Architectural Engineering Commons^™

Design And Implementation Of A Honeycomb Damping System For The 2026 Eeri Seismic Design Competition, Vera Nguyen, Lauryn Wojcik

Architectural Engineering

The authors of this report were a part of the 2026 Earthquake Engineering Research Institute (EERI) chapter at California Polytechnic State University, San Luis Obispo. In July 2026, they will travel to Portland, Oregon with 12 students to compete in the Undergraduate Seismic Design Competition hosted by EERI. The competition required teams to develop a comprehensive structural design proposal that included computer-based modeling and analysis, construction of three physical models, and the preparation of both a technical poster and oral presentation for a proposed high-rise building located in Portland, Oregon. Cal Poly’s “Illahee Tower” was designed with an emphasis on …

Hidden Systems, Samuel Choi

Masters Theses

Across buildings and cities, moisture is managed, concealed, and discharged through convoluted systems of containment. Still, water ultimately resists this framework. It reveals itself as leaks, puddles, condensation—moments typically understood as technical failure. Hidden Systems reframes these conditions as architectural knowledge, one that becomes evidence of water’s material capacity, limits of infrastructure, and a record of time.

NYC is constructed on, powered by, and profiting from water. Although it hosts a robust network, seepages disrupt control, allowing systems to be traced across scales. As pipes expand, contract, and freeze, the project unfolds seasonally, moving through water’s three states: solid, liquid, …

Deployable Shelter Systems For Emergency Response Using Scissor Mechanism, Farzad Saeidi

Hospitality Design Graduate Student Capstones

This thesis investigates the architectural potential of deployable scissor-based structures as rapid-response shelter systems for emergency, post-disaster, and transitional recovery contexts. While deployable systems are often valued for speed and compactness, this research frames deployability as a broader architectural capacity that integrates structural performance, transportability, constructability, habitability, and adaptability to uncertain environmental and social conditions.

Climate Responsive Design For Airport Terminals In Hot Arid Climates, Zahra Salmizadeh

Hospitality Design Graduate Student Capstones

This thesis argues that the roof of an airport terminal can be transformed from a neutral cover into an operational design tool that actively shapes passenger experience in hot arid environments. Drawing from observed challenges in contemporary airport concourses, including those identified through the D Gates concourse at Harry Reid International Airport in Las Vegas as an example, the study examines roof structure, envelope, and form as distinct but interrelated design fields. It investigates how these components influence wayfinding clarity, thermal and visual comfort, acoustic performance, and spatial identity in large scale airport interiors.

Analysis Of The Potential Of Urban Surfaces For Energy Use By Applying Solar Energy Or Green Roofs, Kristin Dietrich, Jose Ambrosini, Fabio Capra-Ribeiro, Juan Raul Massipe Hernandez, Alberto Tama Franco, Fernando Mayor-Vitoria

Faculty Publications

Renewable energy is rapidly increasing in importance in the energy mix in many countries worlwide. They are a key part of the energy transition to more sustainable energy systems. Green roofs are multi-layered systems covered with plants, grasses or turf that are placed on terraces and roofs of different types. Energy savings and reduced urban heat-island effects are among the most notable benefits of green roofs. Traditionally, green roofs and photovoltaic (PV) or solar-thermal installations have been competing systems, but several studies and actual installations have shown that synergistic effects predominate. For example, vegetation has a cooling effect on green …

Optimizing Energy Efficiency In Educational Buildings Through Facade Material Selection, Rania Rushdy Moussa, Malak Ayman, Khloud Khalid

Architectural Engineering

Facade material selection is crucial for improving building performance and reducing environmental effect, as evidenced by the growing demand for sustainable architectural solutions, especially in educational institutions. The use of typical, non-sustainable facade materials in Egyptian educational buildings is a major cause of the country's high energy consumption, poor indoor air quality, and rising carbon emissions. This research explores the possibility of using cuttingedge facade materials to promote sustainability in Egyptian university buildings in order to close this crucial gap. The study incorporates a mixed-methods approach and begins with a qualitative theoretical review that includes a thorough literature analysis. A …

A Social Media-Based Framework For Marketing Architectural Design Firms In Egypt During Global Economic Downturn, Ayman Ahmed Ezzat Othman, Yara Ahmed Maarek

Architectural Engineering

Purpose – The global economic downturn has greatly impacted the construction industry and architectural design firms (ADFs). Social media, however, provides a strategic avenue to enhance the visibility and resilience of ADFs. This paper aims to develop a framework integrating social media as an innovative marketing approach for mitigating the impacts of the global economic downturn on ADFs in Egypt.

