Engineering Education Commons^™

Ole Miss Engineer 2014-2015

Ole Miss Engineer

No abstract provided.

A Highly Adaptive And Cost Effective Second Generation Incubator (Sgi) Towards Educational, Research And Clinical Processes, Yassir H. Al-Sayagh

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Today´s rising demand for more reliable and affordable alternatives to organ transplant has led to a growing market for in vitro tissue culture systems. The main objective of tissue engineering as a whole is to employ human tissue equivalents for commercial use. The state-of-the-art processes for producing these so called tissue models are still very expensive, difficult to produce and time-consuming.

To engineer tissues, in vitro, a three-dimensional support structure commonly termed scaffold is needed. Stem cells are then added to the scaffold. In order for tissue to materialize, the scaffold and the cells must be incubated (cultured) at a …

Students’ Perceptions Of And Responses To Teaching Assistant And Peer Feedback, Kelsey J. Rodgers, Aladar K. Horvath, Hyunyi Jung, Amanda S. Fry, Heidi Diefes-Dux, Monica E. Cardella

Interdisciplinary Journal of Problem-Based Learning

Authentic open-ended problems are increasingly appearing in university classrooms at all levels. Formative feedback that leads to learning and improved student work products is a challenge, particularly in large enrollment courses. This is a case study of one first-year engineering student team’s experience with teaching assistant and peer feedback during a series of open-ended mathematical modeling problems called Model-Eliciting Activities. The goal of this study was to gain deep insight into the interactions between students, feedback providers, and written feedback by examining one team’s perceptions of the feedback they received and the changes they made to their solutions based on …

Design Practices Of Preservice Elementary Teachers In An Integrated Engineering And Literature Experience, Kristen Bethke Wendell

Journal of Pre-College Engineering Education Research (J-PEER)

The incorporation of engineering practices and core ideas into the Next Generation Science Standards at the elementary school level provides exciting opportunities but also raises important questions about the preparation of new elementary teachers. Both the teacher education and engineering education communities have a limited literature base on the resources that novice elementary teachers bring to learning and teaching engineering. The purpose of this descriptive exploratory research study was to characterize the design practices used by preservice elementary teachers during an integrated engineering and literature experience. Using a modification of the Design Activity Coding Scheme (Atman et al., 2007), we …

High And Low Computer Self-Efficacy Groups And Their Learning Behavior From Self-Regulated Learning Perspective While Engaged In Interactive Learning Modules, Harry B. Santoso, Oenardi Lawanto, Kurt Becker, Ning Fang, Edward M. Reeve

Journal of Pre-College Engineering Education Research (J-PEER)

The purpose of this research was to investigate high school students’ computer self-efficacy (CSE) and learning behavior in a selfregulated learning (SRL) framework while utilizing an interactive learning module. The researcher hypothesizes that CSE is reflected on cognitive actions and metacognitive strategies while the students are engaged with interactive learning modules. Two research questions guided this research: (1) how is students’ CSE while engaged in interactive learning modules? and (2) how do high and low CSE groups plan and monitor their cognitive action, and regulate their monitoring strategies based on their CSE level? The research used a mixedmethods approach to …

Gender Differences In The Consistency Of Middle School Students’ Interest In Engineering And Science Careers, Marsha Ing, Pamela R. Aschbacher, Sherry M. Tsai

Journal of Pre-College Engineering Education Research (J-PEER)

This longitudinal study analyzes survey responses in seventh, eighth, and ninth grade from diverse public school students (n = 482) to explore gender differences in engineering and science career preferences. Females were far more likely to express interest in a science career (31%) than an engineering career (13%), while the reverse was true for males (58% in engineering, 39% in science). After controlling for student and school demographic characteristics, females were as consistent as males in their science career interests during the three years of the study but less consistent in their engineering career interests. Knowing an engineer significantly …

Online Resource Platform For Mathematics Education, Marisa Llorens, Edmund Nevin, Eileen Mageean

Reports

The aim of this project was to develop and explore the use of a Sharable Content Object Reference Model (SCORM) integrating a web-based platform for the study of mathematics as part of an active learning environment. The platform was designed to provide active support to engineering students especially those in their first year of study. Early use of the platform can identify possible areas of weakness and provide the self-learning environment required for students to become more proficient in areas where they are lacking key skills or are finding the concepts difficult to understand.

