Architectural Engineering Commons^™

Discomfort Glare From Small, High Luminance Light Sources In Outdoor Nighttime Environments, Yulia I. Tyukhova

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The overarching goal of this research was to examine humans’ subjective and physiological responses to small, high luminance light sources in outdoor nighttime environments. Currently, discomfort glare is rarely calculated in lighting practice (Remaking Cities Institute (RCI) 2011), partly, because it is not known which metric predicts glare most accurately in the given application.

This dissertation describes a parametric experiment evaluating the effects of three glare source luminances (20,000; 205,000; 750,000 cd/m²), two source positions (0°, 10°), two source sizes (10^-5, 10^-4 sr), and three background luminances (0.03; 0.3; 1 cd/m²) on the …

Releasing The Unconsciousness | Visualizing The City, Taihui Li

Architecture Senior Theses

This thesis explores how subway stations lost their identity as strategic node of connectivity which constructed the prevailing image of New York City. In Civilization and Its Discontents (1930), Sigmund Freud famously compared the human mind to the city of Rome. He argues that both contain strata of memory and history which have accumulated over the years through a messy and ad-hoc process. Like Rome, New York City also has a layered history, albeit not as deep.

This thesis contends that the subway entrance serves as an experiential entre into the unconscious experience of the unknown elements of the past. …

Block Sparse Memory Improved Proportionate Affine Projection Sign Algorithm, J. Liu, S. L. Grant

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A block sparse memory improved proportionate affine projection sign algorithm (BS-MIP-APSA) is proposed for block sparse system identification under impulsive noise. The new BS-MIP-APSA not only inherits the performance improvement for block-sparse system identification, but also achieves robustness to impulsive noise and the efficiency of the memory improved proportionate affine projection sign algorithm (MIP-APSA). Simulations indicate that it can provide both faster convergence rate and better tracking ability under impulsive interference for block sparse system identification as compared with APSA and MIP-APSA.

Issues Facing Design Professionals Through The Lens Of Two Rain-Induced Roof Collapses, J. W. Lawson, M. E. Parolini

Architectural Engineering

The drainage of low-sloped roof systems involves multiple design professionals, and often each has a different opinion as to their design responsibility. Roofing issues have been identified as being a number one source of litigation, and rain-induced roof collapses continue to occur with alarming frequency. With the backdrop of several rain-induced roof collapses, this paper illustrates the complexity of assigning design responsibility for drainage systems; and investigates a variety of outcomes associated with the current building code provisions transporting rainwater from large low-sloped roof structures.

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

"Defining Job Titles And Career Paths In Bim", Malachy Mathews

Conference papers

Ireland is undergoing a digital transformation. Some industries particularly in the areas of travel and retail have been radically transformed. However many industries are facing their biggest challenge in their existence already weakened by the economic crisis and constrained by their legacy business, it will be difficult for them to adapt and embrace the new rules dictated by digital change. Irelands design and construction industry is on the cusp of a digital transformation with early adopters now deriving some benefits from a move to a building information modeling (BIM) process. Digital transformation cannot happen unless there are personnel with the …

Interactive Pavillions: Responsive Transformation Of Structure Systems, Xiangru Chen

Architecture Thesis Prep

With the personal interest in tectonic design and kinetic structure arts. This study is aimed to explore the application of interactive technology in the transformation of the structure system in a tectonic architecture design--- to cross the gap between static tectonic design and kinetic structure in small scale. The responsive pavilion will sense and respond to the verification of gravity loads (for occupancy detection) and lights (for solar energy), with the spatial transformation of the entire structure system. As a result, the form of the architecture will follow the function. The responsive pavilion will spatially respond to the varied occupancy …

Radial Strain Behaviors And Stress State Interpretation Of Soil Under Direct Simple Shear, Xin Kang, Yao Cheng, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Radial strain behaviors and stress state interpretation methods of silica sand consolidated at different K0 values under modified direct simple shear were investigated in this research. Consolidated drained triaxial compression test, direct shear box test, and wire reinforced direct simple shear tests were conducted, and the test results were compared and linked with the modified direct simple shear tests. Based on the observed testing data, simple shear specimens with constant lateral stress exhibited relatively small radial strain during shear, especially under small shear strains. After the peak shear resistance has mobilized, radial strain increased rigorously until the specimen failed. Confining …

Benchmark Problems For Large Strain Consolidation, Patrick J. Fox, Hefu Pu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Modeling of the one-dimensional consolidation process for soil and other compressible porous media is important for a variety of engineering applications. This paper presents solutions for two benchmark problems for large strain consolidation of a saturated soil layer that can be used to check other analytical and numerical analysis methods. The solutions include effects of vertical strain, soil self-weight, nonlinear constitutive relationships, and changing material properties during the consolidation process. High-accuracy data are presented for each problem and include changes of settlement, void ratio, and excess pore pressure with time.

