Engineering Education Commons^™

Engineering Design And Analysis Using Creo® Cad, Cae, And Manufacturing Applications, Swapnil Moon

Open and Affordable Textbooks

This textbook presents a structured approach to computer-aided design using Creo, integrating CAD, CAE, and CAM workflows within a unified engineering framework. The material emphasizes parametric modeling, design intent, and feature-based modeling as foundations for creating robust and adaptable engineering models. Through progressively structured tutorials, students develop skills in part modeling, assemblies, engineering drawings, mechanism design, simulation, and manufacturing. The text incorporates real-world engineering components and workflows, including structural and thermal analysis, motion simulation, and toolpath generation, reflecting modern engineering practice. Designed for upper-division undergraduate and graduate students, this open educational resource supports hands-on learning and prepares students for industry-relevant …

Introduction To Computer-Aided Design Using Solidworks® : A Structured Approach To Parametric Modeling And Design Intent, Swapnil Moon

Open and Affordable Textbooks

This textbook introduces computer-aided design (CAD) using SOLIDWORKS® through a structured, design-centered approach that emphasizes parametric modeling and engineering reasoning. Rather than focusing solely on software commands, the material develops foundational skills in design intent, constraint-based modeling, and feature relationships to create robust, adaptable models.

The content is organized progressively, beginning with basic sketching and feature creation and advancing to complex part modeling, assemblies, motion studies, and engineering drawings. Each chapter builds upon prior concepts, reinforcing systematic modeling practices and promoting the development of system-level thinking required in real-world engineering design workflows.

Designed for undergraduate students with little or no …

Design Of A Fuzzy Set-Point Tracking Controller Based On The State-Dependent Control Characteristics Of Fuzzy Logic And Pid For Temperature Control Systems In Electrical Equipment, Rahim Mammadzada

Chemical Technology, Control and Management

This paper presents a Fuzzy-SPT (Fuzzy Set-Point Tracking) controller designed to combine the strengths of FLC (Fuzzy Logic Control) and PID (Proportional-Integral-Derivative) control while mitigating their limitations across varying operating conditions. Inspired by state-dependent reasoning but implemented within a single controller, the method uses internal logic to adapt the control effort across different operating regions. FLC handles rapid changes and nonlinear transients, enabling fast system response without overshoot, while PID-like integral action is activated when the FLC reaches steady state or enters a threshold region near the set point, eliminating residual errors and maintaining stable performance. By applying each behavior …

Experiential Learning And The Revitalization Of Manufacturing Education At The University Of Dayton, Sean Cahill

Research and Reflection on Learning and Teaching in Higher Education

This perspective paper explores the role of experiential learning in preparing future-ready manufacturing engineers at the University of Dayton, set against the backdrop of Dayton’s legacy as an industrial innovator and the broader national movement to revitalize domestic manufacturing. As automation, cyber-physical systems, and Industry 4.0 technologies reshape the manufacturing landscape, there is a growing need for engineers who possess both technical fluency and systems-thinking capabilities. To meet this need, the manufacturing engineering technology department implemented hands-on, integrated lab-and-lecture modules through support from the Experiential Learning Innovation Fund for Faculty (ELIFF). Grounded in Kolb’s Experiential Learning Theory and constructivist learning …

Modern Significance And Development Trends In The Production Of Vegetable Oils, Umidjon Ruziev, F.O. Qosimov, M.K. Shodiev

Chemical Technology, Control and Management

This article provides a comprehensive analytical review of the current state of the global vegetable oil production market. It describes the diversity of raw materials supplied, which includes both traditional and emerging fat sources. The paper also describes the technological stages of production, emphasizing modern innovations that contribute to more efficient, high-quality, and safe production. The article also covers global trends by comparing production dynamics between countries, highlighting regions with the highest rates of production growth and explaining the reasons for their competitive advantages. Particular attention is paid to environmental and socio-economic aspects, including sustainable land use, certification, carbon footprint, …

Development And Operationalizing Of The Learning Experience Design Process To Create Integrated Stem Interventions, Vanessa Begat

LSU Doctoral Dissertations

Globally, the demand for people prepared to enter Science, Technology, Engineering and Math (STEM) careers is increasing. To help fill this demand, many formal and informal STEM educational interventions have been implemented in the K-12 domain. However, due to the lack of a clearly defined framework for documenting the nature and scope of the intervention (National Research Council, 2014), the interventions vary greatly in their success, sustainability, and replicability. This research is grounded in Educational Design Research and uses the principle of Learning Experience Design (LXD) to develop a framework for thoughtfully designing and documenting a STEM intervention. This framework …

Smart Manufacturing For Cal Poly's Ime Curriculum, Grace L. Guarraia, Eric F. Ledesma

