Engineering Education Commons^™

Assessment Of Multi Media & Web Based Instruction In A Science Technology & Society Course, Patricia Backer

Faculty Publications

Multimedia can be a powerful tool in exploring the nature of the world around us, including its technological systems. This paper describes the assessment of self-paced multimedia and web- based modules that are used in an advanced General Education (GE) course in the College of Engineering at San José State University. The development of these modules began in 1994 and has undergone many revisions. Currently, four of the seven units in this class are taught using either multimedia CDs or web-based material.The General Education course, Technology and Civilization (TECH 198), is designed to introduce students to the realm of history …

Technology And Gender Issues: Development And Assessment Of A Freshman General Education Course In The College Of Engineering, Patricia Backer

Faculty Publications

This class, Technology VS Women, explores the interaction of gender with technology and answers questions such as: Is technology a “male” science? Is modern technology compatible to both male and female users? What does history tell us about the role of women at work relating to technology? The ideas presented in this course challenges some commonly held myths and misconceptions about technology in our society. This course focuses on the technological changes since 1900 and how they have affected both men and women. The effect of cultural biases and perspectives on the working and educational environments also are addressed. This …

Ole Miss Engineer 2007

Ole Miss Engineer

No abstract provided.

Should There Be A National Curriculum For Technological Literacy?, Laura J. Hummell, Ethan B. Lipton, Melissa Morrow, Jerry Streichler, Karen Zuga

Publications

The author discusses her belief that the United States should have a national curriculum for technological literacy. The author asserts that there are huge discrepancies and deficiencies existing in technology-based curricula, and as a result students in the United States are being ill-prepared for living and working in a globally based economy and society. The author believes that if a national curriculum for technological literacy is developed it should resemble the Standards for Technological Literacy (2000/2002), which was created by the International Technology Education Association. The author points out that in order for such a curriculum to be successful it …

Resources: Student Friendly Modeling Materials, Todd R. Kelley, Jared Berrett

Publications

The article presents cost-effective materials for elementary classrooms that allow students to create models. These materials include card stock, clay, cable or zips ties, fasteners and bolts, and commercially manufactured building kits such as LEGOs, Erector Sets, Tinkertoys and K'Nex. In addition, the author asserts the importance of using such materials in promoting student learning of technology and engineering.

Resources: Building Big (And Small), Todd R. Kelley

Publications

The article offers a set of videos and web resources for elementary teachers to help them explore five different structures, including bridges, domes, skyscrapers, dams, and tunnels, that have been built big to meet the human needs and wants. It includes the miniseries video "Building Big" by David Macaulay and the website www.pbs.org/buildingbig.com.

Curricular Value And Instructional Needs For Infusing Engineering Design Into K-12 Technology Education, David K. Gattie, Robert C. Wicklein

Publications

An overarching objective of Technology Education in the U.S. is to improve technological literacy among K-12 students (DeVore, 1964; Savage and Sterry, 1990; International Technology Education Association, 1996, 2000, 2003). This is addressed in part through a focus on end-product technology and the use and importance of various technologies in society (Savage and Sterry, 1990). While such a focus is certainly necessary, it may not be sufficient if the objective is to infuse engineering into the technology education field. Current efforts at the University of Georgia propose adjusting the focus of Technology Education to a defined emphasis on engineering design …

Critical Features Of Engineering Design In Technology Education, Paul A. Asunda, Roger Hill

Publications

The purpose of this study was to find critical features of engineering design that can be incorporated within technology education learning activities, and develop a rubric for assessing these features. Data were collected through semi-structured interviews with three professors actively involved in engineering education. Supporting documents such as engineering design course outlines and rubrics were also examined. Using a phenomenological approach, this study identified the concept of engineering design, key features of the engineering design process, and critical elements that should be assessed in an engineering design activity in the context of technology education. A key product of the study …

Software For Student Team Formation And Peer Evaluation: Catme Incorporates Team-Maker, Richard Layton, Matthew Ohland, Hal R. Pomeranz

