction Industry in light of higher U-Values, construction practices, recent research and cultural pressures.