The platform consists of a set …

Using Design Hierarchy In A Linear Circuits Class To Illustrate The Scientific Method As A Human Invention, Douglas Deboer

Faculty Work Comprehensive List

There are various ways to classify academic studies. One might make a “two cultures” division, separating academic studies into the humanities and sciences. Or one might have three divisions: humanities, social sciences, and natural sciences. Or one might choose to classify academic studies along the lines of traditional academic disciplines such as theology, law, art, music, economics, social studies, languages, political studies, history, psychology, biology, physics, chemistry, math, etc. In our era of global commerce, where does engineering fit in these types of classification? What should engineers study? In a 2008 presidential debate, candidate Barack Obama said that, “Ensuring that …

A Qualitative Study Of Problematic Reasonings Of Undergraduate Electrical Engineering Students In Continuous Time Signals And Systems Courses, Farrah Fayyaz

Open Access Dissertations

Continuous Time Signals and Systems is a core course in the undergraduate electrical engineering curriculum. The topics covered in this course are difficult to learn conceptually because a significant number of topics are abstract, disconnected from a student's daily life, and make extensive use of mathematical modeling and formulas. Engineering educators have put in significant effort to design effective educational strategies for this course; however, there remained a gap in qualitative understanding of students' reasonings associated with difficulties in conceptual learning of the course content. This study aims to fill this gap by identifying problematic reasonings of undergraduate electrical engineering …

Engineering Design: A Cognitive Process Approach, Greg Joseph Strimel

STEMPS Theses & Dissertations

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. …

The Impact Of National Science Foundation Investments In Undergraduate Engineering Education Research: A Comparative, Mixed Methods Study, Jeremi Shavonda London

Open Access Dissertations

The U.S. invests billions of taxpayers' dollars in research tied to the national priorities that contribute to its competitiveness in a global economy. As the federal funding agency with an explicit focus on engineering education, the National Science Foundation (NSF) contains a portfolio of projects focused on improving the quantity of engineering graduates and the quality of engineering programs. Within the agency, the Division of Undergraduate Education invests approximately $190 million (FY 2012) annually on science, technology, engineering and mathematics (STEM) education projects. Although the DUE portfolio includes a suite a projects with different foci supporting national initiatives and Principal …

Leveraging Students’ Passion And Creativity: Ethos At The University Of Dayton, Margaret Pinnell, Malcolm Daniels, Kevin P. Hallinan, Gretchen Berkemeier

Mechanical and Aerospace Engineering Faculty Publications

The Engineers in Technical Humanitarian Opportunities of Service-learning (ETHOS) program was developed in the spring of 2001 by an interdisciplinary group (electrical, chemical, civil and mechanical) of undergraduate engineering students at the University of Dayton (UD). ETHOS was founded on the belief that engineers are more apt and capable to appropriately serve our world if they have an understanding of technology’s global linkage with values, culture, society, politics, and the economy. Since 2001, the ETHOS program at UD has grown and changed.

From conceptualization, to implementation, to maturation and national recognition, the program has addressed challenges of academic acceptance, programmatic …

The Use Of A Real Time Online Class Response System To Enhance Classroom Learning, Lulu Sun

Publications

A real time online class response system was used in class to quickly query student population’s grasp of concepts, engage class participation, check their attendance, and clarify any misconceptions. The biggest challenges for the instructor are time needed to learn the new system, creating effective concept questions, adequate coverage of course material, and ability to respond to instantaneous student feedback. Student challenges include increased confusion if inappropriate wording for the questions, and a negative reaction to the approach in general. Overall this is a highly flexible use of interactive technology for engaging students in any discipline during the class time.

Integrating Cognitive Science With Innovative Teaching In Stem Disciplines, Mark A. Mcdaniel, Regina F. Frey, Susan M. Fitzpatrick, Henry L. Roediger Iii

Books and Monographs

This volume collects the ideas and insights discussed at a novel conference, the Integrating Cognitive Science with Innovative Teaching in STEM Disciplines Conference, which was held September 27-28, 2012 at Washington University in St. Louis. With funding from the James S. McDonnell Foundation, the conference was hosted by Washington University’s Center for Integrative Research on Cognition, Learning, and Education (CIRCLE), a center established in 2011. Available for download as a PDF. Titles of individual chapters can be found at http://openscholarship.wustl.edu/circle_book/.

20140827.5: Engineering Office, 1952-1971, College Of Information Technology And Engineering

Guides to University Archives

These items include materials from the College of Information Technology and Engineering at Marshall University from 1952-1971. Items were received in 2014 and include notable materials about the history of Engineering at Marshall, including training for engineering students, library holdings, the Engineering curriculum report from 1962, samples of student work within Engineering, and the Citizens Committee for presentation and improvement of Engineering from 1972. This is not an exhaustive list. Please download the finding aid for a full list of contents.

