Optics Commons^™

Modeling Kinetics Of 5-Aminolevulinic Acid-Induced Protoporphyrin Ix Accumulation For Optimal Photodynamic Therapy, Priscilla Melebor

Graduate Masters Theses

Photodynamic therapy (PDT) is a minimally invasive treatment that uses light-activated photosensitizers to selectively destroy diseased tissue through the generation of reactive oxygen species. However, conventional in vitro models often fail to accurately reproduce the pharmacokinetics of photosensitizer accumulation and clearance observed in vivo. This study investigated protoporphyrin IX (PpIX) accumulation following 5-aminolevulinic acid (ALA) exposure under physiologically relevant conditions using two-dimensional (2D) monolayers and three-dimensional (3D) spheroids. By comparing continuous ALA exposure with transient exposure followed by ALA washout, this work provides a more biologically relevant framework for studying PpIX kinetics and optimizing photodynamic therapy.

Investigation Of Laser Based Flow Diagnostics With Metastable Argon, Sterling S. Gordon

Physics Theses & Dissertations

The overarching motivation of this work is the development of seedless, non-intrusive, laser-based diagnostics for supersonic airflow in wind tunnels. To advance this goal, this dissertation fo-cuses on three-photon excitation in a research-grade argon beam within a tabletop vacuum system, which offers a controlled environment for testing and refining the approach. The chosen excitation scheme drives argon atoms to the 3d[5/2]₃ state using a pulsed Ti:Sapphire laser system, enabling time-of-flight (ToF) measurements on atoms that subsequently undergo a multi-step decay to the metastable 4s[3/2]₂ state. Although full realization of this excitation scheme was hindered by technical …

Enhanced Point Cloud Generation From A Novel 360° Underwater Lidar, Olagoke E. Daramola

Dissertations

This dissertation presents novel algorithms to improve the mapping capabilities of a 360-degree underwater Pulsed Laser Line Scanner LiDAR (PLLS-360°). Due to its 360° field-of-view (FOV), the PLLS-360° is a compact full-waveform omnidirectional imager suitable for seafloor mapping, underwater asset inspection, object detection, ice-sheet mapping, and construction progress monitoring. The proposed methodology includes an improved waveform fitting technique for saturated waveform recovery, detection array response correction, radiometric corrections, and fusion of LiDAR and sonar bathymetric datasets. The first part of this dissertation assesses the LiDAR’s performance and describes how the data for this unique 360° FOV architecture is processed. The …

Growth, Cladding, And Characterization Of Single Crystal Optical Fiber: The Next Evolution In Directed Energy Systems, Allen Benton

All Dissertations

High-power fiber lasers are steadily increasing in maximum power and rapidly approaching theoretical maximum power output from a single fiber aperture. The low thermal conductivity of silica fibers is an inherent limitation to the dissipation of heat from the fiber core, and the buildup of heat within the laser gain media is the principal driver of transverse mode instability within fiber systems. This limitation necessitates the exploration of alternate fiber host materials. Due to their high thermal conductivity, excellent transmission range, ability to host most of the optically active rare earth ions, and success as bulk laser materials, single-crystalline YAG …

Investigation Of Optically Pumped Gesn Quantum Well Lasers, Grey Steven Abernathy

Graduate Theses and Dissertations

Silicon photonic integrated circuits enable the capability of producing on-chip processing of photonic signals, including both emission and detection. Emission materials, however, have been limited for monolithic integration due to high processing temperatures, indirect bandgap materials, and material integration complications. The (Si)GeSn material system has recently attracted attention due to the bandgap transition from the Si and Ge, naturally indirect bandgap, to direct bandgap with sufficient Sn incorporation. Additionally, the low growth temperature (CMOS compatible; <400 >°C) of (Si)GeSn materials can enable the monolithic integration of the highly desired mid-infrared light emission on the Si Photonic platform. This dissertation first discusses …

Development Of A High-Resolution Mid-Infrared Spectroscopy Apparatus For The Study Of Methane And Other Astrochemical Molecules., S M Shah Riyadh

