Architectural Engineering Commons^™

Caed Shop Entrance Wall Construction, Mason Neil Mitchell, Benjamin Joseph Rohrer

Architectural Engineering

This project involves the demolition and reconstruction of the CAED Support Shop Wall at Cal Poly, San Luis Obispo. The project was designed as a multidisciplinary project, combining architectural engineering and construction management students who collaborated on the rehabilitation of an existing structure. This project aimed to use “replication” as a means of historical preservation and restoration, specifically in the fabrication of custom CMU members.

Outdoor Exercise Area Renovation, Hagan T. Jackson, Chet S. Crummett, Jesse E. Muth

Architectural Engineering

The Outdoor Exercise Area Renovation project revitalizes a well-used outdoor exercise area located near the baseball fields at Cal Poly. The existing exercise equipment, originally donated by Maino Construction, was weathered, but the area remained well-utilized and presented potential for revitalization. This project transforms the site into a functional and resilient space by replacing the pull-up and dip bar equipment, constructing a 300 square foot pavilion, and adding a concrete slab and integrated concrete benches. The new design enhances usability, providing a multifunctional area for the Cal Poly community to exercise, socialize, relax, and enjoy scenic views.

The renovated area …

Physical Construction Of 1/2 Scale Concrete Wall, Alicia Danielle Lee, Cali Jeanne Carson

Architectural Engineering

This senior project was the physical construction and material testing of the half-scale reinforced concrete wall specimens. This included all stages of the building process, from formwork and reinforcement to concrete placement and laboratory testing.

Towards Human-Machine Collaboration In Autonomous Material Handling On Construction Sites, Jyrki Oraskari, Lukas Kirner, Marit Zöcklein, Sigrid Brell-Cokcan

Human-Machine Communication

In the contemporary construction industry, the shortage of skilled labor has prompted the exploration of automation as a remedy and machine autonomy as a potential solution to the environmental conditions at the site. This research explores the balance between human oversight and the independent decision-making capabilities of robots for material delivery on construction sites. Using a scenario-based approach, autonomy in construction robotics is evaluated across four human-machine interaction cases with spatial and temporal dimensions. The expected outcomes revolve around improved safety through better human-machine communication and establishing an interoperable data model to enhance robot autonomy. This aims to automate tasks …

Evaluating The Feasibility And Efficacy Of 3d Printing Versus Traditional Construction Techniques: A Study Of Cost, Time And Energy Of A New Lowrise Office Building On The Uaeu Campus, Hala Mohammed Basel

Thesis/ Dissertation Defenses

In line with the forward-looking vision of the United Arab Emirates University (UAEU), this research evaluates the feasibility and effectiveness of 3D printing technology compared to traditional construction methods, focusing on cost, time, and energy efficiency for a new low-rise office building on the UAEU campus. With the growing number of PhD students in the Architectural Engineering Department, expanding office space has become a priority. This study explores how 3D printing technology, known for its sustainability, reduced material waste, and accelerated construction, can address these challenges more efficiently than conventional methods.Guided by the UAE Vision 2030, which promotes innovation and …

Evaluating The Feasibility And Efficacy Of 3d Printing Versus Traditional Construction Techniques: A Study Of Cost, Time And Energy Of A New Lowrise Office Building On The Uaeu Campus, Hala Mohammed Basel

Theses

In line with the forward-looking vision of the United Arab Emirates University (UAEU), this research evaluates the feasibility and effectiveness of 3D printing technology compared to traditional construction methods, focusing on cost, time, and energy efficiency for a new low-rise office building on the UAEU campus. With the growing number of PhD students in the Architectural Engineering Department, expanding office space has become a priority. This study explores how 3D printing technology, known for its sustainability, reduced material waste, and accelerated construction, can address these challenges more efficiently than conventional methods.