Industrial and Manufacturing Engineering

California Polytechnic State University, San Luis Obispo (Cal Poly) takes pride of supporting one of the nation’s strongest undergraduate Industrial and Manufacturing Engineering programs. However, as industry evolves to accommodate advancing computing power, improved manufacturing algorithms, and improved robotics, it is imperative that Cal Poly’s curriculum evolves in parallel. Smart manufacturing is the future of the manufacturing industry, and Cal Poly is searching for the ideal method to teach and integrate Smart Manufacturing into its classes. With its upcoming switch to the semester system, coupled with its “Learn by Doing” motto, the department is at an ideal period for the …

Understanding The Link Between Conflict Profiles And Team Affective Outcomes Using Lpa And Nlp Techniques, Francisco Cima, Pilar Pazos-Lago

Engineering Management & Systems Engineering Faculty Publications

Team conflict is a naturally emerging phenomenon resulting from individuals' interactions during project execution. Cross-disciplinary teams can experience higher levels of conflict than single-discipline teams because of the increased diversity of knowledge and perspectives. Research has shown that team conflict can emerge from different types of disagreements (cognitive and interpersonal), which have different implications for team functioning. Past empirical research has focused on the impact of both conflict types independent from each other while overlooking their combined effects. This work examines the conflict profiles resulting from the combined levels of interpersonal and cognitive disagreements and their association with team outcomes. …

Advancing The Manufacturing Engineering Technology Pathway: Innovating And Developing The Curriculum (Courses And Labs) From Associate To Bachelor's Level, Afi Anuar, Vukica Jovanovic, Nathan Luetke, Hamid Eisazadeh, Isaac Flory Iv, Mileta Tomović, Anthony W. Dean

Engineering Technology Faculty Publications

The southeastern region of Virginia, specifically Hampton Roads, has a diverse manufacturing landscape encompassing a range of enterprises, from small businesses to large corporations. This sector includes shipbuilding, construction machinery, aeronautics, and food processing. However, both the region and the broader state of Virginia are struggling with a skilled labor shortage that fails to meet the demands of these manufacturing enterprises. This paper aims to provide insights into the recently established Manufacturing Engineering Technology (MFET) program at Old Dominion University, located in Norfolk, Virginia. The MFET program features a comprehensive curriculum, encompassing the development of new courses and the establishment …

Mouralherwaqh Coastal Wetland Road Crossing Da'luk, Romel Robinson Ii

Cal Poly Humboldt theses and projects

The integration of Indigenous and Western science plays an essential role in Tribally led collaborations for land management. This process of woven sciences is rooted in reciprocal relations and partnerships guided by Tribal Nations. Our cohort was invited by Wiyot Tribal Representatives to investigate a culvert located within the wetlands of Mouralherwaqh— a parcel of land reacquired by the Wiyot Tribe in 2022. This document seeks to share our experience and analysis as part of the Wiyot Tribe’s broader journey in navigating ecocultural restoration projects within Mouralherwaqh. The four community interests we investigated for the wetland crossing included a resized …

Empowering Student Success: Unlocking The Potential Of Project-Based Steel Design Education, Aly Mousaad Aly

Faculty Publications

In the pursuit of student success, it is essential to acknowledge that a singular teaching style does not universally cater to all students. The educator's crucial role lies in creating an optimal learning environment that fosters students' endeavors to excel. This endeavor transcends mere classroom success or employment prospects, encompassing a broader impact on societal well-being. An experiential learning approach, where students actively engage in practical tasks, emerges as the most effective mode of instruction. Integrating project-based learning activities into the curriculum holds immense potential for enhancing student learning. Additionally, the utilization of analysis software tools like FTool and STAAD …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Cybersecurity In Industrial Automation Lab Design For Ee 435, Jules Khalil Emile Hajjar, Emily Zhou

Electrical Engineering

This project involves the creation of an instructional laboratory aimed at teaching cybersecurity for industrial automation applications. Specifically tailored for Electrical Engineering students at Cal Poly, the experiment focuses on configuring the Modicon M580, a PLC from Schneider Electric, and serves to introduce students to relevant cybersecurity protocols and techniques. This project will be implemented into the EE435 (Industrial Power Control and Automation) course curriculum upon Cal Poly’s transition to the semester system.