Electronic Theses and Dissertations

This research documents steps towards building a novel spectroscopic technique, namely, cavity-enhanced double-resonance (CEDR) spectroscopy, for investigating methane (CH₄) and other molecules with significance in astrochemistry. These efforts focus on tackling the complexities of their ro-vibrational energy levels and the inefficiencies in analyzing vibrational spectra, particularly for molecules with high symmetry and strong intramolecular interactions. In the CEDR spectroscopy, the first photon, generated by a continuous-wave optical parametric oscillator (CW-OPO) locked to a Doppler-free saturation absorption line, excites the molecule from its ground level to a selected excited ro-vibrational (rotational-vibrational) level, e.g., that of the asymmetric CH-stretch mode. …

Optical Seed Development For Yb-Fiber Laser, James G. Brutus

Graduate Thesis and Dissertation 2023-2024

Master Oscillator Power Amplifiers (MOPA) are laser systems that utilize a seed and pump amplification system to boost the output power of high-quality lower power seeding signals. MOPAs can generate high gain while avoiding many of the nonlinearities that negatively affect resonance-based lasers that are known to feature higher internal intensities. Additionally, MOPAs provide an easy alternative to the construction of novel laser technologies for higher output power as they can be easily combined with existing laser sources to amplify their output power.

This thesis outlines the design of an ytterbium-doped fiber laser (YDFL), featuring a MOPA architecture. The YDFL …

Measuring The Pulse Duration Of A Femtosecond Laser Using Intensity Autocorrelation, Ross N. Relic

Macalester Journal of Physics and Astronomy

In this experiment, an intensity autocorrelator is set up in order to measure the pulse duration of a passively mode-locked Titanium-Sapphire laser with a power of 267mW producing femtosecond pulses. Then this measurement, as well as a measurement of the laser’s spectrum, is used to test the Uncertainty Principle. Intensity autocorrelation is a well-established technique for measuring pulse duration, and is among the more intuitive techniques for this purpose, which is why it was selected for this experiment. The experimental setup was computerized. The delay of one half of the pulse was controlled by a motorized translation stage which was …

Filaments And Their Application To Air Lasing, Spectroscopy, And Guided Discharge, Ali Rastegari

Optical Science and Engineering ETDs

Laser filamentation is a fascinating phenomenon that occurs when an intense laser beam travels through transparent materials, in particular air. At sufficiently high power (TW in the near IR, GW in the UV), instead of spreading out like a regular laser beam, something remarkable happens: the laser beam becomes tightly focused, creating a thin and intense column of light called a laser filament. Laser filamentation is characterized by two main properties: (I) a high-intensity core that remains narrow over long distances beyond the Rayleigh range and (II) a low-density plasma channel within the core. In recent years, laser filamentation has …

Photonic Monitoring Of Atmospheric Fauna, Adrien P. Genoud

Dissertations

Insects play a quintessential role in the Earth’s ecosystems and their recent decline in abundance and diversity is alarming. Monitoring their population is paramount to understand the causes of their decline, as well as to guide and evaluate the efficiency of conservation policies. Monitoring populations of flying insects is generally done using physical traps, but this method requires long and expensive laboratory analysis where each insect must be identified by qualified personnel. Lack of reliable data on insect populations is now considered a significant issue in the field of entomology, often referred to as a “data crisis” in the field. …

Investigation Of Laser And Nonlinear Properties Of Anderson Localizing Optical Fibers, Cody Ryan Bassett

Optical Science and Engineering ETDs

In this dissertation, I investigate the possibility of lasing and nonlinear phenomena in completely solid-state transverse Anderson localizing optical fibers (TALOFs). I examine three areas within this range of topics. The research in nonlinear phenomena focuses on four-wave mixing (FWM). FWM is of high interest in TALOFs due to the fact that guided localized modes of the fiber each have different propagation constants, and thus unique possible FWM pairs can be generated from the same input pump beam. I demonstrate the generation of FWM in the TALOF by pumping it with 532 nm light into a localized mode and observing …

