Optics Commons^™

Optimisation Of Photosensitive Recording Materials For Broadband Holographic Optical Elements, Michael Murray

Doctoral

The introduction of broadband (white) LED outdoor lighting has led to significant energy savings. However, this has come at the cost of increased light pollution which has negative impacts both on ecological systems and human health. This light pollution is largely the result of the lack of control measures for the directionality of the light emitted by outdoor LED lighting. The lack of directionality also results in higher energy consumption in order to compensate for the light scattered to the atmosphere and sufficiently illuminate the target area. In this thesis holographic optical elements (HOEs) are proposed as a complementary technology …

Reflection Hoes Recorded On Photopolymerisable Glass Layers: A Step Towards Holographic Mirrors For Ar Technologies, David Ma, Suzanne Martin, Mohamed Oubaha, Tatsiana Mikulchyk

Conference Papers

Reflection Holographic Optical Elements (HOEs) offer a great potential for Augmented Reality (AR) display technologies due to their unique capability to redirect light with the predetermined wavelength in the opposite direction to the reconstructing light. AR displays based on HOEs enable a large variety of potential applications which necessitates the development of HOEs with long-term stable performance in challenging ambient conditions. Here, we present a study of the holographic recording capability of a photopolymerizable hybrid sol-gel (PHSG) which has shown to be a robust and water/temperature resistant material. Using optimal recording conditions, diffraction efficiency up to 18% has been achieved …

Investigation Of A Polymer-Based Holographic Grating For Visible Light Dosimetry Using A Bleachable Dye, Saoirse Maher, Denise Denning, Jackie Mccavana Dr., Seán Cournane Dr., Suzanne Martin Dr., Dervil Cody

Conference Papers

Holographic sensors are of interest for a range of sensing tasks because of their high sensitivity, rapid response time, broad dynamic range, lightweight characteristics, and design flexibility. The practical application of holography makes it possible to design optical sensors that are effective in the visible and near-infrared ranges. The objective of this research is to construct a holographic grating that is customised to provide quantitative data in visible light dosimetry applications. Upon exposure to visible light, the proposed holographic grating will produce a measurable change in diffraction efficiency based on the bleaching of the grating material. In the evolution of …

Modelling The Formation Of Unslanted Holographic Gratings In Hybrid Photopolymer Media, Jack Lyons, Dana Mackey, Izabela Naydenova

Articles

The theoretical modelling of holographic recording in photopolymers has been an important tool in their optimisation. More complex, hybrid organic/inorganic photopolymers have been developed in pursuit of materials with higher sensitivity, low shrinkage, high dynamic range and environmental stability. Recent attempts to augment the existing models for the redistribution of inorganic nanoparticles in holographic recording were successful but there is still a knowledge gap in regards to modelling optical losses, mutual cross-diffusion, the formation of slanted holographic gratings and polymerization induced shrinkage in hybrid photopolymer media. This paper will describe a novel approach to modelling the formation of unslanted holographic …

Comparing Thin And Volume Regimes Of Analog Holograms For Wavefront Sensing, Emma Branigan, Andreas Zepp, Suzanne Martin, Matthew Sheehan, Szymon Gladysz, Kevin Murphy

Articles

Two analog holographic wavefront sensors, for measurement of defocus, have been fabricated as both thin and volume phase transmission holograms in a self-developing photopolymer. This represents the first reported direct comparison of hologram regimes when designed for wavefront sensing. An analysis of the effect of crosstalk in the presence of one other aberration mode (astigmatism X (0/90°), coma X (horizontal), and primary spherical aberration) was carried out with each version of the sensor. The performance of thin and volume analog holographic wavefront sensors was characterized under emulated conditions associated with moderate atmospheric turbulence.

Thermal Effects On The Voc-Sensitive Polydimethylsiloxane Holographic Gratings, Aleksandra Hernik, Faolan Radford Mcgovern, Patrick Iftime, Izabela Naydenova

Conference Papers

The imperative for monitoring volatile organic compounds (VOCs) emerges from their harmful impact on human health when inhaled excessively over a long term. Polydimethylsiloxane (PDMS), valued for its transparency and excellent flexibility, has already been demonstrated as a promising biocompatible and cost-effective transducer for optical VOCs sensing. Moreover, it facilitates further functionalisation with adsorbing materials to enhance sensitivity and selectivity for specific VOCs detection. We fabricated and examined PDMS-based surface diffraction gratings after exposure to selected VOCs, demonstrating different response for polar and non-polar molecules. Investigated gratings were prepared by replicating sinusoidal surface relief structures inscribed in acrylamide photopolymer using …