A Comparison Of The Bond Behavior Of Pbo-Frcm Composites Determined By Double-Lap And Single-Lap Shear Tests, Lesley Sneed, T. D'Antino, C. Carloni, C. Pellegrino

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the results of an investigation on the bond behavior and stress-transfer mechanism of polyparaphenylene benzo isoxazole (PBO) fiber-reinforced cementitious matrix (FRCM) composites bonded to a concrete substrate using double-lap and single-lap shear tests. Results of double-lap shear tests with different composite bonded lengths and widths are presented and compared with those from single-lap shear tests previously reported by the authors. The idealized load response developed from single-lap shear tests is found to characterize the response of the composite in double-lap shear tests, although with a few key differences. With the double-lap shear test, load redistribution among the …

Stable Isotope-Enabled Pathway Elucidation Of 2,4-Dinitroanisole Metabolized By Rhizobium Lichtii, Hunter W. Schroer, Kathryn L. Langenfeld, Xueshu Li, Hans Joachim Lehmler, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Recently developed military explosives are safer to handle, but more environmentally mobile, than traditional explosives. The new insensitive munitions, including 2,4-dinitroanisole (DNAN), have been sparsely studied, making the use of bacterial and/or plant-based remediation approaches unfeasible without further information about the transformation of these compounds. To that end, Rhizobium lichtii isolated from willow tree tissues were studied and observed to completely degrade 5 mg L-1 DNAN within 24 h in liquid media with added carbon and nitrogen. The use of DNAN, [13C6] DNAN, and [15N2] DNAN enabled the identification of 11 previously unknown metabolites resulting from sulfation, acetylation, and/or methylation …

Designing A Resilient Building In The Coastal Zone, Don Kranbuehl, David Pryor

October 30, 2015: Beyond Toolkits: Adaptation Strategies and Lessons

No abstract provided.

Rans Modeling Of Stably Stratified Turbulent Boundary Layer Flows In Openfoam®, Jordan M. Wilson, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Quantifying mixing processes relating to the transport of heat, momentum, and scalar quantities of stably stratified turbulent geophysical flows remains a substantial task. In a stably stratified flow, such as the stable atmospheric boundary layer (SABL), buoyancy forces have a significant impact on the flow characteristics. This study investigates constant and stability-dependent turbulent Prandtl number (Prt) formulations linking the turbulent viscosity (νt) and diffusivity (κt) for modeling applications of boundary layer flows. Numerical simulations of plane Couette flow and pressure-driven channel flow are performed using the Reynolds-averaged Navier-Stokes (RANS) framework with the standard k-ϵ turbulence model. Results are compared with …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Enhanced Series-Parallel Model For Estimating The Time-Dependent Thermal Conductivity Of Fly Ash Soil Mixtures, Xin Kang, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

An enhanced series-parallel (S-II) model of one-dimensional conductive heat flow through a unit cell was developed to estimate the time-dependent thermal conductivity of Class C fly ash stabilized soils. The unit cell is composed of three separate heat flow paths: a continuous path through solid contacts (soil contacts, fly ash contacts, and soil fly ash contacts) in parallel arrangement, a series-parallel path of solids in a series arrangement with a parallel arranged path of solid-miniscule pores (miniscule portion of solid water and miniscule portion of solid air), and a continuous path through water and air in parallel arrangement. The solid-miniscule …

The Bridge Newsletter Winter 2015, Missouri University Of Science And Technology

The Bridge Newsletter

-S&T’s Solar House Design Team sets out to redefine the American housing market
-A monumental anniversary
-Academy awards Sneed
-ASCE honors Holmes

Distributed Yielding Concept For Improved Seismic Collapse Performance Of Rigid Wall-Flexible Diaphragm Buildings, Maria Koliou, Andre Filiatrault, Dominic J. Kelly, John W. Lawson

