Optics Commons^™

Harnessing Spatial Intensity Fluctuations For Optical Imaging And Sensing, Milad Akhlaghi Bouzan

Electronic Theses and Dissertations

Properties of light such as amplitude and phase, temporal and spatial coherence, polarization, etc. are abundantly used for sensing and imaging. Regardless of the passive or active nature of the sensing method, optical intensity fluctuations are always present! While these fluctuations are usually regarded as noise, there are situations where one can harness the intensity fluctuations to enhance certain attributes of the sensing procedure. In this thesis, we developed different sensing methodologies that use statistical properties of optical fluctuations for gauging specific information. We examine this concept in the context of three different aspects of computational optical imaging and sensing. …

Thermal And Waveguide Optimization Of Broad Area Quantum Cascade Laser Performance, Matthew Suttinger

Electronic Theses and Dissertations

Quantum Cascade Lasers are a novel source of coherent infrared light, unique in their tunability over the mid-infrared and terahertz range of frequencies. Advances in bandgap engineering and semiconductor processing techniques in recent years have led to the development of highly efficient quantum cascade lasers capable of room temperature operation. Recent work has demonstrated power scaling with broad area quantum cascade lasers by increasing active region width beyond the standard ~10 ?m. Taking into account thermal effects caused by driving a device with electrical power, an experimentally fitted model is developed to predict the optical power output in both pulsed …

System For Metal Coated Fiber Fabrication, Da Zhang

Electronic Theses and Dissertations

For many specific applications, such as sensors, aerospace, chemical industry, deep-well oil-field industry, metal-coated fiber shows strong abilities to satisfy people's requirement. With in-line coating technology, we are able to coat Aluminum on the fibers. Using electromagnetic induction, we can easily heat an electrically conducting thing such as a metal with the eddy current. This process is defined as Induction heating. And we will melt the Aluminum by this induction heating during drawing the fibers on the tower. Introduce the fiber tower system. The drawing process of in-line technology is formed of the following steps: Position, Melting, Forming into fibers, …

Picosecond Yb-Doped Fiber Amplifier, Weibin Zhu

Electronic Theses and Dissertations

Due to its versatility, rare earth doped fiber amplifier (RDFA) has attracted a lot of researchers worldwide in recent years. Depends on different kinds of rare earth ion, RDFA can be categorized into neodymium doped fiber amplifier (NDFA), erbium doped fiber amplifier (EDFA), thulium doped fiber amplifier (TDFA), and so forth. Among many kinds of RDFA, the ytterbium doped fiber amplifier (YDFA) has received even more interest, especially in high power application, mainly because of its broad gain bandwidth and high conversion efficiency which are due to its relatively simple electronic structure. The purpose of this research is to study …

Photothermal Lensing In Mid-Infrared Materials, Justin Cook

Electronic Theses and Dissertations

A thorough understanding of laser-materials interactions is crucial when designing and building optical systems. An ideal test method would probe both the thermal and optical properties simultaneously for materials under large optical loads where detrimental thermal effects emerge. An interesting class of materials are those used for infrared wavelengths due to their wide spectral transmission windows and large optical nonlinearities. Since coherent sources spanning the mid-wave and long-wave infrared wavelength regions have only become widely available in the past decade, data regarding their thermal and optical responses is lacking in literature. Photothermal Lensing (PTL) technique is an attractive method for …

Filament Wavefront Evolution, Daniel Thul

Electronic Theses and Dissertations

Filamentation is a complex process that gives rise to many nonlinear interactions. However, the fundamentals of filament formation and propagation can be explained in terms of two dominant mechanisms: Kerr self-focusing and plasma defocusing. The first to occur, self-focusing, is responsible for an increase in irradiance through beam collapse. This process requires sufficient initial peak power, on the order of gigawatts for near infrared beams in air. Plasma defocusing then arrests the collapse process once the irradiance reaches the ionization threshold of the medium. These two processes balance each other in an extended plasma channel known as a filament. A …

Novel Photonic Resonance Arrangements Using Non-Hermitian Exceptional Points, Hossein Hodaei

