Impact Of Femalized Kinesthetic Learning Model On African American Middle School Girls’ Career Interest, Mercy F. Fash, Andrea Ofori-Boadu

Journal of Global Education and Research

Engaging African American middle school girls in out-of-school-time (OST) Architecture, Engineering, and Construction (AEC) programs can boost interest in male-dominated AEC careers. This study adopts Lent’s Social Cognitive Career Theory to evaluate the impact of an OST feminized AEC kinesthetic learning model (fAEC-KLM) on the career interests of this demographic. Through a qualitative research approach, fourteen (14) African American middle school girls from Guilford County, NC, completed pre- and post-interviews on how fAEC-KLM interactions influenced their AEC career interests. Inductive thematic analysis was carried out on transcribed interviews. Results show that effective components, such as lectures on AEC, bridge construction …

Large-Scale Experimental Study On The Impact Of Air Cleaning & Ventilation On Indoor Air Quality And Student Illness-Related Absenteeism, Daud Nosham

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This large-scale randomized experimental field study investigated the effect of portable air purifiers (PAPs) on classroom’s air quality and student’s illness related absenteeism. PAPs were installed in 317 classrooms from various school districts located in Eastern Nebraska. The classrooms were randomly assigned into four conditions: three treatment conditions (T1, T2 & T3) and one control condition (device without any filter). T1 was equipped with HEPA filters, T2 added Activated Carbon (AC) layer to HEPA, and T3 further integrated Germicidal Ultraviolet (GUV) alongside HEPA and AC filters. The measured variables were carbon dioxide (CO2), fine particles (PN2.5) and coarse particles (PNcoarse), …

Assessment Of Traffic Related Air Pollution Effects On Indoor Air Quality In Educational Buildings, Ahmed Gouda Mohamed, Mohamed Sherif Dr., Fahad Alqahtani Dr., Yousif Deeb Eng.

Civil Engineering

This study assesses the impact of traffic-related air pollution (TRAP) on indoor air quality (IAQ) within a Riyadh school. The main objectives are to pinpoint factors influencing IAQ and to evaluate the effectiveness of existing ventilation and filtration systems. Air quality Egg sensors monitored nitrogen dioxide (NO2), carbon monoxide (CO), and particulate matter (PM1.0, PM2.5, PM10) levels both indoors and outdoors over 30 days. Findings revealed average indoor PM2.5 and PM10 concentrations of 14.09 µg/m3 and 18.15 µg/m3, respectively, while outdoor concentrations averaged 20.63 µg/m3 and 27.88 µg/m3. A strong positive correlation was observed between indoor and outdoor PM levels, …

Mass Timber Construction: Products, Performance And Design, Anthony Harvey

Civil Engineering Professional Development Seminar

Due to their high strength, dimensional stability and positive environmental performance, mass timber building products are quickly becoming materials of choice for sustainably‐minded designers. This presentation will provide a detailed look at the variety of mass timber products available, including glue‐laminated timber (glulam), cross laminated timber (CLT), nail laminated timber (NLT), heavy timber decking, and other engineered and composite systems. Applications for the use of these products under modern building codes will be discussed, and examples of their use in U.S. projects reviewed. Mass timber’s ability to act as both structure and exposed finish will also be highlighted, as will …

Evaluating The Role Of Building Information Modeling (Bim) In Minimizing Delays And Reducing Costs In Construction Projects, Hussein Elsayed Mohamed Ismail, Mohammad Ahmad Mohammad Abdulhadi

Journal of Engineering Research

The implementation of Building Information Modeling (BIM) as a construction industry technology delivers extensive effects on project duration and financial management. This investigation examines BIM as a technology specifically designed to cut down construction project delays and decrease expenditures. The scholarly review of existing research material through a secondary approach allows this study to identify BIM's major value contributions.

