Green Building Information Modeling Framework For Sustainable Residential Development In Egypt, Mohamed Ahmed Nabawy Dr., Ahmed Gouda Mohamed, Ahmed Osama Daoud Dr.

Civil Engineering

first_page Download PDF settings Order Article ReprintsOpen AccessArticle

Green Building Information Modeling Framework for Sustainable Residential Development in Egypt

by Mohamed Nabawy *, Ahmed Gouda Mohamed , Israa Awad and Ahmed Osama Daoud * Construction Engineering and Management Programme, Civil Engineering Department, Faculty of Engineering, The British University in Egypt (BUE), El Sherouk City, Cairo 11837, Egypt * Authors to whom correspondence should be addressed. Buildings 2025, 15(7), 1035; https://doi.org/10.3390/buildings15071035 Submission received: 20 January 2025 / Revised: 23 February 2025 / Accepted: 27 February 2025 / Published: 24 March 2025 (This article belongs to the Special Issue Building …

Nature-Based Education As A Learning Tool: Unleashing The Power Of Nature-Based Education In Egyptian Primary Schools. "The Effects Of Outdoor Learning And Open-Air Classrooms On Primary School Students In Egypt.", Nermeen Bekhiet

Theses and Dissertations

When learning modalities are tailored to each student's preferences and needs, academic success follows. This effect is contingent upon both individual and surrounding factors. Many schools in Egypt and the Middle East do not concentrate on how exposure to nature and nature-based learning can affect how the learner perceives his or her learning area. Most schools in Egypt have no exposure to nature to allow students to explore the world in their way; there is no room for diverse students to excel. Therefore, this exploratory research aims to reestablish a connection between private primary school students and the natural world …

Impact Of A Kinesthetic Learning Model On Architecture, Engineering, And Construction (Aec) Knowledge In African American Middle School Girls, Mercy F. Fash, Andrea A.N Ofori-Boadu

Journal of Research Initiatives

This study examines the impact of a femalized Architecture, Engineering, and Construction Kinesthetic Learning Model (fAEC-KLM) intervention on the AEC knowledge of African American middle school girls. Fourteen (14) middle school girls completed both pre- and post-surveys and tests that assessed their knowledge of AEC concepts, including roles and responsibilities, gender and racial diversity, and salary benefits. Paired-sample t-tests were utilized to evaluate statistically significant differences in knowledge before and after fAEC-KLM intervention. Results showed notable improvements in students' knowledge of AEC salary and benefits, as well as the underrepresentation of females, particularly African American females, and AEC roles and …

Creating Safe Spaces: Evaluating Residential And Day Facilities For Vulnerable Populations, Carrigan Watson, Alaina Hess, Caroline Burton, Madison Miller

Posters-at-the-Capitol

For our senior capstone, we designed facilities to offer therapy services and residential facilities to marginalized groups. These projects consisted of a school that serves Deaf children, a juvenile rehabilitation center for criminal offenders, and two additional rehabilitation centers; one for domestic violence survivors, and one for substance abusers. Each facility's design intentionally optimizes access to services and creates a feeling of safety and community. We researched how visual cues were tied to the psychological sense of safety and created a more accessible means of communication. We incorporated design aspects that reinforce familiarity and a home-like environment. We incorporated universally …

The Design Studio Dilemma The “Slicing Method”, Yasser Osman El Gammal Associate Professor Dr.

Journal of Engineering Research

The design studio presents a multifaceted challenge due to the absence of a direct teaching approach, relying heavily on the teacher's expertise, design acumen, and pace. Furthermore, much of the existing literature on design studio methods tends to be philosophical or opinion-based, lacking practical solutions for ongoing challenges in this domain. While it's easy for scholars to theorize, offering comprehensive procedures to address design studio issues proves considerably more difficult. There's no unanimous agreement on the topic; most design studio models are based on individual opinions as scholars and practitioners view the topic from different angles, developing their own perspectives. …

Evaluating Energy Efficiency And Thermal Performance In Egypt’S Social Housing: Climate-Responsive Design And Material Impact In Hot Desert Environments, Ahmed M. Hanafi, Mohamed A. Moawed, Osama E. Abdullatif