Electronic Theses and Dissertations

In recent years, non-Hermitian degeneracies also known as exceptional points (EPs) have emerged as a new paradigm for engineering the response of optical systems. EPs can appear in a wide class of open non-Hermitian configurations. Among different types of non-conservative photonic systems, parity-time (PT) symmetric arrangements are of particular interest since they provide an excellent platform to explore the physics of exceptional points. In this work, the intriguing properties of exceptional points are utilized to address two of the long standing challenges in the field of integrated photonics- enforcing single mode lasing in intrinsically multimode cavities and enhancing the sensitivity …

Generation Of High-Flux Attosecond Pulses And Towards Attosecond-Attosecond Pump-Probe Experiments, Yang Wang

Electronic Theses and Dissertations

At present, the energy of a single isolated attosecond pulse is limited to nanojoule levels. As a result, an intense femtosecond pulse has always been used in combination with a weak attosecond pulse in time-resolved experiments. To reach the goal of conducting true attosecond pump-attosecond probe experiments, a high flux laser source has been developed that can potentially deliver microjoule level isolated attosecond pulses in the 50 eV range, and a unique experimental end station has been fabricated and implemented that can provide precision control of the attosecond-attosecond pump-probe pulses. In order to scale up the attosecond flux, a unique …

Advancing Vibrational Spectroscopy For Cellular And Sub Cellular Analysis: Raman Spectroscopy As An In Vitro Chemotherapeutic Screeening And Assessment Protocol, Zeineb Farhane

Doctoral

Vibrational spectroscopy, including Raman micro-spectroscopy, has attracted considerable attention over the last few years, as a powerful, non-invasive tool for clinical applications, especially in cancer diagnosis, in vivo and ex vivo. As a molecular fingerprinting technique with optical resolution, Raman micro-spectroscopy is able to monitor biochemical processes, drug uptake, efficacy and mode of action and mechanisms of interaction of chemotherapeutic drugs at a subcellular level. In vitro applications may be more strategically achievable, and can help guide drug design and discovery, and eventually evaluate To this end, different lung cell lines were used and Raman micro-spectroscopy was coupled to valuable …

Raman Microscopic Analysis Of Internal Stress In Boron-Doped Diamond Thin Films, Emma M.A. Sundin

Open Access Theses & Dissertations

The correlations between induced stress on undoped and boron-doped diamond (BDD) thin films, sample chemical composition, and fabrication substrate are investigated in this study via confocal Raman microspectroscopic analysis. Stability of BDD films is relevant to fast-scan cyclic voltammetry, as film delamination and dislocation of BDD-coated electrodes that can occur during neurosurgical electrode implantation can negatively impact the biosensing reliability of this technique. Electrodes were fabricated by coating cylindrical tungsten rods using a custom-built chemical vapor deposition reactor. The results of the analysis reveal a direct correlation between regions of pure diamond and enhanced material stress, as well as preferential …

Imaging Live Drosophila Brain With Two-Photon Fluorescence Microscopy, Syeed Ehsan Ahmed

Open Access Theses & Dissertations

Two-photon fluorescence microscopy is an imaging technique which delivers distinct benefits for in vivo cellular and molecular imaging. Cyclic adenosine monophosphate (cAMP), a second messenger molecule, is responsible for triggering many physiological changes in neural system. However, the mechanism by which this molecule regulates responses in neuron cells is not yet clearly understood. When cAMP binds to a target protein, it changes the structure of that protein. Therefore, studying this molecular structure change with fluorescence resonance energy transfer (FRET) imaging can shed light on the cAMP functioning mechanism. FRET is a non-radiative dipole-dipole coupling which is sensitive to small distance …

N-Isopropylacrylamide-Based Photopolymer For Holographic Recording Of Thermosensitive Transmission And Reflection Grating, Tatsiana Mikulchyk, Suzanne Martin, Izabela Naydenova

Articles

In recent years, functionalized photopolymer systems capable of holographic recording are in great demand due to their potential use in the development of holographic sensors. This work presents a newly developed Nisopropylacrylamide(NIPA)-based photopolymer for holographic recording in reflection and transmission modes. The optimized composition of the material is found to reach refractive index modulation of up to 5  10-3 and 1.6  10-3 after recording in transmission and reflection mode, respectively. In addition to fulfilling the requirements for holographic recording materials, the NIPA-based photopolymer is sensitive to temperature and has lower toxicity than acrylamide-based photopolymers. Possible application of the …

