Engineering Education Commons^™

Advancing Internationalization With Collaborative Online International Learning (Coil): A Systems Engineering Approach, Sharon Bommer, Olumuyiwa Asaolu, Paul Dagnall, Scott Segalewitz, Oluwatoyin Popoola, Esther Adeyemi

Journal of International Engineering Education

As globalization accelerates and engineering careers increasingly require international collaboration, engineering education programs must design courses and curricula to adequately prepare students for careers as engineers in modern industry. Collaborative Online International Learning (COIL) is a model of teaching and learning that supports the development of intercultural competence through a joint online learning environment. This paper presents a systems engineering approach of module development for an integrated COIL undergraduate course between a university in the United States and a university in Nigeria. The key objectives of this course are to increase students’ intercultural competence and to simulate global engineering management …

Aspirational Mirrors: A Conceptual Model Of Alumni-Led Near-Peer Outreach For Precollege Engagement In Ocean Engineering, Habibi Palippui, Juswan Sade

Journal of Pre-College Engineering Education Research (J-PEER)

Precollege students in Indonesia, especially in rural and coastal regions, often lack exposure to engineering disciplines due to social, geographic, and informational barriers. This essay proposes a conceptual model of alumni-led near-peer outreach as an affective and culturally grounded mechanism to engage high school students in ocean engineering. Drawing from theories of social similarity, possible selves, and engineering identity, the model conceptualizes alumni as “aspirational mirrors” who influence students not merely through information but also through identification. The model outlines four primary mechanisms—social connection, narrative engagement, aspirational mirroring, and early identity activation—and also accounts for contextual variables such as school …

Metacognition As Disciplinary Infrastructure In Ai-Mediated Learning, Tina R. Austin, Jason Gulya, Nick Potkalitsky

International Journal of Emerging and Disruptive Innovation in Education : VISIONARIUM

Metacognition is often presented as a response to generative AI’s disruption of teaching and learning, yet the term has become too generalized to guide practice. In AI-mediated environments, asking students merely to “reflect on your thinking” is insufficient. Because AI tools can redistribute cognitive labor, their educational value depends on how students use them and whether that use supports disciplinary forms of reasoning. This essay argues that metacognition must be understood as disciplinary infrastructure: students cannot effectively monitor their thinking without understanding the epistemological and ontological demands of the field in which they are working. Classrooms therefore become sites where …

Teaching Learning Newsletter Vol 6 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Examining Self-Direction In Learning Programming Among First-Year Students, Abigail Blalock

Student Research Symposium (SRS)

In this poster, we present empirical insights into first-year students’ self-direction in learning programming. In this study, we use a 25-item Personal Responsibility Orientation to Self-Direction in Learning Scale (PRO-SDLS) to assess the self-direction of first-year students in learning programming. The PRO-SDLS is comprised of 4 constructs: self-efficacy, initiative, motivation, and control. Additionally, this study examines the results of the PRO-SDLS across different demographic groups (i.e., first-generation, students with employment, financial aid, etc.). A pre- and post-survey was administered during the Fall 2024 semester in an introductory programming course for first-year engineering students. Data was collected from seven course sections, …

Rubric Enhanced Assessment Of Coursework And Teaching (React): Using Portfolios And Rubrics In An Engineering Classroom To Refocus From Grades To Learning, Nathan Lee Galinsky

2026 Scholarly Teaching Conference: Poster Session Papers

The goal of using rubrics in an engineering classroom is to make grading clearer for students and to enhance the learning efforts. Point based grading of work leaves students looking for the correct numerical solution or choice without thinking about their assumptions, process, or approximations. A rubric dissects grading to include the entire solution procedure emphasizing key steps in a solution procedure. Students also don’t have to wonder where partial credit will be focused or what emphasis a solution will be graded on when using rubrics. By combining the rubric assessment techniques with portfolios, students will be empowered to feel …

When Slides Replace Thinking: How Powerpoint Culture Undermines Conceptual Learning In Engineering Education, Shahin Nayyeri Amiri, Hamid Eisazadeh