Mutual Interaction Induced Multi-Particle Physics In Qed Systems – Cooperative Spontaneous Emission And Photonic Dimer Enhanced Two-Photon Excitation, Yao Zhou

McKelvey School of Engineering Graduate Student Theses & Dissertations

In recent years, the study of quantum electrodynamics (QED) in light-matter interactions has discovered various interesting phenomenons that orient many applications. However, due to the ambient entanglement among photons and atoms, few-particle dynamics remains challenging to analyze precisely and limits the progress in several fields. In few-particle systems, different number of atoms interacting with the light field generates drastically different results, even when there is only a single photon involved in the system. The interference between individual atom’s spontaneous emission wavefunctions can cooperatively alter the effective atom-light coupling strength. Depending on the spatial distance between individual of atoms and the …

Tailored Frequency Comb Structures And Their Sensing Applications, James Hendrie

Optical Science and Engineering ETDs

The focus of this dissertation is the development and investigation of nested cavity mode-locked lasers and their resultant tailored frequency combs. A nested cavity is made up of two cavities, known as parents. One parent is a larger, active, 100MHz Ti:Saph oscillator and the other is a smaller, passive, 7GHz Fabry-Perot Etalon (FPE). Unlike standard frequency combs that are continuous, a tailored comb’s teeth are distributed in equally spaced groups where the center of each group corresponds to the resonance of the FPE and the side bands are determined by the resonances of the Ti:Saph. This unique coupling of the …

Optical Response Analysis Of Thz Photoconductive Antenna Using Comsol Multiphysics, Jose Isaac Santos Batista

Electrical Engineering Undergraduate Honors Theses

A THz photoconductive antenna consists of antenna pads laid over a photoconductive substrate. These types of antennas are excited through the application of an optical pump (laser), which generates carriers inside the semiconductor. The acceleration and recombination of these carriers produce photocurrent that excites the antenna and generates THz pulse. This thesis focuses on analyzing the optical response of a photoconductive antenna, which consist of the interaction of the incident electric field of a laser pump with the radiating device. It develops the amplitude modulation process of a plane wave of light into a laser pump. It also takes into …

Study Of Blinking Statistics In Silver Coated Cobalt Ferrite Single Nanoprticle Using Two-Photon Fluorescence Microscopy, Rajen Kumar Goutam

Open Access Theses & Dissertations

Two-photon fluorescence microscopy is a powerful tool to study the molecular and cellular interactions. This technology is a non-invasive approach with the advantage of three-dimensional imaging up to submicron resolution. Two-photon excitation process is the result of simultaneous absorption of two photons that has special features of reduced photodamaged and elongated penetration depth on samples. In this work, blinking statistics of silver-coated Cobalt ferrite (CoFe2O4) single nanocrystal is studied using two-photon fluorescence microscopy. By defining the intensity threshold, the observed fluorescence is divided into two distinct stages: OFF and ON states. Both of these states followed the inverse power law. …

A Confocal Fabry Perot Etalon For Laser Frequency Analysis, Theodore Arsenault

Physics Student Scholarship

No abstract provided.

Development Of A Compact Broadband Optical Parametric Oscillator For Ultra-Sensitive Molecular Detection, Sean O. Crystal

Honors Undergraduate Theses

Every gas molecule has a unique absorption spectrum that can be captured using optical spectroscopy to identify an unknown sample's composition. Frequency combs systems can provide an extremely broad mid-infrared spectrum that is very useful for molecular detection. A degenerate optical parametric oscillator (OPO) was built to generate the down-converted and shifted frequency comb spectrum. This system utilizes an ultra-short pulse 1.56µm pump laser and a never before used orientation patterned gallium-phosphide crystal. Periodically polled lithium niobate (PPLN), Gallium Arsenide (GaAs) and Gallium Phosphide are all crystals used to accomplish this task. GaP, in comparison to PPLN, has (i) a …

Cavity Ringdown Spectroscopy In Nitrogen/Oxygen Mixtures In The Presence Of Alpha Radiation, Sidney John Gautrau