The implementation of BIM technology enables project schedules to reach improved accuracy which results in a reduction of project delays by 15-25% because of its automation features and effective clash detection and real-time coordination benefits. The application of building information modeling …

The Third Annual Hasslein Caed Collaborative, Marianne Nicole Bishai

Construction Management

This paper details the planning, development, and impact of the third annual Hasslein CAED Collaborative Student Competition. The intention of the Hasslein Cup is to engage the students of the five College of Architecture and Environmental Design (CAED) majors in an industry-like scenario. The five majors, Architecture, Architectural Engineering, City and Regional Planning, Construction Management, and Landscape Architecture, make up the workforce of the construction industry, yet there has been very little opportunity for the students to work together and replicate a professional scenario. The competition began from research conducted by Greta Stout, class of 2022, which explored the benefits …

The Impact Of Visual Stimuli And The Properties Of Green Walls On Human Well-Being In Built And Immersive Virtual Environments, Alireza Sedghikhanshir

LSU Doctoral Dissertations

The built environment significantly influences human well-being, particularly in the context of stress recovery and cognitive restoration. This dissertation investigates the impact of visual stimuli, particularly green walls, on human responses related to stress, restoration, and thermal comfort. The research is guided by three primary objectives: (1) examining the role of visual stimuli and their properties in promoting stress recovery and restoration, (2) evaluating the potential of Immersive Virtual Environments (IVEs) as tools for delivering and studying restorative environments, and (3) investigating the influence of green walls on indoor environmental conditions.

A series of experimental studies were carried out to …

Green Building Information Modeling Framework For Sustainable Residential Development In Egypt, Mohamed Ahmed Nabawy Dr., Ahmed Gouda Mohamed, Ahmed Osama Daoud Dr.

Civil Engineering

first_page Download PDF settings Order Article ReprintsOpen AccessArticle

Green Building Information Modeling Framework for Sustainable Residential Development in Egypt

by Mohamed Nabawy *, Ahmed Gouda Mohamed , Israa Awad and Ahmed Osama Daoud * Construction Engineering and Management Programme, Civil Engineering Department, Faculty of Engineering, The British University in Egypt (BUE), El Sherouk City, Cairo 11837, Egypt * Authors to whom correspondence should be addressed. Buildings 2025, 15(7), 1035; https://doi.org/10.3390/buildings15071035 Submission received: 20 January 2025 / Revised: 23 February 2025 / Accepted: 27 February 2025 / Published: 24 March 2025 (This article belongs to the Special Issue Building …

Impact Of A Kinesthetic Learning Model On Architecture, Engineering, And Construction (Aec) Knowledge In African American Middle School Girls, Mercy F. Fash, Andrea A.N Ofori-Boadu

Journal of Research Initiatives

This study examines the impact of a femalized Architecture, Engineering, and Construction Kinesthetic Learning Model (fAEC-KLM) intervention on the AEC knowledge of African American middle school girls. Fourteen (14) middle school girls completed both pre- and post-surveys and tests that assessed their knowledge of AEC concepts, including roles and responsibilities, gender and racial diversity, and salary benefits. Paired-sample t-tests were utilized to evaluate statistically significant differences in knowledge before and after fAEC-KLM intervention. Results showed notable improvements in students' knowledge of AEC salary and benefits, as well as the underrepresentation of females, particularly African American females, and AEC roles and …

Individual Design Task Final Report Security Design, Ciarrah Bell

Honors Academy

"The Environmental Services Campus project is a comprehensive development designed to support the City of Springfield’s Environmental Services operations, with a focus on functionality, sustainability, and safety. The campus includes administrative office space, staff parking, a maintenance vehicle garage, and educational facilities aimed at community outreach. A component of the project is establishing site-wide security that not only protects personnel and assets but also integrates seamlessly with the architectural and environmental goals of the facility.

The primary focus of the Security IDT is the development and implementation of a comprehensive security strategy for the entire site. This includes designing and …

Temporal Analysis Of Construction Safety Incidents In Southeastern U.S. Using Machine Learning Techniques, Mayowa O. Oladele

College of Graduate Studies: Theses & Dissertations

Construction safety incidents remain a significant concern, particularly in the Southeastern U.S. due to the high-risk nature of the industry. Analyzing patterns in these incidents can help improve safety practices and reduce accidents. Machine learning (ML) techniques were employed in this study to identify temporal patterns in construction safety incidents, aiming to enhance proactive safety management. The machine learning methods used in this research included logistic regression, decision trees, random forest, support vector machine (SVM), and K nearest neighbors (KNN).