Photopolymer Material Durability And Safety In Holographic Diffusers For Visual Applications, Matthew Hellis, Alan Casey, Edoardo Splendi, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Articles

This study introduces novel holographic diffuser applications employing acrylamide- or diacetone acrylamide-based photopolymers, patterned within the volume on a micron scale by a single-beam holographic recording process. These diffusers have previously been presented as potential treatments for amblyopia and diplopia. This work has now been extended to spectrometric analysis to determine their properties under broadband light. Diffusive elements with higher diffusion efficiencies exhibited a marginal reduction (< 5%) in diffusion efficiency across most of the visible spectrum. Given the intended application of these holographic diffusers, cytotoxicity assessments were also performed. This is significant as there is a difference in toxicity between the crystalline acrylamide (classified as a category 3 material) and diacetone acrylamide (classified as a category 4 material). The findings indicated substantially lower toxicity in holograms produced with diacetone acrylamide-based photopolymer. The accelerated ageing of both formulations of holographic diffusers indicated that the acrylamide-based holographic diffusers did not reduce efficacy in the 292 days of ageing. The diacetone acrylamide-based holographic diffusers exhibited reduced efficacy by day 182. Despite this, both formulations have been shown to perform for prolonged periods as the treatment modality would require. These results emphasise that holographic diffusers exhibit minimal spectral impact, and longevity on the scale of treatment regimes which are crucial considerations for their prospective use case as treatments for amblyopia and diplopia.

Holographic Multiplexing In A Photopolymerisable Hybrid Sol-Gel, Pamela Stoeva, Tatsiana Mikulchyk, Izabela Naydenova, Kevin Murphy

Articles

Holographic multiplexing techniques enhance functionality and information storage by leveraging the inherent selectivity of holograms. This is crucial for advancing holographic sensors, which excel in simultaneously detecting multiple parameters from a single input signal. This study explores the potential of the recent photopolymerisable hybrid sol-gel (PHSG) material for application in Space sensing systems through the investigation of its holographic angular multiplexing capabilities. For the first time, to the best of our knowledge, we report the successful recording of up to five angularly multiplexed gratings with diffraction efficiencies (DE) ≥ 15% in 187 ± 18 µm PHSG layers. A 3 mW/cm2 …

Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Maria Victoria Collados, Jesús Atencia, Suzanne Martin

Articles

Holographic optical elements (HOEs) have the potential to enable more compact, versatile, and lightweight optical designs, but many challenges remain. Volume HOEs have the advantage of high diffraction efficiency, but they present both chromatic selectivity and chromatic dispersion, which impact their use with wide spectrum light sources. Single-color light emitting diode (LED) sources have a narrow spectrum that reduces these issues and this makes them better suited for use with volume HOEs. However, the LED source size must be taken into consideration for compact volume HOE-LED systems. To investigate the design limits for compact HOE-LED systems, a theoretical and experimental …

Development Of An Optical Test Bed For The Fabrication And Characterisation Of An Analog Holographic Wavefront Sensor, Emma Branigan, Andreas Zepp, Suzanne Martin, Matthew Sheehan, Szymon Gladysz, Kevin Murphy

Conference Papers

A new holographic recording setup has been developed for the fabrication of single- and multi-mode photopolymer-based analog holographic wavefront sensors. A second setup has been built and used to characterise the sensor at several wavelengths.

Optical Characterisation Of Holographic Diffusers And Bangerter Foils For Treatment Of Amblyopia, Matthew Hellis, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Articles

Amblyopia is a significant issue for children worldwide, and current treatment methods have drawbacks that can hinder treatment effectiveness and/or patient experience. This study proposes a new treatment method using holographic diffusers while also comparing their optical characteristics to a current treatment method (Bangerter foils). Holographic diffusers were developed by optically patterning thin polymer layers on a micron scale. Two compositions of photopolymer (acrylamide and diacetone acrylamide based) are analysed herein. Characterisation shows that holographic diffusers of either composition can achieve a wide range of on-axis intensity reductions, allowing for precise and customisable treatment levels by altering recording exposure time …

Modelling Hoe Performance With An Extended Source; Experimental Investigation Using Misaligned Point Sources, Jorge Lasarte, Kevin Murphy, Izabela Naydenova, Jesús Atencia, Mª Victoria Collados, Suzanne Martin