Civil & Environmental Engineering Faculty Publications

Engineering education has gradually shifted from deep conceptual teaching to a culture dominated by presentation slides. In many universities today, core courses such as Statics, Dynamics, and Mechanics of Materials are taught through PowerPoint files rather than through reasoning, derivation, and problem solving. While slide-based instruction may appear efficient, it encourages passive learning and has severely weakened students’ ability to think independently and make sound engineering judgments. Traditionally, these fundamental courses were taught by seasoned instructors who had mastered the subjects and took genuine pride in explaining complex ideas with clarity and passion. They guided students through the logic behind …

Teaching Learning Newsletter Vol 5 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

How Does An Air Force Instructor Analyze Officer Occupational Competencies And Translate Them Into Professional Development Courses?, Julia A. Howard

Theses and Dissertations

This thesis examines how Air Force instructors translate officer occupational competencies into professional development courses. The study aims to address a pressing need to align Civil Engineer education with the Department of the Air Force objective of competency based education in the midst of changing operational demands. The methodology uses expert elicitation, thematic analysis, qualitative and quantitative statistics to formulate a curriculum development methodology. Data collection involved an expert elicitation from subject matter experts in the Civil Engineer career field. This data helped to pair 32E competencies with course learning objectives. The expert opinions provided insight into where civil engineering …

Teaching Learning Newsletter Vol 4 Issue 2, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Argument Schema Of Undergraduate Engineering Students, Anu Singh

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Critical thinking is one of the most desired skills in the workplace, as it assists an individual in solving complex problems and making informed decisions, resulting in their workplace success. Argumentation is one instructional approach that provides students an opportunity to engage in higher-order thinking and improve their communication skills. Argumentative writing provides opportunities to engage in multiple perspectives of a problem, provide evidence for the claim, evaluate evidence, engage in reasoning, and acknowledge self-bias, which automatically engages students in critical thinking. Previous literature has shown that despite the use of interventions and scaffolding approaches, students' argumentative texts lack elements …

Teaching Learning Newsletter Vol 4 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Influence Of The Work Environment On Workplace Learning Of Undergraduate Engineering Interns, Yashin Brijmohan

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Internships are an impactful form of workplace learning that helps undergraduate engineering students acquire and enhance competencies to improve their employability. However, the nuances about what makes an internship successful are not well understood. Furthermore, learning during engineering internships has not been thoroughly researched. Previous literature has mostly focused on internship outcomes, and there is little discussion on how to improve internship experiences to achieve the expected outcomes. Thus, this qualitative study explored the workplace learning environment of internships and how engineering undergraduate students engaged with workplace learning. The study has produced a comprehensive framework that illustrates important factors in …

Using Chatgpt With Novice Arduino Programmers: Effects On Performance, Interest, Self-Efficacy, And Programming Ability, Donald M. Johnson, Will Doss, Christopher M. Estepp

Journal of Research in Technical Careers

A posttest-only control group experimental design compared novice Arduino programmers who developed their own programs (self-programming group, n =17) with novice Arduino programmers who used ChatGPT 3.5 to write their programs (ChatGPT-programming group, n = 16) on the dependent variables of programming scores, interest in Arduino programming, Arduino programming self-efficacy, Arduino programming posttest scores, and types of programming errors. Students were undergraduates in an introductory agricultural systems technology course in Fall 2023. The results indicated no significant (p < .10) differences between groups for programming rubric scores (p = .50) or interest in Arduino programming (p = .50). There were significant differences for Arduino programming self-efficacy, (p = .03, Cohen’s d = 0.75) and Arduino posttest scores, (p = .03, Cohen’s d = 0.76); students in the self-programming group scored significantly higher on both measures. Analysis of students’ errors indicated the ChatGPT group made significantly (p < .01) more program punctuation errors. These results indicated novice students writing their own programs developed greater Arduino programming self-efficacy and programming ability than novice students using ChatGPT. Nevertheless, ChatGPT may still play an important role in assisting novices to write microcontroller programs.