School of Engineering Education Faculty Publications

Last year, a multi-university research team designed a web-based peer evaluation instrument called CATME (Comprehensive Assessment of Team Member Effectiveness) that is simple to use. In a previous, smaller-scale research effort, a group of students and faculty developed a software package called Team-Maker that automates the process of assigning students to teams. The present work incorporates the functionality of the Team-Maker software package into the CATME system. The goal of the integrated package is twofold: 1) to provide a useful tool for faculty to manage teams at their institutions; and 2) to create a high-quality, easy-to-use tool for investigating research …

Training For Adjunct Faculty, Ronald Welch, Allen Estes, Carol Considine

Engineering Technology Faculty Publications

Professor, teacher, instructor, faculty member –all are cherished and incredibly important titles at any university. At the same time, every full-time faculty member knows that it took time to become a good teacher and that training and mentoring shortens the required train-up period. Members of the Civil Engineering Department Heads Council Executive Committee (DHCEC) have indicated that the American Society of Civil Engineers (ASCE) ExCEEd Teaching Workshop is a must have tool for developing new faculty. So why do we thrust a syllabus into the hands of adjunct faculty and wish them well – while it appears that some type …

The Case Method: Using Case Based Instruction To Increase Ethical Understanding In Engineering Courses, Brock Barry, Aman Yadav

School of Engineering Education Graduate Student Series

The case method: Using case-based instruction to increase ethical understanding in engineering courses Introduction

The paper presents a discussion of how case-based instruction is performed and the perceived benefits of its application. We begin with a brief discussion of the historical background of case- based instruction and then discuss the use of case methodologies within various educational contexts. Connections are then made to its use in general ethics instruction, as well as specifically engineering ethics instruction. Finally, we conclude the paper with a call for rigorous education research to compare the various methods of ethics instruction, including case-based instruction, and …

Stochastic Models For Enhancing Agility Of Supply Chains, Alok K. Verma

Engineering Technology Faculty Publications

This paper deals with the application of stochastic inventory model to the three-tier supply chain and verifying the values obtained by mathematical model with discrete event simulation. We investigate three-stage serial supply chain with stochastic demand and fixed replenishment lead-time. Inventory holding costs are charged at each stage, and each stage may incur a consumer backorder penalty cost charged by primary supplier to secondary supplier. The customer-demand follows Poisson distribution. We implement Base Stock model for inventory control at both suppliers. Computer simulation is then designed in such a way that it satisfied all the assumptions for mathematical model. Simulation …

Addressing Student Retention In Engineering And Engineering Technology Through The Use Of A Multidisciplinary Freshman Course, Anthony Dean, Bonita Anthony, Linda Vahala

Engineering Technology Faculty Publications

The Engineering Fundamentals Division of the Batten College of Engineering and Technology (BCET) at Old Dominion University administers a freshman engineering course sequence, along with four engineering departments (Mechanical Engineering, Civil and Environmental Engineering, Aerospace Engineering, and Electrical and Computer Engineering) and the Department of Engineering Technology (which offers degrees in Mechanical Engineering Technology, Civil Engineering Technology and Electrical Engineering Technology). The two course sequence, Exploring Engineering and Technology I and II, involve the five departments in teaching at least one five week module in each of the two courses. Each department generally involves the students in a basic design …

Introducing Freshmen To Construction Estimating And Scheduling Using K'Nex Bridge Kits, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

The College of Engineering and Technology at Old Dominion University has developed project-based courses for freshmen engineering students in order to engage them in engineering early with the goal of increasing retention. The courses are divided into three five-week modules that are distributed among the various departments within the college. The Engineering Technology department is responsible for two of the five week modules. One module is comprised of all the engineering technology curriculums; civil, electrical and mechanical, and the other module is strictly a civil engineering technology project.

The civil engineering technology project is focused on the construction industry. Students …

Managing A Distance-Learning Eet Laboratory Course Using Collaboration Software, Steve Hsiung, John Hackworth, Richard Jones, June Ritchie

Engineering Technology Faculty Publications

Methods of managing various distance learning EET laboratory courses using collaboration software are detailed. Particular emphasis is given to different types of collaboration software, advantages and disadvantages of each, and student and faculty feedback on the effectiveness of each.