Development And Characterisation Of A Bath-Based Vertical Blackbody Cavity Calibration Source For The Range −30 °C To 150 °C, Sam Boles, Igor Pušnik, Dubhaltach Mac Lochlainn, David Fleming, Izabela Naydenova, Suzanne Martin

Articles

Industrial use of Radiation Thermometers (RTs) is becoming increasingly common due to the perceived advantages and wide market availability. Blackbody Cavity Radiation Sources (BCRSs) are typically used for calibration of these instruments, and these cavities are oriented horizontally in most cases. For BCRSs based in thermal baths, this necessitates the use of custom-built baths with side openings. This paper presents a unique design of vertical bath-based BCRS that may be immersed in conventional calibration baths without modifications to the baths. The method, results, and analysis of an international comparison comparing this vertical BCRS, standard horizontal BCRSs, and a previous iteration …

Quantitative Analysis And Process Of High Speed Live Cell Interferometry Measurements, Daniel Guest

Theses and Dissertations

The application of auto focus, using an optical beam deflection technique, to existing live cell interferometry measurements was developed and examined. The benefit to relevant experiments, currently being performed, is shown as well as its performance across various magnifications. Enough information is given so that the system can be reproduced to fit any end users needs.

Humidity And Temperature Induced Changes In The Diffraction Efficiency And The Bragg Angle Of Slanted Photopolymer-Based Holographic Gratings, Tatsiana Mikulchyk, James Walshe, Dervil Cody, Suzanne Martin, Izabela Naydenova

Articles

This work explores the humidity and temperature response of volume phase slanted gratings recorded in photopolymers with varied chemical composition. Acrylamide and diacetone acrylamide were used as monomers and triethanolamine and N-phenylglycine were used as photoinitiators. The study demonstrates that the response of photopolymer-based holographic gratings to relative humidity (RH) and temperature (T) can be tuned by alteration of the photopolymer composition.Humidity and temperature response of the holograms has been characterized by recording Bragg selectivity curves of transmission gratings and by monitoring the position of the maximum intensity in the spectral response of reflection gratings. Investigation of the humidity response …

Bragg Gratings In Polarization Maintaining Optical Fiber As Three Dimensional Strain Sensor, Joel Quintana

Open Access Theses & Dissertations

Fiber-Bragg Gratings (FBG) for Structural Health Monitoring (SHM) have been studied extensively as they offer electrically passive operation, electromagnetic interference (EMI) immunity, high sensitivity and multiplexing as compared to conventional electric strain sensors. FBG sensors written within polarization maintaining (PM) optical fiber offer ad- ditional dimensions of strain measurement, greatly reducing the number of sensors needed to properly monitor a structure. This reduction however, adds complexity to the dis- crimination of the sensorâ??s optical response to its corresponding applied strains. This Dissertation defines the set of algorithms needed to measure planar strain using PM-FBGs exclusively. It defines the minimum number …

Light Soaking Phenomena In Organic-Inorganic Mixed Halide Perovskite Single Crystals, Hye Ryung Byun, Dae Young Park, Hye Min Oh, Gon Namkoong, Mun Seok Jeong

Electrical & Computer Engineering Faculty Publications

Recently, organic inorganic mixed halide perovskite (MAPbX₃; MA = CH₃NH₃^+, X = Cl^-, Br^-, or I^-) single crystals with low defect densities have been highlighted as candidate materials for high-efficiency photovoltaics and optoelectronics. Here we report the optical and structural investigations of mixed halide perovskite (MAPbBr_3-xI_x) single crystals. Mixed halide perovskite single crystals showed strong light soaking phenomena with light illumination conditions that were correlated to the trapping and detrapping events from defect sites. By systematic investigation with optical analysis, we found that the …

Quantum Inspired Symmetries In Laser Engineering, Mohammad Hosain Teimourpour

Dissertations, Master's Theses and Master's Reports

In this thesis, quantum inspired symmetries including Parity-Time (PT) symmetry and Supersymmetry (SUSY) have been studied in the context of non-Hermitian engineered laser systems. This thesis starts with a short review of semiconductor lasers theory in second chapter, followed by an introduction to quantum inspired symmetries: PT symmetry and SUSY in optics and photonics in chapter three.