Journal of Engineering Research

As Egypt's urban areas expand rapidly, the demand for energy-efficient, affordable housing in extreme hot desert climates has become increasingly urgent. This study investigates the energy efficiency and thermal performance of Egypt’s Social Housing Project, with a focus on residential building in New Aswan City, where summer temperatures frequently exceed 45°C. Employing a validated energy model, this research simulates annual energy consumption for the building, which comprises 24 residential units, each approximately 86 m². The model integrates realistic occupancy schedules, region-specific weather data, and common household behavior patterns to closely reflect actual energy usage. Findings indicate a high alignment between …

Polarimetry Based Radar Estimation Of Extreme Rainfall: Case Studies, Bong Chul Seo, Witold F. Krajewski, James A. Smith

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The study evaluated radar-derived polarimetric rainfall estimates for extreme rain events that occurred in the Kansas City Metropolitan area in the United States. To derive quantitative precipitation estimates (QPE), we implemented two polarimetric algorithms based on specific attenuation (A) and specific differential phase (KDP), along with the reflectivity (Z) based one using data from two radars in the study area. The analysis to assess radar-rainfall estimates (R) utilizes ground observations from a dense network of about 170 rain gauges. Based on our analysis results, the two polarimetric estimates from R(A) and R(KDP) outperform the conventional estimation R(Z). R(A) appeared to …

Individual Design Task Final Report Security Design, Ciarrah Bell

Honors Academy

"The Environmental Services Campus project is a comprehensive development designed to support the City of Springfield’s Environmental Services operations, with a focus on functionality, sustainability, and safety. The campus includes administrative office space, staff parking, a maintenance vehicle garage, and educational facilities aimed at community outreach. A component of the project is establishing site-wide security that not only protects personnel and assets but also integrates seamlessly with the architectural and environmental goals of the facility.

The primary focus of the Security IDT is the development and implementation of a comprehensive security strategy for the entire site. This includes designing and …

A First Model Foundation Design Of Wood Pillar In Banjarmasin Swampland, Nursyarif Agusniansyah, Gusti Novi Sarbini, Akbar Rahman, Muhammad Tharziansyah

ASEAN Journal on Science and Technology for Development

Banjarmasin's swampland presents distinct characteristics that make it suitable for constructing homes, but it also requires special attention, especially concerning the foundation. The soil in this area often has extremely low carrying capacity, which poses a significant challenge for construction. Mistakes in choosing construction materials, coupled with mismatched building loads and inadequate foundation functions, often result in foundation failures—a common cause of building collapses. As the complexity and functionality of buildings increase, the need for more thoughtful house design becomes more crucial. The commonly used wooden pile foundation, while popular, has limited load-bearing capacity, necessitating modifications to enhance its strength. …

Green Project Finance For Infrastructure And Building Construction: Instruments And Benchmarks, Yunping Liang

Durham School of Architectural Engineering and Construction: Faculty Publications

It is counterintuitive that both the practice and research on green project finance for infrastructure and building construction are ascendant and still have limited precedents, considering that individually, the two parts (i.e., project finance and sustainability in the built environment) are both familiar to the communities. To narrow the gap and facilitate the financing of the built environment’s sustainable transformation, this study systematically reviews the common instruments for financing green infrastructure and building projects. Benchmarking questions distinguishing the profile of green project finance from common construction project finance are developed based on the literature review and then are used for …

Business Model Evaluation Of Renewable Energy Community In Multi Unit Residential Building In Canada Net Metering, Considering The Regulatory Framework, Ownership And Organizational Structure, Zahra Keshavarz Moraveji, Yunping Liang, Ursula Eicker

Durham School of Architectural Engineering and Construction: Faculty Publications

Renewable Energy Community (REC) is an emerging concept that empowers local customers to generate decentralized renewable energy. Integrating RECs into the building industry presents a promising opportunity to support the transition toward net-zero cities. However, the viability of RECs depends on regional regulatory frameworks, permitted governance structures, and very importantly, business models. Compared to pioneering European countries, Canada lacks the regulatory support needed to fully enable REC. This paper proposes and evaluates various business models for potential REC implementations under Canada's existing regulatory constraints. The analyzed models focus on "behind-the-meter" electricity distribution, a multi-stakeholder type of REC, where generation occurs …

Research On Data Organization Methods And Key Technologies For Product-Oriented Smart Steel Bar Processing Systems, Peijun Zhang, Lianxia Ma, Chunlei Zhang, Xinwu Zan