Identifying University Minors To Support The Construction Specialization Area Within A Civil Engineering Technology Program, Vernon Lewis, Carol Considine

Engineering Technology Faculty Publications

Construction programs at many universities are diversified and provide students with opportunities to examine topic areas that include mechanical and electrical systems, safety, business administration, residential construction, real estate, and management. It is impossible for small civil engineering technology programs with a construction emphasis to encompass all of these expertise areas. As industry looks for students with a knowledge base in these areas, it is incumbent upon programs to find avenues to provide these educational opportunities to their students.

To meet the upper division general education requirements for Old Dominion University, students must have either a minor, second major or …

Enhancing Student Learning In Engineering Technology Programs? A Case For Physical Simulations, Alok Verma

Engineering Technology Faculty Publications

Physical simulations have a proven record as a teaching tool. Concepts that are often hard to grasp are made easy by the use of physical simulation activities. The constructivism learning theory suggests that people learn better by actively participating in the process of learning. According to the Encyclopedia of Educational Technology, "Simulation-based learning involves the placement of a student into a realistic scenario or situation. The student is then responsible for any changes that occur as a result of their decisions." A number of physical simulation based tools have been developed by the author for use as instructional tools to …

A Simple Electric Field Probe In A Gauss's Law Laboratory, Daniel O. Ludwigsen, Gregory N. Hassold

Physics Publications

Early in our calculus-based introductory course, students are introduced to electric fields and sometimes struggle with the abstraction of a vector field. They have less familiarity with the phenomena associated with electric fields, and the connection between phenomena and mathematical formalism is weaker. Our very next topic is Gauss's law.

Ole Miss Engineer 2006

Ole Miss Engineer

No abstract provided.

Project-Based Introductory To Materials Engineering Modules On Biomaterials, Solid Oxide Fuel Cells, Non-Volatile Memory, And Fiber Reinforced Plastics, Stacy Gleixner, Elliot Douglas, Olivia Graeve

Faculty Publications

PRIME Modules, Project Based Resources for Introduction to Materials Engineering, are being developed that utilize modern materials science and engineering technologies and proven education methodologies of active learning and open ended projects. The modules are designed for use in a freshmen/ sophomore level Introduction to Materials Engineering course. This course is required by most engineering programs and is an ideal place to excite students about their engineering majors and expose them to real world engineering experiences. Currently four of the classroom modules have been developed and utilized in Introduction to Materials classes. There is a non-volatile memory module where students …

How To Weave Entrepreneurship Into Engineering Education: The Experience At San Jose State University, Minnie Patel, Anuradha Basu

Faculty Publications

There is a growing consensus about the need for engineers and scientists to have entrepreneurial skills to be successful in their careers. However, there is a continued debate as to how best to impart these skills at the undergraduate level. It is possible to identify two routes to accomplish this objective. One route is to offer courses in engineering entrepreneurship and the other is to encourage students to participate in extracurricular activities that help to foster entrepreneurial skills. The most common approach adopted by a growing number of universities is to offer courses in entrepreneurship to engineering students. A more …

Year Two Annual Report: Activities, Findings And Evaluators' Reports, Naida Tushnet, Jodie L.S. Hoffman, Jaclyn Ziobrowski, Khadijah Salaam, Isabel Ochoa

Reports to NSF

A major challenge in the work of the National Center for Engineering and Technology Education has been the need to strengthen the research climate across the institutional settings. A number of activities have been directed at that effort: internal funding of small student and faculty research projects; presentations by researchers at Center meetings; providing a research focus for the required core courses in cognitive science, design, problem solving, and creativity; and the evolution of the research framework for the Center. The internal research program has been successful in providing relatively non-threatening experiences with proposal preparation, review, negotiation, and the conduct …

Introducing The Engineering Technology Programs To All Incoming Freshmen Engineering And Technology Students–The Result Is Better For All, Gary Crossman, Anthony Dean

