Architectural Engineering Commons^™

Concrete Slender Wall Design – Back To The Future, John W. Lawson, James Lai

Architectural Engineering

Slender concrete walls incorporated into tilt-up construction
over the past 60 years have performed remarkably well under
out-of-plane wind and seismic loads. While issues associated
with seismic wall anchorage gave this form of construction a
black-eye in the early days, the concrete walls themselves
have always performed very well even as far back as their
first use in the early 1900s. Yet the height-to-thickness
limitations in 1985 and earlier model building codes were
proved irrational and were removed. We as engineers expect
building codes to evolve and advance the state of the art with
each successive edition. The latest edition …

Guide To Stones Used For Houses Of Worship In Northeastern Ohio, Joseph T. Hannibal

Cleveland Memory

The purpose of this guide is to serve as an introduction and field guide to the stone used for Northeastern Ohio’s sacred landmarks. compiling this information are noted. Both exterior and interior stones are described. Locations are given so that visitors can find various interior features. Finally, interesting facts having to do with the stones are given in a remarks section and references to sources used. Original publication date 1999.

Ab-10-C037: Effects Of Noise From Building Mechanical Systems On Elementary School Student Achievement, Lauren M. Ronsse, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This project seeks to determine what relationship, if any, exists betweenbackground noise levels in elementary classrooms due to the building mechanicalsystems and student performance on achievement tests. Previous research inclassroom acoustics has clearly identified that lower background noise levelsresult in higher speech intelligibility which is crucial for the learning process;however, there is a lack of data correlating lower noise levels to improved studentachievement scores. For this study, background noise level measurements were madein 14 elementary schools in a public school system in Council Bluffs, Iowa, USA.The measurements were made in unoccupied classrooms with the central buildingmechanical systems activated. Second and …

Optimum Absorption And Aperture Parameters For Realistic Coupled Volume Spaces Determined From Computational Analysis And Subjective Testing Results, David T. Bradley, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This project utilizes computational modeling to study the effects of varying two architectural parameters, absorption ratio and aperture size, in a realistic coupled volume concert hall. Coupled volumes have been shown to exhibit non-exponential sound energy decay profiles, referred to as double slope effect. A number of objective metrics (T30/T15, LDT/T10, decay ratio, and ΔL) have been used to quantify the double slope effect of the profiles generated in the virtual hall. T30/T15 and LDT/T10 showed similar trends across all hall configurations, indicating decreasing double slope effect with increasing coupled volume absorption ratio for each aperture size, and producing highest …

Ab-10-018: The Effects Of Noise From Building Mechanical Systems With Tonal Components On Human Performance And Perception (1322-Rp), Erica E. Ryherd, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This study investigated the effects of noise from building mechanical systems with tonal components on human task performance and perception. Six different noise conditions based on in-situ measurements were reproduced in an office-like setting; all were set to approximately the same sound level (47 dBA) but could have one particular tonal frequency (120 Hz, 235 Hz, or 595 Hz) at one of two tonal prominence ratios (5 or 9). Thirty participants were asked to complete typing, grammatical reasoning, and math tasks plus subjective questionnaires, while being exposed for approximately 1 hour to each noise condition. Results show that the noise …

Computational Modeling Of Effects Of Alloying Elements On Elastic Coefficients, Z. K. Liu, H. Zhang, S. Ganeshan, Y. Wang, S. N. Mathaudhu

Durham School of Architectural Engineering and Construction: Faculty Publications

Models for composition and temperature dependencies of single-crystal elastic stiffness coefficients are developed and applied to the Al₁₂Mg₁₇ and hexagonal closed-packed solution phases in the Mg–Al system based on data from first-principles calculations. In combination with models for multi-phases, the bulk, shear, and Young’s moduli of Mg–Al alloys are predicted and compared with available experimental data in the literature. It is noted that both phase transition and grain boundary sliding may play important roles in the elastic coefficients as a function of temperature.

Ab-10-017: Combined Effects Of Noise And Temperature On Human Comfort And Performance (1128-Rp), Dale Tiller, Lily M. Wang, Amy Musser, Matthew Radik

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper summarizes results from an experiment designed to investigate the combined effects of noise and temperature on human thermal comfort and task performance. Thirty subjects (16 females, 14 males) were exposed to all combinations of five thermal conditions (PMV +1 [79.6°F:26.4°C], PMV +0.5 [75.8°F:24.3°C], PMV 0 [72.1°F:22.3°C], PMV -0.5 [68.3°F:20.2°C], and PMV -1 [64.6°F:18.1°C]), three RC noise levels (RC-30, RC-40, and RC-50), and two sound qualities (neutral and rumbly): all sounds mimicked noise from building ventilation systems. After a one-hour adaptation period at each condition, subjects rated their thermal comfort using the ASHRAE Thermal Comfort Scale and the Tenant …