Design/methodology/approach – A qualitative and quantitative research approach was designed to accomplish four objectives. The literature review examined the global economic downturn and marketing ADFs. Three case studies investigated the role of social media in marketing ADFs during economic uncertainties. …

Investigating The Relationship Between Noun Classes And Plant Folk Taxonomy In Chasu Language Of Kilimanjaro Region In Tanzania, Peter Rabson Mziray

Journal of Humanities and Social Sciences

The current study investigates the relationship between noun classes and plant folk taxonomy in Chasu (G 22). The study focuses on two objectives: the first objective is to describe the plant folk taxonomy in Chasu and the second objective is to determine the relationship between noun classes and plant folk taxonomy in Chasu. Data were collected from rural villages in Same and Mwanga districts by using free listing, field interviews (jungle-walk-and-identify), and written texts containing Chasu plant names. The findings reveal that Chasu folk taxonomy reflects different ethnobotanical categories; including a unique beginner which is mmea/mimea ‘plant(s)’, and three life …

Designing Childhood Spaces: Towards An Architecture That Responds To The Child’S Innate Needs And Enhances Interaction, Abdelrahman Mohamed Mousa

Journal of Engineering Research

: The creation of a building for children is no longer just a shelter, but rather a spatial unit for 2020, a diverse and generally direct difference in building the child's personality, which limits the strengthening of control over the child on the one hand, and the direction in which he lives. It is a loud cry, one that is diverse: children have realized us, and the reference to the cry is that we find ourselves participating in dealing properly with children and also in society years later. It is believed that attention to children during the preschool stage significantly …

The Role Of Artificial Intelligence In Changing The Traditional Design Form Of Children's Museums: Towards Integrating Artificial Intelligence Technologies In Architectural Design Education., Nevine Ismail Mahmoud, Amira Fawzy Helmy Almaz, Heba Jahin

Journal of Engineering Research

Children's museums are crucial for their educational and entertainment value, but they also need to adapt to technological advancements to maintain their appeal, especially for older children. The design of these museums should vary between permanent and mobile spaces to maximize their benefits in different areas. Interactive exhibits in children's museums can bridge the gap between traditional and modern education, appealing to a wider age range, and adapting to changing educational needs in different communities by offering a mix of permanent and mobile museums.

Artificial intelligence (AI) is revolutionizing the design process by enhancing efficiency and creativity. It helps architects …

Enhancing The Design Efficiency Of Building And Finishing Materials: "An Analytical Study On The Role Of Artificial Intelligence In Streamlining The Architectural Façade Design Process", Marwa Emad Fikry Elbishry

Journal of Engineering Research

The architecture and design sector is witnessing a profound transformation due to technological advancements, particularly in the field of Artificial Intelligence (AI) and its integration into architectural design processes. AI has empowered designers with intelligent analytical tools that support more precise and efficient decision-making.

Architectural façades represent a vital element that embodies the identity of a building while influencing its environmental, aesthetic, and functional performance. In this regard, optimizing the design efficiency of façades through the selection of appropriate building and finishing materials stands as a central objective in the pursuit of advanced and sustainable architectural solutions.

Given that material …

Terra Lunaris: Assessment Of A Lunar Habitat For Scientific Astronauts, Space Miners, Or Space Tourists, Dirk Schumann, Robert A. Goehlich

Publications

This conceptual paper explores ground- based habitable space modules for various applications. The Terra Lunaris concept serves as the baseline and is evaluated in comparison to existing and theoretical studies in this field. Terra Lunaris is a compact hybrid habitat that expands to offer nearly four times its transport volume by combining rigid modules with an inflatable shell. With most interior elements pre-installed and foldable, setup time and complexity are minimized. The design integrates technical zones, living quarters, and shared spaces, while also supporting psychological well-being under extreme conditions. The paper provides both qualitative and quantitative analyses of lunar habitation …

