Architectural Engineering Commons^™

Heat Pump And Air Conditioning Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An expectation module determines an expected average power consumption of a heat pump for a predetermined period as a function of indoor and outdoor temperatures of the building during the predetermined period. A difference module determines a power difference between an average power consumption of the heat pump during the predeter mined period and the expected average power consumption of the heat pump for the predetermined period. A grade determination module determines a grade of the heat pump for the predetermined period based on the power difference of the predetermined period. A reporting module generates a displayable report including the …

Building Envelope And Interior Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A difference module determines differences between an outdoor ambient temperature and an indoor temperature, determines a first average of the differences , and determines a second average of the differences. A storing module stores a first data point, the first data point including the first average and a first total run time of a heating, ventilation, and/or air conditioning (HVAC) system, and stores a second data point, the second data point including the second average and a second total run time of the HVAC system. A fitting module fits a line to the first and second data points. An envelope …

Post-Earthquake Assessment And Numerical Modeling Of Freestanding Heritage Structures, M. Khalid Saifullah, Christine E. Wittich

Department of Civil and Environmental Engineering: Faculty Publications

Historic and heritage structures are particularly vulnerable to earthquakes, where damage or collapse can not only lead to loss of a structure but also the loss of irreplaceable heritage. Many heritage structures can be classified as freestanding (detached) structures, including unreinforced masonry walls, classical multi-drum columns, and statue-pedestal systems. However, the seismic response of freestanding structures (sliding, rocking, rock-slide, overturning) is poorly predicted by existing methods due to geometric non-linearities as well as sensitivity to interface conditions and modeling parameters. Previous studies have focused on analytical modeling of simplified systems and/or experimentation under controlled laboratory conditions. In contrast, this paper …

Experiencing Extreme Height For The First Time: The Influence Of Height, Self-Judgment Of Fear And A Moving Structural Beam On The Heart Rate And Postural Sway During The Quiet Stance, Mahmoud Habibnezhad, Jay Puckett, M. S. Fardhosseini, Houtan Jebelli, Terry Stentz, L. A. Pratama

Durham School of Architectural Engineering and Construction: Faculty Publications

Falling from elevated surfaces is the main cause of death and injury at construction sites. Based on the Bureau of Labor Statistics (BLS) reports, an average of nearly three workers per day suffer fatal injuries from falling. Studies show that postural instability is the foremost cause of this disproportional falling rate. To study what affects the postural stability of construction workers, we conducted a series of experiments in the virtual reality (VR). Twelve healthy adults—all students at the University of Nebraska-Lincoln—were recruited for this study. During each trial, participants’ heart rates and postural sways were measured as the dependent factors. …

Prediction Of Stress Increase At Ultimate In Unbonded Tendons Using Sparse Principal Component Analysis, Eric Mckinney, Minwoo Chang, Marc Maguire, Yan Sun

Durham School of Architectural Engineering and Construction: Faculty Publications

While internal and external unbonded tendons are widely utilized in concrete structures, an analytical solution for the increase in unbonded tendon stress at ultimate strength, ∆f_ps, is challenging due to the lack of bond between strand and concrete. Moreover, most analysis methods do not provide high correlation due to the limited available test data. The aim of this paper is to use advanced statistical techniques to develop a solution to the unbonded strand stress increase problem, which phenomenological models by themselves have done poorly. In this paper, Principal Component Analysis (PCA), and Sparse Principal Component Analysis (SPCA) …

A Practitioner’S Guide To Small Unmanned Aerial Systems For Bridge Inspection, Sattar Dorafshan, Robert J. Thomas, Calvin Coopmans, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Small unmanned aerial system(s) (sUAS) are rapidly emerging as a practical means of performing bridge inspections. Under the right condition, sUAS assisted inspections can be safer, faster, and less costly than manned inspections. Many Departments of Transportation in the United States are in the early stages of adopting this emerging technology. However, definitive guidelines for the selection of equipment for various types of bridge inspections or for the possible challenges during sUAS assisted inspections are absent. Given the large investments of time and capital associated with deploying a sUAS assisted bridge inspection program, a synthesis of authors experiences will be …