Guided by the UAE Vision 2030, which focuses on …

Use Of Building Information Modeling (Bim) In The Management Of Construction Sector In Egypt, Asmaa Said Khalifa, Eman Attia, Hesham Awad

Journal of Engineering Research

Purpose – The application of Building Information Modelling (BIM) technology in Egypt is hindered by inadequacies or insufficient experience, as only a handful of companies and institutions are able to create three-dimensional models using this technology. Additionally, the majority of architectural education curricula do not fully incorporate BIM. The majority of Egyptian graduates in the fields of architecture, construction, and engineering lack the necessary knowledge or expertise to use BIM technology because universities in Egypt primarily focus on teaching CAD technology rather than BIM technology. This may be because BIM technology is still relatively new or because there aren't many …

Opportunities And Challenges Of Generative Ai In Construction Industry: Focusing On Adoption Of Text-Based Models, Prashnna Ghimire, Kyungki Kim, Manoj Acharya

Durham School of Architectural Engineering and Construction: Faculty Publications

In the last decade, despite rapid advancements in artificial intelligence (AI) transforming many industry practices, construction largely lags in adoption. Recently, the emergence and rapid adoption of advanced large language models (LLMs) like OpenAI’s GPT, Google’s PaLM, and Meta’s Llama have shown great potential and sparked considerable global interest. However, the current surge lacks a study investigating the opportunities and challenges of implementing Generative AI (GenAI) in the construction sector, creating a critical knowledge gap for researchers and practitioners. This underlines the necessity to explore the prospects and complexities of GenAI integration. Bridging this gap is fundamental to optimizing GenAI’s …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

Development Of The New Hasslein Caed Collaborative, Catie Dines

Construction Management

This paper outlines the development and execution of the new Hasslein CAED Collaborative student competition which engages students of all five majors in the College of Architecture and Environmental Design in a Request for Proposal style competition. CAED houses students studying Architecture, Architectural Engineering, City and Regional Planning, Construction Management, and Landscape Architecture. There is little opportunity for interdisciplinary collaboration within the CAED, despite our future career paths being heavily intertwined. This competition followed research by Greta Stout, class of 2022, on the benefits and support of interdisciplinary collaboration at Cal Poly SLO in CAED. The competition is named after …

Law School News: Joyce And Bill Cummings Of Cummings Foundation To Deliver Keynote Address At Rwu Commencement 4-20-2023, Jill Rodrigues

Life of the Law School (1993- )

No abstract provided.

Sage Garden Pavilion Shade Structure, Anthony Razouk Karroum, Manuel Bermudez, Matthew Kilbride, Sarah Holt, Marisa Martineau

Architectural Engineering

Form finding, testing, and construction of funicular double-layered shells in an interdisciplinary format with a focus on designing a shade structure for the San Luis Obispo Botanical Garden Children’s Pavilion. In the process, challenges such as connection design, materiality, storage, and more are explored and refined in relation to shell structures.

The Irish Construction Industry’S State Of Readiness For A Bim Mandate In 2020, Barry Mcauley, Alan V. Hore, Roger P. West

Conference papers

It was recently announced that a BIM mandate for the Irish public sector is not imminent, suggesting that the sector is not yet ready for what such a mandate implies. Following on from a forward-looking BIM Roadmap for Ireland in 2017 and the publication by the authors of a detailed BIM in Ireland study in 2017 and 2019, what is the actual state of readiness for a more general BIM mandate in Ireland? This paper will review recent publications, seminars and industry initiatives on this topic of interest supported by an online survey to assess the current state of readiness …

Interdisciplinary Studio Pavilion [Isp] 2019, Albert J. Gutierrez

Construction Management

Historically Cal Poly’s motto has been ‘Learn by Doing’ and the College of Architecture and Environmental Design (CAED) is one of the leading examples of this. Many students gain valuable hands-on and real-world experience through collaborative projects and assignments. Through this learn by doing philosophy and collaborative learning approach Cal Poly construction management, architecture and architectural engineering students worked together in 8 separate studio teams to design and construct a portable pavilion for the Wine History Project of San Luis Obispo County. Acting as a client they requested that we design a portable pavilion space that will be used to …

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Architectural Engineering Institute: 2019 Student Design Competition - Jack H. Miller Center For Musical Arts, Mark W. Wright, Logan D. Wright

