Optics Commons^™

Demonstration Of Visible And Near Infrared Raman Spectrometers And Improved Matched Filter Model For Analysis Of Combined Raman Signals, Alexander Matthew Atkinson

Electrical & Computer Engineering Theses & Dissertations

Raman spectroscopy is a powerful analysis technique that has found applications in fields such as analytical chemistry, planetary sciences, and medical diagnostics. Recent studies have shown that analysis of Raman spectral profiles can be greatly assisted by use of computational models with achievements including high accuracy pure sample classification with imbalanced data sets and detection of ideal sample deviations for pharmaceutical quality control. The adoption of automated methods is a necessary step in streamlining the analysis process as Raman hardware becomes more advanced. Due to limits in the architectures of current machine learning based Raman classification models, transfer from pure …

Ionizing Radiation Detection Using Microstructured Optical Fiber, Stanton Dehaven

Electrical & Computer Engineering Theses & Dissertations

Ionizing radiation detecting microstructured optical fibers are fabricated, modeled and experimentally measured for X-ray detection in the 10-40 keV energy range. These fibers operate by containing a scintillator material which emits visible light when exposed to ionizing radiation. An X-ray source characterized with a CdTe spectrometer is used to quantify the X-ray detection efficiency of the fibers. The solid state CdTe detector is considered 100% efficient in this energy range. A liquid filled microstructured optical fiber (MOF) is presented where numerical analysis and experimental observation leads to a geometric theory of photon transmission using total internal reflection. The model relates …

Optimization Framework For A Radio Frequency Gun Based Injector, Alicia S. Hofler

Electrical & Computer Engineering Theses & Dissertations

Linear accelerator based light sources are used to produce coherent x-ray beams with unprecedented peak intensity. In these devices, the key parameters of the photon beam such as brilliance and coherence are directly dependent on the electron beam parameters. This leads to stringent beam quality requirements for the electron beam source. Radio frequency (RF) guns are used in such light sources since they accelerate electrons to relativistic energies over a very short distance, thus minimizing the beam quality degradation due to space charge effects within the particle bunch. Designing such sources including optimization of its beam parameters is a complex …

Ultrafast High-Energy Electron Diffraction Study Of Photoexcited Bismuth Nanoclusters By Femtosecond Laser Pulses, Ahmed R. Esmail

Electrical & Computer Engineering Theses & Dissertations

The advancement in ultrafast electron crystallography (UEC) over the past few decades facilitated the study of structural dynamics in all phases of matter induced by femtosecond laser pulses. This technique became very powerful when the spatial resolution was combined with the temporal resolution, and succeeded in studying chemical reactions by ultrafast electron diffraction, bulk crystal phonons and melting by X-ray diffraction.

In this dissertation, I demonstrate the uniqueness of UEC and its potential in monitoring in real time the structural dynamics of bismuth (Bi) nanoclusters and islands induced by femtosecond laser pulses. Our approach to accomplish this task includes building …

Simultaneous Higher Harmonic Detection And Extraction Of Information From Oxygen Spectra, Karan Dineshchandra Mohan

Electrical & Computer Engineering Theses & Dissertations

Wavelength Modulation Spectroscopy (WMS) is a highly sensitive technique that utilizes synchronous detection at the N-th harmonics of a modulating frequency, by modulating the laser beam used to probe a gaseous species. The advantage of this technique lies in the greater effective signal-to-noise ratio one obtains as a direct consequence of the larger amount of structure present in the higher harmonics, and thus a greater amount of information that can be obtained from that structure. We present the development of a novel technique where data at multiple harmonics is obtained simultaneously, rather than sequentially. This removes the susceptibility of the …

Image Registration Using Conformal Log Polar Mapping, Bala Krishna Vadapally

Electrical & Computer Engineering Theses & Dissertations

Image Registration is the process of aligning, or overlaying two images of the same scene that were taken at different times and/or from different viewing angles and/or by sensors with different modalities or resolutions. The variations in the imaging environment induce the difference between the images of the same scene. In our situation, we have two images of the same scene taken with two sensors, one in the visible and the other in the infrared (IR) domain. The cameras are placed adjacent to each other on a stable platform, and the images are captured almost simultaneously. This means that the …

Compensation Of Loss And Stimulated Emission Of Surface Plasmon Polaritons, Guohua Zhu

Electrical & Computer Engineering Theses & Dissertations

Surface plasmon polaritons (SPPs) have become in recent years an important research topic because of their interesting, physics and exciting potential applications, ranging from sensing and biomedicine to nanoscopic imaging and information technology. However, many applications of surface plasmon polaritons are hindered by one common cause—absorption loss in metal.