ASEAN Journal on Science and Technology for Development

This paper addresses the issues in the data organization logic of existing intelligent steel bar processing systems, which are centered on construction projects. It investigates product-oriented data organization methods and the key technologies of logical correspondence between steel bar product identification codes and physical entities. The paper analyzes the product-oriented data organization logic and presents the corresponding data organization architecture. It also examines the feature extraction of steel bar product information classification and coding, as well as the dynamic completeness of the coding rule system. The paper provides a construction method for steel bar product identification codes and designs partial …

A Digital Paradigm For Shaping Smart Sustainable New Cities In Egypt, Hayam M. Omayer, Eman H. Ayad

Mansoura Engineering Journal

Shaping the future of cities is a crucial responsibility that depends on today’s developers and designers. In light of the ongoing technological advancements across all fields, cities are obliged to harness this accelerated continuous progress to rescue from global challenges facing communities. Rapid urbanization, population growth, fragile infrastructure, and many other threatening environmental issues have prompted many governments across the world to expedite the digital transformation of cities to achieve sustainable urban progression. In Egypt, planning for smart cities is still taking its first step. Various significant economic, environmental, and social challenges are confronted. This research explores the pivotal role …

Temporal Analysis Of Construction Safety Incidents In Southeastern U.S. Using Machine Learning Techniques, Mayowa O. Oladele

College of Graduate Studies: Theses & Dissertations

Construction safety incidents remain a significant concern, particularly in the Southeastern U.S. due to the high-risk nature of the industry. Analyzing patterns in these incidents can help improve safety practices and reduce accidents. Machine learning (ML) techniques were employed in this study to identify temporal patterns in construction safety incidents, aiming to enhance proactive safety management. The machine learning methods used in this research included logistic regression, decision trees, random forest, support vector machine (SVM), and K nearest neighbors (KNN).

The objective of the study was to analyze temporal trends in safety incidents and identify the most effective machine learningtechnique …

Analyzing Reciprocating Piston Expander Performance In Small-Scale Caes Considering Expansion Mismatch And Residual Mass Losses, Mehrdad Poursadegh

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Energy storage (ES) has become an essential element of modern energy systems, particularly with the rapid growth of renewable energy sources. While these sources are central to global decarbonization efforts, their intermittent nature creates significant challenges for both grid operators and end users. To address these challenges, a wide range of storage technologies have been developed ranging from large utility-scale to small behind-the-meter units. Among these, Compressed Air Energy Storage (CAES) stands out for its long lifespan, low storage cost per unit of energy, and ability to provide both electricity and thermal energy. However, small- and micro-scale CAES systems, unlike …

Ansi Z97 Impact Testing Of Thin Glass, Justin P. Anthony

Dissertations, Master's Theses and Master's Reports

To determine whether thin glass constructions can pass Z97 impact test to qualify as safety glass an extensive protocol was performed. Constructions including monolithic, chemically strengthened, filmed, laminated, and triple pane insulated glass units comprised of thin glass ranging in thickness between 0.50 mm and 1.6mm were evaluated. Test results indicate annealed specimens, and laminated specimens performed similar to constructions with 3 mm and 6 mm glass. Specimens with 0.2 mm film consistently performed as safety glass for thicknesses between 0.7 mm and 1.6 mm and similar performance for specimens with 0.1 mm film with thickness of 1.1 mm and …

2024 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

The Effectiveness Of Risk Management In Project Success, Vishwa Goswami

Harrisburg University Dissertations and Theses

Abstract: This study investigated the effectiveness of risk management on project success within agile software development environments. It addressed the increasing complexity and challenges that agile teams faced in managing risks, which, if unmitigated, could significantly hinder project outcomes relate to time, cost, quality, and stakeholder satisfaction. By examining the intersection of risk management practices with agile methodologies, the research identified critical gaps and proposed tailored solutions to enhance overall project success. The study emphasized the importance of incorporating risk management into project planning and execution, thereby increasing the likelihood of successful project outcomes. It analyzed the effects of organizational …

Increasing Drift Capacity Of Non-Ductile Concrete Shear Walls Through Confinement With Fiber-Reinforced Polymer Application, Andrew Duong, Sophia Maglabe, Sheyna Rongong