Engineering Technology Faculty Publications

The Department of Engineering Technology at Old Dominion University participates in a freshman engineering course sequence, along with four engineering departments in the Batten College of Engineering and Technology. The two course sequence, Exploring Engineering and Technology I and II, involve the five departments in teaching at least one five week module in each of the two courses. Each department generally involves the students in a basic design project related to its discipline. Since the Department of Engineering Technology has three main programs – Civil, Electrical, and Mechanical – it has elected to divide its five week segment into three …

Comparing Computer Aided Drafting Curriculum Of Maquoketa Community School District In Relation To Twenty Other Schools' Computer Aided Drafting Programs In The State Of Iowa, Rhonda S. Welford

Graduate Research Papers

This study was to compare the Industrial Technology course offerings of computer aided drafting (CAD) courses at Maquoketa Community School District (MCSD) to the CAD courses offered at other high schools in the state of Iowa. The twenty school districts in Iowa which served as the basis for the study, are common in size and demographical area.

Ole Miss Engineer 2006

Ole Miss Engineer

No abstract provided.

A Multicultural Comparison Of Engineering Students, Zaki Shakir Seddigi, Luiz Fernando Capretz

Electrical and Computer Engineering Publications

A multicultural personality profile of engineering students is presented in this work. The Myers-Briggs Type Indicator (MBTI) was used as an instrument to sort personality types of engineering students at both King Fahd University of Petroleum and Minerals in Saudi Arabia and University of Western Ontario in Canada. The paper discusses the differences and similarities in the personality profile of Saudi and Canadian engineering students and its implications for engineering education in the light of the MBTI scales.

Internet Use By Teachers And Students In Engineering Colleges Of Punjab, Haryana, And Himachal Pradesh States Of India: An Analysis, Rajeev Kumar, Amritpal Kaur

E-JASL: Electronic Journal of Academic and Special Librarianship (1999-2009, Volumes 1-10)

Abstract

The aim of this study is to analyze the use of the Internet and related issues among the teachers and the students of engineering colleges in India’s three States viz. Punjab, Haryana and Himachal Pradesh. A well-structured questionnaire was distributed among the 1980 teachers and students of all the engineering colleges of the three states of India under study. The response rate was 80.9 percent. The present study demonstrates and elaborates the various aspects of Internet use, such as frequency of Internet use, methods used for learning of Internet skill, most frequently used place for Internet use, purposes for …

E-Resources And Services In Engineering College Libraries – A Case Study, K. R. Mulla, M. Chandrashekra

E-JASL: Electronic Journal of Academic and Special Librarianship (1999-2009, Volumes 1-10)

Introduction

Libraries have witnessed a great metamorphosis in recent years both in their collection development and in their service structure. Over the last several years, a significant transformation has been noticed in collection development policies and practices. Print medium is increasingly giving way to the electronic form of materials. This study examines libraries by region within the State of Karnataka, India. It examines the level of effort taken by the engineering college libraries in Karnataka to build electronic resources.

Development Of A Comprehensive Digital Avionics Curriculum For The Aeronautical Engineer, Thomas W. Hofer

Theses and Dissertations

The purpose of this research was to develop a comprehensive digital avionics curriculum for aeronautical engineering students at AFIT. Due to the closing of the aeronautical engineering program at the Naval Postgraduate School, and the subsequent requirement to establish a digital avionics specialty course sequence at AFIT, a mature avionics curriculum does not yet exist that satisfies the needs of graduates who will serve as aeronautical engineers involved with the development, integration, testing, fielding, and supporting of military avionics systems as part of the overall aircraft system. Research was conducted through a comprehensive literature review and the use of a …

Patterns In Team Communication During A Simulation Game, David M. Baca, Ray Luechtefeld, Steve Eugene Watkins

Engineering Management and Systems Engineering Faculty Research & Creative Works

The development of communication skills is a necessary preparation for effective engineering teamwork. Argyris' "Theory of Action" provides a framework for understanding patterns in team dialogue. Students can benefit from an awareness of these patterns. The theory highlights the detection and correction of errors by sharing information during group collaboration and interactions. Quality decision-making can be enhanced when members of a team develop high degrees of openness and interdependence. Quality decision-making can be diminished when members of a team regulate the information shared within the team. This work analyzes team interactions from simulation games used in an interdisciplinary engineering course …