Architectural Engineering

Rigid wall-flexible diaphragm (RWFD) buildings are a common type of single-story construction in North America, Europe, and New Zealand that incorporate rigid in-plane concrete or masonry walls and flexible in-plane wood, steel, or hybrid roof diaphragms. RWFD buildings have shown poor seismic performance during past earthquake events. In particular, it has been observed that the global seismic response is dominated by the response of the diaphragm, which is mainly attributed to large in-plane diaphragm displacements that significantly exceed the displacements of in-plane walls. In this study, the concept of distributed yielding in the flexible diaphragm by weakening certain intermediate diaphragm …

Bim; Postgraduate Multidisciplinary Collaborative Education, Malachy Mathews

Conference papers

BIM Technologies and Process are steadily increasing in the design and construction industry. The amount of undergraduate courses delivering BIM based applied and theory courses is also on the rise. These students will be entering a job market where their skillsets in digital modelling and collaborative practice will be in demand. However, existing AEC (architectural, engineering, construction) professionals are recognising the changes happening in the industry. Each domain is influenced and challenged by BIM. The traditional process and workflows will change as BIM adoption grows. Tobin [1] states the long-term impact of any innovation is often not understood when it …

Pigs Feet, Jesse W. Standlea

The Transdisciplinary STEAM+ Journal

My sculpture “Pigs Feet” has literal foundations upon casts of live pig’s feet. I locally sourced the pig’s feet before casting them. My sculpture makes use of a once cutting edge casting technology, alginate. Alginate molds were once the standard in dentistry. Alginate is an appealing casting material as it is refined from brown seaweeds, is both food and skin safe, it is suitable for educators, for artists and engineers alike.

Physical Models In The Reinforced Concrete Design Classroom, Anahid A. Behrouzi

Architectural Engineering

An overview is presented of various physical demonstration tools intended to supplement lectures in topic areas that students consistently identify as being troublesome. The article describes the design, fabrication, and implementation of classroom models to help explain flexural behavior and detailing of beams, slabs, and frame systems.

Assessment Of Empirical Equations For The Compression Index Of Fine-Grained Soils In Missouri, Site Onyejekwe, Xin Kang, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of correlations and empirical relationships in geotechnical engineering provides a fast, cost-effective means of predicting the value of a parameter based on the values of certain other, possibly more easily determined, parameters. The correlation between two or more soil properties has been found to be dependent in varying degrees on soil type, the testing method used to obtain the numerical value of the parameter itself and the homogeneity of the soil. Many empirical correlations among soil properties have been published. These correlations, based on widely sourced data, may not be appropriate for local situations. Hence, there is a …

Accumulation Of Gas-Phase Methamphetamine On Clothing, Toy Fabrics, And Skin Oil, G. Morrison, N. V. Shakila, K. Parker

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To better understand methamphetamine exposure and risk for occupants of former residential clandestine methamphetamine laboratories, we measured the dynamic accumulation of methamphetamine in skin oil, cotton and polyester (PE) clothing, upholstery, and toy fabric (substrates) exposed to 15-30 ppb (91-183 μg/m3) neutral methamphetamine in air for up to 60 days. The average equilibrium partition coefficients at 30% RH, in units of μg of methamphetamine per gram of substrate per ppb, are 3.0 ± 0.2 for a PE baby blanket, 5.6 ± 3.5 for a PE fabric toy, 3.7 ± 0.2 for a PE shirt, 18.3 ± 8.0 for a PE/cotton …

The Effect Of Classical Order On The Seismic Behavior Of Ancient Masonry Columns, Cody M. Buckley

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

The design and erection of columns in classical Greece and Rome was a deceptively complicated task. Ancient engineers were not guided by a set of building codes, resulting in several regional design variations. The writer Vitruvius condensed these variations into three archetypes or “orders” defined by proportions based on an arbitrary “module.”