Architectural Engineering: Graduate Reports

The seismic response and laboratory testing of pre-1980s reinforced concrete (RC) shear walls commonly exhibit undesirable concrete crushing and rebar buckling in the wall end-zones leading to a flexural compressive failure. The lack of ductility of these walls is attributed to low reinforcement ratios and absence of special boundary elements (SBE) as required by modern design code. Thus, the authors are proposing a fiber reinforced polymer (FRP) retrofit method to provide confinement to the end-zones of pre-1980s walls equivalent to that of an SBE. Current industry applications of FRP have largely been for shear strengthening of RC beams, columns, and …

Harmonizing Vaccine And Infrastructure Development To Tame Cholera Outbreaks Across Africa, Amira Mohamed Taha, Hussam Mahmoud, Emad M. Hassan, Mohamed M. Ghonaim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Vaccines and clean water shortages continue to give rise to cholera outbreaks in Africa. Coordinated efforts to increase vaccine distribution and improve physical infrastructure are needed while considering future outbreaks and water demands due to conflicts and climate events.

Restoration Of The Cantilever Deck Structure, Calvin P. Vigeant, Roger G. Biddle, Calvin S. Morgan

Architectural Engineering

The Restoration of the Cantilever Deck Structure is an inter-disciplinary project seeking to provide public safety, the continuity of a historic structure, and contribute to the life of the Poly Canyon Experimental Structures Laboratory. This project brought together architectural engineering students Roger Biddle and Calvin Vigeant and construction management student Calvin Morgan for a year long journey of Learn by Doing. The structure is visually stunning and gives the impression of a ship cresting a wave, featuring two prominent steel masts and large tapered wood beams. The deck is perched on a steep hillside site over a seasonal creek that …

Tanzania Design Build 2024, Elli S. Berger, Samantha M. Maher, Victoria J. Maestas

Architectural Engineering

In 2007 David Lambert, a Cal Poly ARCE alumnus, was inspired to build a school in Tanzania after spending time in Kenya completing his senior project. With the support of multiple Cal Poly faculty members, he assembled a team to launch what would become his master’s program project. Since no existing organizations could support their efforts, the team founded their own initiative, the Mbeses Initiative for Sustainable Design (MISD). The Cal Poly team shared their design ideas with multiple volunteer groups in Tanzania and eventually connected with Fr. Setonga who helped the initiative gain traction. A few years later, the …

Investigating The Effect Of Active Living Wall On Indoor Air Quality And Energy Consumption: Case Study In Uaeu Closed Offices, Atina Mohsen Ghunaim

Theses

Extreme hot climates can significantly affect Indoor Air Quality (IAQ) and ventilation, resulting in higher energy demands. Numerous studies have demonstrated that outdoor greening, such as trees and landscaped areas, can reduce a building’s energy consumption. However, less research has been conducted on the impact of indoor vegetation on energy use and air quality. Indoor vegetation decreases Carbon Dioxide (CO₂) concentration by absorbing CO₂ and releasing oxygen (O₂), while the evapotranspiration process further enhances (IAQ) and reduces energy expenditure. The United Arab Emirates has dry arid climate and summers with high humidity levels, causing individuals to stay longer indoors, which …

Barriers To The Adoption Of Cross Laminated Timber For Mid-Rise Residential Buildings In Uae, Sabika Nasrim Pilathottathil

Theses

Buildings consume about 40% of the total annual energy produced globally, with significant energy usage across different life cycle stages, including construction and operational phases. The energy associated with the construction of buildings is substantial due to the energy required for the manufacture of materials and products. This underscores the need for stakeholders in the building industry to find construction materials and systems with low embodied energy. In the pursuit of low-energy materials, massive timber products, such as cross-laminated timber (CLT), are gaining popularity in mid-rise buildings around the world. The development of CLT, which boasts excellent load-carrying capabilities, has …

Energetics Of Mode-1 Internal Waves Interacting With Topographic Ridges Of Varying Height And Slope, Matthew R. Klema, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Energetics of mode-1 internal waves interacting with topographic ridges are investigated using high-resolution two-dimensional simulations at spatial scales of m that span between classical laboratory-scale (m) and field-scale simulations (m). This paper focuses on the energetics of wave-Topography interaction, with emphasis on systematically examining the partitioning of the incident wave energy as a function of wave forcing and topographic parameters. Partitioning of energy into the transmitted, reflected and dissipated components is quantified as a function of wave Froude number (velocity amplitude of forcing and internal wave celerity), slope criticality, where topographic slope and wave characteristic slope, and the ratio of …