Building Ecologies: Maintaining Land, Working With Wood, Taylor Jais

Masters Theses

This thesis critiques contemporary architecture and building practices for their fundamentally unsustainable and place-less assemblies that rely on extracting finite resources that generate significant emissions while simultaneously neglecting to consider the needs and existence of humans and non-human species with in the built environment. Through experimental material research that diverts “wood” waste streams and integrates land and multispecies care, this work demonstrates how maintenance-based approaches to construction can transform built assemblies into ecological systems. By deconstructing wood to its cellular components and recombining these elements in novel ways, this research reveals possibilities for collaborative, materials-driven, place-based building practices. This thesis …

A Circular Economy Framework For Reducing Construction Waste During The Design Process In Egyptian Architectural Design Firms, Ayman Ahmed Ezzat Othman, Abeer Ahmed Kamel, Fatma Othman Alamoudy

Architectural Engineering

Purpose – Construction waste drivers, amplified by the linear economy model, contribute significantly to resource consumption and waste generation across various phases of the construction process. Recognizing the critical influence of the design process on these outcomes, this study aims to develop a framework integrating circular economy to reduce construction waste and promote sustainable practices during the design process within architectural design firms in Egypt.

Design/methodology/approach – A qualitative and quantitative research approach was used to accomplish four objectives. A comprehensive literature review explored the concepts of construction waste, the design process, the circular economy and Egypt’s Sustainable Development Strategy …

Performative Biomechanics : Evolving Buildings Into Inhabitable Organisms, Josh Lopez

Bachelor of Architecture Theses - 5th Year

There has always been a connection between biology and architecture. Michael Pawlyn, in Biomimicry in Architecture, coined “biomechanical designs” to describe structural techniques derived from creatures. This study investigates chitin-based creatures. Crustaceans, insects, and microscopic organisms all have exoskeletons in nature. With a focus on crabs, other crustaceans and bugs, this study examines and evaluates the formal characteristics of chitin-based organisms. The architectural creations of OXMAN, NOX, which was founded by Lars Spuybroek; and Lebbeus Woods are among those that are analyzed and studied due to their inspiration from living things. They follow functional effectiveness in nature, which is why …

The Impact Of Visual Stimuli And The Properties Of Green Walls On Human Well-Being In Built And Immersive Virtual Environments, Alireza Sedghikhanshir

LSU Doctoral Dissertations

The built environment significantly influences human well-being, particularly in the context of stress recovery and cognitive restoration. This dissertation investigates the impact of visual stimuli, particularly green walls, on human responses related to stress, restoration, and thermal comfort. The research is guided by three primary objectives: (1) examining the role of visual stimuli and their properties in promoting stress recovery and restoration, (2) evaluating the potential of Immersive Virtual Environments (IVEs) as tools for delivering and studying restorative environments, and (3) investigating the influence of green walls on indoor environmental conditions.

A series of experimental studies were carried out to …

Icms3 Explainer Infographic, Conor Shaw, James O'Donnell

Tools

International standardisation is important for consistency in climate and financial governance. EU and Irish policy is moving to require Life Cycle Costing (LCC) and Life Cycle Carbon Emissions (LCCE) reporting.

Using Orientation To Enhance The Effectiveness Of Smart Skins To Increase The Energy Efficiency Of Office Buildings In Egypt, Marwa Mohammed Aboahmed Jr, Adel Abdelhameed Radwan Sr, Hassan Alsayed Abumahmoud Sr

Journal of Engineering Research

- Recently, Egypt has been facing a major energy crisis. Office buildings in Egypt consume large amounts of energy. Since most office spaces are centrally air-conditioned and rely mainly on artificial lighting, and because the building skins is one of the most important components of the building that affects energy consumption, the Research aims to benefit from one of the principles of environmental design, which is a simple principle such as (orientation of the building) to increase the effectiveness of The role of the smart skin in achieving energy efficiency for office buildings in Egypt. The effect of the smart …

A First Model Foundation Design Of Wood Pillar In Banjarmasin Swampland, Nursyarif Agusniansyah, Gusti Novi Sarbini, Akbar Rahman, Muhammad Tharziansyah