In chapter four, we have studied the robustness and mode selectivity in PT symmetric lasers. We investigate two important aspects of PT symmetric photonic molecule lasers, namely the robustness of their single longitudinal mode operation against instabilities triggered by spectral hole burning effects, …

Generation Of Vector Partially Coherent Optical Sources Using Phase-Only Spatial Light Modulators, Milo W. Hyde Iv, Santasri Bose-Pillai, David G. Voelz, Xifeng Xiao

Faculty Publications

A simple and flexible optical system for generating electromagnetic or vector partially coherent sources or beams is presented. The alternative design controls field amplitude (beam shape), coherence, and polarization using only spatial light modulators. This improvement makes the apparatus simpler to construct and significantly increases the flexibility of vector partially coherent source generators by allowing many different types of sources to be produced without changing the physical setup. The system’s layout and theoretical foundations are thoroughly discussed. The utility and flexibility of the proposed system are demonstrated by producing a vector Schell-model and non-Schell-model source. The experimental results are compared …

Novel Concepts In Semiconductor Disk Lasers, Zhou Yang

Optical Science and Engineering ETDs

Optically-pumped semiconductor disk lasers (SDLs) have received much attention in recent years for a myriad of applications requiring intracavity access, good beam quality, wavelength versatility, and high output powers. The traditional scheme of these lasers feature a semiconductor distributed Bragg reflector (DBR) integrated with the active region, together forming an active mirror in an external free-space cavity. The active mirror component is fabricated by either epitaxial growth or post-growth processing. This places certain restrictions on SDL design, as material system choices become limited. It further viii hinders laser performance with regard to its thermal management and laser bandwidth (tuning range). …

Scatterometry Of 50 Nm Half Pitch Features, Ruichao Zhu

Optical Science and Engineering ETDs

Metrology technologies are an essential adjunct to Integrated Circuit (I.C.) Semiconductor manufacturing. Scatterometry, an optical metrology, was chosen to measure 50 nm half pitch feature structures. A bread-board scatterometry system has been assembled to provide a non-contact, non-destructive, accurate and flexible measurement. A real-time, on-line scatterometry system has also been demonstrated and proven to provide a high throughput measurement.

Three different types of samples have been measured using the scatterometry setup. The wire-grid polarizer (WGP) sample has been made by Jet and Flash Nanoimprint Lithography with ~100 nm pitch and ~50 nm wide ~200 nm tall Al gratings on fused …

Identity‐Based Schemes For A Secured Big Data And Cloud Ict Framework In Smart Grid System, Feng Ye, Yi Qian, Rose Qingyang Hu

Electrical and Computer Engineering Faculty Publications

Smart grid is an intelligent cyber physical system (CPS). The CPS generates a massive amount of data for efficient grid operation. In this paper, a big data‐driven, cloud‐based information and communication technology (ICT) framework for smart grid CPS is proposed. The proposed ICT framework deploys hybrid cloud servers to enhance scalability and reliability of smart grid communication infrastructure. Because the data in the ICT framework contains much privacy of customers and important data for automated controlling, the security of data transmission must be ensured. In order to secure the communications over the Internet in the system, identity‐based schemes are proposed …

Wave Propagation And Imaging In Structured Optical Media, Zun Huang

Open Access Dissertations

Structured optical media, usually characterized by periodic patterns of inhomogeneities in bulk materials, provide a new approach to ultimate control of wave propagation with possible practical applications: from distributed feedback lasers by diffraction gratings, to highly nonlinear performance for super-continuum generation, to fiber-optic telecommunications by microstructured photonic crystal fibers, to invisibility cloaking, to super-resolution imaging with metamaterials etc.

In particular, structured optical media allow to manipulate the wave propagation and dispersion. In this thesis, we focus on engineering the propagation phase dispersion by modulating the compositions and dimensions of the periodic elements. By tailoring the dispersion in momentum space, we …

Identity-Based Schemes For A Secured Big Data And Cloud Ict Framework In Smart Grid System, Feng Ye, Yi Qian, Rose Qingyang Hu

Electrical and Computer Engineering Faculty Publications

Smart grid is an intelligent cyber physical system (CPS). The CPS generates a massive amount of data for efficient grid operation. In this paper, a big data-driven, cloud-based information and communication technology (ICT) framework for smart grid CPS is proposed. The proposed ICT framework deploys hybrid cloud servers to enhance scalability and reliability of smart grid communication infrastructure. Because the data in the ICT framework contains much privacy of customers and important data for automated controlling, the security of data transmission must be ensured. In order to secure the communications over the Internet in the system, identity-based schemes are proposed …