Student Use Of Anchors And Metacognitive Strategies In Reflection, Anu Singh, Heidi A. Diefes-Dux

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Context: Self-regulation, a skillset involving taking charge of one’s own learning processes, is crucial for workplace success. Learners develop self-regulation skills through reflection where they recognize weaknesses and strengths by employing metacognitive strategies: planning, monitoring, and evaluating. Use of anchors assists learners’ engagement in reflection. Purpose or Goal: The purpose of this work was to gain insight into students’ use of anchors when reflecting on their learning. The two research questions: (1) To what extent do students link their self-evaluation and learning objective (LO) self-ratings to their reflections? and (2) What dimensions and level of metacognitive strategies do students use …

First-Year Engineering Students’ Motivation To Participate In Virtual International Collaborative Experiential Program (Vicep): An Expectancy-Value-Cost Approach, Cedrick Kwuimy, So Yoon Yoon

Journal of International Engineering Education

Changes in course delivery mechanisms necessitated by the COVID-19 pandemic created an opportunity to develop a Virtual International Collaborative Experiential Program (VICEP) as an alternative to traditional, travel-based study abroad programs. This paper presents the results of an investigation of engineering students’ motivation, perceived challenges, and preferred geographic areas for the VICEP. A sample of 116 first-year engineering students at the University of Cincinnati responded to survey items regarding their perceptions of motivation to participate in the VICEP, including in terms of expectancy, value, and cost, along with open-ended questions. Both male and female students scored the highest on value …

Teaching Learning Newsletter Vol 3 Issue 3, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Strategies For Engagement Of Non-Traditional Students In Engineering-Related Courses, Kimberly T. Luthi Dr., David Harvie, Keith Wilson, Monica Surrency

Publications

Project Goals

Overview

• Goal #1: Increase students' commitment to engineering pathways.
• Goal #2: Increase academic performance and persistence in engineering.
• Goal #3: Increase persistence of Veterans in engineering pathways.

Research Questions

• How does students' participation in peer-led team learning activities in online engineering courses correlate to their a) commitment to engineering, b) engineering identity, and c) self-efficacy.
• How do students in peer-led team learning activities compare to students in non-PLTL groups in terms of a) academic performance and b) persistence in engineering pathways?

A Student Induction Program’S Impact On Young “Techies’” Purpose In Life And Its Effects On Their Well-Being: A Case Study Of Telangana, India, Ankit Shah

Dissertations

India's higher education system aims to develop well-rounded individuals with intellectual curiosity, a spirit of service, and a strong ethical foundation. However, the current state of technical higher education in India is criticized for mono-disciplinarity and rigid boundaries that do not provide an appropriate context for developing socially conscious individuals who make productive contributions to society. To address this growing concern, the Department of Higher Education in India introduced the Student Induction Program (SIP). The primary objective of the SIP is to foster purpose, which is not only meaningful to the students themselves but also to their nation; as such, …

Teaching Learning Newsletter Vol 3 Issue 2, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Using Self-Efficacy Theory To Design Arduino Instruction For Novices: A Replication Study, Donald M. Johnson, Michael Pate, Christopher M. Estepp, George Wardlow

Journal of Research in Technical Careers

A replication study was conducted to determine the effectiveness of an instructional treatment based on self-efficacy theory when used with novice Arduino microcontroller users. Students (n = 32) in an introductory university agricultural systems technology course participated in a lesson on Arduino microcontrollers, circuit breadboarding, and Arduino programming which included four hands-on practice tasks, designed to provide students with positive mastery, vicarious and social persuasion experiences. Next, students completed a laboratory activity and were provided additional opportunities for mastery, vicarious, and social persuasion experiences. The one-group pretest-posttest design indicated the instructional treatment had significant (p < .001) and large effects in increasing students’ interest in Arduino, breadboarding self-efficacy, programming self-efficacy, and Arduino knowledge. These findings were consistent with the original study and provided additional evidence for self-efficacy theory as an effective model for developing instruction for novice Arduino users. Students’ written comments provided additional insight concerning the instructional treatment.

Promoting Skills In Children And Teens With Autism Spectrum Disorder Through Play And Steam, Meaghan Mcleod Mozingo, Krzysztof J. Rechowicz

Modeling, Simulation and Visualization Student Capstone Conference

Individuals with autism spectrum disorder (ASD) have a low employment rate. This is caused by a lack of support from employment resources and the negative stigma associated with common characteristics associated with ASD. With limited career-building activities and events, it is difficult for individuals with ASD to identify their skills, strengths, and career opportunities. Parental support is crucial when seeking employment opportunities for their children. Through the use of play, children with ASD engaged and explored their skills with science, technology, engineering, arts, and math-centered activities. This paper highlights the events and shows the proposed redesign for an additional workshop.