ASEAN Journal on Science and Technology for Development

Banjarmasin's swampland presents distinct characteristics that make it suitable for constructing homes, but it also requires special attention, especially concerning the foundation. The soil in this area often has extremely low carrying capacity, which poses a significant challenge for construction. Mistakes in choosing construction materials, coupled with mismatched building loads and inadequate foundation functions, often result in foundation failures—a common cause of building collapses. As the complexity and functionality of buildings increase, the need for more thoughtful house design becomes more crucial. The commonly used wooden pile foundation, while popular, has limited load-bearing capacity, necessitating modifications to enhance its strength. …

A Digital Paradigm For Shaping Smart Sustainable New Cities In Egypt, Hayam M. Omayer, Eman H. Ayad

Mansoura Engineering Journal

Shaping the future of cities is a crucial responsibility that depends on today’s developers and designers. In light of the ongoing technological advancements across all fields, cities are obliged to harness this accelerated continuous progress to rescue from global challenges facing communities. Rapid urbanization, population growth, fragile infrastructure, and many other threatening environmental issues have prompted many governments across the world to expedite the digital transformation of cities to achieve sustainable urban progression. In Egypt, planning for smart cities is still taking its first step. Various significant economic, environmental, and social challenges are confronted. This research explores the pivotal role …

Tanzania Design Build 2024, Elli S. Berger, Samantha M. Maher, Victoria J. Maestas

Architectural Engineering

In 2007 David Lambert, a Cal Poly ARCE alumnus, was inspired to build a school in Tanzania after spending time in Kenya completing his senior project. With the support of multiple Cal Poly faculty members, he assembled a team to launch what would become his master’s program project. Since no existing organizations could support their efforts, the team founded their own initiative, the Mbeses Initiative for Sustainable Design (MISD). The Cal Poly team shared their design ideas with multiple volunteer groups in Tanzania and eventually connected with Fr. Setonga who helped the initiative gain traction. A few years later, the …

Rethinking Human-Autonomy Teamwork In The Context Of Design And Robotic Fabrication, Iremnur Tokac Celikyay, Caja Thimm, Sigrid Brell-Cokcan

Human-Machine Communication

The integration of autonomous agents in design is challenging due to its unstructured nature. The increasing focus on human-robot interaction (HRI) is driven by its potential to address this issue, enabling human-robot teams to effectively manage creative design tasks. This paper aims to identify interactive processes among the agencies of humans, robots, and materials. We explore how HRI can shift robotic fabrication from a linear deterministic process to an iterative co-creation one. Through reflective analysis of robotic fabrication studies, we illustrated how interaction interfaces can distribute agency among humans, robots, and materials while negotiating the design intent with material and …

Towards Human-Machine Collaboration In Autonomous Material Handling On Construction Sites, Jyrki Oraskari, Lukas Kirner, Marit Zöcklein, Sigrid Brell-Cokcan

Human-Machine Communication

In the contemporary construction industry, the shortage of skilled labor has prompted the exploration of automation as a remedy and machine autonomy as a potential solution to the environmental conditions at the site. This research explores the balance between human oversight and the independent decision-making capabilities of robots for material delivery on construction sites. Using a scenario-based approach, autonomy in construction robotics is evaluated across four human-machine interaction cases with spatial and temporal dimensions. The expected outcomes revolve around improved safety through better human-machine communication and establishing an interoperable data model to enhance robot autonomy. This aims to automate tasks …

The Thermoplastic Honeycomb As An Eco-Friendly Material For Shelters, Neveen Youssef Azmy, Wesam Aeh Mehanna, Aya Fouad Kahla

Journal of Engineering Research

Nature-inspired design offers distinct environmental characteristics and makes them valuable in the development of structural designs within the construction industry, owing to their inherent natural and aesthetic qualities. Hexagonal structures exhibit remarkable mechanical, structural, and environmental attributes. Consequently, this research focuses on investigating honeycomb configurations composed of thermoplastic materials that engage thermally with the surrounding environment, as well as exploring their applications in temporary structures. The research aims to contribute to a temporary design model for shelter to protect the environment well and improve energy consumption by using a thermoplastic honeycomb to sustainable environment. A specialized model was developed to …