Architectural Engineering

The 2019 Student Design Competition is an annual interdisciplinary competition for students in Architectural Engineering (AE) programs around the nation. The central focus of the project was exploring interdisciplinary workflow and collaboration between the disciplines of the built industry. The 2019 Cal Poly design team, Sotto Voce, consisted of 3 Architecture, 2 Architectural Engineering, and 2 Construction Management students. The team was given a set of architectural drawings of the Jack H. Miller Center for Musical Arts at Hope College in Holland, Michigan and tasked with finalizing the design. The primary design challenge, to create an innovative venue and community …

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

Innovating Concrete Shell Construction, Aron J. Tezveren-Johnson, Jiamin Chen, Kenneth Lee, Ireneidalys Mata, Garrett Parkinson

Architectural Engineering

Thin-shell concrete construction formwork in the modern era is complicated and expensive. With the use of a sophisticated soil formwork construction method, this process can be simple and cost-effective. This senior project explores a new construction method as well as the performance of a finished shell structure.

Modular House Restoration, Abby M. Lentz, Michael L. Blanchard

Architectural Engineering

The aim of this senior project is to help restore the vitality of Poly Canyon by continuing the renovation of the Modular House. The Modular house was originally built in 1969 as living quarters for caretakers of Poly Canyon. The two-story structure was built as a series of 8 foot (ft.) by 8 ft. wall, floor and ceiling frames in a 2x3 bay floor plan. The 8 ft squares were filled with 2 standard sized 4 ft. by 8 ft. plywood sheets. Since its original construction, triangular expansions have been added to the floor plan of the original layout. Also, …

Building Information Modeling (Bim) Impact On Construction Performance, David D. John

College of Graduate Studies: Theses & Dissertations

This study is designed to address the need for having a measure for Construction Performance on BIM-assisted construction projects. Through this study a new Construction Key Performance Indicator (CKPI) matrix is identified and created by the author. The CKPI could be used to assess BIM-assisted projects. Utilizing a sequential mixed methodology approach, academic and practitioner perspectives are assessed. A qualitative content analysis and quantitative descriptive analysis based on demographics are conducted to establish a better understanding of BIM and Construction Performance. The academic perspective is used to assess the relevance of BIMM and CKPI indicators, and the practitioner perspective is …

The Prevalence Of Six Sigma Trends In The Construction Industry In Pakistan, Muhammad M. Hassan

Masters Theses & Specialist Projects

Economic development in any country or area depends heavily on the performance of the construction industry. This is because the subsequent development of infrastructure increases economic activity, living standards, direct foreign investments, and business opportunities. The construction industry in Pakistan also plays a significant role in its economic activity, and the government’s focus towards increasing infrastructure development provides the construction industry with growth prospects. It is observed that quality management practices in the Pakistan construction industry are highly inadequate to enhance quality. The construction industry there is highly challenged with inadequate delays in projects and project quality. The need for …

Polaris, Dennise M. Manalo, Andy Do, Emilio Lozano, Mackenzie Stickney

Architectural Engineering

The project explores the relationship between the architecture and the engineering behind thin-shelled concrete structures. Initially, hanging chain models were used to observe pure compression; then, this model was improved upon using software like Rhinocerus, AutoCAD. From AutoCAD, the model was imported into SAP2000 for analysis.

Clothedral, Jacob T. Holmes, Andres Munoz, Sam Tenreiro Theis, Marta Blachowicz

Architectural Engineering

No abstract provided.

The Mustang Sculpture, Natalie Gibbons, Jordan Gates

Architectural Engineering

No abstract provided.

The Burning Building | Fire As Place, Winnie Tu

Architecture Senior Theses

The importance of fire in human social evolution is widely acknowledged but the extent of its impact is not fully explored. Generally, it is connected to energy, light, purification, illumination, creation, destruction and metamorphosis. Fire’s paradoxical nature has built up many societies throughout human history and has been the primary social driver within communities. Due to technological advances, its energy has been transformed into a distant element which is being used discretely in industrial buildings, hidden under basements, or replaced by other forms of energy. Now, heat, energy, and light is readily available anywhere at any time, eliminating the biological …