Visualizing Mechanics: Educational Videos Demonstrating Core Mechanics Concepts, Camilo Schrader, Jeffrey Rhoads, Charles M. Krousgrill, Stephen Alex Stamm, Elizabeth Bushman

The Summer Undergraduate Research Fellowship (SURF) Symposium

There has been an increased interest in using technology to relay information over the past 20 years. This interest has been reflected in the way the internet has expanded to incorporate nearly-uncountable numbers of blogs, streaming videos, and discussion forums. Recent research has shown that younger generations of students prefer internet-based platforms such as these to communicate and learn, as they are congruent with a visual style of learning. The present study seeks to fuse the predominantly reflective and intuitive methods found in a traditional lecture with the more visual and active modes of learning to provide a larger range …

Chronological And Pedagogical Analysis Of Global Real-Time Assessment Tool For Teaching Enhancement (G-Rate), Syafiah Mahfuzah Johari, Monica Cox, Nikitha Sambamurthy

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Global Real-Time Assessment Tool for Teaching Enhancement (G-RATE) serves as a pedagogical feedback tool to assess teaching performance in learning environments. This tool is developed based on How People Learn (HPL) framework, which specifically identifies four dimensions which are essential elements of an effective learning environment which are community-centeredness, learner-centeredness, assessment-centeredness and knowledge-centeredness. However, there are no succinct and meaningful representations for frequency and chronological observational data and no interpretation has been made from the collected observation data so far. This study addresses two different methods to observe the patterns from the observation data. First, observation data is compared …

Investigating Attitudes Toward Diversity Among Engineering And Management Students, Xiuli Wang, Brent K. Jesiek, Qin Zhu

The Summer Undergraduate Research Fellowship (SURF) Symposium

As the world becomes increasingly globalized, students and professionals face growing challenges related to working across national and cultural boundaries. A related concern for today’s educators and researchers is a lack of effective assessment tools to measure global competency among students in engineering, management, and other professional fields. To begin addressing this gap, two previously validated measures of personal attitudes and perceptions toward diversity were administered to students in multiple professional fields, as it was hypothesized that a positive attitude toward diversity is likely one of the major qualities that makes engineers and other professionals perform more sensitively and effectively …

Understanding And Assessing Engineering Practices In Indian Context, Rudie Desravines, Brent Jesiek, Kavitha Ramane, Qin Zhu

The Summer Undergraduate Research Fellowship (SURF) Symposium

For engineers and other technical professionals, working with individuals in a global context is often challenging and requires understanding and openness to other cultures. However, the core of engineering education has historically been focused on mathematical and technical foundations, with a lack of emphasis on broader capabilities such as global competency. Further research is needed to better understand differences in engineering education and practice across national and cultural boundaries, as well as to develop new instructional content and assessment techniques to improve and evaluate the global competency of engineering students and other technical professionals. This project addressed these needs through …

Engineering Leadership Assessment Tool Profile, Karan Sharma, Monique Ross, Monica F. Cox

The Summer Undergraduate Research Fellowship (SURF) Symposium

Numerous studies have been conducted stressing the importance of developing the professional skillset of engineers. This need has been further highlighted by the Engineering Criteria 2000 and by the National Academy of Engineers (Kumar and Hsiao, 2007, p. 19). Having realised the need to develop the professional skillset of engineers such as leadership, interpersonal skills, teamwork and communication, universities have started incorporating methods to hone these skills in their courses. However in today’s competitive world, every practice needs to be assessed and measured for accountability and effectiveness. Engineering education is no exception to this rule. There needs to be a …

Organizing A Student Poster Session In An Asee Section Conference, Steve Eugene Watkins, Les Kinsler, Julia L. Morse, Douglas R. Carroll

Electrical and Computer Engineering Faculty Research & Creative Works

Student poster sessions at conferences can be valuable experiences for undergraduate and graduate students and can enrich the conference program for all participants. Student poster presentations beyond the local campus can provide additional experience in professional communication (especially in preparing succinct abstracts and in effective visual design), can prepare students for future conference participations, and can facilitate student-faculty interaction. Several issues exist when including student poster sessions in engineering education conferences. How can the content of posters be related to an engineering education theme? How are communication principles of audience and purpose incorporated into the session guidelines and review process? …

Large Research Center Education And Outreach: Lessons From 5 Years Of Distributed Collaborative Design, Development And Implementation, Sean Brophy, Thalia Anagnos

Faculty Publications

Paper from the 121st ASEE Annual Conference, Indianapolis. The George E. Brown, Jr. Network for Earthquake Engineering Summation (NEES) completes its tenth year of operation in September 2014. The NEES Center consists of a network of 14 large-scale experimental laboratories that collaborate and share resources in support of research to inform civil engineering practice and reduce losses from future earthquakes. Since the development of the center in 2003, the education, outreach and training (EOT) program has grown from a federation of local outreach activities to an integrated network of “specialists” working together to obtain significant impact towards defined education goals. …