Rethinking Human-Autonomy Teamwork In The Context Of Design And Robotic Fabrication, Iremnur Tokac Celikyay, Caja Thimm, Sigrid Brell-Cokcan

Human-Machine Communication

The integration of autonomous agents in design is challenging due to its unstructured nature. The increasing focus on human-robot interaction (HRI) is driven by its potential to address this issue, enabling human-robot teams to effectively manage creative design tasks. This paper aims to identify interactive processes among the agencies of humans, robots, and materials. We explore how HRI can shift robotic fabrication from a linear deterministic process to an iterative co-creation one. Through reflective analysis of robotic fabrication studies, we illustrated how interaction interfaces can distribute agency among humans, robots, and materials while negotiating the design intent with material and …

Towards Human-Machine Collaboration In Autonomous Material Handling On Construction Sites, Jyrki Oraskari, Lukas Kirner, Marit Zöcklein, Sigrid Brell-Cokcan

Human-Machine Communication

In the contemporary construction industry, the shortage of skilled labor has prompted the exploration of automation as a remedy and machine autonomy as a potential solution to the environmental conditions at the site. This research explores the balance between human oversight and the independent decision-making capabilities of robots for material delivery on construction sites. Using a scenario-based approach, autonomy in construction robotics is evaluated across four human-machine interaction cases with spatial and temporal dimensions. The expected outcomes revolve around improved safety through better human-machine communication and establishing an interoperable data model to enhance robot autonomy. This aims to automate tasks …

Automating Modular Construction Manufacturing For Affordable Housing, Enaam Mohammed Ouda

Thesis/ Dissertation Defenses

In recent years, there has been an increase in the frequency and intensity of natural disasters worldwide, resulting in loss of life, displacement, and extensive property damage. According to the UNHCR's report, 89.3 million individuals were displaced in 2021, highlighting that the speed and volume of displacement exceeds the availability of solutions for those affected. To address the urgent need for affordable housing solutions, modular construction is preferred over traditional construction methods as it tackles limitations such as long project durations, high costs, and safety and environmental concerns. Integrating advanced technologies in modular construction can further enhance its benefits and …

Evaluating The Feasibility And Efficacy Of 3d Printing Versus Traditional Construction Techniques: A Study Of Cost, Time And Energy Of A New Lowrise Office Building On The Uaeu Campus, Hala Mohammed Basel

Thesis/ Dissertation Defenses

In line with the forward-looking vision of the United Arab Emirates University (UAEU), this research evaluates the feasibility and effectiveness of 3D printing technology compared to traditional construction methods, focusing on cost, time, and energy efficiency for a new low-rise office building on the UAEU campus. With the growing number of PhD students in the Architectural Engineering Department, expanding office space has become a priority. This study explores how 3D printing technology, known for its sustainability, reduced material waste, and accelerated construction, can address these challenges more efficiently than conventional methods.Guided by the UAE Vision 2030, which promotes innovation and …

Association Between In Situ Ventilation And Human-Generated Aerosol Exposure In Meatpacking Plants During The Covid-19 Pandemic, Joshua L. Santarpia, Josephine Lau, Debayan Shom, Shanna A. Ratnesar-Shumate, Eric C. Carnes, Gearge W. Santarpia, Vicki L. Herrera, Danielle N. Rivera, Daniel N. Ackerman, Ashley R. Ravnholdt, John J. Lowe, Athena K. Ramos

Durham School of Architectural Engineering and Construction: Faculty Publications

During the COVID-19 pandemic, meatpacking workers were disproportionately affected by disease. Large outbreaks at meatpacking facilities resulted in loss of life and threatened the well-being of workers across the globe. Much work was done throughout the pandemic to understand and prevent these outbreaks. This study combined ventilation system evaluation and measurement of human-generated respiratory aerosol to investigate and identify areas of highest risk for disease transmission. These findings confirm that improved ventilation reduces exposure to human-generated aerosols in meatpacking facilities, including those that may contain infectious agents, such as SARS-CoV-2. This study suggests areas of greatest risk are likely areas …