Conference Papers

Holographic Optical Elements (HOEs) have the potential to enable more compact, versatile and lightweight optical designs, but many challenges remain. Volume HOE’s have the advantage of high diffraction efficiency but they present both chromatic selectivity and chromatic dispersion which impact on their use with wide spectrum light sources. Single-colour LED sources have a narrow spectrum that reduces these issues and this makes them better suited for use with volume HOEs. However, the LED source size must be taken into consideration for compact volume HOE-LED systems. To investigate the design limits for compact HOE-LED systems, a theoretical and experimental study was …

Design And Fabrication Of Volume Holographic Optical Couplers For A Range Of Non-Normal Incidence Angles, Dipanjan Chakraborty, Rosen Georgiev, Sinead Aspell, Izabela Naydenova, Suzanne Martin

Conference Papers

A theoretical model has previously been developed to calculate the holographic recording beam angles required in air (at any recording wavelength) to produce a Volume Holographic Optical Element (VHOE) for operation as a coupler for different input and output angles. In this paper, the experimental study is extended to further validate the VHOE coupler design and fabrication approach for additional incident beam angles, comparing -40° -45° and -50° (in air). The output angle for each VHOE is +45° within the medium and the coupler operational wavelength is 633nm. Holographic recording in Bayfol HX 200 photopolymer at 532nm is used to …

Fabrication And Characterisation Of Large Area, Uniform And Controllable Surface Relief Patterns In Photopolymer Material, Owen Kearney, Izabela Naydenova

Conference Papers

As the risk of antibiotic resistant pathogens increases, development of convenient point of care devices is essential. Such devices would help avoid infection – ensure cleanliness of environments and assist in bacteria analysis. The ultimate aim of the research presented here is to develop a compact, cost effective, easy to use optical device which is capable of detecting and quantifying bacteria in an aqueous sample. The surface relief patterns have a dual role, they provide a diffracted light signal, and control the adhesion of the bacteria to the surface. The strength of the diffracted signal is expected to provide a …

Color-Changing Reflection Hologram For Quality Assurance Of Therapeutic Ultrasound Systems, Tatsiana Mikulchyk, John Walsh, Jacinta Browne, Izabela Naydenova, Dervil Cody

Articles

The acoustic output of clinical therapeutic ultrasound equipment requires regular quality assurance (QA) testing to ensure the safety and efficacy of the treatment and that any potentially harmful deviations from the expected output power density are detected as soon as possible. A hologram, consisting of a reflection grating fabricated in an acrylate photopolymer film, has been developed to produce an immediate, visible, and permanent change in the color of the reconstructed hologram from red to green in response to incident ultrasound energy. The influence of the therapeutic ultrasound insonation parameters (exposure time, ultrasound power density, and proximity to the point …

Oil Particle Analysis Using Machine Learning And Holography Imaging, Daniel Cruz

Open Access Theses & Dissertations

Holographic cameras show potential as a sensor to monitor oil spills. Holographic cameras record the light interference from particles in a volume of space, producing an image called a hologram. Processing these holograms is known as hologram reconstruction. It produces a representation of particles located in three-dimensional space. These cameras can record precise shapes and sizes of particles in a volume of water. However, it is very time-consuming and resource-intensive to process the images. Most algorithms that perform particle analysis require the hologram reconstruction step. The well-documented hybrid method is one such algorithm. Machine learning is one possible technique that …

Modelling Spherical Aberration Detection In An Analog Holographic Wavefront Sensor, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Conference Papers

The analog holographic wavefront sensor (AHWFS) is a simple and robust solution to wavefront sensing in turbulent environments. Here, the ability of a photopolymer based AHWFS to detect refractively generated spherical aberration is modelled and verified.

Dynamic Holography In Resonant Nonlinear Media: Theory And Application, Jonathan E. Slagle

Theses and Dissertations

Two beam coupling (TBC) is a coherent interaction in which energy is transferred from one laser beam to another and has promising applications in real-time holography and coherent beam combing. We have recently shown efficient degenerate frequency TBC for counter-propagation geometries in isotropic two-photon absorbing media pumped with a nanosecond pulsed laser. When an interference pattern is generated in this media, single and two photon absorption initiates a population redistribution resulting in a holographic grating with the same modulation period and phase initially. However, due to temporal convolution of self- and cross-phase modulation, the grating will begin to shift in …