The objective of the study was to analyze temporal trends in safety incidents and identify the most effective machine learningtechnique …

Analyzing Reciprocating Piston Expander Performance In Small-Scale Caes Considering Expansion Mismatch And Residual Mass Losses, Mehrdad Poursadegh

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Energy storage (ES) has become an essential element of modern energy systems, particularly with the rapid growth of renewable energy sources. While these sources are central to global decarbonization efforts, their intermittent nature creates significant challenges for both grid operators and end users. To address these challenges, a wide range of storage technologies have been developed ranging from large utility-scale to small behind-the-meter units. Among these, Compressed Air Energy Storage (CAES) stands out for its long lifespan, low storage cost per unit of energy, and ability to provide both electricity and thermal energy. However, small- and micro-scale CAES systems, unlike …

Increasing Drift Capacity Of Non-Ductile Concrete Shear Walls Through Confinement With Fiber-Reinforced Polymer Application, Andrew Duong, Sophia Maglabe, Sheyna Rongong

Architectural Engineering: Graduate Reports

The seismic response and laboratory testing of pre-1980s reinforced concrete (RC) shear walls commonly exhibit undesirable concrete crushing and rebar buckling in the wall end-zones leading to a flexural compressive failure. The lack of ductility of these walls is attributed to low reinforcement ratios and absence of special boundary elements (SBE) as required by modern design code. Thus, the authors are proposing a fiber reinforced polymer (FRP) retrofit method to provide confinement to the end-zones of pre-1980s walls equivalent to that of an SBE. Current industry applications of FRP have largely been for shear strengthening of RC beams, columns, and …

Seismic Resilience Of Timber Homes, Melia R. Costa

College of Engineering Summer Undergraduate Research Program

The vast majority of residential buildings in California are wood-frame structures. A home is typically a very large investment for families, and damage to the home can be detrimental to a family’s economic success. Thus, reducing the economic impacts of an earthquake on residential timber housing is crucial. A full scale, two-story section of a residential timber house is in construction in the Parson’s Geotechnical and Earthquake Engineering Laboratory on the Cal Poly campus in San Luis Obispo, California. Once built it will be put through earthquake simulation tests on a shake table with various magnitudes of seismic activity. Next, …

Investigation Of Faults In Air-Conditioning Systems In Commercial Buildings: Occurrence, Diagnostic Validation, And Energy Impacts, Yuxuan Chen

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

In commercial buildings, fault detection and diagnosis (FDD) tools have been developed for detecting and diagnosing faults in building systems, which can provide useful information regarding fault locations and potential causes of faults, so that building operators and facility staff can be notified in time and quickly respond as problems arise. Nowadays, there are many commercial FDD tools available in the market, and these tools have been widely adopted in large- and medium-scale commercial buildings in the United States. Several studies have demonstrated the energy saving potential with the use of FDD in commercial HVAC systems, and one critical aspect …

Integrating Artificial Intelligence And Augmented Reality For Enhanced Task Performance In The Construction Industry, Aasish Chandrika Bhanu

All Dissertations

The Architecture, Engineering, and Construction (AEC) sector, characterized by its complex tasks, often faces challenges in adopting cutting-edge technologies, a trend that can significantly hinder productivity improvements compared to other industries. This dissertation explores the emerging integration of Artificial Intelligence (AI) and Augmented Reality (AR) within the AEC domain, investigating how effectively this can be implemented to potentially revolutionize industry practices. AI could be used in the AEC domain for advanced analytical and decision-making processes, while AR could be used for training, visualization, and remote collaboration.

In scenarios where construction site workers require expert guidance, these technologies could be helpful. …

Ace Mentor Program - Central Coast Chapter, Brayden Samuel Groshart

Construction Management

For my senior project, I established a chapter of the ACE (Architecture, Construction, and Engineering) Mentor Program in San Luis Obispo, California. This program provides high school students with hands-on experience and exposure to careers in the architecture, construction, and engineering industries. The program spanned eight weeks, balancing theoretical knowledge and practical application. The curriculum began with sessions on the fundamentals of architecture, engineering, and construction. In order to expose the students to real world practices, we organized tours of an architecture firm, an engineering firm, and an active construction site. These visits allowed students to engage with professionals, observe …

Construction Of Lightly Reinforced Concrete Shear Wall And Footings, Luke Jackson Method

Construction Management

This paper details the construction of two cast in place foundations as well as a lightly reinforced cast in place wall. The project, located inside the high bay, provides the Architectural Engineering (ARCE) department with an opportunity to test Fiber Reinforced Polymer wrap as a retrofitting option for walls dating back to pre-1980s. Due to site conditions, and project design, this project required extensive planning and communication within our team, faculty advisors, and shop technicians. This paper will discuss the phasing of construction and procurement of material that was required for the completion of this project. It also aims to …