Approach To Problem Solving And Use Of Intuition By Engineering Technology Students, Meher R. Taleyarkhan, Anne M. Lucietto, Natalie L. F. Hobson, Therese M. Azevedo

Journal of Global Education and Research

Engineering technology students often forgo a methodical approach of solving or answering questions on assignments or exams in favor of an intuition-based approach, emphasizing educated guessing (Broberg et al., 2008). Faculty observations have noted these student solutions often provide explanations, usually sans calculations, to support answers the students believe to be reasonable when in reality deviated from the correct answer. An extensive study was developed to assess several distinctions between student intuition and use of cognition in problem solving, as related to a generalized student population. The study was comprised of a survey and interview. The survey utilized two instruments, …

Global Engineering Ethics: What? Why? How? And When?, Rockwell F. Clancy Iii, Qin Zhu

Journal of International Engineering Education

Even though engineering programs, accreditation bodies, and multinational corporations have become increasingly interested in introducing global dimensions into professional engineering practice, little work in the existing literature provides an overview of questions fundamental to global engineering ethics, such as what global engineering ethics is, why it should be taught, how it should be taught, and when it should be introduced. This paper describes the what, why, how, and when of global engineering ethics – a form adopted from a 1996 article by Charles Harris, Michael Davis, Michael Pritchard, and Michael Rabins, which has influenced the development of engineering ethics for …

Could The Inclusion Of Certain Building Information And Modelling Aspects Into The Leaving Certificate Engineering Syllabus, Aid The Transition Of Students Into Third Level Education, When Choosing A Course Within The Construction Industry, Joseph Boyle, Deborah M. Brennan

Capstone Reports

The paper investigates the effects of implementing several Building Information and Modelling (BIM) aspects into the Leaving Certificate Engineering Syllabus and examines the impact this has on students choosing third level Architectural Engineering and Construction (AEC) industry courses with the desire of improving the shortage in the sector. The method and content of the study was based on academic research on second level education in other European countries through the lens of a Literature Review. A sixteen-week pilot program was trialed with over one hundred students at Senior Cycle. The outcomes of the study were critically evaluated through stakeholder interviews …

Teaching Learning Newsletter Vol 2 Issue 2, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Increasing The Effectiveness Of K-12 Stem Worshops Through Targeted Context And Creative Technolgies, Melina Lopez

Master's Theses

Economic projections reveal a need for one million more Science, Technology, Engineering, and Math (STEM) professionals over the next decade than the United States is producing at the current rate. As a result, STEM education is a major focus of recent legislation and funding in Congress as the number of STEM professionals is inadequate to support innovation and the ever-changing economy. In response to the urgent need for more competitive STEM professionals, there has been a widespread implementation of workshops, organizations, and school programs aimed at amplifying K-12 student STEM literacy and interest. Some programs are even created to specifically …

Climate Justice In Engineering Education, Tyler J. Morgan, Donna Riley, Caroline M. Camfield

Discovery Undergraduate Interdisciplinary Research Internship

The goal of this research is to design a learning module for Purdue first-year engineering (FYE) students to learn climate fundamentals, and the role of engineers in responding to climate justice challenges. There is a lack of climate material within these classes currently, leading to a lack of climate conscious engineers in the future. The project entailed reviewing and synthesizing a wide variety of previous research on climate change education in engineering, including key learning objectives and their assessment. Because one of the key foci of the first-year engineering sequence relates to data analysis and management, we focused our work …

Teaching Learning Newsletter Vol 2 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Experiences During The Implementation Of Two Different Project-Based Learning Assignments In A Fluid Mechanics Course., Orlando Ayala, Kristie Gutierrez, Francisco Cima, Julia Noginova, Min Jung Lee, Stacie Ringleb, Pilar Pazos, Krishnanand Kaipa, Jennifer Kidd

Engineering Technology Faculty Publications

There is growing evidence of the effectiveness of project-based learning (PBL) in preparing students to solve complex problems. In PBL implementations in engineering, students are treated as professional engineers facing projects centered around real-world problems, including the complexity and uncertainty that influence such problems. Not only does this help students to analyze and solve an authentic real-world task, promoting critical thinking, but also students learn from each other, learning valuable communication and teamwork skills. Faculty play an important part by assuming non-conventional roles (e.g., client, senior professional engineer, consultant) to help students throughout this instructional and learning approach. Typically in …