Direct Multiplexing Of Low Order Aberration Modes In A Photopolymerbased Holographic Element For Analog Holographic Wavefront Sensing, Emma Branigan, Suzanne Martin, Matthew Sheehan, Kevin Murphy

Conference Papers

The fabrication of an analog holographic wavefront sensor, capable of detecting the low order defocus aberration, was achieved in an acrylamide-based photopolymer. While other implementations of holographic wavefront sensors have been carried out digitally, this process utilises a recording setup consisting only of conventional refractive elements so the cost and complexity of holographic optical element (HOE) production could be much reduced. A pair of diffraction spots, corresponding to a maximum and minimum amount of defocus, were spatially separated in the detector plane by multiplexing two HOEs with different carrier spatial frequencies. For each wavefront with a known aberration that was …

Structuring Light For Investigating Optical Vortices, Andrew Voitiv, Mark Siemens

DU Undergraduate Research Journal Archive

Vortices are well known in our world: tornadoes, hurricanes, and quickly stirred iced tea all demonstrate the vortex phenomenon. In addition to these classical fluids, vortices exist in laser light. While classical fluid vortex dynamics is one of the oldest studied physics problems, the study of optical vortices is only a few decades old. Paralleling the community’s curiosity of quantized vortices in quantum fluids, such as super fluid helium and Bose-Einstein condensate, there is immense interest in the study of optical vortices. In this article, we cover the basic theory of structuring light to generate optical vortices and then discuss …

Holographic Security, Vincent Toal

Books/Book Chapters

This chapter is concerned with the security applications of holographic techniques. Holograms are used in product authentication, product branding and brand protection, and personal and other documents. Serialization to ensure the uniqueness of each hologram for added security is briefly discussed. The theory of optical character recognition and joint transform correlation methods is outlined. Holographic recording using encrypted reference waves enables secure storage of information. Several methods are considered for encrypting optical data as well as holographic recording of encrypted images and their reconstruction and decryption. Millimeter and microwave holographic imaging techniques for the detection of hidden contraband, narcotics, firearms, …

Optimisation Of The Performance Of Holographic Beam-Shaping Diffractive Diffusers Through Refinement Of The Recording Process, Cara Jones, Suzanne Martin, Sanjay Keshri, Dervil Cody, Kevin Murphy

Conference Papers

Optical diffusers have uses in laser applications and machine vision. Typical fabrication at a commercial level requires master production and the stamping/copying of individual elements at scale. This expensive, indirect process inhibits custom diffusers at reasonable cost. Previously the authors published a novel, direct, single beam method of recording customizable and controllable volume holographic diffusers by manipulating laser speckle and recording the pattern in photopolymer. This method allows for beam-shaping to produce diffusion patterns of various sizes and shapes. In this work, the direct method of recording controllable holographic diffusers is refined to improve diffuser performance (i.e., a decrease in …

Measuring And Utilizing High-Dimensional Information Of Optical Fields, Ziyi Zhu

USF Tampa Graduate Theses and Dissertations

Currently, many areas of optical techniques including imaging, inspection and communication emphasize the utilization of the high-dimensional information encoded in optical fields. There is also a requirement for novel measurement techniques to extract this high-dimensional information with high-speed and accuracy. We firstly introduce a scan-free direct measurement technique that is capable of simultaneously characterizing the amplitude and phase of a coherent scalar optical field. Our direct measurement approach is constituted of a weak polarization perturbation which is followed by the recording of a polarization-resolving imaging process. The weak perturbation rotates the linear polarization on the spatial frequency domain of the …

Study Of The Effect Of Magnetic Nanoparticles On The Hologram Recording Capability Of Photopolymer Nanocomposite For Development Of Holographic Sensor/Actuator, Muhammad Irfan, Suzanne Martin, Izabela Naydenova

Conference Papers

Photopolymer nanocomposite materials utilising nanoparticles of varied refractive index are one of the most attractive materials for holography due to their tuneable properties. The preparation of the photopolymer nanocomposites can involve mixing a stable colloidal suspension in the photopolymer solution or printing of the nanoparticle colloidal suspension on top of a dried photopolymer layer. By following the first approach in this study a novel photopolymer nanocomposite material is prepared for holographic recording. It consists of N-isopropylacrylamide (NIPA)-based photopolymer as a host and iron oxide magnetic nanoparticles as nanodopant. The methodology of the photopolymer nanocomposite material preparation is explained in detail. …

Development Of Photopolymer Material With Improved Dynamic Range And Sensitivity, Brian Rogers, Izabela Naydenova, Suzanne Martin