Integrating Ace And Mca Requirements Into The Civil Engineer Officer Occupational Competency Framework, Stone D. Williford

Theses and Dissertations

The Air Force Civil Engineer officer career field has made dedicated efforts to the professional development of its company grade officers. In response to the 2015 Air Force Strategic Master plan, the Civil Engineer officer career field adopted a competency-based education approach. In 2020, the Civil Engineer Officer Career Field Education and Training Plan was published, officially integrating the career field’s operational requirements into a competency framework. However, since 2020, the Air Force has adopted an updated force generation strategy, and with it, changes to the way the Air Force assets are employed in contingency environments. This new scheme of …

Enablers And Barriers Of Communication In Virtual Engineering Teams: The Role Of Teamwork Skills And Emergent Conflict, Pilar Pazos, Francisco Cima

Engineering Management & Systems Engineering Faculty Publications

Communication is a critical process that facilitates team members' coordination, expertise exchange, decision-making, and, consequently, team elfectiveness. A focus on effective communication is critical in virtual teams due to their lack of face-to-face interactions and social presence. Communication becomes challenging in remote settings, and specific skills emerge as more essential to success. It is known that effective teams rely on planning, execution, and interpersonal skills to be successful. Still, the specific impact of these skills on virtual team effectiveness is not well understood. Additionally, conflict can emerge as a significant barrier to collaboration for remote teams that can hinder their …

Spatial And Temporal Variation Of Selected Water Quality Parameters In The Tanzanian Side Of Lake Victoria, Richard Joseph Kimwaga

Tanzania Journal of Engineering and Technology (TJET)

Lake Victoria’s water quality is increasingly becoming under heavy pressure mainly due to land based activities and aerial inputs which are taking place within the basin. This study was carried out to assess the spatial, including vertical and temporal, variation of the water quality of Lake Victoria on the Tanzanian side. Historical water quality data for the period from 2000 to 2016 was collected. Temperature, pH, Dissolved Oxygen (DO) and Turbidity were selected for study since they are the mostly measured and monitored water quality parameters. Land use-land cover changes were analysed using ArcGIS. ILWIS 3.7 software was used to …

Clarity, Organization, Precision, Economy: A Technical Writing Guide For Engineers, David J. Adams, University Of New Haven

Civil Engineering Faculty Book Series

This fourth edition of COPE was sparked by my involvement with PITCH (Project to Integrate Technical Communication Habits) at the Tagliatela College of Engineering at the University of New Haven. This new edition contains additional material on data displays, as well as some additional material on writing about data—including how to avoid rhetorical shifts that undermine the precision of a technical report.

Agile Research - Getting Beyond The Buzzword, Trupti Narayan Rane

Engineering Management & Systems Engineering Faculty Publications

"Oh yeah, we're an Agile shop, we gave up Waterfall years ago." - product owners, managers, or could be anyone else. You will seldom have a conversation with a product or software development team member without the agile buzzword thrown at you at the drop of a hat. It would not be an oversell to say that Agile software development has been adopted at a large scale across several big and small organizations. Clearly, Agile is an ideology that is working, which made me explore more on its applicability in research. As someone who has been in the Information Technology …

Top-Down & Bottom-Up Approaches To Robot Design, Dylan Michael Covell

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis presents a study of different engineering design methodologies and demonstrates their effectiveness and limitations in actual robot designs. Some of these methods were blended together with focus on providing an easily interpreted project design flow while implementing more bottom-up, or feedback, elements into the design methodology. Typically design methods are learned through experience, and design taught in academia aims to shape and formalize previous experience. Usually, inexperienced engineers are taught approaches resembling the Verein Deutscher Ingenieure (VDI) 2221 process. This method presented by the Association of German Engineers in 2006 is regarded as the general system design process. …

Design And Analysis Of The Virtual Reality Welding Training, Ritesh Chakradhar

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Ritesh Chakradhar on November 19, 2021.

Modernization Of Scienttific Mathematics Formula In Technology, Iwasan D. Kejawa Ed.D, Prof. Iwasan D. Kejawa Ed.D

Department of Mathematics: Faculty Publications

Abstract
Is it true that we solve problem using techniques in form of formula? Mathematical formulas can be derived through thinking of a problem or situation. Research has shown that we can create formulas by applying theoretical, technical, and applied knowledge. The knowledge derives from brainstorming and actual experience can be represented by formulas. It is intended that this research article is geared by an audience of average knowledge level of solving mathematics and scientific intricacies. This work details an introductory level of simple, at times complex problems in a mathematical epidermis and computability and solvability in a Computer Science. …

The Technology Transfer Network Dynamic In The Information Technology Industry Of Yucatan, Mexico, Francisco Cima, Pilar Pazos, Ana Maria Canto

Engineering Management & Systems Engineering Faculty Publications

The present paper explores the technology transfer linkages among universities, research centers, and private companies in Yucatan, Mexico's information technology industry. Social network analysis (SNA) was used as a method to identify the structural characteristics of the technology transfer collaborations, and the changes in the patterns of interactions among institutions over the years. Data were obtained from the National Council for Science and Technology repository (CONACYT). Associations formed to enhance technology advancement and innovation practices between 2010 and 2018 were analyzed in this study. Network transitivity, the patterns of triadic configurations, and heterophily were compared to uncover the evolution of …