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

Materials Science and Engineering Faculty Publications and Presentations

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

The Peer Collaborative: Supporting Engineering Education Research Faculty With Near-Peer Mentoring Unconference Workshops, Alice L. Pawley, Adam R. Carberry, Monica E. Cardella, Maria-Isabel Carnasciali, Shanna R. Daly, Jenna L. Gorlewicz, Geoffrey L. Herman, Morgan M. Hynes, Shawn S. Jordan, Nadia N. Kellam, Micah Lande, Matthew A. Verleger, Dazhi Yang

Engineering and Applied Science Education Faculty Publications

The PEER Collaborative National Network is a national peer mentoring network for early career tenure-track or mid-career tenured faculty who conduct and are primarily evaluated based on their research related to engineering education. This paper discusses the development, logistics, and outcomes of two PEER workshops built around a community of practice framework. Data from internal and external evaluations are presented to provide insights into aspects that worked well and aspects that need further development. Additionally, by reflecting on the workshops, participants crafted vignettes describing the impact the PEER workshops had on their personal and professional lives. The paper concludes with …

Ethical Reasoning Development In Project-Based Learning, Elizabeth Pluskwik, Puteri S. Megat Hamari

Integrated Engineering Department Publications

This paper will describe the method of ethics instruction in a specific project-based learning program with the aim to improve the current level of moral reasoning skills in the engineering students enrolled in the program. The Accreditation Board for Engineering and Technology (ABET) and the National Society of Professional Engineers (NSPE) have endorsed efforts to improve the teaching of ethics in the engineering curriculum. Criterion 3-f of the ABET outcomes,specifically calls for student attainment of an understanding of ethical and professional responsibility. In response, engineering educators seek to develop curriculum to improve moral reasoning skills, which should lead to increased …

The 360° Of Information Fluency Delivery To Freshman Engineering Students, Marian G. Armour-Gemmen, Robin A.M. Hensel, Mary L. Strife

Faculty & Staff Scholarship

For three years, engineering librarians from West Virginia University (WVU) have been teaching information fluency skills to 700-1000 freshman engineering students per year, using a specific information fluency cycle. The librarians’ responsibilities in the Fall 2013 course syllabus included teaching once in each section, providing a two-hour, in-library group sessions to accommodate almost 700 students, delivering an intellectual property Blackboard™ module for students to complete over a specific period of time, and requiring students to complete a Plagiarism Avoidance Tutorial with quiz. Some of these components are similar to those of past semesters. However, past collection of the data was …

An Integrated Approach To Developing Technical Communication Skills In Engineering Students, Ronald S. Harichandran, David J. Adams, Michael Collura, Nadiye O. Erdil, David Harding, Jean Nocito-Gobel, Amy Thompson

Engineering and Applied Science Education Faculty Publications

The Project to Integrate Technical Communication Habits (PITCH) is being implemented across seven engineering and computer science undergraduate programs. The overarching goal of PITCH is to develop written, oral and visual communication skills and professional habits in engineering students. PITCH activities begin in the very first semester and are reinforced and extended through all four years of each program. Senior design becomes the culminating experience in which students demonstrate the skills and habits acquired through PITCH courses. Student outcomes for the project were established based on an extensive survey of employers, alumni and faculty. Communication instruments include technical memoranda, poster …

Incorporating Active Learning Into The Graphical Communications Course, Lulu Sun

Publications

Active learning, is a student-centered learning strategy which has recently gained considerable attention in higher education. The literature has shown that active learning has led to better student attitudes and improvements in their thinking, communication, leadership, and writing skills. The core elements of active learning are student activities and engagement in the learning process. As more faculty look for alternatives to traditional teaching methods they have strongly advocated active learning. However, the potential challenges for faculty with such an approach cannot be ignored such as increased class preparation time, the risks of student dissatisfaction, the use of instructional technology, and …

The Status Device, John Worcester, Jon Pace, Gabe Guodace, Santos Perez

PSU High School Innovation Challenge

We have come across an issue, that has saddened us deeply. The problem being that there are numerous stories across the nation about elderly patients with dementia and Alzheimer are getting lost and dying. These are not just stories about people losing track of where they live, but elderly patients under the care of senior home staff. Obviously not everyone can be everywhere at once, and we don't expect that. What we want to do is make it easier for the staff, assurance for the families, and almost importantly, for the patient.

What our plan is to do, is to …

Medibox, Bronson Kim, Chris Halverson, Devon Straub, Rose Adrian, Theo Nyguen

PSU High School Innovation Challenge

Thoughts on design Concepts:

• Product must fill a need and appeal to its target consumer.
• A product must be wanted

The Industry's design concept for the elderly:

• Slightly alter products aimed toward other people.
• Promise to improve their lives by adding something new to their routine.

Our Findings and Ideas:

• The elderly have developed their methods and routines.
• They don't need something new to worry about.
• A product for the elderly should enhance their lives without burdening or inconveniencing them.
• Utilizing a familiar form and with an inventive look at exiating functionality.
• It is important to allow the elderly to …