Son Care Foundation – Lean To Shade Structure Design And Construction, Ryan Joseph Mccann

Construction Management

This paper discusses the design and construction of a lean-to-shade structure built for the Son Care Foundation in San Luis Obispo. The Son Care Foundation is a nonprofit organization that raises guide dogs for veterans and first responders with PTSD. This shade structure is 16 feet long and 6 feet wide, its height slopes from 9 feet in the front down to 8 feet in the back creating a roof pitch of 2:12. The sheet metal roof also has an overhang of approximately 1 foot. As requested by the client, the shade structure was designed to fit the aesthetic of …

Restoration Of The Cantilever Deck In Poly Canyon, Calvin S. Morgan, Calvin P. Vigeant, Roger G. Biddle

Construction Management

This interdisciplinary project aims to restore the Cantilever Deck in the Experimental Structures Laboratory back to an operational condition. As of Spring 2023, the deck has fallen into a state of disrepair and has been deemed structurally unsound by the university. The structural disrepair is concentrated around the wooden beams underneath the deck, but the handrails and overall color of the assembly have also fallen to levels deemed undesirable. The Restoration will remedy all these issues as well as guarantee that our repairs will last long into the future. This project is an interdisciplinary effort, the team consists of ARCE …

The Interpretative Structural Modeling For Stakeholder Involvement To Reduce Slum Settlements, Bich Hanes Bich, Ayomi Dita Rarasati

Smart City

The array of problems originating from slum settlements not only results in unwholesome environment, unlawful land utilization, and various internal challenges within the vicinity but also impacts the surrounding regions and the overall urban infrastructure network. In pursuit of Indonesia's 2045 Vision, which emphasizes on "equitable and integrated infrastructure development", the zero slums constitutes a pivotal component of the Ministry of Public Works and Public Housing's overarching vision. Nonetheless, a disparity has been identified in addressing slum settlements in West Kalimantan, hindering the achievement of this objective. This research aims to identify the stakeholders and the priority factors in determining …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Meta-Analysis Of Insulated Concrete Wall Panel Design Methods For Shear And Flexure Behavior, Maryam Al-Bayati

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Insulated Concrete wall panels have been designed and constructed since the early 1950s with various shear ties, dimensions, and methods; nonetheless, thermal bridging and rational design are still a concern. Many companies have recently developed plastic connectors that have gradually replaced solid concrete sections and steel connectors due to their superior thermal efficiency and strength. However, there is no generally accepted method for predicting the behavior of sandwich wall panels in structural engineering practice or codes, but many methods have been used since the early 1920. This study aims to evaluate the accuracy of current methods for predicting the flexural …

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Accelerating Bim Adoption In Ireland: A Ten-Year Review Of Cita Bim Gathering Proceedings, Alan Hore, Roger West, Barry Mcauley

Conference Papers

Digital construction interfaces have been studied extensively over the last few decades, with an ever-grow- ing catalogue of publications. The CitA BIM Gathering conferences have played a key role in bringing together the research and industry communities ina collaborative setting over the past decade in Ireland. In this paper the authors systematically review 10 years of papers published in the BIM Gathering pro- ceedings since the inaugural conference in 2013. A total of 175 papers involving over 200 authors have been reviewed and classified under the 2018 World Economic Forum (WEF) recommendations in respect to ac- celerating BIM adoption. The …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Analysis Of Factors Affecting Construction And Demolition Waste Reduction In Egypt, Ayman Ahmed Ezzat Othman, Ahmed Osama Daoud, Obas John Ebohon, Ali Bayyati

Architectural Engineering

Construction projects are associated with construction and demolition waste (CDW) generated at different stages. In Egypt’s case, the CDW problem has become a significant challenge, and the need to find sustainable solutions is overwhelming. Based on recent investigations in the literature, it was found that six main factors are affecting CDW reduction (CDWR) as follows: (1) waste-efficient materials procurement measures; (2) waste-efficient materials procurement models; (3) green materials procurement approach; (4) legislation; (5) culture & behaviour; and (6) awareness. In this study, a representative sample of Egyptian construction firms was screened to (1) investigate the applicability and effectiveness of CDWR …