Hvac System Air Filter Diagnostics And Monitoring, Priotomo Abiprojo, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A system and method for monitoring a heating, ventilation, or air conditioning (HVAC) system of a building is provided. A monitoring server, located remotely from the building, receives operating parameter data from a monitoring device at the building that measures an operating parameter of the HVAC system. The monitoring server generates a plurality of data clusters from the operating parameter data, each data cluster corresponding to operating parameter data generated during steady-state operation of the HVAC system. The monitoring server calculates an average operating parameter value for each data cluster. The monitoring server calculates normalized operating parameter values based on …

Comparison Of Wind Farm Layout Optimization Results Using A Simple Wake Model And Gradient-Based Optimization To Large-Eddy Simulations, Jared J. Thomas, Jennifer Annoni, Paul Fleming, Andrew Ning

Faculty Publications

The models used during wind farm layout optimization use simplifying assumptions that can alter the design space. Some characteristics of the simple models may negatively influence the resulting layouts. In this paper, we perform wind farm layout optimization using a simple wake model and compare the resulting improvements to large-eddy simulation (LES) results to confirm that the layout was actually improved. We begin by describing the models used, including changes specific for use with gradient-based optimization. We then compare our models’ output to previously published model and LES results. Using the models described, we performed gradient-based wind farm layout optimization …

Best Practices For Wake Model And Optimization Algorithm Selection In Wind Farm Layout Optimization, Nicholas F. Baker, Andrew P.J. Stanley, Jared J. Thomas, Andrew Ning, Katherine Dykes

Faculty Publications

This paper presents the results of two case studies regarding the wind farm layout optimization problem. We asked members of the computational optimization and wind communities to take part in the studies that we designed. Nine individuals participated. Case study 1 considered variations in optimization strategies for a given simple Gaussian wake model. Participants were provided with a wake model that outputs annual energy production (AEP) for an input set of wind turbine locations. Participants used an optimization method of their choosing to find an optimal wind farm layout. Case study 2 looked at trade-offs in performance resulting from variation …

Epics Gaqt: Nandi Clean Kitchen Study, Yichen Fan

Engagement & Service-Learning Summit

No abstract provided.

Solar & Rain Catching Canopy "Urban Oasis 2", Afolabi Ibitoye, Cheriyah Wilmot, Alexander Aptekar, Grzegorz Kosieradzki, Kaiyrgul Sultanova, Jude Vallon

Publications and Research

The accumulation of water runoff during rain storms is a major problem in New York City’s combination water systems, forcing water treatment plants to release untreated excess water. To avoid overfilling of the sewer system by this grey water, pocket parks and gardens will be used to absorb the excess rainfall. We will be harnessing nature’s resources with current technologies such as: solar panels combined with rain catching canopies, to beautify the environment, educate the public about sustainability, stimulate growth to local businesses through increased foot traffic and bringing social awareness on environmental issues.

The canopies are designed to collect …

Data Driven Approach To Thermal Comfort Model Design, Mostafa Rafaiejokandan

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Apart from the dominant environmental factors such as relative humidity, radiant, and ambient temperatures, studies have confirmed that thermal comfort significantly depends on internal personal parameters such as metabolic rate, age, and health status. This study reviews the sensitivity of the Predicted Mean Vote (PMV) thermal comfort model relative to its environmental and personal parameters of a group of people in a space. PMV model equations adapted in ASHRAE Standard 55–Thermal Environmental Conditions for Human Occupancy, are used in this investigation to conduct a parametric study by generating and analyzing multi-dimensional comfort zone plots. It has been found that personal …

Assessment Of Small-Scale Anisotropy In Stably Stratified Turbulent Flows Using Direct Numerical Simulations, Amrapalli Garanaik, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the validity of the widely used Kolmogorov hypothesis of local isotropy of dissipative scales in stably stratified turbulent flows is investigated using high-resolution direct numerical simulations. Departure from isotropy is investigated for the first time in terms of the turbulent Froude number defined as Fr = ϵ/(NEk), where N is the buoyancy frequency, Ek is the turbulent kinetic energy, and ϵ is the rate of dissipation of turbulent kinetic energy. It is shown that for both ϵ and the rate of scalar (density) dissipation, ϵρ, the small-scale statistics are nearly isotropic in the weakly stratified turbulent regime …

Clt Shearwall Dovetail Connection, Alexander Eduardo Esser, August Messano

Architectural Engineering

As cross-laminated timber has become an increasingly popular construction material, its use as a shear wall element has also demanded attention. Primary obstructions to the use of CLT shear walls have been the lack of an economic connection type that does not compromise the structural integrity and has the robustness that CLT shear wall panels deserve. Dovetail connections provide a great option for the connection of CLT shear walls. With more experimentation, the optimal dovetail geometry can be further developed. The small-scale testing done in conjunction with this report proved that very deep pins and tails will result in bearing …