Conference Papers

In this study the effect of the concentration of acrylamide and the influence of different initiators in a photopolymer composition for holographic recording of diffraction gratings is investigated. Light manipulating Holographic Optical Elements (HOEs) have a number of characteristics which can be optimised for different roles. However, at the core of these devices is the refractive index modulation that has been created in the material during recording. Typically higher refractive index modulation will enable greater diffraction efficiency. Solar concentrating HOEs can particularly benefit from material that experiences higher refractive index modulation. For a solar concentrator to have a high acceptance …

Developing Wavefront Shaping Techniques For Focusing Through Highly Dynamic Scattering Media, Ashton Hemphill

McKelvey School of Engineering Graduate Student Theses & Dissertations

One of the prime limiting factors of optical imaging in biological applications is the diffusion of light by tissue, which prevents focusing at depths greater than the optical diffusion limit of ~1 mm in soft tissue. This greatly restricts the utility of optical diagnostic and therapeutic techniques, such as optogenetics, microsurgery, optical tweezing, and phototherapy of deep tissue, which require focused light in order to function. Wavefront shaping extends the depth at which optical focusing may be achieved by compensating for phase distortions induced by scattering, allowing for focusing through constructive interference.

However, due to physiological motion, scattering of light …

Holographic Beam-Shaping Diffractive Diffusers Fabricated By Using Controlled Laser Speckle, Kevin Murphy, Vincent Toal, Izabela Naydenova, Suzanne Martin

Articles

A method for fabricating diffractive holographic optical diffusers is reported, allowing a high degree of control of the resulting diffuser characteristics. The method consists of recording a laser speckle pattern using a single carrier beam, with controlled speckle size and shape, in an acrylamide-based volume photopolymer. The multiple interferences that create the speckle pattern form the hologram. Results are presented verifying the diffusers are volume holographic in nature and the speckle pattern is recorded accurately in the photopolymer. Diffusers recorded by this method are analysed to characterise the optical performance of the diffusers and to illustrate their beam-shaping capabilities, particularly …

Effect Of Monomer Diffusion On Photoinduced Shrinkage In Photopolymer Layers Determined By Electronic Speckle Pattern Interferometry, Mohesh Moothanchery, Manojit Pramanik, Vincent Toal, Izabela Naydenova

Conference Papers

The aim of this study is to determine the effect of monomer diffusion on the photoinduced shrinkage profile in acrylamide based photopolymer layers during holographic recording. Using phase shifting electronic speckle pattern interferometry the displacement at each pixel in the image of the layer is measured. The complete displacement profile of the layer was obtained using phase shifting technique. We observed a reduction in shrinkage as a result of monomer diffusion from unexposed regions of holographic exposure. As a result of diffusion the maximum shrinkage was reduced by 26 % from 7.18μm to 5.28μm in a photopolymer layer of thickness160 …

N-Isopropylacrylamide-Based Photopolymer For Holographic Recording Of Thermosensitive Transmission And Reflection Grating, Tatsiana Mikulchyk, Suzanne Martin, Izabela Naydenova

Articles

In recent years, functionalized photopolymer systems capable of holographic recording are in great demand due to their potential use in the development of holographic sensors. This work presents a newly developed Nisopropylacrylamide(NIPA)-based photopolymer for holographic recording in reflection and transmission modes. The optimized composition of the material is found to reach refractive index modulation of up to 5  10-3 and 1.6  10-3 after recording in transmission and reflection mode, respectively. In addition to fulfilling the requirements for holographic recording materials, the NIPA-based photopolymer is sensitive to temperature and has lower toxicity than acrylamide-based photopolymers. Possible application of the …

Quantitative Measurement Of Displacement In Photopolymer Layers During Holographic Recording Using Phase Shifting Electronic Speckle Pattern Interferometry, Mohesh Moothanchery, Viswanath Bavigadda, Paul Kumar Upputturi, Manojit Pramanik, Vincent Toal, Izabela Naydenova

Conference Papers

The aim of this study is to determine the displacement profile due to shrinkage in acrylamide-based photopolymer layer during holographic recording. Using phase shifting electronic speckle pattern interferometry the displacement at each pixel in the image of the object is measured by phase shifting technique so that a complete displacement profile of the object can be obtained. It was observed that the displacement profile is Gaussian and resembles to the profile of the recording beam. We observed an increase in shrinkage from 2 μm at 20 seconds of recording to 7.5 μm after 120 seconds of recording. The technique allows …