The goal of this thesis is to better understand the effect of these proportions on the seismic response of ancient columns through the use of Equivalent Lateral Force Procedure and finite element analysis software. To this end, a parametric study of linearly elastic, free-standing columns with homogeneous material …

Design Guideline To Select Systems And Strategies To Achieve Adequate Indoor Air Quality In The Mojave Desert Climate Region, Nicholas Robert Williams Inouye

UNLV Theses, Dissertations, Professional Papers, and Capstones

The awareness of climate change has led to many energy-related changes in

building behavior and space conditioning systems. Unfortunately, these changes often

led to the degradation of indoor air quality (IAQ) in residential construction. In an effort

to improve IAQ, a design guideline was developed for homeowners in the Mojave

Desert. A case study designed for the U.S. Department of Energy, Race to Zero

Student Design Competition was used to develop the design guideline. The design

guideline and compilation of codes and standards that affect both IAQ and space

conditioning shall be used in tandem by Mojave Desert homeowners to …

Thermal Energy Storage In Building Integrated Thermal Systems: A Review. Part 2. Integration As Passive System, Dervilla Niall, Sarah Mccormack, Philip Griffiths, Luisa Cabeza, Lidia Navarro, Albert Castell, Alvaro De Grazia, Maria Brown

Articles

Energy consumption trends in residential and commercial buildings show a significant increase in recent decades. One of the key points for reducing energy consumption in buildings is to decrease the energy demand. Buildings envelopes are not just a structure they also provide protection from outdoor weather conditions always taking into account the local climate. Thermal energy storage has been used and applied to the building structure by taking advantage of sensible heat storage of materials with high thermal mass. But in recent years, researchers have focused their studies on the implementation of latent heat storage materials that if well incorporated …

Chemically Stabilized Soft Clays For Road-Base Construction, Xin Kang, Gi Chun Kang, Kuang Tsung Chang, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Soft clays are widely distributed in Missouri, United States. Due to their relatively low strength and high compressibility, subgrade construction in soft clays has encountered many difficulties. In recent practice, the use of fly ash (FA) along with lime to tackle soft subgrade problems has shown promising results. The effectiveness of Class C FA and lime kiln dust (LKD) in clay subgrade stabilization is examined in this research. Scanning electron microscopic (SEM) analysis, proctor compaction tests, unconfined compression tests, and resilient modulus tests were carried out on the FA and LKD modified soil mixtures. Test specimens were prepared at optimum …

Room Acoustic Effects On Speech Comprehension Of English-As-Second-Language Talkers And Listeners Versus Native-English-Speaking Talkers And Listeners, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Approximately 21% of the children in the United States school system speak a language other than English at home, but are being taught in English at school. English is additionally being used more and more often as a common language in international settings, even though participants at these international events again are not native English speakers. How do adverse room acoustic environments, including higher background noise levels and longer reverberation times, impact English-as-a-Second-Language (ESL) talkers and listeners versus native English-speaking talkers and listeners? This presentation focuses on two recent studies at the University of Nebraska that investigate how assorted room …

Quantification And Subjective Perception Of Varying Reflection Densities In Measured Room Impulsed Responses, Hyun Hong, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This project focuses on quantifying and testing the subjective perception of reflection densities, or the number of reflections per second, from different room impulse responses. The widely used room acoustic metric, reverberation time, is linked to the perceived reverberation in a room. Two different rooms having the same reverberation time, though, can have different reflection densities in their room impulse responses, and this difference in reflection density may affect how listeners perceive spatial impression in rooms. To investigate how sensitive humans are to a change of reflection density, this paper first reviews assorted parameters for quantifying reflection density from measured …

New Civil Engineering Program Criteria: The Rest Of The Story, Allen Estes, Thomas A. Lenox, Richard O. Anderson P.E.

Architectural Engineering

The American Society of Civil Engineers (ASCE) organized the Civil Engineering Program Criteria Task Committee in October 2012 whose charge is to determine if the current ABET Civil Engineering Program Criteria (CEPC) should be changed to reflect one or more of the 24 outcomes of the second edition of the Civil Engineering Body of Knowledge published in 2008. After two years of work, a proposed CEPC has been approved by the relevant ASCE committees and forwarded to ABET for approval and incorporation into accreditation criteria. A paper chronicling the committee’s efforts through a review of the literature, the committee’s methodology …

Recent Advances In Indoor Chemistry, Glenn Morrison

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Just as the chemistry creates urban smog and aerosols that influence climate change, chemistry in building air can alter the indoor environment for better or worse. This review focuses on chemical pathways initiated by oxidants that infiltrate from outdoor air and other indoor-sourced reactants and surfaces that make these environments unique chemical reactors. Ozone reacts with fragrance molecules, tobacco smoke residues, and even human skin oils to generate a host of oxidized organic compounds, secondary organic aerosols, and irritants. Nitrous acid is formed on indoor surfaces and is subsequently cleaved by even the relatively dim light indoor. This raises the …