Evaluation Of Hospital Soundscapes To Improve Patient And Staff Experience, Jay Bliefnick

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Hospital soundscapes can be difficult environments to assess acoustically due to the continuous activity within units. Routinely, patients perceive these soundscapes poorly when rating their hospital experience on HCAHPS (Hospital Consumer Assessment of Healthcare Providers and Systems) surveys administered after discharge. In addition, hospital staff can be negatively impacted by the acoustical environments in which they work, affecting both performance and job satisfaction. This doctoral research addressed these issues across three phases by collecting acoustical measurements within three individual hospitals, comparing results with provided patient and staff survey information, and conducting laboratory tests of hospital noise perception. In the first …

An Investigation Of Sustainability Issue For Building Construction In North Cyprus, Hasan Samih Kalwry M.Sc., Halil Zafer Alibaba Associate Professor

Journal of Environmental Sustainability

The action of construction it is perceived to have a significant influence on the environmental assessment. In spite of the confession that environmental issues are significant in the construction field, and is slow to alteration the conventional way to combine environmental issue as part of the decision process. With increased information and awareness about these influence, among these sustainable building construction and material issues. In this article was began with investigate these issues in the North Cyprus, a questionnaire survey was conducted to investigate the scale of awareness, learning and implementation of sustainability in practices between architect’s perception and how …

Social Sustainability: The Assessment Of Neighbourhood Parks Live Ability In Sharjah City, Rana Helmy A. Elthabwabta

Architectural Engineering Theses

This research aims to assess neighbourhood social sustainability and live ability by investigating the ways in which users perceive neighbourhood spatial design and context. The research applied the social sustainability model to assess and question neighbourhood park live ability in Sharjah City.

Following a qualitative case study approach, the research operationalized social sustainability principles through several tools: survey, field observations and mapping. The conducted analysis was based on a compilation of coded data from the survey consistent with the applied principles of social sustainability.

The research findings confirm variables related to neighbourhood parks spatial context design and people perception. Thus …

Tanzanian Cement Block, Emmanuel Castano-Bonilla, Leah Holleran, Kristy Sanchez

Architectural Engineering

The construction plans for a polytechnic college are being developed in the town of Same, Tanzania, Africa. This project is sponsored by the Mbesese Initiative for Sustainable Design (MISD), a non-profit that has partnered with design firms such as ARUP and KLA architects to complete the work. Considering that the site is located in rural Tanzania, material availability is limited. A local block maker produces a mechanically pressed brick that consists solely of sand, cement and water. The bricks are unconventional when compared to those made in the United States. The purpose of this study is to understand the block …

The Bridge Newsletter Winter 2018, Missouri University Of Science And Technology

The Bridge Newsletter

-Pouring the cornerstone for the ACML
-Showalter selected as Kiewit Faculty Scholar
-Ma tests a low-cost method of strengthening concrete

Kind Gestures: Longtime Aci Members Shape The Career Of Younger Generations, Anahid A. Behrouzi

Architectural Engineering

In this article, an Assistant Professor at California Polytechnic State University describes how her involvement with ACI has helped her to embark on projects that, as a young faculty member, she could have never envisioned. She also tells of her first ACI convention in Spring 2013, her first interaction with ACI Committee 133, Disaster Reconnaissance, in 2014, and using the ACI 318 Building Code in the classroom.

Full Proceedings, 2018, Jianshun Zhang

International Building Physics Conference 2018

Full conference proceedings for the 2018 International Building Physics Association Conference hosted at Syracuse University.

Coir Fiber Reinforced Concrete, Jose De La Serna, Moses Karakouzian

AANAPISI Poster Presentations

This poster exhibits the testing and research done on general Portland Cement Concrete with the addition of coir (coconut) fibers as reinforcement. Using the fundamental constituents of cement (water, cement, fine and coarse aggregate) and processed coir fiber, concrete specimens were batched to test for compressive and flexural strengths (per appropriate ASTM standards). Cylindrical and rectangular beam specimens were subjected to loadings until failure occurred. The capacity and modes of failures of the specimens were observed. It was determined that:

• The addition of processed coir fibers decreases the overall strength of general Portland Cement Concrete. • The tested concrete’s …