Plasmonic Devices Based On Transparent Conducting Oxides For Near Infrared Applications, Kim Jongbum

Open Access Dissertations

In the past decade, there have been many breakthroughs in the field of plasmonics and nanophotonics that have enabled optical devices with unprecedented functionalities. Even though remarkable demonstration of at photonic devices has been reported, constituent materials are limited to the noble metals such as gold (Au) and silver (Ag) due to their abundance of free electrons which enable the support of plasmon resonances in the visible range. With the strong demand for extension of the optical range of plasmonic applications, it is now a necessity to explore and develop alternative materials which can overcome intrinsic issues of noble metals …

Dynamic Holography In Semiconductors And Biomedical Optics, Hao Sun

Open Access Dissertations

Three-dimensional scanning and display are rapidly-advancing new technologies with important commercial drivers such as 3D printing and remote imaging for big data applications. Holography is a natural approach to recording and displaying three-dimensional information because it uses phase-sensitive interferometry to record interference patterns when a reference beam encounters coherent light arriving from an object. The 3D information is contained in the values of wave optics. Holography is a broad field that goes beyond recording and displaying. For instance, holographic optical elements, which take advantage of holographic imaging principles, perform the functions of lenses, gratings or mirrors. Holographic interferometry is also …

Fabrication Of Infrared Photodetectors Utilizing Lead Selenide Nanocrystals, Justin Anthony Hill

Graduate Theses and Dissertations

Colloidal lead selenide and lead selenide / lead sulfide core/shell nanocrystals were grown using a wet chemical synthesis procedure. Absorbance and photoluminescence measurements were made to verify the quality of the produced nanocrystals. Absorbance spectra were measured at room temperature, while photoluminescence spectra were measured at 77 K. Organic ligands were exchanged for shorter ligands in order to increase the conductivity of the nanocrystals. Absorption and PL spectra for both core and core/shell nanocrystals were compared. Interdigital photodetector devices with varying channel widths were fabricated by depositing gold onto a glass substrate. Lead selenide nanocrystals were deposited onto these metallic …

Discord And Global Discord In Systems Of Coupled Quantum Dots In Driven Cavities With Dissipation, And A Method For The Calculation Of Global Discord, Willa Danielle Rawlinson

Graduate Theses and Dissertations

In the field of quantum information, which is subdivided into quantum computing and quantum cryptography, quantum correlations are essential for a performance or security boost not achievable with classical means. Various quantum correlation measures exist for evaluating a state’s potential to be a qubit (quantum bit). Entanglement, or nonseparability of quantum states, is the older, better known class of measures. However, for a mixed state, quantum entanglement is an incomplete measure of quantumness. Quantum discord, and its multibody extension global discord, encompass all quantum correlations. We study systems of coupled quantum dots using these measures.

We study the discord of …

Synthesis, Characterization, And Fabrication Of All Inorganic Quantum Dot Leds, Haider Baqer Salman

Graduate Theses and Dissertations

Quantum Dot LEDs with all inorganic materials are investigated in this thesis. The research was motivated by the potential disruptive technology of core shell quantum dots in lighting and display applications. These devices consisted of three main layers: hole transport layer (HTL), electron transport layer (ETL), and emissive layer where the emission of photons occurs. The latter part was formed of CdSe / ZnS core-shell quantum dots, which were synthesized following hot injection method. The ETL and the HTL were formed of zinc oxide nanocrystals and nickel oxide, respectively. Motivated by the low cost synthesis and deposition, NiO and ZnO …

Cavity Ringdown Spectroscopy In Nitrogen/Oxygen Mixtures In The Presence Of Alpha Radiation, Sidney John Gautrau

Master's Theses

This research was part of an effort to experimentally validate computational models under development for radiation-induced atmospheric effects. Cavity Ringdown Spectroscopy (CRDS) was used to measure the concentration of chemical products generated as a result of radiation interactions in a controlled atmosphere. Experiments were conducted in a vacuum chamber interfaced with a gas introduction system that controlled the initial atmospheric composition. A quadrupole mass spectrometer and tunable dye laser were integrated to confirm initial atmospheric composition, and provide wavelength flexibility for detecting a variety of chemical products generated by radiation interactions. CRDS measurements were made for ozone production resulting from …