Ab-10-019: Human Performance And Perception-Based Evaluations Of Indoor Noise Criteria For Rating Mechanical System Noise With Time-Varying Fluctuations (1322-Rp), Lily M. Wang, Cathleen C. Novak

Durham School of Architectural Engineering and Construction: Faculty Publications

The goal of this study was to investigate the effects of noise from building mechanical systems with time-varying fluctuations on human task performance and perception, and to determine how well current indoor noise rating methods account for this performance and perception. Six different noise conditions with varying degrees of time-varying fluctuations, many focused in the low frequency rumble region, were reproduced in an office-like setting. Thirty participants were asked to complete typing, grammatical reasoning, and math tasks plus subjective questionnaires, while being exposed for approximately one hour to each noise condition. Results show that the noise conditions with higher sound …

Feasibility Study Of Solar Driven Underground Cooling System, Michel E. Shafik

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

In the United States the peak electrical use occurs during the summer. In addition, the building sector consumes a major portion of the annual electrical energy consumption. One of the main energy consuming components in the building sector is the Heating, Ventilation, and Air-Conditioning (HVAC) systems. This research studies the feasibility of implementing a solar driven underground cooling system that could contribute to reducing building cooling loads. The developed system consists of an Earth-to-Air Heat Exchanger (EAHE) coupled with a solar chimney that provides a natural cool draft to the test facility building at the Solar Energy Research Test Facility …

Noise Propagation Through Open Windows Of Finite Depth Into An Enclosure, Caleb Sieck, Siu-Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

Predicting the insertion loss of an opening backed with an enclosed space is important for building noise control. Recent research in sound transmission through apertures of finite depth in infinite rigid baffles has included the effects of propagating and evanescent modes within the aperture in order to extend models to higher frequencies. The present study extends the model to the case of the aperture backed by a cavity as opposed to sound radiating into half-space. The role of coupling between the aperture modes, radiation modes, and cavity modes in the transmission was investigated. The results were compared to those of …

Modeling Resilient Modulus Of Unbound Granular Materials Under Repeated Loading, Cheng Chen, Louis Ge, Jia Sheng Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Resilient modulus of unbound granular materials is a key design parameter for mechanistic empirical pavement design. But the complexity of the affected factors has made it challenging and difficult for practical designers and researchers to find an appropriate model to describe the entire stress-strain response where the plastic deformation is accumulated during the repeated loading condition. a cyclic plasticity model based on fuzzy sets plasticity theory is presented in this paper to model the resilient modulus and permanent strain behavior of unbound granular materials under repeated loading. the concept of the fuzzy set plasticity is first introduced, followed by its …

Performance Based Analysis Of Steel Buildings, Matthew Joseph Williams

Master's Theses

This project investigated the performance of two separate building types, designed using ASCE 7-05, using the analysis procedures from ASCE 41-06. The results from the ASCE 41-06 analyses were compared to the expected performance level of Life Safety to determine the adequacy of the ASCE 7-05 design. ASCE 7-05 is intended to result in designs that perform to a Life Safety performance level regardless of the building type. A design using the AISC specifications for a steel Special Moment Frame and the lateral loads from ASCE 7-05 resulted in a building that slightly exceeded an Immediate Occupancy performance level for …

Settlement Of Reinforced Subgrades Under Dynamic Loading, V. K. Puri, S. Kumar, B. M. Das, Shamsher Prakash, B. Yeo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Model tests were conducted in the laboratory to study the settlement behavior of small size footing resting on geogrid reinforced sand layer and subjected to dynamic loads. Tests were conducted by first subjecting the footing to an initial sustained static load and then superimposing additional predetermined dynamic loads. the frequency of dynamic load was kept at 1 Hz which was well below the resonant frequency of the system. based on the observed test results, the nature of variation of the permanent settlement of the foundation with intensity of static loading and the amplitude of cyclic load are presented in this …

Ultrasonic Pulse Velocity Tests On Compacted Soil, David M. Weidinger, Louis Ge, Richard Wesley Stephenson

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In This Paper, Results of a Series of Ultrasonic Pulse Velocity Tests on Compacted Soil Were Presented and Discussed. Ultrasonic Pulse Velocity Tests Provide Compression and Shear Wave Velocity Information that Can Be Used in Calculating Dynamic Elastic Moduli Such as Young's Modulus and Shear Modulus. from the Test Results, Calculated Poisson's Ratio Shows a Linear Relation with the Water Content in Compacted Soil, Which Leads to a Linear Trend in Both P and S Wave Velocity Against Water Content. Furthermore, Presenting Plots in Bulk Density Versus Wave Velocity Gives a Clearer Trend Than Dry Density Versus Wave Velocity. © …

Material Sustainability, Jessica Meadows, Natasha Morris

Architectural Engineering

This paper addresses the sustainability of the materials used to construct buildings today. Timber, concrete and steel are analyzed for carbon output, cost, and recyclable-ability.