3d Printing Technology: Challenges, And Potentials In Achieving Sustainable Buildings, Sahar Mohamed Abd El Rahman, Sobhy Ibrahim Esmail

Journal of Engineering Research

The utilization of 3D printing technology in building construction has emerged as a promising approach with the potential to revolutionize the industry and significantly impact sustainability. This paper examines the role of 3D printing in building construction and explores its implications for sustainability. Through the ability to fabricate complex designs with precision and efficiency, 3D printing offers advantages such as reduced material waste, lower energy consumption, and decreased carbon emissions. Additionally, the use of locally sourced, recyclable materials combined with the customization capabilities of 3D printing enhances resource efficiency and minimizes environmental impact. Furthermore, the construction process is streamlined, leading …

Agility Opportunities In Construction Project Management “Exploring Opportunities In Construction Projects In Integration With Waterfall Methodology.”, Nevine G. Gado Dr., Noha A, Elsayed Dr

Journal of Engineering Research

The objective of project management for construction projects is to deliver projects that meet customer requirements, business values, and goals in the most efficient manner. Project management is considered one of the vastly debated fields currently while the commonly adopted approach is still the waterfall model. However, in today's construction market, the number of different stakeholders,’ and the way projects awarded are changing. This has created a gap between management's belief of how today's construction projects should be conducted and how they are executed. Despite the growing importance of traditional construction project management as the preferred project delivery method, there …

Ace Mentor Program - Central Coast Chapter, Brayden Samuel Groshart

Construction Management

For my senior project, I established a chapter of the ACE (Architecture, Construction, and Engineering) Mentor Program in San Luis Obispo, California. This program provides high school students with hands-on experience and exposure to careers in the architecture, construction, and engineering industries. The program spanned eight weeks, balancing theoretical knowledge and practical application. The curriculum began with sessions on the fundamentals of architecture, engineering, and construction. In order to expose the students to real world practices, we organized tours of an architecture firm, an engineering firm, and an active construction site. These visits allowed students to engage with professionals, observe …

Architecture As A Carbon-Based Practice, Qixin Yu

Masters Theses

Carbon serves as both a silent protagonist and a looming antagonist in the narrative of architecture, shaping not only the physical structures we inhabit but also the ecological legacy we leave behind.

Centuries of human exploitation of the environment have led to climate and material crises. Shifting this dynamic requires action at micro (matter), meso (material), and macro (materiality) levels. Biogenic materials offer significant potential for carbon sequestration and present opportunities for the building industry to collaborate with nature rather than merely extract from it.

This thesis establishes a research and manufacturing practice that prioritizes material innovation, carbon sequestration, environmental …

Digitalisation For A Circular Economy (Dice), Jimmy Fahy, Conan O'Ceallaigh

Reports

The construction industry is the world’s largest consumer of resources and is responsible for approximately 40% of global carbon emissions. In EU countries, building infrastructure plays a more significant role in energy consumption (40%) and energy-related Green House Gas (GHG) emissions (36%) (European Union, 2024) and for Ireland, the total GHG emissions of the built environment are estimated at 23 MtCO2eq/yr based on the 2018 level, which accounts for approximately 37% of national emissions, comprising 23% from building operations and 14% from embodied carbon (EC) emissions (O’Hegarty and Kinnane, 2022). These current emissions levels are stark given Ireland’s current commitment …

Parametric Design As A Tool To Reduce Solar Penetration By Outdoor Shades In Hot Arid Climate, Rana O. Aboulfaraj, Iman O. Gawad, Mostafa Khalifa

Architecture and Planning Journal (APJ)

Conventional design methods and current tools infrequently link performance with the geometry of the design. These methods rarely enable backtracking through the design process and can't achieve full performance criteria. In this context, using both procedural geometry and information from numerical assessments and performance simulations should be discussed to support the search for effective solutions. Architects have gained control over the process of design by utilizing parametric methods to generate a sustainable design that interacts with sustainable, climatic, and environmental restrictions, particularly in hot arid zones where outdoor life is overlooked. This paper will discuss the performance-oriented design and a …