The Evaluation Of Current Wall-To-Roof Anchorage Force Provisions For Single-Story Concrete And Masonry Buildings With Lightweight Flexible Diaphragms, John Lawson, Maria Koliou, Andre Filiatrault, Dominic Kelly

Architectural Engineering

Along the seismically active west coast of the United States (US), heavy concrete and masonry walled buildings with lightweight wood or steel flexible roof diaphragms are commonplace and have grown in size over the years. The current force levels found in ASCE’s Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-16) for designing the out-of-plane wall anchorage system in these buildings is the result from a series of California earthquakes, causing a series of structural failures and subsequently revisions to the Uniform Building Code (UBC). This trial-and-error approach is the basis for current wall anchorage code …

The Adoption Of A Design Build Approach In Retrofit Projects – A Descriptive Case Study, Lloyd Scott

Conference papers

The delivery Design Build projects across the built environment in Ireland has begun to take significant shape. There are many examples of the traditional are moving towards more collaborative practices. There exists support for the integration of a design build project approach in the retrofit realm where designer, client and developer can work collaboratively. As with the regular design build process the intent behind this collaborative approach is to encourage those associated with the built environment to consider how retrofit design and construction can contribute positively to addressing elements of climate change and the design build process. The opportunity to …

Exploratory Study Into Sustainability Expertise In The Irish Architecture, Engineering And Construction (Aec) Sector, Lloyd Scott, Emmanuella Asantewaa Twumasi

Conference papers

The Architecture, Engineering and Construction (AEC) sector is a rich environment, involving the use of expertise at various levels with much intensity and in unique situations. In the attainment of sustainable construction, construction sustainability performance is indispensable. The participants implementing sustainable construction practices are key to a sustainable construction sector. This study seeks to understand the level of sustainability expertise in the Irish AEC sector which is part of an ongoing research at the Technological University of Dublin, within the School of Surveying and Construction Management. The early explorative phase of this research involves getting a depth of understanding as …

An Introduction To Deep Learning, Maria Pantoja, Anahid A. Behrouzi, Drazen Fabris

Architectural Engineering

Deep learning (DL) is currently being researched and implemented to solve civil engineering related problems, including autonomous inspection and inventory of civil infrastructure projects. The article introduces DL, specifically a convolutional neural network and the supervised learning process used to train a model that will enable professional structural engineers to automatically detect types of earthquake damage.

A Framework For Estimating Immediate Interdependent Functionality Reduction Of A Steel Hospital Following A Seismic Event, Emad M. Hassan, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Functionality of an infrastructure is its ability to provide its intended services. Maintaining an acceptable level of infrastructure functionality, particularly for critical infrastructure, following an extreme event is vital for effective community recovery. Estimating functionality depends on proper quantification of losses, which requires accurate assessment of infrastructure damage. The damage is presented in the form of fragility functions that are generally developed using nonlinear finite element analysis. To date, no study has been conducted to assess the effect of modeling approach on seismic fragilities of an infrastructure, the associated losses, and functionality reduction. In addition, existing frameworks for estimating functionality …

Revisiting Earthquake Lessons: Wall Anchorage To Flexible Diaphragms, John W. Lawson

Architectural Engineering

In the 1971 San Fernando earthquake, large numbers of concrete tilt-up warehouse buildings had partial roof collapses as perimeter walls separated from the roof. The culprit was a design flaw that relied upon wood ledgers in cross-grain tension/bending for anchorage of the wall to the roof diaphragm. In the 1984 Morgan Hill and 1989 Loma Prieta earthquakes, instrumented tilt-up buildings indicated that past code-level anchorage forces were too low; and in the 1994 Northridge earthquake it was observed that anchorage systems had insufficient ductility and overstrength to resist the high force demands.

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

Molecular Dynamics Simulation Study On The Possible Factors Affecting Stability Of Ods Steel, M. Mustafa Azeem, Zhongyu Li, Qingyu Wang, Abid Hussian

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Oxide-dispersed-strengthened (ODS) steel has excellent mechanical, thermodynamic and radiation resistant properties, which makes it an important candidate material for high-Temperature reactors applications. Radiation stability of oxide is very important to study at the atomic level. In present case molecular dynamics (MD) simulation is used to study stabilities of Y₂O₃ particles in ODS steel as a function of particle sizes. The size dependence is obvious for particle sizes larger than 2.8 nm. Furthermore, the stabilities depend on charges of Y and O atoms.