Design And Performance Of Load Bearing Shear Walls Made From Composite Rice Straw Blocks, Kevin Robert Camann

Master's Theses

Although rice straw and other grains have been used in building since pre-history, in the past two decades, there has been a move to utilize this rapidly renewable, locally available, agricultural byproduct as part of the sustainable construction movement. Up to this point, this has been done by simply stacking up the full straw bales. Stak Block, invented by Oryzatech, Inc., is a modular, interlocking block made of a composite of rice straw and binding agent that serves as an evolution in straw construction. This study investigates the feasibility of using these Stak Blocks as a structural system. The report …

Structural Damage Localization With Tolerance To Large Time Synchronization Errors In Wsns, Guirong Yan, Shirley J. Dyke, Wei Song, Gregory Hackmann, Chenyang Lu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

With Recent Technological Advances in Smart Sensor Platforms, Structural Condition Monitoring Implementations based on Wireless Sensor Networks (WSNs) Have Received Considerable Attention. Modal Identification is an Integral Step in Many Structural Condition Monitoring Systems. However, Accurate Time Synchronization is Not Always Possible, Leading to Incorrect Identification of the Mode Shapes. Although Strict Time Synchronization of the Wireless Sensors Has Been Viewed as Crucial for the Identification of Mode Shapes, a New Perspective is Taken Herein. the Distortion in the Identified Mode Shapes is Characterized and Accommodated. Then the Resulting Mode Shapes Are Used with a Flexibility-Based Damage Detection Approach to …

Do Companies Value Maintaining Iso 9000 Certification? 2009 Case Study Of 41 Us Companies First Certified In 2000, Sarah Joy Namara

Masters Theses & Specialist Projects

The costs of obtaining and maintaining ISO certification are high. Moreover, studies have shown mixed results on the benefits of the certification. Consequently, the objective of this research was to verify whether or not companies do value maintaining the ISO 9000 certification.

The empirical study was conducted on 41 U.S. companies that were first certified in 2000. The companies formed an existing database as they were used by Dr. Arbuckle in 2004 in his doctoral dissertation. Of the 41 companies, 12 were found to be out of business, leaving a final sample size of 29. Data were gathered from this …

Use Of In-Planta Solid Phase Sampling Devices To Delineate Voc Plumes, Joel Gerard Burken, Kendra Waltermire, Emily Sheehan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Plants Directly Interact with Surrounding Water, Air, and Soil, Collecting and Storing Chemicals and Elements from the Surrounding Environment. Two New and Innovative Sampling Methods in Which This Valuable Data Can Be Accessed to Replace as Well as Supplement Contaminated-Site Investigations Have Been Developed. When Determining the Extent of the Plume on a Contaminated Site, Groundwater Sampling May Be Limited Due to Time, Site Access, and Expense. by using New Techniques that Place Sampling Devices Inside the Trees on Site, We Can Sample Trees Naturally Occurring on a Contaminated Site or Those Planted in Phytoremediation or Redevelopment Efforts, Evaluate the …

Simulations Of Aquaculture Dissolved Waste Transport And Mixing In Near-Coastal Waters, S. K. Venayagamoorthy, O. B. Fringer, J. R. Koseff, R. L. Naylor

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The present study focuses on understanding the transport and fate of dissolved waste from aquaculture pens in near-coastal environments using the hydrodynamic code SUNTANS, which employs unstructured grids to compute flows at very high resolution. We perform simulations of the dissolved waste field and study the effects of different flow conditions (tides and currents) on the evolution of the waste plume. The fish pen causes partial blockage of the flow, leading to the deceleration of the approaching flow and the formation of a downstream wake. Results of the concentration field for an oscillatory flow condition superimposed on a mean current …

The Structure Of A Story, Pamalee Brady, Edmond P. Saliklis

Architectural Engineering

The stories of engineering heroes can serve as an exciting means of engaging young students in engineering concepts that are linked to their math and science curriculum. This research explores the development of a storytelling framework including the story of an engineer, a hands-on activity for exploring a related engineering idea, reinforcement of standard math and science curriculum and assessment of the effectiveness of the storytelling medium to teach and inspire young students. Storytelling principles are used to develop these narratives into compelling and engaging stories through the perspective of an individual character. Archival and other scholarly materials on fascinating …

Analysis Of Stabilized Adobe In Rural East Africa, Grace Ying Yu Chen

Master's Theses

ABSTRACT

ANALYSIS OF STABILIZED ADOBE IN RURAL EAST AFRICA

Grace Ying Yu Chen

This project seeks to assist people in rural East Africa by proposing sustainable building methods which implement affordable and durable adobe bricks for construction. Adobe, one of the oldest sustainable building materials in the world, is strong when dry but lacks structural integrity when exposed to moisture. Chemical additives such as cement and lime are added into the adobe mix to protect the brick against moisture decomposition. Once the chemicals are added and the mix is formed into a brick, a stabilized adobe brick is formed.