Flipping The Classroom For Introduction To Probability And Statistics For Engineers, Philomena Krosmico

Graduate Theses, Dissertations, and Problem Reports (ETD)

Introduction to Probability and Statistics for Engineers, IENG 213, is a foundational course in the Industrial Engineering curriculum at West Virginia University (WVU). The challenge has been finding the best teaching method to instill concept learning. A “flipped classroom” teaching style has been gaining momentum throughout higher education and has had proven success in STEM fields. At WVU, beginning with the 2016 Fall semester, the teaching model for the class used a flipped classroom style for one of the instructors. Data on statistical concept learning, using the University of Oklahoma validated statistics concept inventory instrument (Allen K., 2006), was collected …

Solar Photovoltaic Performance Monitoring: A Bibliometric Review, Research Gaps And Opportunities, Javed Sayyad, Paresh Nasikkar

Library Philosophy and Practice (e-journal)

Electrical power generation has been revolutionized by growing demand and use of Renewable Energy (RE) sources such as Solar Photovoltaic (SPV) as the main electricity source in modern times. The main objective of this bibliometric analysis is to understand the scope of the literature available for SPV performance characterization. This detailed reviewed was performed on the documents related to SPV research considering all the subject categories from Scopus and Web of Science (WoS) databases. The patterns for the particular set of keywords were broke down with the recuperated outcomes from Scopus database in the language, publication type, year of publication, …

Systems Thinking In Engineering Design: Differences In Expert Vs. Novice And Relationship To Personality Traits, Yuzhen Luo

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Systems thinking is the ability to see the big picture and the related elements when designing, and how these relationships form the big picture. In engineering design, systems thinking is valuable to both industry, as well as engineering education. As such, it creates opportunities for researchers to better understand systems thinking of both professional engineers in industry, who are assumed to be the experts, and engineering students in higher education, who are assumed to be the novices. The purpose of this study was to compare and identify the differences between expert and novice systems thinking in engineering design. Additionally, the …

Emergence And Compassion: A Reflection On Interpersonal Priorities Strategies Within Collaborative Settings, Chanel Beebe

Purdue Journal of Service-Learning and International Engagement

The nature of work with and for humans and communities requires intentional relationship building that can be rife with complexities, foibles, discomfort, and learning. As scholars, researchers, practitioners, educators, and students, we carry a multitude of identities and dispositions that make collaborative work and change-making a messy and potentially emotional journey. Thus, many groups that find themselves on this journey often struggle to develop harmonious or impactful lasting relationships and often create toxic or harmful working environments for those who are the most marginalized or have the least power. The goal of this work is to provide a reflection on …

Work In Progress: Students' Perception Of Collaborative Online International Learning, Philip Appiah-Kubi, Jennifer Nichwitz

Engineering Management and Systems Faculty Publications

Teaching and learning in the digital age harness the opportunities created by internet technologies to distribute and learn various information all over the world. This is commonly referred to as connectivism, and it values the impact of stakeholder information appraisal skills, virtual and personal communication skills [1], and the sense of cultural awareness. Collaborative Online International Learning (COIL), a type of connectivism, typically involves instructors and students from at least two geographically and culturally distinct areas who collaborate virtually on a common project for four or more weeks.

The objective is to create a culturally diverse virtual environment where students …

Curriculum Optimization Via Activity-On-Node Network Modeling, Caroline Rhomberg

Industrial Engineering Undergraduate Honors Theses

University degree plans must be carefully planned so that they allow students the best chance of succeeding. Although for the better, with the advancement of technology and its incorporation into the classroom, it can be argued that the complexity and difficulty of some long-established engineering core classes has changed. With this trend certain combinations of engineering courses have become unfavorable in terms of course withdrawal and fail rates stemming from the interaction of course challenges. A wealth of data has been collected on this topic and will be utilized in this project. As one can imagine, the probability of success …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

A Review Of A Collaborative Online International Learning, Philip Appiah-Kubi, Ebenezer Annan

Engineering Management and Systems Faculty Publications

Globalization has exacerbated the need for engineers who are capable of working in a cross-cultural environment. Multinational companies continuously seek for engineers who are interculturally competent and capable of conducting business successfully in a cross-cultural environment. However, the skills required to be successful in a multicultural environment are difficult to be taught in the traditional classroom. One of the most effective approaches to acquiring intercultural competency skills is through experiential learning. It is, therefore, not surprising that most colleges all over the world are devoting resources towards the internationalization of their classrooms and the campus community. This ensures that students …