Master's Theses

This research was part of an effort to experimentally validate computational models under development for radiation-induced atmospheric effects. Cavity Ringdown Spectroscopy (CRDS) was used to measure the concentration of chemical products generated as a result of radiation interactions in a controlled atmosphere. Experiments were conducted in a vacuum chamber interfaced with a gas introduction system that controlled the initial atmospheric composition. A quadrupole mass spectrometer and tunable dye laser were integrated to confirm initial atmospheric composition, and provide wavelength flexibility for detecting a variety of chemical products generated by radiation interactions. CRDS measurements were made for ozone production resulting from …

Transmission Of Focused Picosecond Light Pulse Through Multimode Fibers, Yin Cen

Dissertations, Theses, and Capstone Projects

This thesis focuses on a technique of delivering spatially focused and temporally compressed picosecond laser pulses through multimode fibers. This study was inspired by recent success in focusing light through optically diffusive media of which multimode fibers were a special case in terms of causing scrambled phase distribution in the transmitted light. The approach involved controlling the phase distribution of incoming beam using a deformable mirror prior to its entry into the multimode fiber in order to achieve constructive interference at selected spots in the output. With phase control, the intensity of the focused light at the output can be …

Shielded Radiography With A Laser-Driven Mev-Energy X-Ray Source, Shouyuan Chen, Grigory V. Golovin, Cameron Miller, Daniel Haden, Sudeep Banerjee, Ping Zhang, Cheng Liu, Jun Zhang, Baozhen Zhao, Shaun Clarke, Sara Pozzi, Donald Umstadter

Donald Umstadter Publications

We report the results of experimental and numerical-simulation studies of shielded radiography using narrowband MeVenergy X-rays from a compact all-laser-driven inverse-Compton-scattering X-ray light source. This recently developed Xray light source is based on a laser-wakefield accelerator with ultra-high-field gradient (GeV/cm). We demonstrate experimentally high-quality radiographic imaging (image contrast of 0.4 and signal-to-noise ratio of 2:1) of a target composed of 8-mm thick depleted uranium shielded by 80-mm thick steel, using a 6-MeV X-ray beam with a spread of 45% (FWHM) and 107 photons in a single shot. The corresponding dose of the X-ray pulse measured in front of the target …

Coherent Beam Combining Of Ultrashort Laser Pulses, Ahmad Azim

Honors Undergraduate Theses

Ultrashort pulsed lasers have become critical to understanding light-matter interactions in new regimes such as generation of attosecond pulses, laser filamentation, and intense relativistic processes. Development of more powerful and energetic ultrafast lasers is required for advancing these fields of study. Several petawatt class systems now exist with more in development to further scale peak power and extend the frontier of ultrafast laser technology. Another relevant solution to the scaling of energy and power of ultrashort pulses is coherent beam combining (CBC). CBC is useful for not only scaling of laser parameters but also to mitigate parasitic nonlinear processes associated …

Increasing The Sensitivity Of The Michelson Interferometer Through Multiple Reflection, Woonghee Youn

Graduate Theses - Physics and Optical Engineering

Michelson interferometry has been one of the most famous and popular optical interference system for analyzing optical components and measuring optical metrology properties. Typical Michelson interferometer can measure object displacement with wavefront shapes to one half of the laser wavelength. As testing components and devices size reduce to micro and nano dimension, Michelson interferometer sensitivity is not suitable. The purpose of this study is to design and develop the Michelson interferometer using the concept of multiple reflections. This thesis proposes a new and novel design for a multiple reflection interferometer, where the number of reflections does not affect the quality …

Mathematical Model: Comparative Study Of Thermal Effects Of Laser In Corneal Refractive Surgeries, Gokul Kc, Dil B. Gurung, Pushpa R. Adhikary

Applications and Applied Mathematics: An International Journal (AAM)

Lasers have been widely used in ophthalmology. Refractive errors are some of the most common ophthalmic abnormalities worldwide. Laser refractive surgery was developed to correct refractive errors myopia, hyperopia and astigmatism. Two types of laser surgical techniques: lamellar and thermal are available to reshape the corneal curvature. Ultraviolet (UV) emitting argon fluoride (ArF) excimer laser is used to sculpt cornea in lamellar procedures, whereas, infrared (IR) emitting holmium yttrium aluminum garnet (Ho: YAG) laser is used to shrink cornea in thermal procedure. Tissue heating is common in all types of laser surgical techniques. Hence, in this paper, a finite element …