Cement, …

Optimization Of Two-Way Post-Tensioned Concrete Floor Systems, Gaelyn B. Krauser

Master's Theses

This thesis investigates a parametric study of a flat plate floor system designed using post-tensioning. The load balanced by the post-tensioning, the slab depth, and the strength of concrete were varied to create the parametric study of a hotel/condominium grid layout. In order to perform the parametric study, research was conducted on the development of post-tensioning, methods of analysis for two-way slab design, and post-tensioning methods of analysis. Design was conducted by hand through a series of Excel spreadsheets and compared to results found using the computer analysis program, ADAPT-PT. The designs found in the parametric study were then used …

Model For Reinforced Concrete Members Under Torsion, Bending, And Shear. Ii: Model Application And Validation, Gary Greene, Abdeldjelil Belarbi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A model was recently proposed for predicting the load-deformation response of a reinforced concrete member under torsion combined with bending and shear to spalling or ultimate. This paper shows the application of the model to create interaction surfaces to predict the failure of a member subjected to different ratios of applied torsion, bending, and shear. the model was validated by comparing the predicted and experimental behavior of 28 members from three experimental studies available in the literature. the members were loaded under torsion combined with different ratios of bending, and shear. the torque-twist behavior, reinforcement stress, and concrete surface strain …

Model For Reinforced Concrete Members Under Torsion, Bending, And Shear. I: Theory, Gary Greene, Abdeldjelil Belarbi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A model has been developed that can predict the load-deformation response of a reinforced concrete (RC) member subjected to torsion combined with bending and shear to spalling or ultimate capacity. the model can also be used to create interaction surfaces to predict the failure of a member subjected to different ratios of applied torsion, bending, and shear. the model idealizes the sides of a reinforced concrete member as shear "wall panels." the applied loads are distributed to the wall panels as uniform normal stresses and uniform shear stresses. the shear stress due to an applied torsional moment and shear force …

Graham, Robert Duke, 1900-1984 (Sc 1972), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid and scan (Click on "Additional Files" below) for Manuscripts Small Collection 1972. Specifications from Ingram and Ingram, Architects and Engineers (Louisville, Kentucky) for a new residence to be built for Mr. and Mrs. Robert D. Graham, 1716 Normal Drive, Bowling Green, Kentucky.

Fatigue Of Masonry Walls With Cfrp Applied Externally For Out-Of-Plane Loads, Joseph Louis Williams

Master's Theses

This master’s thesis presents an investigation on the effects of fatigue on fiber- reinforced polymers (FRP) when applied to masonry walls subjected to out-of-plane loading. The project aims to provide further research and add to the general testing database of FRP enhanced masonry. An introduction to the problems and solutions associated with unreinforced masonry is discussed along with a literature review on previous testing done in the field of FRP enhanced masonry. The investigation on the effects of fatigue on FRP when applied to masonry walls subjected to out-of-plane loading is performed through experimental testing. A total of four wall …

Breaking The Mould 3, Joseph Little

Articles

This article is the third in a series looking at thermal upgrades to single-leaf walls of existing houses. The theme for this article was intended to be an analysis of various drylining options for brick and rubble-built walls of older properties. That will follow. The following events forced a change in focus.

Lignin And Lipid Impact On Sorption And Diffusion Of Trichloroethylene In Tree Branches For Determining Contaminant Fate During Plant Sampling And Phytoremediation, Gayathri Gopalakrishnan, Joel Gerard Burken, Charles J. Werth

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Plants Draw All They Need from their Surrounding Environment and in Doing So Also Draw Anthropogenic Contaminants from their Surroundings. Several Natural Processes (E.g., Active Transport, Diffusion, Sorption, and Degradation) Occur within Trees and Affect Chemical Concentrations in Tree Samples. This Study Elucidates Tree Contaminant Chemical Interactions on Equilibrium Sorption and Diffusion into Branch Tissue (I.e., Wood Core and Bark), Specifically the Impacts of Lipid and Lignin Content. Five Tree Species Were Selected to Span a Range of Lignin and Lipid Contents. Linear Isotherms Were Obtained for All Sampled Species over a Limited Concentration Range (2 Μg/ ML < C Gas < 12 Μg/mL), and Equilibrium Distribution Coefficients (Kd) Were Linearly Correlated to Lipid (R2 > 0.83) But …

Conference Review - 4th International Phytotechnologies Conference, Denver, Co, September 24-26, 2007, Jason C. White, Joel G. (Gerard) Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.