Over the years, numerous proposals have been made on how to conquer the plasmon loss. In this dissertation, (1) the known solutions to the loss problem by adding optical gain have been reviewed; (2) the properties of surface plasmon polaritons are studied theoretically, and the solution of the controversy regarding the …

Joint Transform Correlation With A Synthetic Discrimination Function For Object Classification, Inder K. Purohit

Electrical & Computer Engineering Theses & Dissertations

A novel method using adaptive progressive thresholding (APT) and shifted phase-encoded fringe-adjusted joint transform correlation (SPFJTC) that employs a synthetic discriminant function (SDF) image for object classification is presented in this thesis. An adaptive progressive thresholding scheme first processes the given input scene to separate any objects present in the scene from the background. The preprocessing step results in an image having only the foreground objects, such as boats, trees and other cluttered regions, and hence reduces the search space for the correlation step significantly. The processed irμage is then fed to the shifted phase-encoded fringe-adjusted joint transform correlator, which …

Femtosecond Laser Ablation With Single And Two-Photon Excitation For Mems, Mohamed Abdelfattah Kottb Ahmad Elbandrawy

Electrical & Computer Engineering Theses & Dissertations

There is an increasing interest in femtosecond laser micromachining of materials because of the femtosecond laser's unique high peak power, ultrashort pulse width, negligible heat conductivity process during the laser pulse, and the minimal heat affected zone, which is in the same order of magnitude of the ablated submicron spot. There are some obstacles in reaching optimal and reliable micromachining parameters. One of these obstacles is the lack of understanding of the nature of the interaction and related physical processes. These processes include amorphization, melting, re-crystallization, nucleated-vaporization, and ablation.

The focus of this Dissertation was to study the laser-matter interaction …

Reflection-High Energy Electron Diffraction Study Of Si(100) Homoepitaxy By Femtosecond Pulsed Laser Deposition, Mohammed S. Hegazy

Electrical & Computer Engineering Theses & Dissertations

The dynamics of femtosecond pulsed laser deposition (fsPLD) of Si(!00)-1 x I and Si(!00)-2x I homoepitaxy are studied by in situ reflection high-energy electron diffraction (RHEED) and ex situ atomic force microscopy (AFM). The effects of substrate temperature, laser fluence and the pressure of a passive gas on the Si(!00)-1 x I growth mode are discussed. It is shown that films grow following the Volmer-Weber (3D) growth mode. The substrate temperature largely affects the morphology of the grown film. Below ~ 400 °C (at laser fluence of~ 1.9 J/cm²), randomly oriented 3D clusters are grown. This is shown …

Development Of An Efficient Ti:Sapphire Laser Transmitter For Atmospheric Ozone Lidar Measurements, Khaled A. Elsayed

Electrical & Computer Engineering Theses & Dissertations

The impetus of this work was to develop an all solid-state Ti:sapphire laser transmitter to replace the current dye lasers that could provide a potentially compact, robust, and highly reliable laser transmitter for differential absorption lidar measurements of atmospheric ozone. Two compact, high-energy pulsed, and injection-seeded Ti:sapphire lasers operating at a pulse repetition frequency of 30 Hz and wavelengths of 867 nm and 900 nm, with M² of 1.3, have been experimentally demonstrated and compared to model results. The Ti:sapphire lasers have shown the required output beam quality at maximum output pulse energy, 115 mJ at 867 nm and …

Coherent Differential Absorption Lidar For Combined Measurement Of Wind And Trace Atmospheric Gases, Grady James Koch

Electrical & Computer Engineering Theses & Dissertations

A lidar system was developed for making combined range-resolved measurements of wind speed and direction, water vapor concentration, and carbon dioxide concentration in the atmosphere. This lidar combines the coherent Doppler technique for wind detection and the differential absorption lidar (DIAL) technique to provide a multifunctional capability. DIAL and coherent lidars have traditionally been thought of and implemented as separate instruments, but the research reported here has shown a demonstration of combining the coherent and DIAL techniques into a single instrument using solid-state lasers. The lasers used are of Ho:Tm:YLF, which operates at a wavelength of 2 μm. This wavelength …