Construction And Optimization Of A Tapered Amplifier System For Applications In Ultra-Cold Plasma Research, Ryan Cole

Honors Theses

The number density of cold atoms confined in a magneto-optical trap (MOT) is critically dependent on the intensity of the lasers used to cool the sample. To generate large optical powers while retaining the practicality of homemade external cavity diode lasers (ECDLs), a tapered amplifier (TA) system was designed and constructed to amplify the output of an existing 780 nm, continuous-wave ECDL. The amplifier’s performance is discussed in terms of its gain and power output. Under standard operating conditions, optical amplification of 12 dB is achieved, with a maximum power output of 0.75 W. The completed amplifier is installed into …

The Talbot Effect, Malia Kawamura

Honors Theses

The goal of this project is to experimentally investigate the optical Talbot effect and the electron Talbot effect. The Talbot effect is a near-field diffraction effect which occurs when plane waves are incident upon a grating. The Talbot effect creates full grating revivals at integral Talbot lengths and revivals with greater spatial periodicity at fractional Talbot lengths. We use a green helium neon laser and Ronchi rulings to take CCD camera images of the fractional Talbot revivals directly. Additionally, a photodiode records light intensity as a function of time as a second identical grating is moved to verify the presence …

Forcing Mutual Coherence In Diode Laser Stacks, Jonathan R. Wurtz

Honors Theses and Capstones

This paper will discuss both theoretical and experimental attempts to improve the spatial beam quality of diode laser stacks using an external optical system. An overview and derivation of the mathematics of both the optical system and diode lasers will be discussed. The experimental setup will be presented, as well as the fundamental theoretical and experimental results that suggest the external optical system used for this thesis fails to improve the beam quality of a diode laser stack.

Integration Of Instrumentation And Processing Software Of A Laser Speckle Contrast Imaging System, Jacob James Carrick

Dissertations, Master's Theses and Master's Reports - Open

Laser speckle contrast imaging (LSCI) has the potential to be a powerful tool in medicine, but more research in the field is required so it can be used properly. To help in the progression of Michigan Tech's research in the field, a graphical user interface (GUI) was designed in Matlab to control the instrumentation of the experiments as well as process the raw speckle images into contrast images while they are being acquired. The design of the system was successful and is currently being used by Michigan Tech's Biomedical Engineering department. This thesis describes the development of the LSCI GUI …

Properties Of High Energy Laser Light Transmission Through Large Core Optical Cables, Christopher Kennedy

Electronic Theses and Dissertations

Laser induced damage is of interest in studying the transmission of large amounts of optical energy through step-index, large core multimode fibers. Optical fibers often have to be routed around objects when laser light is being transmitted between two locations which require the fiber to bend into a curve. Depending on how tight the bend is, this can result in transmission losses or even catastrophic damage when the energy density of the laser pulse exceeds the damage threshold of silica glass. The purpose of this study is to: Establish a minimum bend radius that would allow high energy (GW/cm2 ) …

Commissioning Of The Asta Laser Lab With Uv Pulse Length Characterization, Daniel Kelley, Jeff Corbett

STAR Program Research Presentations

The Linac Coherent Light Source (LCLS) at SLAC depends on a photocathode electron gun to provide the linear accelerator with the raw material – electrons – used for making X-ray laser pulses. The photocathode used in the LCLS Injector is a clean copper plate in high vacuum. When the cathode is struck with high energy UV light, electrons are liberated from its surface and then accelerated down the linac with radio-frequency electric fields. These fast-moving bunches of electrons are directed through an undulator magnet to radiate X-ray light.

Although scientists have been using photocathode techniques at SLAC for 25 years, …

Building And Characterization Of Laser Diodes As Well As System Design Of A Dual Wavelength Fabry-Perot Interferometer, Nicholas Czapla

Physics

No abstract provided.