An Injection Modelocked Titanium-Sapphire Laser, James C. Hovater

Electrical & Computer Engineering Theses & Dissertations

I have investigated the possibility of using an injection modelocked Ti-sapphire laser as a illumination source for GaAs photocathodes. A commercial Ti-sapphire laser was modified to accept a seed pulse from a gain-switched diode laser. Modelocked operation was obtained through gain modulation within the Ti-sapphire crystal as a result of injection seeding with a modelocked pulse train from a gain-switched diode laser. The Ti-sapphire laser essentially becomes a pulse amplifier for the diode laser. Unlike conventional modelocked lasers, the pulse repetition rate of this laser can be discretely varied by setting the seed laser repetition rate equal to multiples of …

Wavelength Modulation Spectroscopy With Diode Lasers, Ying Lu

Electrical & Computer Engineering Theses & Dissertations

Wavelength Modulation Spectroscopy is a non-intrusive technique which enables several parameters such as concentration, velocity, and temperature of a target specie to be measured. The method involves a modulation of a probe laser beam and detection at the fundamental, or any harmonic frequency, by a phase-sensitive apparatus. The theory of wavelength modulation is discussed. Effects of the finite value of the wavelength modulation index, together with the effects of any residual amplitude modulation that often occurs simultaneously in a diode laser, are included. It is shown that there are several advantages in using detection harmonics orders greater than the second. …

Modelling An Optical Fiber Bragg Grating, Claudio Oliveira Egalon

Electrical & Computer Engineering Theses & Dissertations

A theoretical investigation of a single mode optical fiber with one and two superimposed Bragg grating is presented. The formulation relies in the determination of an approximate solution in the asymptotic region of one of the fiber parameters. A correction is then applied to the asymptotic solution using the Method of the Successive Approximations also known as the Piccard Method. The approximation was then compared to the numerical solution using the Runge-Kutta method. Assuming that each Bragg grating has modulation frequencies given by Ω₁ and Ω₂, it has been found that the second Bragg grating shifts the …

Thermal Effects On Y2O3:Eu3+ For Fiber Optic Temperature Sensing, Arnel C. Lavarias

Electrical & Computer Engineering Theses & Dissertations

Fiber optic methods have gained acceptance in the past several years as non­ intrusive optical techniques of measuring environmental variables, particularly under hostile conditions. Fiber optic temperature sensors are required for many applications which have a large operating range. One way to implement this sensor is to introduce rare earth-doped materials into a fiber showing temperature-dependent optical emission characteristics. The thermal effects on optical emission characteristics of Y₂O₃:Eu³⁺ were studied. The thermal broadening and temperature dependence of the lifetime (τ) of the 611.4 nm emission due to the ⁵D₀ ➔ 7F …

Absorption Imaging Studies On Intrinsic Gaas, John Samuel Kenney

Electrical & Computer Engineering Theses & Dissertations

A diagnostic technique has been developed which allows recording of the temporal and spatial development of electric field structures in GaAs photoconductive switches. The optical method is based on the Franz-Keldysh effect. Measurements were performed with a Nd:YAG activation laser and a GaAs laser diode as the probe laser. At low applied voltages a 100 atm wide region of high electric field is seen at the cathode only. With increasing voltage strong domain like structures emerge at the anode also. A calibration measurement shows that the electric fields in these domains are well above 50 kV/cm. At a threshold voltage, …

Study Of Single-Fiber Fiber Optic Lever Microphone, Trung Duc Nguyen

Electrical & Computer Engineering Theses & Dissertations

Fiber optic sensors are widely used in today's technological applications, providing many advantages that conventional sensors lack. In particular, there is a demand in hypersonic applications to develop microphones to measure acoustic pressure that performs in high temperature and noisy surroundings. This thesis analyzes fiber optic lever microphones (FOLM), since they perform at high temperatures. An FOLM system is an intensity modulated sensor, which is simple to implement and is small in size. Two models of the FOLM have been fabricated and calibrated. The first model uses a seven-element fiber array while the second uses a single-fiber to transmit and …

An Erasable Optical Memory Based On Stimulated Electronic Transition Concept, James D. Satira

Electrical & Computer Engineering Theses & Dissertations

Erasable optical memory systems with a high storage density and a large data transfer rate are required for many real time data acquisition systems such as those placed aboard NASA's space born platforms. A new concept for erasable optical memory involving stimulated electronic transitions (SET) will meet these requirements. The SET concept useful in erasable optical storage systems was demonstrated in MgS and SrS doped with Eu and Sm. The optical properties of these materials were studied. The reading and writing wavelengths for these samples were determined to be 950 and 514 nm respectively. The peaks of the emission spectra …